| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10199927
Manufacturer Communication Number: CSA-001
Summary
Customer Service Advisory for Ford Recall (21S17) regarding Low Oil Volume Rear Axle
4 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FORD | F-53 | 2020-2021 |
| TIFFIN | ALLEGRO | 2021-2022 |
May 25, 2021
Ford F-53 Chassis Inadequate Rear Axle Oil Fill Volume
Dear Tiffin Motorhome Customer,
Please see the enclosed letter from Ford Motor Company about a safety recall Ford released that is applicable for the VIN listed above. For any questions regarding this safety recall, please contact Ford Motor Company’s Motorhome Customer Assistance Center at 1-866-906-9811. Representatives are available 24 hours a day.
Thank you for your attention to this matter,
Tiffin Motorhomes Recall Department
1 Associated Document
Manufacturer Communications
Ford Recall # 21S17
May 25, 2021
Ford F-53 Chassis Inadequate Rear Axle Oil Fill Volume
https://www.nhtsa.gov/recalls?nhtsaId=10199927
MC-10199927-0001.pdf 119.484KB
Loading...
Reload document 
Open in new tab
- Protects Against Severe Temperatures To Help Extend Service Life
- Formulated With Extreme-Pressure Additives To Minimize Gear Wear From Shock Loads
- Helps Protect Against Gear Wear From Scuffing, Scouring, Corrosion And Pitting
- Recommended For Conventional Hypoid Differentials And Non-Synchronized Manual Transmissions In Passenger Cars, Light Trucks, Sport Utility Vehicles, Vans And Heavy-Duty Trucks Where An Api-Gl5 Or Gl-4 Fluid Is Specified
- Contains extraordinary anti-wear and lubricity agents, ensuring exceptional protection against wear and reducing drag
- Helps to control heat
- Incorporates Lucas cutting-edge additive technology derived from top-rated Lucas Heavy Duty Oil Stabilizer, the number one supplemental oil in the heavy-duty industry
- Available in 1 quart and 1 gallon bottle sizes
- WIDEST SPEC RANGE ON THE MARKET: widely compatible with a very large number of hypoid gear systems, differentials, transmissions and axle assemblies.
- SEVERE SERVICE MAX: Exceptional shear stability and oxidation resistance. Polyphosphate EP proprietary additive system offers substantial improvement in performance over previous generation, low cost, gear oils
- BUILT IN LIMTED SLIP ADDITIVE - Does not require "additional" LS additive. Its built into the product, optimized for all limited slip differentials, including those with built in wet brakes.
- OUTSTANDING SCUFFING PROTECTION - Superb gear and syncron protection, facilitating extremely long transmission life. Exceeds Load Stage 13 extreme pressure requirements beyond 120,000 lbs / sqi.
- SHEAR STABLE - Excellent thermal stability and high load capacity without viscosity breakdown, facilitates excellent film strength under high loads, high temp and high shear conditions.
- ✅ Extended gear and bearing life due minimal deposits.
- ✅ Exceptional thermal stability and resistance to high temperature oxidation.
- ✅ Longer seal life.
- ✅ Reduced maintenance cost and longer equipment life.
- ✅ Effective low temperature lubrication.
- Meets warranty requirements and is recommended for conventional and limited-slip differentials of passenger cars, light trucks, vans and buses
- Formulated for automotive use
- Use according to owner guide recommendations
- Recommended by Ford Motor Company
- Motorcraft SAE 80W-90 Premium Rear Axle Lubricant is an excellent multi-purpose extreme pressure lubricant
- Product Type :Auto Accessory
- Package Dimensions :8.89 Cm L X10.922 Cm W X30.48 Cm H
- Country Of Origin :United States
- Package Weight :2.0Lbs
- Formulated specifically for use in motorcycles and ATVs
- Superior protection from wear, pitting and spalling
- Shear stable formula maintains viscosity and ensures smooth shifting
- Surface-active chemistry keeps surfaces free of corrosion, deposits and wear
- Exceeds API GL-5 specifications
- Direct replacement for Mercury Marine 858058K01
- Provides maximum protection against excessive wear, corrosion and pitting for extended gear life in marine applications
- Contains additives to protect gears if water enters the gear case or lower unit
- Recommended for use in outboard motor gear cases and marine lower units in applications below 75hp
- 80W-90 viscosity
Last update on 2024-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.