NHTSA Campaign Number: 18V301
Manufacturer Daimler Trucks North America LLC
Components EQUIPMENT ADAPTIVE
Potential Number of Units Affected 1,688
Wheelchair Lift can be Used when not in Park
If the vehicle can be moved while the wheelchair lift is being used, there is an increased the risk of injury.
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2018 Thomas Built Buses Minotour school buses built on a Ford chassis and equipped with an optional wheelchair lift. The wheelchair lift may be allowed to operate when the vehicle is in neutral or drive, due to missing relay in the interlock wiring harness.
Remedy
DTNA will notify owners, and dealers will inspect the wheelchair lift wiring, correcting it as necessary, free of charge. The recall is expected to begin on July 6, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-770.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
Defect Information Report
May 8, 2018
https://static.nhtsa.gov/odi/rcl/2018/RMISC-18V301-5225.pdf
Recall Acknowledgement
May 31, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V301-4802.pdf
- MOUNTED CARGO HITCH CARRIER: Designed with easy loading and transporting in mind, our cargo carrier comes equipped with a 42” long loading ramp for wheelchairs, scooters, lawn mowers, small wheeled equipment that also folds up towards the carrier platform after equipment is loaded. Fits into a 2” Class III receiver only, will not work in 1 ¼” hitches.
- MAXIMUM 500LB CAPACITY: This folding cargo carrier can support up to 500 lbs due to its heavy duty steel construction. Use easily as a wheelchair ramp or hitch luggage rack. Weight must be centered and evenly distributed on the platform.
- EASY TO USE: Spring loaded locking pins make this hitch hauler easy to fold, open and lock the ramp in place when in use and carrier folds up towards the vehicle when not in use and storage.
- SAFETY AND SECURITY: Two round reflectors are located on the back for visibility and safety when using at night. With 10 tie down points available for safety straps you will have plenty of ways to secure your cargo.
- DIMENSIONS AND WEIGHT: Outside dimensions of the cargo carrier measure 48" long x 27 ¾” wide x 4" high with the platform measuring 46.5" long x 27 ½" wide and the ramp measures 42" long. Total weight of carrier is 75 lbs.
- Weight-sensitive platform, automatically folds when lifted without a scooter on the platform
- Easy to install and adjust, can also be reinstalled if you purchase a new vehicle
- License plate mount included - made in the USA weight capacity 350 lbs.
- Adjustable, adapts to a three or four-wheel scooter without scooter modifications
- Easily carry scooters and wheelchairs behind any car or truck with a Class III or IV 2" hitch receiver
- Folds upright against vehicle when not in use to make driving and parking easier
- Includes an anti-rattle device, 5/8" hitch pin, exclusive ergonomically designed T-handle spring pull pin and 10 tie-down points for maximum security
- Manufactured from durable, powder-coated steel with a 400 lb. weight capacity
- Platform measures 48" L x 27-3/4" W, loading ramp measures 42" L x 27-1/2" W
- Freedom Auto Lift with a Class III Hitch receiver configuration (VITAL INFO NEEDED)
- Aluminum deck size 27.5" X 39", Adjustable cradle extends up to 46” - adapts to a three or four-wheel scooter without scooter modifications
- Weight-Sensitive Platform, automatically folds when lifted without a scooter on the platform
- Easy to Install & Adjust, can also be reinstalled if you purchase a new vehicle
- License plate mount included - Made in the USA - weight capacity 350 lbs.
- For scooter or powerchair transport up to 42" x 27" wheelbase
- Works with Class II, III, or IV vehicle hitch receivers
- Includes self-tension retractors, manual crank backup, license plate holder
- Safely supports up to a maximum 350 lbs
- Durable and reliable construction - Made in the USA
- Durable black powder coated finish,heavy duty steel construction. It can be used as a carrier and a ramp; simply attach it to your hitch. Provides instant cargo space when your car is out of space.
- Folding ramp can also be locked flat when not in use. 3-position carrier (closed flat, open L-shape & open flat.Tie down straps can be hooked onto any of the tie down holes featured on the ramp sides. Handle on the ramp for easy folding and unfolding.
- Fits All 2" Receiver, Hitch Class III Or IV. Has a 3 inch safety rail. Highly recommended for heavy duty cargo like generator to fix in the middle position.
- Weight Capacity of Ramp: Up to 400 lbs.Total length of ramp when expended is 42 inch. Total weight of carrier 75 Lbs; Weight of ramp (gate) 16 lbs.
- Never exceed the rated capacities of your hitch. Hitch tightener is required to prevent the rack from wobbling,anti wobble plate is not included.
- For wheelchair, transport chair, side-fold rollator
- Fits 1¼" Hitch Receiver. 2"Adapter available
- Car carrier rack allows fully visible taillights
- Hitch-Mount -- full trunk access when not in use
- Keeps Your Mobility Device Safe and Secure
- PREMIUM MATERIAL LIFT SLING TRANSFER BELT - Constructed with strong nylon webbing, the belt stitching is reinforced for exceptional durability. The transfer gait belt back is four inches wide to provide a comfortable experience with greater area of contact to easily disperse pressure. The extra width also enables the belt to handle a higher weight load and not ride up on the patient’s sides.
- GAIT BELT TRANSFER BELTS MAKE TRANSFERS EASIER - Simple, lightweight and convenient. Aids with transitions from bed, chair, car, walker, bathroom, etc. Versatile—use to also help re position in bed, chair.
- HELPS PREVENT CAREGIVER STRAIN - The most common injuries caregivers experience are to the back, neck, and shoulders, often caused by lifting/ pulling motions. Proper use of the Transfer Belt/Sling by Shorewood Medical can help prevent these strains.
- COMFORTABLE, WIDE DESIGN - Non slip and PADDED. Unlike some belts, which can be difficult to fasten and put force on a small area, this Transfer sling/belt is wide and comfortable and won’t slide up.
- WARRANTY - If you are not satisfaction with our transfer aid sling in anytime, feel free to contact us, you will get a full refund or a new replacement with no question asked.
- VERY IMPORTANT: PLEASE reference our Slide 'n Ride Measurement Guide and Vehicle Compatibility List BEFORE PURCHASING because our product DOES NOT FIT EVERY VEHICLE. Compatible with most sedans and lower height SUV's, Vans, and Trucks.
- A transfer seat that is safer and more stable than a transfer board. Use your upper body strength or caregiver assistance to shuffle from our product into and out of a vehicle. Weighs (14 lbs.), folds, and easily stores behind the seat or in the trunk. 500lb. Rated.
- Helps caregivers safely assist passengers while entering and exiting a vehicle. The Slide 'n Ride sets up to a fixed position and DOES NOT SWIVEL. Smaller stature people may still need a step or assistance getting onto the Slide 'n Ride.
- Durable engineering with stainless steel components and patented latching system.
- Health & Flexible Savings Account eligible and saves on the cost of medical transportation.
Last update on 2021-01-24 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2021-01-24 / Affiliate links / Images from Amazon Product Advertising API