“This site contains affiliate links for which OEMDTC may be compensated” |
July 7, 2021 NHTSA CAMPAIGN NUMBER: 21V515000
Insufficient Trailer Shell Support Bracket
A detached trailer shell can create a road hazard and increase the risk of a crash.
NHTSA Campaign Number: 21V515
Manufacturer Xtreme Outdoors
Components STRUCTURE, EQUIPMENT
Potential Number of Units Affected 18
Summary
Xtreme Outdoors is recalling certain 2021 MyPod travel trailers. The support bracket that secures the trailer shell to the frame may be insufficient, which could cause the trailer shell to detach.
Remedy
Dealers will inspect the support bracket, and replace the frame if necessary, free of charge. Owner notification letters were mailed July 16, 2021. Owners may contact Xtreme Outdoors customer service at 1-740-788-9560.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Overview:
This bulletin is a quick photo verification of one or more of the frame to body mounts on the 2021 MyPod. Xtreme Outdoors believes that it has located and accounted for all the defective frames. However, out of an abundance of caution, we are implementing this Recall Bulletin to ensure that there are no additional defective frames in your inventory or that have been sold to consumers.
Issue:
Support brackets that secure the body of the MyPod to the trailer frame can potentially fail. Xtreme Outdoor discovered that certain frames used an out of specification support bracket that may not properly secure the trailer’s body to the frame. Trailers utilizing this insufficient bracket could result in the trailer’s body detaching during transit, creating a road hazard for trailing drivers.
Correction:
To correct this defect, Xtreme Outdoors asks you to please confirm whether the trailer body is attached to the trailer’s frame using the correct bracket: 3/16″ thick, 2″ wide, extruded aluminum angle. Units equipped with the incorrect bracket will have a 1/8″ thick, 2″ wide bent aluminum angle that may also have visible fractures. Do not use the unit with the incorrect bracket and contact Xtreme Outdoors Warranty Department at 814-701-4891.
Incorrect Mount Size
This 1/8″ L-bracket is the incorrect thickness not to the original design of this model.
Correct Mount thickness
This L-bracket support mount is the correct thickness at 3/ 16″. Please confirm your unit has this mount.
Dear Xtreme Outdoors Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Xtreme Outdoors has decided that a defect which relates to motor vehicle safety exists in certain model 2021 MyPod trailers, manufactured by Xtreme Outdoors between 03/23/2021 and 05/26/2021. We are notifying you because our records indicate that you are the current owner of the trailer listed above. Therefore, please review this letter carefully.
What is the Problem?
Support brackets secure the shell of the MyPod to the trailer frame. Xtreme Outdoor discovered that certain trailers used an out-of-specification support bracket, which may not properly secure the trailer’s shell to the frame. Trailers using this insufficient bracket could result in the trailer’s shell detaching during transit, creating a road hazard for trailing drivers.
What Are We Doing About the Problem?
To correct the bracket issue, Xtreme Outdoors will inspect your trailer’s support brackets to ensure the correct brackets were used. At your earliest convenience, you follow the enclosed instructions to photograph the support brackets used on your trailer and to submit the photographs electronically to Xtreme Outdoors to review. Alternatively, you may contact your nearest Xtreme Outdoors dealer to arrange an inspection.
If the inspection reveals that your trailer uses the out-of-specification brackets, Xtreme Outdoors will replace the trailer’s frame, which will be equipped with proper support brackets. This remedy will take approximately 12 hours and will be completed free of charge. Trailers already equipped the correct support brackets will not need to be repaired.
If you no longer own the MyPod trailer, please forward this notice to the new owner and provide the new owner’s address to us at recall@goxtoutdoors.com.
Federal law requires vehicle lessors receiving this recall notice to forward a copy to the lessee within ten days. Also, it is a violation of Federal law for a dealer to deliver a new trailer covered by this recall notice under a sale or lease until the noncompliance has been remedied.
SEOCONTENT-START
Page 1 of 2
IMPORTANT SAFETY RECALL
RECALL NO. 21V-515
July 2021
This notice applies to your trailer:
Make Model Model Year Vehicle Identification Number (VIN)
Xtreme Outdoors MyPod 2021 XXXXXXXXXXXXXXXXX
Dear Xtreme Outdoors Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Xtreme Outdoors has decided that a defect which relates to motor vehicle safety exists in certain model 2021 MyPod
trailers, manufactured by Xtreme Outdoors between 03/23/2021 and 05/26/2021. We are notifying you because our
records indicate that you are the current owner of the trailer listed above. Therefore, please review this letter carefully.
What is the Problem?
Support brackets secure the shell of the MyPod to the trailer frame. Xtreme Outdoor discovered that certain trailers used
an out-of-specification support bracket, which may not properly secure the trailer’s shell to the frame. Trailers using this
insufficient bracket could result in the trailer’s shell detaching during transit, creating a road hazard for trailing drivers.
What Are We Doing About the Problem?
To correct the bracket issue, Xtreme Outdoors will inspect your trailer’s support brackets to ensure the correct brackets
were used. At your earliest convenience, you follow the enclosed instructions to photograph the support brackets used
on your trailer and to submit the photographs electronically to Xtreme Outdoors to review. Alternatively, you may contact
your nearest Xtreme Outdoors dealer to arrange an inspection.
If the inspection reveals that your trailer uses the out-of-specification brackets, Xtreme Outdoors will replace the trailer’s
frame, which will be equipped with proper support brackets. This remedy will take approximately 12 hours and will be
completed free of charge. Trailers already equipped the correct support brackets will not need to be repaired.
If you no longer own the MyPod trailer, please forward this notice to the new owner and provide the new owner’s address
to us at recall@goxtoutdoors.com.
Federal law requires vehicle lessors receiving this recall notice to forward a copy to the lessee within ten days. Also, it is a
violation of Federal law for a dealer to deliver a new trailer covered by this recall notice under a sale or lease until the
noncompliance has been remedied.
Page 2 of 2
Questions or Concerns?
If you have questions or concerns about this recall, please contact Xtreme Outdoors at (888) 469-8688 or
recall@goxtoutdoors.com. If you are unable to obtain a remedy without charge within a reasonable time, you may submit
a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington,
DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to
https://www.safercar.gov.
We are taking this action in the interest of your safety and satisfaction with our products. We apologize for any
inconvenience and thank you for your attention to this matter.
Sincerely,
Xtreme Outdoors
***********************************************************************************************************
Recall Bulletin :
NO. 21V-515
Models:
Xtreme Outdoors 2021 MyPod
Overview:
This bulletin is a quick photo verification of one or more of the frame to body mounts on the 2021 MyPod. Xtreme Outdoors
believes that it has located and accounted for all the defective frames. However, out of an abundance of caution, we are implementing
this Recall Bulletin to ensure that there are no additional defective frames in your inventory or that have been sold to
consumers.
Issue:
Support brackets that secure the body of the MyPod to the trailer frame can potentially fail. Xtreme Outdoor discovered that
certain frames used an out of specification support bracket that may not properly secure the trailer’s body to the frame. Trailers
utilizing this insufficient bracket could result in the trailer’s body detaching during transit, creating a road hazard for trailing drivers.
Correction:
To correct this defect, Xtreme Outdoors asks you to please confirm whether the trailer body is attached to the trailer’s frame using
the correct bracket: 3/16″ thick, 2″ wide, extruded aluminum angle. Units equipped with the incorrect bracket will have a 1/8″
thick, 2″ wide bent aluminum angle that may also have visible fractures. Do not use the unit with the incorrect bracket and contact
Xtreme Outdoors Warranty Department at 814-701-4891.
Install Time: 0.25hr For photo verification.
VIN Range:
Non-sequential range: 1X9TT111XM1 — 1X9TT1114M1
Please contact us with any questions, concerns or comments:
Corporate Office Sales: 1-888-469-8688
Sales Support: support@goxtoutdoors.com
Warranty & Tech Support Phone: 814-701-4891
Warranty Email: warranty@goxtoutdoors.com
Parts Email: parts@goxtoutdoors.com
Technical Support & Parts Phone: 814-701-4884
Technical Support Email: ts@goxtoutdoors.com
Xtreme Outdoors
1519 Boettler Rd. Suite A
Uniontown, OH 44685
Sincerely,
Xtreme Outdoors Llc.
~X TRE /t\E I OUTDOOR~
Incorrect Mount Size
This 1/8″ L-bracket is the incorrect
thickness not to the original design of
this model.
Please take photos of one or more of these mounting brackets and submit them in an email to
Recall@goxtoutdoors.com You can also take your unit to your selling dealer to have this bulletin
completed. Dealers can submit a claim for the allotted time if a customer wants a dealer inspection.
Correct Mount thickness
This L-bracket support mount is the
correct thickness at 3/ 16″. Please confirm
your unit has this mount.
*
*
*
*
*
*
*
***************************************************************************************************************SEOCONTENT-END
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
XTREME OUTDOORS | MYPOD | 2021 |
7 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-21V515-9009.pdf 536.009KB
Recall Acknowledgement
RCAK-21V515-3575.pdf 646.371KB
Manufacturer Notices(to Dealers,etc)
RCMN-21V515-8372.pdf 791.571KB
Recall 573 Report – Amendment 1
RCLRPT-21V515-4490.PDF 215.527KB
Recall 573 Report – Amendment 2
RCLRPT-21V515-3836.PDF 215.677KB
Recall Quarterly Report #1, 2021-3
RCLQRT-21V515-6225.PDF 211.12KB
Recall Quarterly Report #2, 2021-4
RCLQRT-21V515-0276.PDF 211.22KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V515&docType=RCL
- PORTABLE PROPANE CONVENIENCE: Enjoy clean-burning, portable propane fuel with the Coleman 16 oz bottles, perfect for outdoor adventures.
- VERSATILE OUTDOOR COOKING: Designed to fit most portable appliances, camping grills, and lanterns with a standard CGA 600 connection, providing versatility for various outdoor cooking needs.
- COMPACT AND LIGHTWEIGHT DESIGN: Each cylinder weighs only 16 ounces, ensuring easy transport and storage during camping trips, hiking excursions, or tailgating events.
- DURABLE AND RELIABLE: Crafted with durable steel and equipped with reliable valves, the Coleman propane bottles offer safe and easy use for all your outdoor propane needs.
- BUNDLE DEAL: Get the Coleman 3-Pack Propane Bottles for Convenient Outdoor Fuel Supply!
- Portable and convenient: The Bernzomatic 14.1 oz Propane Hand Torch Cylinder offers a portable and convenient fuel source for your hand torch. Its slim and lightweight design allows for easy grip and maneuverability during use, making it a practical choice for various applications.
- Durable construction: Constructed with durable steel, this propane cylinder ensures reliability and longevity. Its sturdy build can withstand regular use and provides a reliable fuel source for your hand torch, ensuring consistent performance over time.
- Compatibility with Digital Fuel Gauge: The cylinder is compatible with the Digital Fuel Gauge, allowing you to easily monitor the amount of fuel remaining. This feature helps you avoid running out of fuel in the middle of a task and allows for better planning and management of your work.
- High flame temperature: Propane fuel provides an impressive in-air flame temperature of 3,600 degrees Fahrenheit. This high temperature allows for efficient and quick heating, making it suitable for various applications, such as soldering, brazing, and other torch-based tasks.
- Versatile applications: With the Bernzomatic 14.1 oz Propane Hand Torch Cylinder, you can tackle a wide range of tasks. Whether you need to heat, solder, braze, or perform other torch-related activities, this cylinder provides a reliable and versatile fuel source to meet your needs.
- ITEMS INCLUDED – (2) Refillable Empty 1LB Propane Tanks, (2) Caps, and (2) Allen Keys - 2mm (5/64") in size
- REDUCE WASTE - Keep disposable propane tanks out of the environment by using the Flame King 1LB refillable cylinders
- SAFE TO USE - Flame King refillable propane tanks are the only 1LB tanks Certified by the DOT as legally and lawfully refillable and transportable; it is not safe or legal to refill and transport disposable 1LB tanks
- SAVE TIME - Refill from the comfort of your backyard in few easy steps (please watch the video); compatible with any appliance that uses a 1LB propane tank
- SAVE MONEY - Stop wasting money on disposable tanks and start saving money with our reusable, safely and easily refillable propane cylinders
- Known for Compatibility — Alloxity propane hose adapter is specifically designed to fit perfectly for Weber Q grills, Coleman camping stoves, Blackstone 17" & 22" griddles (regulator needed) and Buddy heaters. Moreover, this propane adapter hose can easily connect most 1lb. LP outdoor appliances to 5-40lb propane tanks, making it an ideal choice for camping, tailgating, heating or outdoor grilling.
- Save Tons of Money — Alloxity propane tank adapter is an excellent solution to save money. By connecting the propane hose to a 20lb tank, you can replace expensive 1lb bottles and save up to $100. Updating your propane setup with Alloxity propane adapter 1lb to 20lb will be a perfect way to minimize your cost and stop any waste caused by disposable 1lb propane bottles.
- Long-lasting Hose Construction for Safer Connection — Updated stainless steel braiding protects the propane tank hose from rodents’ chewing. The propane hose consists of weather-resistant PVC, highly tensile cotton braiding, anti-corrosion PVC tube and stainless steel braiding. With a sturdy and flexible 4-layer structure, the propane adapter is strong enough to withstand harsh outdoor environments, ensuring durability.
- Easy to Install within 2 Minutes, No Tools Needed — The heavy-duty brass fittings are precisely designed to ensure easy connection. Hand tighten the brass connectors to finish the installment, taking less than two minutes. Our 1lb to 20lb propane tank adapter with 5ft length provides larger space to set up your appliance and propane tank, increasing flexibility and safety.
- 1-year Quality Support — Alloxity is committed to providing superior product durability and quality. To ensure security and high performance, the lp adapter 20lb to 1lb is rigorously tested and CSA certified. However, if you encounter any issues, please don’t hesitate to contact us. Solutions will be worked out for you in 24 hours.
Last update on 2024-03-26 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.