“This site contains affiliate links for which OEMDTC may be compensated” |
May 26, 2022 NHTSA CAMPAIGN NUMBER: 22E044000
Helmets May Not Adequately Protect User/FMVSS 218
A helmet that does not provide adequate protection increases the risk of injury during a crash.
NHTSA Campaign Number: 22E044
Manufacturer Milwaukee Performance Helmets
Components EQUIPMENT
Potential Number of Units Affected 340
Summary
Milwaukee Performance Helmets (Milwaukee Helmets) is recalling certain size large model MPH9720DOT and size small model MPH9721DOT helmets. The helmets may lack proper retention system integrity, penetration protection, and labels. As such, these helmets fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 218, “Motorcycle Helmets.”
Remedy
Milwaukee Helmets will offer a refund of the purchase price. Owner notification letters were mailed on June 9, 2022. Owners may contact Milwaukee Helmets customer service at 1-800-990-7423 or Helmet-recall@shafinc.com.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
IMPORTANT SAFETY RECALL
This Notice applies to your Milwaukee Helmets item number
MPH9721DOT size SMALL and MPH9720DOT size LARGE
NHTSA Recall No. 22E044.
06/15/2022
Dear Helmet Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Milwaukee Helmets has decided that certain sizes of MPH9721DOT size SMALL and MPH9720DOT size LARGE produced after Jan 2019 has failed to comply with the Federal Motor Vehicle Safety Standard No, 218, Motorcycle Helmets: Note This recall only affects the above-mentioned sizes.
WHY DOES MY HELMET NEED REPLACING/REFUND?
During routine testing a defect in the manufacture of the MPH9721DOT size SMALL and MPH9720DOT size LARGE helmets was detected. The defect allowed a sharp object to penetrate the rigid protective outer shell and or having the retention system fail under continued force during a random sample test performed by a NHTSA independent lab.
SAFETY RISK:
During a crash the motorcycle rider or passenger could experience a head injury that might range from insignificant to extreme, including the possibility of death.
REMEDY:
If you own a MPH9721DOT size SMALL and/or MPH9720DOT size LARGE motorcycle helmet purchased after the date of 03/10/2019, please provide the receipt of your purchase and a photo of the helmet with the retention strap cut off and the manufacturer will make a complete refund of the purchase price. There is no need for you to return the helmet. Just cut off the strap send us a photo as proof and then discard the helmet.
WHAT SHOULD YOU DO?
Please contact the Recall Information Center in one of the following ways:
By email:
Helmet-recall@shafinc.com
By USPS
Milwaukee Helmets
34 Owens Dr, Wayne NJ 07470
WHO SHOULD YOU CONTACT WITH FURTHER QUESTIONS OR CONCERNS?
If you have questions or concerns about this recall, please contact Recall Information Center at 800-990-7423 or email us at: Helmet-recall@shafinc.com
If your dealer or the Recall Center fails or is unable to remedy this defect without charge, or within a reasonable amount of time, you may submit a written complaint to:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey AVE SE
Washington, DC 20590
You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov.
WHAT IF YOU NO LONGER OWN THE VEHICLE?
If you no longer own the helmet, please contact us by using either of the methods outlined above and inform us of the ownership status.
We apologize for any inconvenience and thank you for your attention to this safety matter.
Sincerely,
Mohammed Atif
Recall Manager
Milwaukee Helmets
Chronology :
we have never had a failed test of any samples that was made before the production. the only failed event occurred was from the random test that was performed by NHTSA compliance division
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
MPH | MOTORCYCLE HELMET |
9 Associated Documents
Recall Acknowledgement
RCAK-22E044-8610.pdf 645.515KB
Noncompliance Notice 573 Report
RCLRPT-22E044-7734.PDF 214.981KB
Recall Quarterly Report #1, 2022-2
RCLQRT-22E044-7146.PDF 239.327KB
Manufacturer Notices(to Dealers,etc)
RCMN-22E044-5226.pdf 318.974KB
Recall Quarterly Report #2, 2022-3
RCLQRT-22E044-9423.PDF 211.245KB
Recall Quarterly Report #3, 2022-4
RCLQRT-22E044-2850.PDF 211.324KB
Recall Quarterly Report #5, 2023-2
RCLQRT-22E044-8288.PDF 211.752KB
Recall Quarterly Report #4, 2023-1
RCLQRT-22E044-5975.PDF 211.752KB
Recall Quarterly Report #6, 2023-3
RCLQRT-22E044-5008.PDF 211.752KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22E044&docType=RCL
- High Resistance ABS Shell With Micrometrically Adjustable Strap
- Meets or Exceeds FMVSS-218 and DOT Safety Standards
- Helmet Liner / Cheek Pads are Lightweight, Soft and Easily Removable and Washable
- Sleek and Lightweight Design Reduces Wind Noise
- Modular Flip-Up Function Anti-Scratch, Anti-Fog and Wide View Clear Visor
- Boasting a compact, aerodynamic DOT shell design with sharp and aggressive styling for impeccable impact protection to excel whether short-distance street performance or long-distance touring comfort.
- Multiple conscientiously designed ventilation panels effective in streamlining the cooling process to assist with freshening the rider's experience. Large lower vent shutters for ease of use with riding gloves.
- Trendsetting springs for precise functionality ensuring a superior wind and water sealant layer. Unique 3D molded shield designed to ensure a distortion-free view throughout the entire field of vision.
- Removable Breath Guard rerouting the rider’s breath to reduce shield fogging. Inserted Chin Curtain designed to reduce wind turbulence and noise. Quick-Release Chin Strap for effortless usage.
- Fully removable, washable, and replaceable microfiber inner material that absorbs sweat without compromising comfort or security.
- 【Lightweight】Ultra Lightweight and Durable ABS Shell + Multi-Density EPS liner to meet or exceed FMVSS-218 and DOT Safety Standards.
- 【Ventilated】Multiple vents for optimum ventilation and quick release metal buckle offer solid protection.
- 【Removable & Washable】Equipped with fully removable, washable, and replaceable inner liners that are breathable and absorb sweat.
- 【Protective】The helmet comes with One tinted shield which is on the helmet, beautiful glossy UV protective finish.
- 【Detachable】The nose protector on the helmet can be removed if you needn't it.
- Advanced Safety Design: Combines a lightweight ABS outer shell with a high-density inner shell for top-tier head protection.
- DOT Approved, Clear Vision: Meets DOT standards, available in Size S (58-60CM/22.8-23.6 Inch), with a scratch-resistant, anti-fog lens for optimal visibility.
- Easy Quick Release: Convenient quick-release chin strap with adjustable features for effortless and speedy helmet adjustments and removal.
- Comfort Tech Wick-Dri System: Enjoy superior comfort with a removable head liner designed for a personalized fit within the shell configurations.
- Sun Visor for Added Protection: Built-in pull-down sun visor system provides effective sun protection, ensuring a comfortable and shaded ride.
- 【High-quality Material】 Safety material, ABS engineering material, breathable, odorless, impact resistance, high heat resistance, high strength, light weight, enhancing safety and comfort during riding.
- 【Helmet cushioning layer】The high-density EPS cushioning layer can better cushion the impact force, effectively absorb the external impact force, reduce the impact of the head.
- 【Comfortable texture lining】 mesh structure breathable lining, more comfortable and fashionable, high-density fiber tissue, sweat-absorbing and odor-proof, ensuring safety and taking into account the breathability of the helmet.
- 【Scope of Application】The german motorcycle helmet weighs only 1 pounds, which helps to reduce neck fatigue during long-distance travel or urban cycling commuters. This helmet for adults, youth, men and women. Motorcycles, mopeds, bicycles, cruisers, chopper, scooters.
- 【Customer Service】We have full confidence in the quality of half helmet, If you encounter any problems, please feel free to contact our customer support! We will provide you with the perfect solution! 100% satisfaction guaranteed, please rest assured to buy.
- DOT Certified - Your Safety Comes First: Favoto full face motorcycle helmet is DOT approved and compliant with the FMVSS 219 Standard. Crafted with a robust ABS shell and fortified with a high-density EPS cushion layer, it provides unmatched protection for riders.
- Lightweight Design for Comfortable Rides: Weighing a mere 2.76 lbs, our helmet is meticulously designed to alleviate pressure on your head and shoulders. Bid farewell to discomfort during extended rides, especially in the neck area, enabling you to effortlessly tackle long journeys with ease.
- Aerodynamic Ventilation for Uninterrupted Journeys: Our helmet features strategically positioned vents on the front, top, and back to keep you cool during demanding rides. With an innovative one-handed control, you can effortlessly open or close the ventilation slits, reducing wind resistance and minimizing road noise for an undistracted journey.
- Washable and Comfortable Inner Liners: The interior of our helmet is adorned with ultra-soft, breathable inner liners that conform to your facial contours and head shape. These removable liners not only ensure a perfect fit but are also conveniently washable. The quick-release buckle on the chin strap adds to the convenience of wearing and removing the helmet.
- Find Your Perfect Fit with Multiple Sizes: Available in M (57-58 CM, 22 2/5-22 4/5 INCH), L (59-60 CM, 23 1/5-23 1/2 INCH), XL (61-62 CM, 24-24 3/8 INCH), and XXL (63-64 CM, 24 3/4-25 1/5 INCH) sizes. Refer to the size chart to choose the helmet that perfectly suits you.
- DOT Approved; Size L (57-58 CM,22.4/22.8 Inch)
- Advanced Modular/Flip up and Dual Lens Design (inner smoked lens/outer clear shield);
- Light Weight Durable Aerodynamic Thermoplastic Alloy Shell
- One Extra Spoiler Included, Easy Conversion Between Street and Sports Style
- Removable and Washable Padding
- ABS shell: Safety material, ABS engineering material, breathable, odorless, impact resistance, high heat resistance, high strength, light weight, enhancing safety and comfort during riding.
- Comfortable to Wear: Motorcycle open face half helmet is equipped with an adjustable quick release chin strap, excellent wearing feeling, The helmet use comfortable and soft lining, breathable, sweat-absorbing, ensuring safety and taking into account the breathability of the helmet.
- Lightweight Design: The beanie helmet weighs only 850g to reduce fatigue caused by nerve pressure for long-distance motorbike or urban cycling commuters.
- Safe Riding Skull Cap: Skull cap helmet can be used by adult men and women. It is suitable for motorcycles, scooters, street cars, mopeds, Four-wheeled vehicle.
- After-sales Service: If the helmet size is not suitable, we provide free replacement service. Before confirming that the helmet is suitable, try to keep the packaging intact, so as not to affect the exchange, thank you for your understanding.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-044
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Milwaukee Performance Helmets
Submission Date : MAY 25, 2022
NHTSA Recall No. : 22E-044
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Milwaukee Performance Helmets
Address : 34 Owens Dr
Wayne NJ 07470
Company phone : 9732496100
Population :
Number of potentially involved : 340
Estimated percentage with defect : 100 %
Equipment Information :
Brand / Trade 1 : MPH
Model : MPH9720DOT
Part No. : MPH9720DOT
Size : Large
Function : Head protection
Descriptive Information : Recall decision was made after failures resulted from a random sample test at a
NHTSA contract testing lab.
Production Dates : JAN 01, 2019 – FEB 03, 2019
Brand / Trade 2 : MPH
Model : MPH9721DOT
Part No. : MPH9721DOT
Size : Small
Function : Head Protection
Descriptive Information : Recall decision was made after failures resulted from a random sample test at a
NHTSA contract testing lab.
Production Dates : JAN 01, 2019 – FEB 03, 2019
Part 573 Safety Recall Report 22E-044 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Noncompliance :
Description of the
Noncompliance :
Helmet failed the Retention System Outlined in the FMVSS-218: (a) The
retention system on the low temperature, high temperature and water
immersed samples separated while loaded.
Helmet Failed the Labeling Failures Outlined in the FMVSS-218; The helmets
failed the labeling requirements because they were not labeled with the
following information:
Helmet Failed the impact attenuation Failures Outlined in the FMVSS-218;
FMVSS 1 : 218 – Motorcycle helmets
FMVSS 2 : NR
Description of the Safety Risk : Any other helmets that are part of the recall population carry the risk of
serious head injury
Description of the Cause : In the case of the labeling failure, the cause was a missed update to the labeling
requirements of FMVSS-218.
In the case of the retention system failure there is uncertainty as to why the
sample helmet failed in the contract lab, but never before during a large
number of production batch tests performed in strict accord with FMVSS-218.
In the case of the Retention failure the fabricating manufacturer can only
assume that the retention system was not placed properly by the workshop
that was reponsible for manufacturing it in Early 2019.
In the case of the Impact Attenuation failure we do not know as to why the
sample helmet failed in the contract lab, but never before during a large
number of production batch tests performed in strict accord with FMVSS-218.
In the case of the Imapct failure. The manufacturer can only assume that the
Shell of the helmet had a previous un known defect during manufacturing it in
Early 2019.
In an abundance of caution, we are proposing to recall all helmets
manufactured after that date.
Identification of Any Warning
that can Occur :
NR
Involved Components :
Component Name : Retention System
Component Description : metal ring made of iron
Component Part Number : MR-01
Part 573 Safety Recall Report 22E-044 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Component Name : Helmet outer shell
Component Description : outer shell of the helmet
Component Part Number : NR
Supplier Identification :
Component Manufacturer
Name : Kylin Motorcycle Fittings Co. Ltd
Address : No 100 Haiqiao rd. Niubidong
Yueqing Zhejiang Foreign States 325600
Country : China
Chronology :
we have never had a failed test of any samples that was made before the production. the only failed event
occured was from the random test that was performed by NHTSA complaince division
Description of Remedy :
Description of Remedy Program : there are only 3 defects:
1. is the label test failed where the manufacturer has not filed the Part 566
with NHTSA
2. The helmets tested failed the retention integrity test under load.
3. The Helmet tested failed the Impact Attinuation on 2.1 ms at 200g
As a remedy we will offer full refund to each end-user of their purchase
price and collection of the offending helmets.
How Remedy Component Differs
from Recalled Component :
There will be no remedy equipment. The recalled helmet is a unique use
helmet for which no other models are made.
Identify How/When Recall Condition
was Corrected in Production :
The recall condition will not be corrected. Instead the importer has
chosen to no longer offer this category of helmet for sale.
Recall Schedule :
Description of Recall Schedule : we are planning to inform all the dealers and the owners starting the
06/25/2022
Planned Dealer Notification Date : JUN 25, 2022 – SEP 25, 2022
Planned Owner Notification Date : JUL 25, 2022 – OCT 25, 2022
Part 573 Safety Recall Report 22E-044 Page 4
The information contained in this report was submitted pursuant to 49 CFR §573
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : Kylin Motorcycle Fittings Co. Ltd
Address : No 100 Haiqiao rd. Niubidong
Yueqing Zhejiang 00 325600
Country : CN
Company Phone : 57757571777
* NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END