| “This site contains affiliate links for which OEMDTC may be compensated” |
August 27, 2021 NHTSA CAMPAIGN NUMBER: 21V669000
Rear LED Lights Too Bright/FMVSS 108
The excessive brightness may affect the vision of other drivers, increasing the risk of a crash.
NHTSA Campaign Number: 21V669
Manufacturer Boise Mobile Equipment
Components EXTERIOR LIGHTING
Potential Number of Units Affected 1
Summary
Boise Mobile Equipment is recalling one 2016 International 4400 type 3 fire truck equipped with Ecco Code 3 7×9 Stop-Tail-Turn Reverse All-in-One LED lights. The lights may be too bright, exceeding the maximum light output allowed which may adversely affect the vision of drivers. As such, these lights fail to comply with the requirements of the Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Boise Mobile Equipment will assist the owner in obtaining filter kits from the light manufacturer, free of charge. Owner notification letter was mailed September 3, 2021. Owners may contact Boise Mobile Equipment’s customer service at 1-208-338-1444. Boise Mobile Equipment’s number for this recall is 52606.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
IMPORTANT SAFETY RECALL
NHTSA ID: 21V669
Dear Boise Mobile Customer,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Boise Mobile Equipment has been notified of a noncompliance issue involving the Code 3 79STTRBZ combination stop, tail, turn, reverse lamp used in the construction of your vehicle.
What is the Problem?
The subject lamps exceed the maximum permissible candela levels specified in Federal Motor Vehicle Safety Standard (FMVSS) No. 108 at certain test points.
The increased photometric intensity does not comply with the requirements of FMVSS 108 and may adversely affect the vision of following drivers, increasing the risk of a vehicle crash without warning.
What is the remedy?
The remedy involves installation a filter kit that will ensure that the lamps perform within the permissible photometric intensity ranges.
What should you do?
You can reach out to Code 3 / Ecco Group directly at 1-314-426-2700 to request two filter kits (Part number CZ0199) free of charge. Installation of the filter kit will ensure that the lamps perform within the permissible photometric intensity ranges. You may also contact the Boise Mobile service and warranty department at 1-208-858-8058 for assistance in obtaining the above-mentioned filter kits.
Who should you contact if you have further questions or concerns?
If you have any questions or concerns about this recall, please contact the Boise Mobile Equipment service and warranty department at 1-208-858-8058.
We apologize for any inconvenience but are sincerely concerned about your safety. Thank you.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| BOISE MOBILE EQUIPMENT | TYPE 3 FIRE TRUCK | 2016 |
6 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-21V669-6087.PDF 212.984KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-21V669-8027.pdf 646.182KB
Loading...
Recall 573 Report- Amendment 1
RCLRPT-21V669-5565.PDF 212.983KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-21V669-6217.pdf 175.362KB
Loading...
Recall 573 Report- 04/25/2022
RCLRPT-21V669-8390.PDF 213.013KB
Loading...
Recall Quarterly Report #1, 2021-3
RCLQRT-21V669-5410.PDF 211.136KB
Loading...
Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V669&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
- LIGHTS DIM OVER TIME, REPLACE IN PAIRS: Your lights are a pair, one is never turned on without the other. If one bulb burns out, the other isn't far behind.
- EASY TO REPLACE: Sylvania Long Life miniature bulbs are easy to install and show instant results.
- LOW MAINTENANCE AND HIGH DURABILITY: Designed for durability, greater safety, and lower maintenance by the leading supplier of automotive lighting.
- LONGER LIFE THAN MOST STANDARD BULBS: Long Life bulbs perform twice as long as any other standard miniature bulbs.
- THE SYLVANIA STANDARD OF QUALITY: With 100+ years in business, Sylvania is the world leader in automotive lighting for Original Equipment Manufacturers (OEMs) and the aftermarket.
- What you receive: package comes with 10 pieces 3157 miniature bulbs, enough quantity to meet your multi usages, you can share them with your friends or as backup
- Durable to use: our miniature light bulb is made of quality material, can be applied for longer time than most standard bulbs, which can serve you for long time
- Nice design: the filament and gas mixture of the long time bulb have been engineered for withstanding road vibration and provide longer life than traditional bulbs
- Low Maintenance: our mini light bulbs are designed for durability, requires low maintenance, so you needn't to spend much time and effort on repairing these 3157 light bulbs
- Warm Note: the 3157 light bulb can only be applied for specific models, please make sure whether your models fit before purchase
- Twice The Life Of Standard Incandescent Bulbs
- Philips Offers A Wide Range Of Smart Light Bulbs, Lamps, Fixtures And Accessories
- Original Equipment Quality Seal For The Most Reliable Performance
- Always Replace In Pairs To Ensure A Symmetric Light Beam From Both Bulbs On The Road. Bulbs Dim Over Time
- (Set of 2 W2.5x16q D.F. wedge base 3156/3157 red LED bulbs) LED Chips: Each 3156/3157 LED red bulb is equipped with 39 pieces high quality, high power with high performance led chips per 3156 3157 LED bulb, 360° full angle illumination with projector lens design
- Important: Extra LED resistors maybe required to avoid the signal hyper flash or error code for LED bulbs draw less current than stock lamps. Compatible with both standard and CK / SRCK type. Voltage: 12V~14.8V, Built in stable current IC driver for longer lifespan. Color: Pure red.
- Dual filament LEDs are universal fit for single filament and dual filaments T25 wedge base bulbs. Non-polarity. Cross reference number: 3156, 3056, 3047, 3047LL, 3047K, 3055, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157 ,3157K, 3157X, 3157LL, 3157ST, 3157KX, 3357, 3357LL, 3357K, 3457, 3457K, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, p27/7w, 3157/40610, 3157/17172, 12450004, 78633, 17945, 3156/21863, 9442003, 78625, 17941, etc.
- Application: Used for upgrading OEM dim incandescent or damaged rear turn signals, directional blinker lamps, brake stop tail lights, taillights, rear side marker light amp for much safer driving and luxury looking for automotive cars, trucks, motorcycles, SUVs, vans.
- Newly upgraded smart IC driver for better performance and longer lifespan. USA located.
- See Sylvania’s Application Guide in the Technical Details below to confirm compatibility
- Longer life than basic bulbs
- Legal for on road use
- OE (Original Equipment) Manufacturer
- Light bulbs dim over time and require replacement
- Non-polarity. Can be used for brake lights, tail lights, stop lights, parking light, daytime running light, etc. Some sensitive vehicles will meet canbus issue after installing, load resistors or flasher relay will be required to solve these issues, you can contact us through Amazon Buyer Message to get help and solutions
- Low power and high brightness. 5.5W per 7443 led red bulb. Only 1/4 energy consumption of original 7443 red bulb but 4 times brighter. Built in smart IC driver ensure constant current, no radio interference. Plus instant-on capability with zero warm-up time
- Unique imitated halogen shape design. Resembling halogen bulb shape design and sequencing 54 pieces 4014-SMD LED chips precisely around the light. Delivering 360° high luminous efficiency with full amber light, easier to be noticed and safer to drive
- Small size comparable to OEM 7440 bulbs Non-polarity, applied to US standard and CK sockets. Fits: 992, 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440NA, 7440NAK, 7444NA,7444NAK, 7443LL.etc. Amazon filter system may not be 100% accurate or up to date, if you are not sure which bulb model fit your vehicle, please check your vehicle owner manual to confirm or ask a question for help
- Electroplating process housing. Improves oxidation resistance and produces less heat. High-end styling, matching great in the assembly. Ideal replacement for your halogen 7440 red bulbs
- (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high brightness chips per bulb, Working Voltage: 9v-30v (fit 12V, 24V vehicles).
- Fits: 3056, 3156NA, 3156K, 3156, 3156A, 3156AK, 3156NAK, 3047, 3047LL, 3047K, 3057A, 3057ALL, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157A, 3157AK, 3157 ,3157K, 3157X, 3157LL, 3157ST, 3157KX, 3157NA, 3157NALL, 3157NAK, 3357A, 3357ALL, 3356, 3357, 3357KNA, 3357LL, 3357K, 3454NA, 3457A, 3457ALL, 3457AK, 3457, 3457K, 3457NA, 3457NAK, 3757A, 3757AK, 3757ALL, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 4157NA, 4157NAK, 5702 ect.
- Application: Back Up Reverse Lights, Brake Lights, Tail Lights, Parking Lights, Side Marker Lights, Daytime Running Lights etc. You will need load resistor or flash relay to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage: Non-polarity design, Compatible for both CK/SRCK and Standard socket. More than 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- 【SUPER BRIGHT】 – Yorkim 3157 LED bulbs are powered by 18 pcs of high quality 5050 chipsets to offer ultra brightness for your vehicle. 360 degree lighting angle, no blind spot, super brighter than the stock yellowish halogen bulb, updates your car interior to a modern look
- 【SPECIFICATIONS】- Head diameter 18mm, Length 47mm, Voltage 12v, 6500K Xenon White. A 50w Load resistor(ASIN:B07KS6KMYG)might be needed to prevent error message when replace for Turn Signal Lights. You may also need a flasher relay to solve the fast blinker issue for some vehicles
- 【FITMENT】 - 3056 3057 3156 3157 4157, commonly used for backup reverse lights, brake lights, tail lights or turn signal lights.
- 【EASY TO INSTALL】 - Non-polarity design, simply plug and play. Not suitable for CK sockets.
- 【NOTE】 - Normally different LED bulbs are required for different parts of the same car (I.e. brake light, tail light, turn signal light, etc.). Although 3157 LED bulbs are most commonly used, they may not fit all parts of your car. Please check owner's manual to verify compatibility before purchase or send us a picture of your original bulb for our assistance on selecting the right product
- twice the life of standard incandescent bulbs
- best value
- original equipment quality seal for the most reliable performance
- always replace in pairs to ensure a symmetric light beam from both bulbs on the road. bulbs dim over time.
- miniature bulbs by philips, for over 100 years we have been continuously innovating automotive lighting
- See Sylvania’s Application Guide in the Technical Details below to confirm compatibility
- Specifically designed to withstand road vibration and provide longer life than traditional bulbs
- Filament and gas mixture have been engineered for improved longevity
- Meets industry regulations for performance, while bettering life expectancy
- Produced by a trusted OEM automotive lighting manufacturer
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.