| “This site contains affiliate links for which OEMDTC may be compensated” |
August 3, 2021 NHTSA CAMPAIGN NUMBER: 21E070000
Parking Brake May Fail To Activate
Unintentional vehicle movement can increase the risk of a crash.
NHTSA Campaign Number: 21E070
Manufacturer Bendix Commercial Vehicle Systems, LLC
Components PARKING BRAKE
Potential Number of Units Affected 431
Summary
Bendix Commercial Vehicle Systems, LLC (Bendix) is recalling certain Intellipark Dash Electronic Control Units (DECU) with part number K183042R000. The DECU may fail to activate the parking brake, causing the vehicle to unintentionally move.
Remedy
Dealers will update the software, or replace the DECU, free of charge. Owner notification letters were mailed September 30, 2021. Owners may contact Bendix customer service at 1-877-345-9526.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Technical Bulletin
Bulletin No: TCH-003-060
Effective Date: 8/3/21
Cancels: N/A
Subject: Bendix® Intellipark® Parking Brake System Recall
Bendix Commercial Vehicle Systems LLC (Bendix) is conducting a voluntary safety recall campaign, Recall No.: 21E070, involving the Bendix® Intellipark® Parking Brake System’s Dash Electronic Control Unit (DECU).
Problem Description:
See Figure 1. Bendix has determined that the DECU of the affected Bendix Intellipark electronic parking brake control systems incorrectly detects an internal fault at speeds up to 3.1 mph (5 kph). The fault disables the Intellipark system, meaning the loss of the primary Intellipark function to park and unpark the vehicle. In this situation, the driver cannot change the parking brake state using the dash-mounted switches. Flashing of the dash-mounted LED indicator signals that the electronic parking brake system is not available. The driver may not be aware that the parking brake is not set. This may lead to unintended vehicle movement, increasing the risk of a crash.
The driver must turn off the ignition and fan down the service brakes to deplete the reservoirs. The low pressure triggered by this action prompts a spring brake application to park the vehicle. The internal system fault will clear when the vehicle ignition is turned off for at least 35 seconds and then back on.
Vehicles Affected:
This recall includes all Intellipark DECUs manufactured before June 15, 2021. This action does not affect Intellipark DECUs manufactured after June 15, 2021.
What You Need To Do:
Immediately stop using and/or selling any of the Intellipark DECUs that fall within the recall parameters. It is a violation of Federal law for a dealer or distributor to sell an Intellipark DECU that is subject to this recall. Unless otherwise given specific instructions by Bendix, contact your OEM to determine if your vehicle falls within these recall parameters.
Identification:
See Figure 2. A defective Intellipark DECU can be identified by the manufacturing date code on the DECU. If the DECU has a date code that is any date before, and inclusive of, June 15, 2021, the DECU falls within the recall parameters. The DECU needs recalibrated.
Figure 2 – Intellipark DECU Label
Interpreting the Date Code:
See Figure 3. A date code is displayed on the Bendix® Intellipark® Dash Electronic Control Unit (DECU) label which is located on the underside of the switch’s Electronic Control Unit (ECU). Locate the label on the DECU to read the date code. The portion of the date code that determines the date of manufacture can be interpreted as follows:
- The first field is the month (A = January, B = February, etc. – excluding the letter I – so that J = September, and so on);
- The next two fields are the day of the month (e.g. 01 = 1st); and
- The next two fields are the year (e.g. 20 = 2020).
Inventory Disposition:
If your inventory contains Intellipark DECUs that fall within Figure 3 – Intellipark DECU Date Code Interpretation the recall date range, please contact Ms. Shelley Lammers by emailing Intelliparkcampaign21@bendix.com or calling 1-604-242-7409 to arrange for the return of any affected inventory currently in stock. As a reminder, you will need to place an offsetting no-cost order to replenish the returned stock.
Submitting A Claim:
Unless otherwise given specific instructions by Bendix, contact your OEM to submit a claim.
Disposition of the Impacted Intellipark DECU Parking Brake Switch:
Unless otherwise given specific instructions by Bendix, please contact your OEM for instructions regarding the disposition of the Intellipark DECU(s).
Replacing Defective Intellipark DECU Parking Brake Switches:
Unless otherwise given specific instructions by Bendix, please contact your OEM for instructions regarding replacement of the Intellipark DECU(s).
September 30, 2021
Name
Title
Business Name
Street
City, ST Zip
SAFETY RECALL NOTICE
NHTSA RECALL ID 21E070
Dear Bendix customer:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
REASON FOR THIS RECALL
Bendix Commercial Vehicle Systems LLC (Bendix) has decided that a defect which relates to motor vehicle safety exists in certain Bendix® Intellipark® electronic Dash Electronic Control Units (DECUs).
IMPACTED PRODUCT
This recall includes all Intellipark DECUs manufactured before June 15, 2021. This action does not affect Intellipark DECUs manufactured after June 15, 2021.
PROBLEM DESCRIPTION
Bendix has determined that the DECU of the affected Bendix Intellipark electronic parking brake control systems incorrectly detects an internal fault at speeds up to 3.1 mph (5 kph). The fault disables the Intellipark system, meaning the loss of the primary Intellipark function to park and unpark the vehicle. In this situation, the driver cannot change the parking brake state using the dash-mounted switches. Flashing of the dash-mounted LED indicator signals that the electronic parking brake system is not available. The driver may not be aware that the park brake is not set. This could lead to unintended vehicle movement increasing the risk of a crash.
The driver must turn off the ignition and fan down the service brakes to deplete the reservoirs. The low pressure triggered by this action prompts a spring brake application to park the vehicle. The internal system fault will clear when the vehicle ignition is turned off for at least 35 seconds and then back on.
WHAT WE WILL DO
Bendix Commercial Vehicle Systems LLC (Bendix) will voluntarily remedy the defect of the impacted Bendix® Intellipark® Parking Brake System’s Dash Electronic Control Unit (DECU) by re-calibrating the Intellipark system’s reaction to the fault. This recalibration will allow the system to return to normal operation – once the internal fault is no longer active – allowing the driver to operate the electronic park brake system as normal.
The recalibration that enables you complete the recall remedy is available as of the date of this notification via your Bendix Account Manager. Please note, some software versions cannot be electronically recalibrated, so a physical replacement of the DECU will be necessary. As a reminder, the remedies will be provided to you free of charge and Bendix will cover the installation labor charge to complete the remedies. Expect the repair to take about an hour.
WHAT YOU SHOULD DO
Please contact your Bendix Account Manager to schedule an onsite visit from Bendix personnel to remedy your vehicle.
Our records indicate that Business Name has received xx of the suspect Intellipark DECUs from Bendix.
Please note that Bendix may already have performed the remedy on your vehicle(s). See Table below of affected VINs and Bendix repair records as of the time of this mailing.
| Affected VIN | Bendix Remedy | Already Repaired as of the date of this notice | Repair Still Required |
| 12345678901234567 | Electronic Recalibration of existing DECU | Repaired by
Bendix on x/x/2021 |
None |
| 12345678901234567 | Physical replacement of existing DECU | NO | Yes |
IF YOU ARE A VEHICLE LESSOR
If you are a lessor of vehicles equipped with the Intellipark Parking Brake System’s Dash Electronic Control Units (DECUs), Federal law requires that any vehicle lessor receiving the recall notice must forward a copy to the lessee within ten (10) days.
HOW TO CONTACT US
Please telephone our Recall Assistance Center with any questions you may have about this voluntary safety recall campaign. The toll-free telephone number is 1-800-AIR-BRAKE (1-800-247-2725), option 2. Bendix Tech Team representatives are ready to assist you Monday-Thursday, 8:00 a.m. – 6:00 p.m. ET, and Friday 8:00 a.m. – 5:00 p.m. ET. You may also email the recall center any time at intelliparkcampaign21@bendix.com.
If you believe Bendix Commercial Vehicle Systems LLC has failed – or is unable to remedy the defect of the aforementioned Intellipark Parking Brake System’s Dash Electronic Control Units (DECUs) without charge and in a reasonable time following this notification – you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to www.safercar.gov.
We regret any inconvenience this voluntary recall campaign may cause you. We appreciate your understanding and cooperation in this matter.
Sincerely,
Bendix Commercial Vehicle Systems LLC
September 30, 2021
Via UPS Overnight Delivery
Name
Title
Corporation Name
Street
City, ST Zip
Dear (Name):
IMPORTANT RECALL INFORMATION – RESPOND IMMEDIATELY
This is to inform you that Bendix Commercial Vehicle Systems LLC (Bendix) notified the National Highway Traffic Safety Administration (NHTSA) of the start of a voluntary safety recall campaign involving the Bendix® Intellipark® electronic Dash Electronic Control Unit (DECU). The recall has been assigned number 21E070.
A copy of our August 6, 2021, Defect and Noncompliance Information Report submission to NHTSA can be found on the NHTSA website (https://www.nhtsa.gov/recalls) under recall number 21E070. As required by law, Bendix provided NHTSA a list of all vehicle or equipment manufacturers to whom Bendix provided the affected products outright. Corporation Name is one of the customers who may be affected by this recall.
IMPACTED PRODUCT
This recall includes all Intellipark DECUs manufactured before June 15, 2021. This action does not affect Intellipark DECUs manufactured after June 15, 2021.
Please refer to the Bendix Intellipark Parking Brake System Recall Technical Bulletin, (TCH-003-060) enclosed with this document for complete details. This Technical Bulletin includes all relevant identification guidelines.
PROBLEM DESCRIPTION
Bendix has determined that the DECU of the affected Bendix Intellipark electronic parking brake control systems incorrectly detects an internal fault at speeds up to 3.1 mph (5 kph). The fault disables the Intellipark system, meaning the loss of the primary Intellipark function to park and unpark the vehicle. In this situation, the driver cannot change the parking brake state using the dash-mounted switches. Flashing of the dash-mounted LED indicator signals that the electronic parking brake system is not available. The driver may not be aware that the park brake is not set. This could lead to unintended vehicle movement increasing the risk of a crash.
The driver must turn off the ignition and fan down the service brakes to deplete the reservoirs. The low pressure triggered by this action prompts a spring brake application to park the vehicle. The internal system fault will clear when the vehicle ignition is turned off for at least 35 seconds and then back on.
WHAT WE WILL DO
Bendix Commercial Vehicle Systems LLC (Bendix) will voluntarily remedy the defect of the impacted Bendix® Intellipark® Parking Brake System’s Dash Electronic Control Unit (DECU) by re-calibrating the Intellipark system’s reaction to the fault. This recalibration will allow the system to return to normal operation – once the internal fault is no longer active – allowing the driver to operate the electronic park brake system as normal.
The recalibration that enables you and your customer to complete the recall remedy is available as of the date of this notification via your Bendix Account Manager. Please note, some software versions cannot be electronically recalibrated, so a physical replacement of the DECU will be necessary. As a reminder, the remedies will be provided to you free of charge and Bendix will cover the installation labor charge to complete the remedies. Expect the repair to take about an hour.
WHAT YOU NEED TO DO
First, we are providing you with this information to enable your business to determine whether there is a safety related defect on your vehicles where the affected Bendix Intellipark DECU has been installed.
Based on your determination, you may need to file a Defect and Noncompliance Report to the National Highway Traffic Safety Administration (NHTSA) with respect to new motor vehicles with an affected Bendix Intellipark electronic parking brake control system sold in the United States. A similar notification is required to Transport Canada for all impacted vehicles sold in Canada.
Our records indicate that Corporation Name received XX quantity of the suspect Intellipark DECUs from Bendix.
| Bendix Part Number | Description | Quantity | Bendix Remedy |
| K12345 | Bendix® Intellipark® DECU | x | ELECTRONIC RECALIBRATION of existging DECU |
| K12345 | Bendix® Intellipark® DECU | x | PHYSICAL REPLACEMENT of DECU |
For your convenience, the following is provided to help you in this recall process:
- the above count of the affected Bendix® Intellipark® Parking Brake System’s Dash Electronic Control
Units (DECUs) received by your company (by part number); and
- The Bendix Intellipark Parking Brake System Recall Technical Bulletin, (TCH-003-060) will assist you in properly identifying impacted systems.
We value our business relationship with you. We regret the inconvenience that may result from these circumstances, and we sincerely appreciate your understanding and cooperation in this matter. If you have any questions or require more information, please do not hesitate to reach out to your Bendix Account Manager directly. You may also contact us via email at intelliparkcampaign21@bendix.com, or by telephone – toll-free – at 1-800-AIR-BRAKE (1-800-247-2725), option 2. Bendix Tech Team representatives are ready to assist you Monday-Thursday, 8:00 a.m. – 6:00 p.m. ET, and Friday 8:00 a.m. – 5:00 p.m. ET.
William P. Amato
Director – Product Safety, Warranty, and Advanced Quality
Encl.
1 Affected Product
Equipment
| BRAND | PART NO. | PRODUCTION DATES |
| BENDIX | INTELLIPARK | |
7 Associated Documents
Defect Notice 573 Report
RCLRPT-21E070-7061.PDF 215.673KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-21E070-9358.pdf 645.151KB
Loading...
Recall 573 Report – Amendment 1
RCLRPT-21E070-1063.PDF 217.093KB
Loading...
Recall Quarterly Report #2, 2021-4
RCLQRT-21E070-6309.PDF 211.236KB
Loading...
Remedy Instructions and TSB
RCRIT-21E070-0361.pdf 1014.292KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-21E070-2343.pdf 508.088KB
Loading...
Manufacturer Notices(to Dealers,etc)
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21E070&docType=RCL
- Specifically engineered to provide premium performance for everyday driving conditions
- Application specific semi-metallic, ceramic and organic friction materials with First To Market coverage
- Shim materials quiet noise, vibration and harshness
- Consistent fit, form and function including slots and chamfers when designed by Original Equipment
- Abutment clips and integral electronic wear sensors included where applicable
- Asbestos free and made from new steel.Material:Steel
- Secondary post cure and precision cam ground
- Post cured for more brake power and shorter break-in time
- Shoes are Arc Ground for proper fitment
- Superior durability made to last
- SUPER PREMIUM GRADE: Raybestos Element3 Brake Shoes offer super premium replacement brake shoes made with organic materials to ensure the best performance and service life
- NEW STEEL: Premium new steel, either contour or cam ground--depending on the application--facilitates proper shoe to drum contact to ensure great stopping power
- SUPERIOR DURABILITY: Premium dipped coating provides resistance for superior durability and reliability in long term use
- EASY INSTALLATION: Attached levers and hardware included where applicable for easy and complete installation
- VEHICLE FIT: Buick Rainier 2004-2007; Cadillac DeVille 2000-2005, DTS 2006-2011, Escalade 2002-2014, Escalade ESV 2003-2014, Escalade EXT 2002-2013; Chevrolet Astro 2003-2005, Avalanche 2007-2013, Avalanche 1500 2002-2006, Express 1500 2003-2014, Silverado 1500 1999-2013, Silverado 1500 Classic 2007, Silverado 1500 HD 2001-2003, 2005-2006, Silverado 2500 2004, Silverado 2500 HD 2004-2005, SSR 2003-2006, Suburban 1500 2000-2014, Suburban 2500 2003-2005, Tahoe 2000-2014, Trailblazer 2002-2009, Trailblazer EXT 2002-2006
- OPTIMAL BRAKING PERFORMANCE -- OE-matched friction material for optimal brake performance
- MAXIMIZES FRICTION-TO-DRUM CONTACT -- Precision ground material maximizes friction-to-drum contact
- MATCHES OE DESIGN --Attached levers and pins included to match OE (on specific applications)
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- HARDWARE INCLUDED -- Attached levers and pins to match OE are included on select applications
- Direct replacement - this parking brake hardware kit is designed to match the original hardware required to repair the parking brake on specified vehicles
- Ideal solution - this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction - this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
- Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
- Includes necessary hardware for easy installation
- Thoroughly manufactured to meet your expectations for fit, form, and function
- Country of Origin: Taiwan, Province Of China
- Performs to standards required by OE manufacturers ensuring optimal protection, service life, and safety
- Manufacturer Part# 1911785 1911594.
- Fitment: Fit for Polaris UTV as Follows ▶ Ranger 500 2010 ▶ Ranger 800 2010-2014 Exclude 6x6, Mid-size Edition ▶ Ranger 800 Crew 2010-2014 Exclude 6x6, Mid-size Edition
- Feature：OEM specifications. Parking Brake Caliper is made of high-quality materials, it is not easily deformed and has a long service life.
- Package：Parking Brake Caliper × 1.
- Service: If there is any product problem within 1 year, please contact us to solve it for you.We provide product service.
- Asbestos free and made from new steel
- Secondary post cure and precision cam ground
- Post cured for more brake power and shorter break-in time
- Shoes are Arc Ground for proper fitment
- Superior durability made to last
- OPTIMAL BRAKING PERFORMANCE -- OE-matched friction material for optimal brake performance
- MAXIMIZES FRICTION-TO-DRUM CONTACT -- Precision ground material maximizes friction-to-drum contact
- MATCHES OE DESIGN -- Attached levers and pins included to match OE (on specific applications)
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- HARDWARE INCLUDED -- OE-style lubricant and abutment clips are included
- Precision engineered OE style design ensures proper fit for a no hassle installation
- 100 percent asbestos-free friction formulations for extended wear, consistent braking performance and long life
- 100 percent all-new steel provides durable construction for long life
- Rust inhibitive coating prevents rust and extends durability
- Set includes brake shoes for 1 axle (2 wheels); Bonded construction; Hardware kit not included
Last update on 2024-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.