“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V309
Manufacturer Motor Coach Industries
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 1,105
Exhaust Bellow Pipes may Leak Exhaust
If the pipe develops a hole, during a regeneration cycle, hot exhaust gases may leak out, increasing the risk of a fire.
Summary
Motor Coach Industries (MCI) is recalling certain 2011-2016 D4500, D4505, D4000, D4005, and D4000 ISTV motor coaches equipped with ISX engines. Due to vibrations, the exhaust bellow pipes develop a hole.
Remedy
MCI will notify owners, and dealers will replace the bellows pipe assembly with an improved part, free of charge. The recall is expected to begin June 15, 2018. Owners may contact MCI customer service at 1-800-241-2947.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Acknowledgement
June 5, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V309-1723.pdf
“This site contains affiliate links for which OEMDTC may be compensated” |
- [High Quality and Durability]The exhaust pipe clamp is made of high-quality stainless steel, which is rust proof, waterproof, durable, and corrosion-resistant. It can be reused and has a long service life.
- [6 Specifications]Our 2.5 inch exhaust clamp connects a pipe with an outer diameter of 2.5 "to a pipe with an outer diameter of 2.5". We have a total of 6 different sizes of exhaust clamps for you to choose from and purchase. Please confirm the specifications and dimensions before purchasing.
- [Design Features] This stainless steel clamp band clamp is designed with a 360 degree full clamping zone, and the clamping force is evenly distributed throughout the entire 360 degree range to prevent leakage and control pipeline deformation.
- [Easy to Install] This exhaust band clamp sleeve comes with fastening bolts. You only need to tighten or lose the bolts to connect or release. No welding required, easy to use.
- [Application] Sealed exhaust clamps are maintenance components for silencers. Narrow band clamps can be used for catalytic converters, exhaust nozzles, exhaust manifolds, exhaust resonators, exhaust hoses, and exhaust muffler maintenance projects.
- [High Quality] Stainless steel lap joint exhaust pipe clamp is made of high-quality 304 stainless steel and galvanized, which can resist water corrosion and rust.
- [Various Specifications] Our 2.5-inch exhaust pipe clamp connects 2.5 "OD pipe to 2.5" OD pipe. In addition, we provide three different sizes to meet your needs. Please confirm the specification and size before purchasing.
- [Easy to Install] The exhaust pipe clamp is designed without welding, which is fast, convenient and accurate. It allows flexible disassembly and repair, and can be reused.
- [Unified Structure] These exhaust pipe clamps have a unified structure, which minimizes the complexity of the number of parts, and maximizes the material efficiency, thus reducing the weight.
- [Features]The butt clamp is a simple and effective method to connect exhaust system components (such as pipes, mufflers and catalytic converters). The reaction block provides a 360 ° uniformly distributed tensile force to prevent pipe deformation and form a seal around the connected exhaust components.
- Product Size:Universal fitment 2.5",joins 2.5"outer diameter pipe to 2.5"inner diameter pipe.
- High-quality Material:Made from high-quality 304 stainless steel,DecoHongDi muffler band clamp ensures thickness,durability,corrosion resistance,and anti-rust properties for long-lasting performance.
- Easy Install And Remove:DecoHongDi Lap Joint exhaust muffler band clamp adopts a non-welded design,make it easy to install or disassemble on exhaust system without any welding required.Just tighten the bolt,which is convenient and will saves your time and labor.
- Excellent Sealing Performance:I-shape metal block make the force of 360 evenly distributed,it can hold the pipe tightly and provides a good seal.
- Reliable Repair Solution:Our exhuast muffler clamp is perfect for various components of the exhaust system,including muffler pipes,catalytic converters,etc.
- Walker 35337 Exhaust Clamp for Ford F-150
- COMPATIBILITY – Fits 1994-1994 Land Rover Discovery; 1995-1995 Land Rover Discovery; 2002-2002 Land Rover Freelander; 2003-2003 Land Rover Freelander; 2004-2004 Land Rover Freelander; 2005-2005 Land Rover Freelander; 1990-1990 Land Rover Range Rover; 1991
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- CONNECTS EXHAUST PARTS -- Provides a tight connection that inhibits leaks
- AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for a quality vehicle repair
- Size: joins 3.0" OD pipe to 3.0" ID pipe, width of strap: 2.94inch /74.82mm.
- Application: Lap joint clamp is a simple, effective way to connect exhaust system components such as pipes, mufflers, catalytic converters etc.
- Advantage: No welding design, easy to install or remove.
- Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.
- Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.
- Size: Joins 2.5" OD pipe to 2.5" OD pipe, width of strap: 3inch /76.2mm.
- Application: Butt joint band clamp is a simple, effective way to connect most of exhaust system components. Aslo can be used for muffler repair.
- Advantages: No welding design, easy to install or remove.
- Material: 304 stainless steel band, zinc-plated M10 bolt and nut, steel gasket, aluminum alloy I-block.
- Feature: The band clamps make the force of 360 evenly distributed, provides a seal and prevents material deformation.Torque: 63 N·m.
- Walker 36522 Exhaust Clamp for Chevrolet Silverado 1500
- COMPATIBILITY – Fits 2005-2005 Chrysler 300; 2006-2006 Chrysler 300; 2007-2007 Chrysler 300; 2008-2008 Chrysler 300; 2009-2009 Chrysler 300; 2010-2010 Chrysler 300; 2008-2008 Dodge Challenger; 2009-2009 Dodge Challenger; 2010-2010 Dodge Challenger; 2006-2
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- SUPERIOR SEAL -- Provides superior 360° clamping and sealing on muffler inlets, outlets, elbow joints and pipe
- AVAILABLE IN DIFFERENT SIZES -- Offered in a variety of styles and sizes for your vehicle repair needs
- Package Includes: One Piece 2-1/2” stainless exhaust clamp(normally fit for OD 2.5" exhaust pipes, according our test, this clamp can also be used on Our ID 2.5 exhaust adapter).
- Made of T201 stainless steel with heavy duty U-bolt saddle design. The 2.5“ exhaust hanger on exhaust with reinforced ribs on the saddle flange, expertly crafted and durable construction for long service. The high quality and craftmanship of the heavy duty clamp can resist corrosion and out of shape during use.
- The stainless clamp is consisted of u-bolt, saddle flange and 3/8 Nuts.
- Please check the detail information as belows. We value your shopping experience and strive to offer high quality product with sincere service. If you have any questions, please contact us.
- Material:304 stainless steel band, zinc-plated carbon steel M10 bolt,Double stack self-locking lock washers and nut, carbon steel gasket, aluminum alloy I-block.
- Size:Joins 2.25" OD pipe to 2.25" OD pipe, width of strap: 3inch /76.2mm.
- Advantages:No welding design, easy to install or remove.Double stack self-locking lock washers keep the nut from loosening.You will get Vitonsbay 2.25 Inch Butt Joint Exhaust Band Clamp, welcome guide,our worry-free 6-month warranty, and friendly customer service.
- Feature:The exclusive reaction block provides a full 360° equal distribution of stretching forces, prohibiting pipe distortion while completing a seal around the joined exhaust components.Torque: 63 N·m.
- Application:Butt joint band clamp is a simple, effective way to connect most of exhaust system components.
Last update on 2024-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.