“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10194474
Manufacturer Communication Number: Bulletin 2019-8
Summary
Handlebar may have a play in rotation due to unequal clamping surface
Brake oil reservoir diaphragm may be incorrectly installed
PROBLEM
1- Handlebar may have a play in rotation due to unequal clamping surface.
2- Brake oil reservoir diaphragm may be incorrectly installed.
SOLUTION
At PDI
1- Install a flat washer on handlebar stem screw.
2- Make sure brake oil reservoir diaphragm is correctly installed.
– If correctly installed, no further action is required.
– If not correctly installed, place the diaphragm in correct position.
Registered Vehicles
1- Install a flat washer with a new handlebar stem screw.
2- Replace brake oil reservoir diaphragm with a new one.
PARTS REQUIRED
Order parts through regular channel.
At PDI
DESCRIPTION | PART NUMBER | QTY |
Flat washer | 503192494 | 1 |
Registered Vehicles
DESCRIPTION | PART NUMBER | QTY |
Flat washer | 503192494 | 1 |
M8 X 100
Hexagonal screw |
230080044 |
1 |
Diaphragm | 705601610 | 1 |
CORRECTIVE ACTION
1- Handlebar Stem Screw
At PDI
Install the flat washer with the handlebar stem screw when installing the handlebar. Refer to PDI bulletin.
Registered Vehicles
1. Lock the steering column. Refer to LOCKING THE STEERING COLUMN in the appropriate shop manual.
2. Move handlebar forwards.
3. Remove the rubber plug.
4. Remove and discard the handlebar stem screw.
5. Install the new screw with the flat washer.
6. Apply threadlocker on the threads.
NOTE: Threadlocker is considered as shop supply and is not claimable.
SERVICE PRODUCT
LOCTITE 243 (BLUE) (P/N 293 800 060)
7. Center the handlebar (rotation movement).
NOTE: Make sure the handlebar is clamped when centering it.
8. Tighten the screw to specification
TIGHTENING TORQUE
Handlebar stem screw
26.5N•m ± 1.5 N•m
(19.5 lbf•ft ± 1.1 lbf•ft)
9. Reinstall the rubber plug.
10. Position handlebar and lock it in place.
WARNING
Be sure that the locking lever is well positioned.
It should be equal with the handlebar retaining clamps.
11. Unlock the steering column.
2- Brake Oil Reservoir Diaphragm
1. Remove the RH rocker panel. Refer to BODY subsection.
2. Slide the RH footpeg fully rearward.
3. Clean the reservoir cap and the top of the reservoir.
4. Remove the reservoir cap and the friction washer.
NOTICE Brake fluid can damage painted surfaces or plastic parts. Wipe up any spills.
At PDI
If the diaphragm is correctly aligned with the center wall no further action is required.
If the diaphragm is incorrectly aligned with the center wall:
5. Place the diaphragm in correct position and reinstall removed parts.
Registered Vehicles
6. Remove and discard the diaphragm.
7. Correctly install a new diaphragm.
8. Reinstall removed parts.
SEOCONTENT-START
WARRANTY
BULLETIN
WARRANTY CAMPAIGN
CAUTION: All involved customers must be notified, all involved units must be corrected as per instruction herein.
Can-Am® On-Road RykerTM
Campaign no.: 2019–0012
2019–0013
June 5, 2019 Subject:1 – Unequal Clamping Surface on Handlebar
Stem
2- Brake Oil Reservoir Diaphragm incorrect
position
No. 2019-8
MODEL YEAR MODEL ADMISSIBLE UNITS
2019 Ryker® Go to BOSSWeb/Warranty/Campaign Monitoring to know the
quantity of units in your inventory impacted by this campaign
IMPORTANT
– When a vehicle comes in for service, always type the VIN in Knowledge Center to
check for pending campaigns or alerts.
– When performing any work on a vehicle, it is good practice to connect it to BUDS2
to ensure that all needed updates are done.
WARRANTY
Submit a warranty claim using the following information.
For claiming procedure, refer to the DEALER/DISTRIBUTOR
WARRANTY GUIDE.
At PDI
Product Line Ryker
Unit Model Year 2019
Campaign/Bulletin/
Description
12 / 2019-8 / Unequal
Clamp Surface PDI
Total Labor time paid 0.3 hour
Expiration date July 31, 2022
Registered Vehicles
Product Line Ryker
Unit Model Year 2019
Campaign/Bulletin/
Description
13 / 2019-8 / Unequal
Clamp Surface
Registered
Total Labor time paid 0.3 hour
Expiration date July 31, 2022
4
SEOCONTENT-END
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
CAN-AM | RYKER | 2019 |
1 Associated Document
Manufacturer Communications
2019-8
June 5, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10194474
MC-10194474-0001.pdf 669.273KB
“This site contains affiliate links for which OEMDTC may be compensated” |
- Protects threads
- Medium strength
- Locks threads
- Prevents rusting of threads
- Can be removed with hand tools
- { No Unwanted Leakage } Unlike other broken twist mechanisms and flimsy plastic tips, invest in a reliable & secure nozzle to keep surfaces safe from accidental glue leakage
- {Get some stability in your life } GH1200 red and blue lock tight provides a strong and consistent lock that keeps everything firmly in place and ensures stable performance against leakage, corrosion and loosening
- { Never run out of blue locktight again } 2 pack value offer of 6g threadlocker power grip is enough to provide a good long time and you will never have to worry about running out soon
- { Secure Projects for Long haul } Screw Glue provides a strong and consistent lock that keeps everything firmly in place. No more worrying about tangled threads and unstable nuts or bolts
- { Wide application } Whether you're installing a valve cover, water pump, or just tightening down some furniture screws, threadlocker has you covered. Our adhesive solution can be used on a variety of automotive, industrial and furniture applications
- Lock and Seal Fasteners: Prevents loosening of metal fasteners caused by vibration on engines, machinery, and vehicles
- Prevents Rust and Corrosion: Moisture-resistant formula protects from leaks, rusting, and corrosion and eliminates need to stock up on expensive lock nuts and washers
- Permanent Fix: Permanent seal prevents tampering and is only removable once cured by heating parts up to 500°F (260°C)
- Easy and Quick: Sets in 10 minutes and fully cures in 24 hours
- For Large Fasteners: Heavy duty, high-strength formula for use on threads for nuts and bolts up to 1 inch (25mm)
- For All Household Iterms with Screws, Fasten Bolts & Nuts for a Long Time to Avoid Loosening Due to Vibration, And prevent the bolts from rusting. Family must-have to Etend the Life of Items and Safe Using!
- Specially Designed for Families: Optimize the Product Formula, It Provides Medium-strength Curing Fastness and Viscosity to Ensure the Normal Use of Items, And Provides Medium-strength Torque that Allows You to Manually Remove Bolts & Nuts with Tools.
- Widely Uses: Suitable for bolts below M20, Such as Cars and Auto Electronics, Household Appliances, Kitchen and Bathroom Appliances, Personal Electronics, etc.
- Simple Use: Just Apply a Dab of this Product Along the Screw to the Fixing Position of the Bolt & Nut, And then the Product will Start to Cure in 10 Minutes, And Your Items can be Used Normally after Fully Cured in 24 hours.
- Brand Guarantee: Same formula, Same using experience. American brand, Chinese OEM. Please believe in the power of ESKONKE brand, We strive to provide the best quality products and the best customer experience.
- Rubber Toughened: Loctite’s most durable cyanoacrylate super glue formula resists water, impact, shock, vibration for materials subject to daily use and harsh conditions
- No Drip Or Run: No-mess formula is ideal for vertical applications and does not drip or run
- Maximum Control: Features a patented easy side-squeeze bottle design for maximum control and pinpoint accuracy and application
- Versatile: Works well on a variety of porous and non-porous surfaces including leather, china, wood, rubber, metal, paper, ceramic, hard plastics and more
- Invisible Repairs: Super glue gel formula sets without clamping and dries transparent for office, home, hobby, and crafting projects
- Loctite Threadlocker 242, 50mL Bottle, Blue
- RELIABLE ADHESION. Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces) & tolerates minor contamination by oils (e.g. motor oils, corrosion protection oils, cutting fluids). Will not loosen under stress.
- RESISTANT. Won't drip, leak or melt. Even in high temperatures, LOCTITE 248 self-feeding glue sticks keep their integrity making them perfect for difficult overhead applications.
- REMOVABLE WITH HAND TOOLS. Well suited for automotive and other applications where maintenance or servicing is required such as valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker studs, carburetor studs, caliper brackets, cylinder heads and more.
- CONVENIENT CURING. Sets in just 10 minutes & is fully cured in 24 hours. Great for volume assembly as it can be applied well before assembly.
- APPLICATIONS. For use on threads for 6mm to 19mm (1/4 in. to 3/4 in.) nuts and bolts.
- Sold as 1 Each.
- Delivers a super strong final bond.
- Control applicator provides additional accuracy.
- Locking cap prevents gel from leaking and drying out.
- Dries clear.
Last update on 2024-03-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.