910027 – Sharp Cabinet Handles May Cause Injury – 2020-2021 Grand Design Imagine Travel Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

January 28, 2022 NHTSA CAMPAIGN NUMBER: 22V039000

Sharp Cabinet Handles May Cause Injury

Sharp handles could scrape or cut an occupant, increasing their risk of injury.

 

NHTSA Campaign Number: 22V039

Manufacturer Grand Design RV, LLC

Components STRUCTURE

Potential Number of Units Affected 20,144

 

Summary

Grand Design RV, LLC (Grand Design) is recalling certain 2020-2021 Imagine travel trailers. The cast aluminum pull handles on the cabinet doors and drawers may have sharp edges.

 

Remedy

Dealers will replace the handles, free of charge. Owner notification letters were mailed March 14, 2022. Owners may contact Grand Design customer service at 1-574-825-9679. Grand Design’s number for this recall is 910027.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Safety Recall #22V-039

Repair, Claim Preparation & Filing Instructions 

 

Please complete a warranty claim pre-authorization request using the following codes & labor times:

 

REPAIR INSTRUCTIONS:

Replace the cast aluminum square edged handles on the cabinet doors and drawers with a handle that has a rounded profile.

 

PARTS:

P/N 662704 (This is not a complete assembly kit, must order replacement quantity needed. Screws from original handles to be reused)

 

Please follow attached repair instructions.

 

Promptly submit all pre-authorizations/claims through our Dealer Portal.  If you have any questions or need assistance, please call our Technical Service Team at 574-825-9249.

 

Tools Needed: Tape measure, Philips’s screwdriver, drill with 1/16” drill bit, screw gun (optional)

 

Step 1:

Measure to the center of the existing handle from the closest edge of the door or drawer. Mark the position with a pencil mark or small piece of tape.

 

Step 2:

Using a screwdriver or screw gun, remove the standard equipped handles. Save the screws to reuse on replacement handles.

 

Step 3:

If you are using a screw gun, skip to step 5. Position the replacement handle in the desired position and mark the screw holes with a light pencil mark. Be sure the underside of the replacement handle is tight against the lip of the door or drawer.

 

Step 4:

Measure 3/8” from the tip of the drill bit and place a piece of tape to mark the depth. Do not drill any deeper or you may risk breaching the face of the door or drawer.

 

Step 5:

Using a screw gun or Phillip’s screwdriver, attach the replacement handle with the screws removed from the original handle.

 

Step 6:

Puddy old screw holes on doors as desired. Complete.

 

11333 County Road 2, Middlebury, IN 46540
Phone: 574-825-8000, Fax: 574-825-9700
granddesignrv.com

 


2 Affected Products

Vehicle

MAKE MODEL YEAR
GRAND DESIGN IMAGINE 2020-2021

 


10 Associated Documents

Defect Notice 573 Report

RCLRPT-22V039-7440.PDF 215.737KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.68 KB]

 


Recall 573 Report – February 2, 2022

RCLRPT-22V039-8513.PDF 215.792KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.73 KB]

 


Recall Acknowledgement

RCAK-22V039-2239.pdf 652.542KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [637.25 KB]

 


Recall 573 Report – 2/2/2022

RCLRPT-22V039-4349.PDF 215.793KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.74 KB]

 


Remedy Instructions and TSB

RCRIT-22V039-4008.pdf 218.392KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [213.27 KB]

 


Recall Quarterly Report #1, 2022-1

RCLQRT-22V039-6906.PDF 211.137KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.19 KB]

 


Recall Quarterly Report #2, 2022-2

RCLQRT-22V039-4608.PDF 211.245KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.29 KB]

 


Recall Quarterly Report #3, 2022-3

RCLQRT-22V039-6235.PDF 211.331KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.38 KB]

 


Recall Quarterly Report #4, 2022-4

RCLQRT-22V039-4479.PDF 211.445KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.49 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-22V039-0495.pdf 165.882KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [161.99 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V039&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
Ravinte 30 Pack | 5 Inch Cabinet Pulls Matte Black Stainless Steel Kitchen Drawer Pulls Cabinet Handles 5 InchLength, 3 Inch Hole Center
  • Risk-free 365 Days trail:We're confident you 'll love your Ravinte handles,So we give you 365 days to try it on us or pick it up and give you a full refund.
  • MODERN: Functional & elegant, These Matte Black pulls suitable for different styles of cabinets, wardrobe, chest and cupboard.
  • Enduring & STRONG: 30 bar pulls made of stainless steel finished with classic matte black coordinates well with other appliances and accessoriess.
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
  • [MEASUREMENT]: Hole centers(CC):3 inch(76mm), Total Length:5 inch(127mm), Diameter:1/2 inch(12mm) Projection:1-1/4 inch(32mm)
SaleBestseller No. 2
Ravinte 30 Pack 5'' Cabinet Pulls Brushed Nickel Stainless Steel Kitchen Drawer Pulls Cabinet Handles 3" Hole Center
  • Risk-free 365 Days trail:We're confident you 'll love your Ravinte handles,So we give you 365 days to try it on us or pick it up and give you a full refund.
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 3 inches. Installing new cabinet handles, drill two holes with center to center spacing of 3 inches.
  • ENDURING & STRONG: 30 bar pulls made of stainless steel finished with classic satin nickel coordinates well with other nickel appliances and accessoriess.
  • Simple look: The Brushed Nickel cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Satin Nickel handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
  • [MEASUREMENT]: 3 inch(76mm), Total Length:5 inch(127mm), Diameter:1/2 inch(12mm) Projection:1-1/4 inch(32mm)
SaleBestseller No. 3
homdiy 15 Pack Brushed Nickel Cabinet Pulls 3 Inch Handles Stainless Steel Cabinet Hardware for Kitchen and Bathroom Cabinets, 5 Inch Overall Drawer Pull
  • Measurements: 3 inch Center to Center with 5 in Overall Length..Please measure your cabinet HOLE CENTERS is 3in before you purchase cabinet handles.
  • Material: homdiy cabinet pulls made of high quality Stainless Steel with brushed nickel finished,hollow construction but durable and hard to get rusty
  • Simple But Classic: This brushed nickel cabinet pulls are simple but depending on your application, can be very key in bringing the design together. The arc of this nickel handle is round and it has no corners, which can effectively prevent your child from bumping and injured.
  • SCREWS: Free screws of 1in(25mm)& 1.57in(40mm) included are suitable for board thickness of cabinets.If you need other length screws, please feel free to contact us !
  • PERFECT SERVICE: Best quality and service is our goal, If you are not satisfied with this brushed nickel drawer pulls, please contact us. We promise to leave you without any worries, please buy with confidence.
SaleBestseller No. 4
Ravinte 30 Pack 5 Inch Kitchen Square Cabinet Handles Matte Black Pulls Drawer Hardware for Cabinets Cupboard
  • Risk-free 365 Days trail:We're confident you 'll love your Ravinte handles,So we give you 365 days to try it on us or pick it up and give you a full refund.
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 5 inches. Installing new cabinet handles, drill two holes with center to center spacing of 5 inches.
  • Size of cabinet hardware: Overall Length: 5-1/2 inch; Width: 1/2 inch;Thickness:1/2 inch;Projection: 1-2/5 inch; Screw-hole center: 5 inch.
  • Durable design& fine touch: With advanced technique, the drawer pulls is made to be long lasting, accompanied with good looking and fine touch.
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
Bestseller No. 5
JOY DECOR 30 Pack 5 Inch Cabinet Pulls Kitchen Cabinet Handles with 3 Inch Hole Center Matte Black Cabinet Hardware Stainless Steel Kitchen Drawer Pulls for Cabinets Cupboard, 76mm Hole Centers
  • Exact Fit Dimensions: Hole centers at 3 inches (76mm), total length of 5 inches (127mm), diameter of 1/2 inch (12mm), and projection of 1-1/4 inch (32mm)
  • Durability You Can Trust: Our handles are crafted for long-lasting use, maintaining both look and functionality.
  • Contemporary Elegance: The black T-shaped design adds a modern touch to any cabinet, enhancing your space's aesthetic.
  • Installation Made Simple: Accompanied by two sizes of screws, these handles are designed for easy installation across different cabinet depths.
  • 365 Days of Risk-Free Satisfaction: Reach out to us for any quality concerns or installation support. With a 378-day trial, you can return the handles with ease if they don't meet your expectations.
Bestseller No. 6
Ravinte 30 Pack Solid 3 Inch Center to Center Slim Square Bar Drawer Handles Kitchen Cabinet Handles Black Drawer Pulls Kitchen Cabinet Hardware Kitchen Handles Matte Black Cabinet Pulls
  • Size of cabinet hardware:Screw-hole center: 3 inch(76mm). Overall Length:3-5/16 inch(85mm); Width: 11/32 inch(9mm);Projection: 1-3/32 inch(28mm);
  • Risk-free 365 Days trial: We're so confident you'll love this cabinet pulls that we're offering you a 365-day trial to try it, if it does not perform to your satisfaction, return it for replacement or full refund.
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 3 inches(76mm). Installing new cabinet handles, drill two holes with center to center spacing of 3 inches(76mm).
  • DURABLE & STRONG: The solid and sturdy 30 bar pulls made of Zinc finished with classic matte black coordinates well with other appliances and accessories.
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
SaleBestseller No. 7
Ravinte 30 Pack Solid 5 Inch Kitchen Square Cabinet Handles Matte Black Cabinet Pulls Drawer Pulls Kitchen Cabinet Hardware Flat Black Kitchen Handles
  • Risk-free 365 Days trial: We're so confident you'll love this cabinet pulls that we're offering you a 365-day trial to try it, if it does not perform to your satisfaction, return it for replacement or full refund.
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 5 inches(128mm). Installing new cabinet handles, drill two holes with center to center spacing of 5 inches(128mm).
  • DURABLE & STRONG: The solid and sturdy 30 bar pulls made of Zinc finished with classic matte black coordinates well with other appliances and accessories.
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
  • Size of cabinet hardware: Screw-hole center: 5 inch; Overall Length: 5-3/8 inch; Width: 15/32 inch;Thickness:3/10 inch;Projection: 1 inch.
Bestseller No. 8
Ravinte 30 Pack 1-1/4 inch Kitchen Cabinet Knobs Drawer Dresser Knobs Matte Black Zinc, Drawer Pulls Door Handles Knobs
  • Risk-free 365 Days trial: We're so confident you'll love this cabinet knobs that we're offering you a 365-day trial to try it, if it does not perform to your satisfaction, return it for replacement or full refund.
  • EURO-STYLE: The cabinets knobs is an ideal way to beautify an entire room. Make cabinet hardware a part of your home décor today
  • Size of round Knobs:Diameter 1-1/4“ ; Base Diameter: 3/4" ; Height: 7/8"
  • Durable design& fine touch: With advanced technique, the door pulls are made to be long-lasting, accompanied with good looking and fine touch.
  • Simple look: The Black cabinet knobs have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black knobs have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
Bestseller No. 9
Ravinte 30 Pack 6-1/4 Inch Kitchen Square Cabinet Handles Matte Black Stainless Steel Drawer Pulls Hardware
  • Risk-free 365 Days trail:We're confident you 'll love your Ravinte handles,So we give you 365 days to try it on us or pick it up and give you a full refund.
  • If you're replacing your handle, measure and ensure the center to center hole spacing of the current handle is 6-1/4 inches(160mm). Installing new cabinet handles, drill two holes with center to center spacing of 6-1/4 inches(160mm).
  • Size of cabinet hardware: Overall Length: 6-3/4 inch(172mm); Width: 1/2 inch;Thickness:1/2 inch;Projection: 1-2/5 inch; Screw-hole center: 6-1/4 inch(160mm).
  • Durable design& fine touch: With advanced technique, the drawer pulls is made to be long lasting, accompanied with good looking and fine touch.
  • Simple look: The Black cabinet handles have a wide appeal across a range of kitchen cabinet doors and drawers. The Matte Black handles have a clean and timeless look that works with farmhouse, vintage, traditional and transitional styles.
SaleBestseller No. 10
JOY DECOR 30 Pack Cabinet Knobs, Black Cabinet Handles, 2in Kitchen Cabient Knobs, Single Hole Drawer Knobs for Dresser Drawers
  • Durable Material: These cabinet knobs are crafted with stainless steel and finished with a matte black coating, ensuring durability for daily use. Drawer pulls and knobs are perfect for frequency using areas like kitchens and bathrooms, with exceptional strength and long-lasting performance.
  • Round Edge Design: Upgrade your kitchen with our round drawer knobs. Smooth, rounded knobs for cabinets and drawers add elegance to home renovation.
  • Easy Installation: Our black knobs offer two sizes (1" and 1-3/4") of M8-32 metric size machine screws. They fit most cabinets and are easy to install.
  • 365 Days of Risk-Free Satisfaction: We offer 365 days risk-free after-sales service so that you can order with confidence. JOY DECOR brings you a truly joyful decoration experience.
  • Measurements: Overall Length: 2 inch (50mm), Width: 1/2 in (12mm), Height: 1-2/5 inch (35mm). Cabinet knobs with single hole are easily installed by inserting a single screw.

Last update on 2024-04-18 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...