After a preliminary review of consumer complaints and other information related to alleged defects, NHTSA obtains information from the manufacturer(including data on complaints, crashes, injuries, warranty claims, modifications, and part sales) and determines whether further analysis is warranted. If warranted, the investigator will conduct a more detailed and complete analysis of the character and scope of the alleged defect.
NHTSA Action Number: DP20005
Date Opened: 2020-11-23
Date Closed: 2021-05-07
Manufacturer’s Name: Honda
(American Honda Motor Co.)
Component Description: STEERING
Recall Campaign:
Summary Description: Loss of Direction Control
Summary
The Office of Defects Investigation (ODI) received a petition dated October 19, 2020 requesting an investigation of an alleged defect in the steering system in Model Year (MY) 2013 Honda Accord vehicles. The petitioner alleges that MY2013 Honda accord vehicles are experiencing a sudden loss of steering control as the vehicle veers from its intended path of travel. The petitioner further alleges that this deviation from the intended path of travel occurs without warning or driver input while operating the vehicle under normal driving conditions. The petition itself can be reviewed at NHTSA.gov under ODI Number 11349961.On November 23, 2020, ODI opened a Defect Petition (DP20-005) to evaluate whether to grant or deny the petition. ODI sent two Information Request (IR) letters to Honda requesting information on steering anomalies in MY2013 Honda Accord vehicles and later MY2014-2015 Honda Accord vehicles.ODI performed extensive analysis on the information obtained from Honda as well as information in NHTSA's database.Based on ODI's review of the applicable materials, including responses to the IR letters sent to Honda, Vehicle Owner Questionnaires (VOQ) and Early Warning Reporting data, NHTSA has decided to grant the petition. ODI has opened an Engineering Analysis (EA21-001) to assess the scope, frequency and potential safety related consequences of the alleged defect, a sudden loss of steering control.The ODI complaints cited above can be viewed at www.NHTSA.gov under the following ODI identification numbers:11414105, 11406220, 11398736, 11387462 ,11387075, 11387049, 11375580, 11364698 ,11361125, 11351660, 11349961, 11327909, 11327170, 11324181, 11306112, 11301957, 11289067, 11282525, 11278511, 11277659, 11258017, 11256914, 11218752, 11208077, 11196050, 11194358, 11189901, 11165075, 11163481, 11156378, 11154891, 11131050
NHTSA Action Number: PE20021
Date Opened: 2020-11-23
Date Closed: 2024-12-13
Manufacturer’s Name: Thor Motor Coach
Component Description: EQUIPMENT
Recall Campaign:
Summary Description: Trimark 060-1650 Door Latch Failures
Summary
On November 23, 2020, the Office of Defects Investigation (ODI) opened PE20021 to investigate allegations of inoperative Trimark THP 060-1650 door lock/latches originally equipped on model years (MY) 2015-2017 Class A and Class C motorhomes.ODI received forty-six Vehicle Owner's Questionnaires (VOQs) describing consumers being locked in or out of their vehicles.The door latch, containing a die-cast zinc plunger, was produced by Equality during calendar years 2014-2016. The die-cast may become porous and brittle over time and can break without warning, causing the vehicle owner to be unable to open the recreational vehicle door equipped with the latch.If the motorhome does not have any other doors such as some Class A models, occupants could be trapped inside, needing to climb out using the emergency exits. If locked out, owners would be unable to easily get in and retrieve children and pets. ODI analyzed the data provided by Trimark in response to its January 27, 2021 information request letter.Although an elevated failure rate was evident on a specific combination of plunger bolt, door lock/latch assembly and door, the data showed that most failures occurred within the first two years of service on the affected 2015-2017 vehicles.This data suggests that component failures generally would have already occurred.Further, ODI data reflects a downward trend in complaints after calendar year 2018 and for post- MY 2016 vehicles.This downward trend may be attributed Trimark's actions in 2016 such as changes in the manufacturing process of its zinc plunger component for the relevant population and its 2016 decision to switch to a steel plunger. In view of the nature of early-life failure, and failure rate trending downward for model years 2017 and newer, this Preliminary Evaluation (PE) is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist.The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Read More...NHTSA Action Number: PE20020
Date Opened: 2020-11-22
Date Closed: 2024-08-12
Manufacturer’s Name: Tesla, Inc.
Component Description: SUSPENSION:FRONT:CONTROL ARM:LOWER ARM
Recall Campaign:
Summary Description: Fore Link Failure
Summary
The Office of Defects Investigation (ODI) opened this Preliminary Evaluation based on forty-three complaints alleging failure of the left or right front suspension fore links in Tesla model year (MY) 2015 through 2017 Model S and MY 2016 through 2017 Model X vehicles. The investigation has identified 426 instances of failure on part number 1041570-00-A or 1041575-00-A fore links.None of the instances resulted in any loss of vehicle control. One minor crash with no injuries is associated with the 426 instances fore link failures.A majority of the failures occurred between one to fifteen mph while parking in driveways or parking lots.In the eight instances where the vehicle was traveling more than 40 mph and the fore link failed, the vehicle remained controllable with no associated crash or injuries as a result. Tesla issued a consumer satisfaction bulletin (SB-17-31-001) on 10 February 2017, to replace the subject component on a sub-population of vehicles originally equipped with the subject fore links and built between 19 January 2016 and 25 May 2016.This sub population does not cover 75% instances of failures identified in this investigation. Additional damage to other vehicle components will occur if the vehicle is driven with this failed fore link.However no instance has shown that a failure of the fore link in this manner prevented the controllability of the vehicle in testing and reported failures. Based on this analysis,ODI is closing the investigation. ODI recommends that Tesla expand the terms of Bulletin SB-17-31-001 to cover all vehicles equipped with 1041570-00-A or 1041575-00-A fore links. This does not constitute a finding by the Agency that a safety-related defect is not present; the Agency will take further action if warranted by additional information received. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
NHTSA Action Number: EA20003
Date Opened: 2020-11-12
Date Closed: 2024-05-02
Manufacturer’s Name: Tesla, Inc.
Component Description: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Recall Campaign: 21V035
Summary Description: Loss of rearview camera
Summary
On November 20, 2020, the Office of Defects Investigation (ODI) opened Engineering Analysis (EA) 20-003 to investigate incidents of media control unit (MCU) failures resulting in loss of rearview camera in model year (MY) 2012-18 Tesla Model S and model year (MY) 2016-2018 Tesla Model X vehicles equipped with the NVIDIA Tegra 3 processor with an integrated 8GB eMMC NAND flash memory device. During its investigation, ODI learned that the expected usage life rating for the 8GB eMMC NAND flash memory device is approximately 3,000 "P/E" or Program-Erase cycles, after which the eMMC NAND flash memory device would become fully consumed and no longer be operational, leading to a failure of the media control unit (MCU). At a daily cycle usage rate of 1.4 per block, accumulation of 3,000 P/E cycles would take only 5-6 years. Historically, the expected life of a vehicle generally far exceeds 5-6 years of service. ODI believes that a 5- or 6-year life expectancy for a component integral to providing the driver with safety functions is insufficient. During our review of the data, Tesla provided confirmation that all units will inevitably fail given the memory device's finite storage capacity. Tesla provided its own statistical model showing the number of projected weekly MCU repairs from 2020 to 2028, estimating that replacement rates for MCU failures will peak in early 2022 and gradually decline until (near) full part turnover has been accomplished in 2028. According to Tesla, for subject vehicles equipped with the NVIDIA Tegra 3 processor with an integrated 8GB eMMC NAND flash memory device, the eMMC NAND cell hardware will fail when reaching lifetime wear, for which the eMMC controller has no available memory blocks necessary to recover. With this failure mode, the only recovery available is a replacement of the eMMC device, achieved by physical part replacement of either the MCU assembly or visual control module subcomponent. Tesla provided information concerning the effects of MCU failure on vehicle function, which include in loss of rearview/backup camera and loss of HVAC (defogging and defrosting) setting controls (if the HVAC status was OFF status prior to failure). The failure also affects the Autopilot advanced driver assistance system (ADAS) and turn signal functionality due to the possible loss of audible chimes, driver sensing, and alerts associated with these vehicle functions. Based on this analysis, ODI issued a Recall Request Letter (RRL) on January 13, 2021. The RRL was based on ODI's tentative conclusion that a defect related to motor vehicle safety exists in the subject vehicles because the eMMC NAND flash devices have a finite lifespan based upon the number of program/erase (P/E) cycles, after which the MCU fails due to memory wear-out, which constitutes a premature failure of safety-critical part. Tesla responded to the Recall Request Letter (RRL) on January 27, 2021, and disputed the tentative findings of the RRL. Nevertheless, on January 29, 2021, Tesla filed a safety recall (21V-035), recalling (MY) 2012-2018 Tesla Model S and (MY) 2016-2018 Model X vehicles with a center display equipped with a NVIDIA Tegra 3 processor and an 8GB eMMC NAND flash memory device. In this recall, Tesla is providing a free hardware remedy in addition to the over-the-air ("OTA") firmware updates that the company had previously implemented. NHTSA will continue to monitor the issue as part of its ordinary processes for overseeing the effectiveness of recalls. However, based on available information, at this time, Tesla's recall appears to address the unreasonable risk to motor safety presented by the premature failure of the component. Accordingly, the investigation is closed. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
NHTSA Action Number: PE20019
Date Opened: 2020-11-06
Date Closed: 2021-12-23
Manufacturer’s Name: General Motors, LLC
Component Description: SUSPENSION
Recall Campaign: 21V473
Summary Description: Rear Toe Link Adjuster Separation
Summary
On November 06, 2020, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE20-019) to assess the remedy and scope of General Motors (GM) recall 14V-571. ODI had received a total of 9 complaints with allegations of rear toe links separating while the vehicle was in motion. There were 4 complainants indicating that the remedy for recall 14V-571 had been performed on their vehicle. The other 5 complaints were outside the original recall scope but exhibited the same failure mode as addressed by recall 14V-571 and reported uncontrolled swaying while driving.ODI's review focused on all 2010-2015 Cadillac SRX vehicles that experienced a rear toe link failure while the vehicle was in motion under various driving conditions. The failures were the same or similar to those addressed by the remedy associated with recall 14V-571. The remedy for recall 14V-571 was to inspect the rear toe link adjusters and replace them if necessary as well as tighten both jam nuts to a manufacturer specified torque. The remedy can be reversed when the vehicle gets a rear alignment adjustment and the jam nuts are not properly re-torqued to the manufacturer's specification. ODI's data review confirmed a high toe link failure rate in vehicles that either had and had not received the remedy associated with recall 14V-571. On June 24, 2021, GM filed a defect information report recalling all 2010-2016 Cadillac SRX and 2011-2012 Saab 9-4X vehicles to remedy the potential failure of the rear toe link adjuster while driving. The remedy replaces adjustable toe links with non-adjustable toe links. The recall (21V-473) includes vehicles that were remedied under 14V-571. In view of the recall action being taken by GM, ODI is closing this Preliminary Evaluation. NHTSA reserves the right to take additional action if warranted by future circumstances.The ODI complaints cited above can be viewed at www.nhtsa.gov.The ODI identification numbers for the complaints cited above can be found in a separate document attached to this closing resume.
← Previous 1 … 33 34 35 36 37 … 1,059 Next →
Search NHTSA Database for Recalls
Search NHTSA Database for (TSB’s) Technical Service Bulletins
Technical Service Bulletins TSB’s List
Search NHTSA Database for Vehicle Complaints
- [2025 Newly Added 7 RESET FUNCTIONS] 2025 New Ver. obd2 scanner diagnostic tool CRP123X Elite ADD NEW SPECIAL FUNCTIONS for FREE--Throttle Adaptation, Oil Reset, SAS Reset, BMS Reset, Brake Reset, D-P-F Regeneration, ABS bleeding. Before the trip to the mechanic, launch obd2 scanner crp123x elite can do deeper diagnosis for the car system and react with accurate data in minutes. More, the list of compatible models has been expended. Upgrading frequency is regular, occurring monthly even weekly.
- [FCA AutoAuth &Free Updates for Lifetime]. LAUNCH CRP123X provides no-fee upgrades. Continually enhance vehicle diagnostic software, can diagnose 1996-2025 vehicles with a massive global vehicle database. With integrated AutoAuth, diagnose 2018+ FCA SGW-equipped cars.Yearly functional upgrades ensure CRP123X purchased years ago to keep up with newer diagnostic advancements. Beyond that, we'll always be working on behind-the-scenes bug fixes to drive your scan tool in excellent condition.
- [Accurate & Intuitive Multi System Diagnosis] Will you be confused about what happens when the warning light of transmission, ABS, and SRS Airbag check engine flashes? Launch obd2 scanner diagnostic tool CRP123X to pinpoint the problem components for a faster diagnosis for your car instead of taking your car to the dealership, and will turn off the warning light for you after fixing the problem, make to know more about your cars and do your own repair.
- [Multiple Display of Live Data + DTC Code Definition Explanation] Launch car tools show real-time data of oil temp, pressure, transmission temp, engine speed, coolant temperature, you will know which car part is abnormal. Data can be shown in a single, multi- graph, and merge two graphs for analysis（merge 4 PIDs in one). It’s convenient for car owners to purchase auto parts and replace it by yourself, 🔥Code Search,DTC Library provide massive information.
- [2025 Hardware Upgrade & One-click Recognition] Faster! Stable! CRP123X Elite car diagnostic scanner has a new processor, Android 8.1, 32GB of memory, 5-inch touchscreen (720P), 6100mAh rechargeable battery,. Wireless WiFi connection embarks on hassle-free faster renewing with one click. LAUNCH code reader effortlessly recognizes vehicle information( (vehicle make, model, and year info) through one-tap automatic VIN scanning, with no manual input, just swift and precise data at your fingertips.
- 【Recom-mended by YouTube Machinists】We are proud to tell that LAUNCH X431 PROS V+ 5.0 has been recom-mended as "" Per-fect Overall Car Diagnostic Scanner "" by famous editors, and also highly recom-mended by YouTube machinists.
- 【What Are the 2025 PROS V+ 5.0 Hardware Changes】With new in-house developed screen; 8.0 MP Pixel Rear Camera;Android 10.0 System; 2.4GHz&5GHz Dual-Frequency Wi-Fi, the transmission rate is 4Xfaster than old version; 4+64GB provides larger data memory; 6300mAh battery lasts 15+h work; CPU Updated to 2.0 GHz quard-core. greatly increased the speed of running multiple task; 8XFAST AUTO VIN technology;DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly
- 【Technology Itself is Proof of Quality】LAUNCH DBSCar VII+Self-developed screen.Using USB type A/USB type C connectors and DBSCar VII VCI connector can make the process of diagnosing and matching faster and more stable, DBSCar VII connector equipped with indicator lights, which is more intuitive and user-friendly. The latest self-developed screen from LAUNCH, in addition to its strong anti-fall ability, is different from other launch models in sensitivity and touch.
- 【2025 Newly Added CANFD】With the CANFD Connector, you can seamlessly diagnose a wider range of vehicle models (up to model year 2025, see image below for supported models) using advanced CANFD protocols. Gone are the days of being limited to certain models - now you can confidently handle the latest models, even those with the most advanced systems.
- 【Bi-Directional+Online Coding+Over 38 Reset Services+Adaptation+Initialization+ Matching】PROS V+ 5.0 scan tool Elite also support:K-EY programming,Gear/ SAS/ EPB/ TPMS/ BMS/ETS/Oil/Brake/AFS/GEARBOX/SUNROOF/SUS Reset,ABS Bleed, Injector coding.Gives you the ability to use dealership level relearn procedures to complete repairs.You can get 100+ advanced special functions under the""vehicle brand""-""menu""-""system"" - ""special functions"".
- 【2025 UPGRADED VERSION, NEW CHIPS, ADD MORE FUNCTIONS, No Extra Software Fee】Faster! The 2025 CRP123I V2.0 car diagnostic scanner has a new processor, Android 8.1, 32GB of memory, 5-inch touchscreen (720P), 6000mAh rechargeable battery, One-touch Wi-Fi Lifetime Free update for more vehicle coverage, bug fixes,newly added parameters, and functionality to help you access, diagnose and fix more vehicles faster,upgrade of CRP123I.
- 【Newly Added 7 RESET FUNCTIONS】+ 【BATTERY VOLTAGE TEST】2025 New Ver. scan tool CRP123I V2.0 ADDS NEW SPECIAL FUNCTIONS-Throttle Adaptation,Oil Reset,SAS Reset,ABS Bleeding,BMS Reset,EPB Reset, D.P.F Regeneration,to maintain your vehicle system safely and efficiently.Graphing the battery voltage easier and more intuitive for the real-time monitors to check.It does not only reveal what error codes your car is producing,but also erase your vehicle's check engine light after the problem is fixed.
- 【Multi System Diagnostic Tool】LAUNCH CRP123I V2.0 obd2 scanner check ABS/SRS/AT/ENG systems &10 OBD2 modes, read/clear fault codes,Online Google Search, 4 IN 1 Graphing.Store and playback of dynamic data stream help to quick analysis and diagnosis. Generate vehicle health reports with one click and share them with your email via W-ifi which helps avoid blind maintenance. CRP123I costs less, in the long run, saving you up to $2000 each year.
- 【Fre-e Lifetime Update + AutoAuth for FCA SGW+ Auto Vin】This scan tool features One-click w-ifi update and fre-e for fixing more bugs; Realtime battery voltage graphing helps to Judge the state of the battery; Auto Vin,facilitate accurate diagnosis and provide useful information.Besides,CRP123I V2.0 support AutoAuth for FCA SGW,For 2017 and later FCA Vehicles with Secure Gateway Module (SGW),with no limitation.
- 【Cover 10000+ Models & 90+ Car Brands】CRP123I V2.0 Elite launch scanner is capable of diagnosing fault codes on more than 10000+ vehicles from 1996 to 2025 and 90+ car makes worldwide. Support almost all OBDII cars such as SUVs, minivans, light-duty trucks, etc. It's an excellent tool for all types of mechanics from novice to pros. NOTICE: Compatibility will vary on vehicles' model and year, pls c-ontact us via Q&A/message before purchase.
- 【J2534 PROTOCOL WITH SMARTLINKC】 LAUNCH X431 PRO3S+ ELITE scan tool with newly upgraded smartlinkC V2.0. The SmartLinkC is a communication interface supporting J2534 specifications. Of course, it also can be used as a J2534 PassThru device, working together with the PC installed with the OEM diagnostic software to perform the J2534 protocol.J2534 protocol is the only solution for problems ranging from driveability and loss of power to poor fuel economy.
- 【INTELLIGENT TOPOLOGY MAP TO FASTER FULL SYSTEMS DIAGNOSIS】 X431 PRO3S+ELITE bidirectional scan tool with new-added intuitive topology mapping. Harnesses intuitive topology mapping for comprehensive visualization of the vehicle all system. It shows all available control units in different colors, the numbers of system, the scanned system, and the scan results, bringing maximum convenience & superfast speed for you to do swift diagnosis & high-level repairs.
- 【TOP HARDWARE CONFIGURATION, UPGRADED OF LAUNCH X431 PRO3S+】 LAUNCH X431 PRO3S+ELITE diagnostic scanner possess with Android 10.0 OS; CPU 4-Core Processor, 2.0 GHz. Greatly increased the speed of running multiple task. 2.4GHz/5GHz; 6300mAh/7.6V stronger battery capacity; 10.1 Inch Touchscreen with 8MP camera; AUTO VIN; 4GB+64GB storage memory; 20X faster transmission rate, save more vehicle documents and customer data; Supports 25+ Software Languages, such as EN, DE, FR, SP nd JP and so on.
- 【3000+ ACTIVE TEST/BI-DIRECTIONAL CONTROL LAUNCH SCANNER】 LAUNCH X431 PRO3S+ELITE HD automotive scanner is a cost-effective bidirectional scanner that deserves owned by every repairing DIYers and mechanics. You can easily send command signal at fingertips from the scanner to various module actuators to test component integrity and functionality in minutes or even seconds to tell if replacement or repair is needed.
- 【COMPLETE 60+ HOT RESETS, CALIBRATION, INITIALIZATION, RELEARN】 LAUNCH X431 PRO3S+ELITE SmartLinkC escaner automotriz professional enjoys 60+ special service, such as Oil Reset, ABS brake bleed, EPB, SAS, BMS, Suspension, Injector reset, Power Balance, Turbo Calibration, VGT, Transmission Adaption, Throttle Adaptation, matching and etc. rigorous on-site testing has been performed to ensure 100% availability.
This product presentation was made with AAWP plugin.
Last update on 2025-04-22 / Affiliate links / Images from Amazon Product Advertising API
