| “This site contains affiliate links for which OEMDTC may be compensated” |
September 14, 2021 NHTSA CAMPAIGN NUMBER: 21V710000
Incorrect Internal Locking Mechanism
A trailer that detaches from a vehicle increases the risk of a crash.
NHTSA Campaign Number: 21V710
Manufacturer Kaufman Trailers of NC, Inc.
Components TRAILER HITCHES
Potential Number of Units Affected 252
Summary
Kaufman Trailers of NC, Inc. (Kaufman Trailers) is recalling certain 2021 Equipment trailers. These trailers have an incorrect internal locking mechanism, and when coupled with a 2-5/16″ ball hitch may result in excessive play and trailer detachment.
Remedy
The customer will inspect their Kaufman Trailer and a replacement will be mailed, as necessary, free of charge. Owner notification letters were mailed October 23, 2021. Owners may contact Kaufman Trailer’s customer service at 1-336-790-6800.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| KAUFMAN | EQUIPMENT TRAILER | 2021 |
5 Associated Documents
Recall 573 Report – Amendment 1
RCLRPT-21V710-2291.PDF 214.411KB
Loading...
Reload document 
Open in new tab
Defect Notice 573 Report
RCLRPT-21V710-5643.PDF 212.453KB
Loading...
Recall Acknowledgement
Loading...
Recall Quarterly Report #2, 2022-1
RCLQRT-21V710-6885.PDF 211.238KB
Loading...
Recall Quarterly Report #1, 2021-4
RCLQRT-21V710-1118.PDF 211.238KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V710&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
Bestseller No. 1
Towever 83803 Towever Trailer Hitch Receiver, RV bumper Hitch Receiver 2 Inch for 4 x 4 Inches Square RV bumper Rack Trailer Towing Purpose
- The RV Camper bumper hitch adapter 2 in receiver are designed to fits travel trailer 4” x 4” bumper beams.
- Differ from towever 83801: Offer lower hitch point to provide level trailer towing, more capacity for pulling than holding bike rack, cargo carrier, pls check the bumper capacity firstly. Some bumpers need be reinforced.
- The RV accessories Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight.
- 2 bolts included for Mounting hardware, and the bumper hitch can be mounted both downside and upside.
- Heavy duty constructed and black powder coated for corrosion resistance.ATV hitch adapter is hitch extender 2 inch, good rv camper accessories for travel trailers.
Bestseller No. 2
CURT 13703 Camper Adjustable Trailer Hitch RV Towing, 2-Inch Receiver, 3,500 lbs., Fits Frames up to 72 Inches Wide
- DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer
- EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 72 inches wide
- FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
- RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage
Bestseller No. 3
Ohuhu Bolt-on RV Bumper Hitch Receiver Adapter Fits 4-4.5" Beam, 2" Receiver 200Lbs Tongue Weight Capacity, Travel Trailer Rear Bumper with Hitch Pin & Hitch Cover, Fit for Camper Bike Racks Cargo Car
- Use Only For 2"*2" Square Tubes: Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation. (Please check the bumper size carefully before purchasing.)
- 200lbs Tongue Weight Capacity: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on. (Note: It is NOT intended for towing purposes.)
- Quick, Easy Installation: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you are good to go. (It can be Mounted Upside Down.)
- Sturdy & Durable: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
- Accessories Included: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
Bestseller No. 4
KUAFU Adjustable Trailer Hitch RV Trailers 5th Wheel 2 Inch Towing Hitch Receiver Powder Coated Steel Black
- Fitment: This trailer hitch is great for tow fishing boat trailers, popup campers, trailers and bikes. Widely used in daily life.
- Function: 2" hitch for travel trailers and fifth wheels. It is mounted on the rear of the trailer and is used to tow the vehicle when facing trouble. Class I hitch bolted onto frame, Max tongue weight : 200 pounds. Class II hitch welded to frame, tongue weight: 300-350 pounds.
- Feature: Material: Steel; Color: Black; Finish:Powder Coated. Durable, strong strength and impact resistance meet your towing needs.
- Package Include: 1pc of trailer hitch. Mounting hardware and instruction are included.
- Installation: Install by screws. Professional installation is always highly recommended.
Bestseller No. 5
Ohuhu RV Bumper Hitch 2" Receiver Adapter with Hitch Pin & Hitch Cover, Openning 3500 LBS Capacity Fits 4" x 4" Bumper Trailer Towing Cargo Carrier Bike Racks
- Quick, Easy Installation: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you are good to go.
- Sturdy & Durable: Pulls its weight, every time! Tough and durable for the long haul, this hitch receiver is constructed of premium steel. With a dual coating finish of E-coat and Black Powder Coating, this bumper hitch is protected from rust and corrosion. Get the job done right with the Ohuhu Trailer Receiver!
- Use Only For 2"*2" Square Tubes: Designed specifically for 4"*4" bumpers, this receiver is made for use with 2"*2" square tubes. It can allow for a wide variety of towing options.
- 350lbs Tongue Weight Capacity: This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component).
- Accessories Included: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
Bestseller No. 6
CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs
- DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
- FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
- RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
- EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools
SaleBestseller No. 7
Towever 83801 Towever RV Bumper Hitch Receiver 2 inches Adapter for 4-4.5 inches Travel Trailer Rear Bumper
- This travel trailer RV accessories fits 4"- 4.5" square bumpers (can be mounted upside or down bumper beams )
- For hitch bumper mount of bike racks, RV tire carriers, cargo carriers or other accessories, The bumper receiver allows 200 Ib tongue weight capacity
- The accessories NOT Intended for RV level trailer towing purposes, PLS BE CAREFUL
- The adapter are solid steel construct, weigh 9 lbs and protected by a durable black powder coat finish
- The bumper adapter takes 4 bolts and secures tightly around the travel trailer bumper
Bestseller No. 8
Stromberg Carlson CC-300 Product Accessory Hitch Adjustable, Black
- 2" hitch for travel trailers and fifth wheels
- Bolt (Class I) or weld (Class II) onto the frame
- For use with bike racks, cargo carriers and other accessories
- Not to be used pulling cars or boats if bolted in Class I configuration
- Mounts to the side wall of frame or horizontal wall of C-channel or I-beam with angled hardware
Bestseller No. 9
HITOWMFG 2 inch RV Bumper Mount Hitch Receiver for 4x4 inch Square RV Bumper, 3500 LBS, Fit for Cargo Carrier Bike Racks
- 【 STANDARD FIT 】 Fits standard 4" x 4" RV or travel trailer bumper/beam, use for both downside and upside, the bolts Need to be secure tightly around the travel
- 【 2 INCH RECEIVER FIT 】Accept hitch mount with 2" shank such as bike racks, RV tire carriers, cargo carriers or other accessories
- 【 CAPACITY 】 3500lbs. Gross trailer weight, 350lbs. Max tongue weight, Do NOT use for RV level Trailer towing Purpose
- 【 WEATHER RESISTANT 】Finished in black power coating provide durable and strong conditions, resist dust and corrosion, adds extra durability, can be used with an anti-rattle kit
- 【 POWERFUL& DURABLE BUILD 】 Heavy duty steel via robotically welded for superior strength provide excellent mounting facility, high quality hardware fittings, all make this adjustable trailer hitch more durable
Bestseller No. 10
GESEXI Rv Bumper Hitch Receiver 2’’ for Mounting Bike Racks & Cargo Travel.…
- 【 Size and Model 】 The bolt on receiver hitch is suitable for 2x2 square pipes, with a maximum connection size of 4.5 '' high x 4.25 '' deep.
- 【 High quality material selection 】 The rv bumper hitch receiver 2 inch uses carbon steel as the main raw material, which is corrosion-resistant, scratch resistant, and trustworthy.
- 【 Widely used 】 Bolt fixed design, easy installation and disassembly, trailer hitch receiver can meet different usage scenarios.
- 【Installation device】 It is not used for traction and is suitable for fixing Bicycle frame, cargo rack and tire rack. The hitch receiver tube belongs to trailer accessories.
- 【 Carrying 200 pounds 】 Extremely strong load-bearing capacity, as long as there is an hitch receiver, you can install any bracket on your bumper.
Last update on 2024-06-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.