“This site contains affiliate links for which OEMDTC may be compensated” |
July 23, 2021 NHTSA CAMPAIGN NUMBER: 21E067000
Spindle Nuts Improperly Tightened
Improperly torqued spindle nuts may cause excessive axle vibration, and overheat the bearings that can affect vehicle control, increasing the risk of a crash.
NHTSA Campaign Number: 21E067
Manufacturer Terran Axle LLC
Components SUSPENSION
Potential Number of Units Affected 5,796
Summary
Terran Axle LLC (Terran Axle) is recalling certain Trailer Axles part number 020401. The spindle nuts on these axles may have been improperly tightened during assembly.
Remedy
Dealers will manually inspect the spindle nuts for proper torque and bearing damage. The spindle nuts will be properly tightened and bearings replaced as necessary, free of charge. Owner notification letters were mailed August 2, 2021. Owners may contact Terran Axle customer service at 1-312-741-3848.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
TERRAN AXLE | SPINDLE NUT |
6 Associated Documents
Defect Notice 573 Report
RCLRPT-21E067-6656.PDF 217.02KB
Recall Acknowledgement
RCAK-21E067-8505.pdf 727.696KB
Recall Quarterly Report #1, 2021-3
RCLQRT-21E067-6400.PDF 211.123KB
Recall 573 Report – Amendment 2
RCLRPT-21E067-2827.PDF 217.619KB
Recall Quarterly Report #2, 2021-4
RCLQRT-21E067-1650.PDF 211.227KB
Recall 573 Report – Amendment 1
RCLRPT-21E067-4742.PDF 217.09KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21E067&docType=RCL
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
- Spindle includes spindle nut, spindle washer, and cotter pin.
- 4-4" BT8 hub pre raced and studded.
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
- Pair of 1" straight spindles includes castle nuts and cotter pins.
- Bearings included - (4) L-44643 1" inside dimension.
- Hubs have pre-installed pressed in races.
- Hub has a 5-bolt pattern on 4-1/2" bolt circle. Pilot diameter 2.59", flange diameter 6-1/2" and measures 4-1/4" tall (through center of hub)
- Spindles feature a SQUARE 1-1/2" stock diameter with a bearing surface of 1 Inch
- 1" diameter bearing surfaces
- 1-1/2" square mounting surface
- Capacity 1,000 lbs - Thread 1"-14
- Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
- Read product description below for more information
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
- Spindle includes spindle nut, spindle washer, and cotter pin.
- 5-4.5" BT8 hub pre raced and studded.
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
- 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
- 1.75" square mounting surface
- Capacity 1,750 lbs - Thread 1"-14
- Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
- Read product description below for more information
- 1.376" diameter inner bearing surface - 1.061" diameter outer bearing surface
- 1¾" diameter mounting surface - 4-hole flange for mounting brake backing plate
- Capacity 1,750 lbs - Thread 1"-14
- Inner/outer bearings, seal not included - Nut, washer and cotter pin are included
- Read product description below for more information
- 1 1/4" Diameter, 3 3/8" long shaft, BT8 1" spindle.
- Spindle includes spindle nut, spindle washer, and cotter pin.
- 5-4.5" BT8 hub pre raced and studded.
- Hub includes inner and outer bearing L44643, seal, grease cap, and lug nuts.
- Rated at 1000 lbs. per spindle, two will hold 2,000 lbs.
Last update on 2024-06-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.