Recall 51-1359 – Clearance Lamps Not Reflective Enough/FMVSS 108 – 2021 Forest River Salem Fifth Wheel, Salem Travel Trailer, Wildwood Fifth Wheel, & Wildwood Travel Trailer

“This site contains affiliate links for which OEMDTC may be compensated”

June 11, 2021 NHTSA CAMPAIGN NUMBER: 21V443000

Clearance Lamps Not Reflective Enough/FMVSS 108

Less reflective clearance lamps can affect how other drivers judge the length of the trailer, increasing the risk of a crash.

 

NHTSA Campaign Number: 21V443

Manufacturer Forest River, Inc.

Components EXTERIOR LIGHTING

Potential Number of Units Affected 289

 

Summary

Forest River, Inc. (Forest River) is recalling certain 2021 Salem Fifth Wheel, Salem Travel Trailer, Wildwood Fifth Wheel, and Wildwood Travel Trailer vehicles. The red and amber clearance lamps do not reflect enough light. As such these vehicles fail to comply with Federal Motor Vehicle Safety Standards (FMVSS) number 108, “Lamps, Reflective Devices, and Assoc. Equipment.”

 

Remedy

Dealers will add reflex stickers to both the amber and red clearance lamps, free of charge. Owner notification letters were mailed June 11, 2021. Owners may contact Forest River customer service at 1-574-534-3167. Forest River’s number for this recall is 51-1359.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Dear Forest River Customer:

This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This notice is also sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Forest River – Office of Corporate Compliance (“OCC”) has decided that a defect, which relates to the motor vehicle safety, exists in certain 2021 Salem and Wildwood Travel Trailer and Fifth Wheel recreational vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, reflective devices and associated equipment”. Additionally, this non-compliance fails to meet the requirements of Canadian Motor Vehicle Safety Regulations; Part 108 “Lamps, reflective devices and associated equipment”. This is to inform you that your vehicle may be non-compliant with the requirements of the Motor Vehicle Safety Regulations and that the non-compliance could affect the safety of a person.

 

WHAT IS THE DEFECT/NONCOMPLIANCE?

The driver and passenger side clearance lamps (amber and red) fail to meet F/CMVSS 108 for lens reflectivity.

 

EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.

Without proper reflectivity of the side clearance lamps, the length of the trailer may not be visible to other vehicle
operators, which may cause a crash, property damage or injury.

 

WHAT IS FOREST RIVER AND OUR DEALERSHIPS GOING TO DO?

Forest River is notifying dealerships of the recall. You may have the recall corrected at any Forest River dealership.

However, it is preferable if you have your selling dealership perform the remedy. Forest River completely covers your cost for the remedy; you will not receive any bill of sale for anything covered under the above recall number.

 

WHAT SHOULD YOU DO?

Please contact your dealer immediately and request a service appointment to schedule the free remedy which includes adding a Reflex Sticker to each amber and red clearance lamp. The vehicle Owner is responsible for arranging to have the work completed. Please state you have been notified by Forest River of having a recall in process for your vehicle and provide the recall number for the dealership. It is also helpful to the dealership to have a copy of this letter when you take your vehicle in for the recall remedy. You may also visit www.forestriverinc.com for dealer locations.

 

HOW LONG WILL THE REMEDY PROCESS TAKE?

The estimated time of repair is .20 hours. However, the dealership may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.

 

WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?

If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall inspected and/or performed to ensure the correct parts and procedures were utilized.

Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope of this defect under recall.

Please send the service invoice to the following address:

Salem/Wildwood
Forest River, Inc.
Attn: WARRANTY MANAGER
1803 Century Dr.
Goshen, IN 46528

 

 



2 Affected Products

Vehicles

MAKE MODEL YEAR
FOREST RIVER SALEM 2021
FOREST RIVER WILDWOOD 2021

 


7 Associated Documents

Recall Acknowledgement

RCAK-21V443-3793.pdf 645.88KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.74 KB]

 


Defect Notice 573 Report

RCLRPT-21V443-9977.PDF 214.154KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.13 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-21V443-1235.pdf 212.573KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [207.59 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-21V443-8963.pdf 220.928KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [215.75 KB]

 


Recall Quarterly Report #1, 2021-2

RCLQRT-21V443-5376.PDF 211.137KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.19 KB]

 


Recall Quarterly Report #2, 2021-3

RCLQRT-21V443-9990.PDF 211.234KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.28 KB]

 


Recall Quarterly Report #3, 2021-4

RCLQRT-21V443-7607.PDF 211.327KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.37 KB]

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V443&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
TMH 3/4 Inch Mount 10 pcs Amber + 10 pcs Red LED Clearance Bullet Side LED Marker Lights for Trailer Truck RV Car Bus Van (Pack of 20)
  • Brand: TMH with 1 Year Premium Warranty
  • Pack of 20 pcs : 3/4 inch 10 Amber + 10 Red Light Round Bullet Miniature side marker
  • Brightness : 60 lumen each light with 3 pcs High Quality SMD LED 100,000hrs Lifetime
  • PC lens + Waterproof + Shockproof + Dustproof
  • Easy to install with FREE High Quality Rubber Cover , No crack forever
Bestseller No. 2
10 Pcs 2.5 Inch LED Trailer Lights 2 Diode Waterproof LED Trailer Side Marker Lights Oval Signal Running Lights For Truck Boat RV(Amber, Red)
  • Adequate in quantity: the package comes with a total of 10 pieces of LED trailer marker lights, including 5 red and 5 amber; Each trailer side marker light includes 2 pieces stainless steel screws for surface mounting
  • Easy method to operate: the wires of led trailer lights come out from the center, not the corner ; What's more, red is the positive electrode and black is the negative electrode, the installation can be completed by tightening the screw
  • Match diverse cars: these 12V trailer marker lights are suitable as LED marker lamps, car side lamps, trailer lamps for many kinds of cars, such as trucks, trailers, boat trailers, RVs, and more
  • Waterproof design: our RV trailer lights are designed with totally enclosed circuit, waterproof and can keep away from dirt; In addition, the lenses are not easy to fade due to exposure to sunlight and rain water, bringing you a nice experience
  • Lasting and serviceable: each RV signal light is made of quality LED and plastic, not easy to deform and break, and can use for a long time; The surfaces of these lights are smooth and comfortable to touch, do not need to worry about scratching your fingers
Bestseller No. 3
Partsam 14x Trailer RV Marker LED Light Double Bullseye 10 Diodes Clearance Light Red/Amber, 4x2 Tiger Eye/Double Bubble 12V Rectangular LED Side Marker Light Indicators Surface Mount Camper Trucks
  • Warning: Wires come out from the conner, NOT from the center. (Check image 2)
  • Partsam (7) Amber + (7) Red Oval Oblong Side Marker Light Lamps; It is Universal For all auto esp. RV Trailer Camper Boats etc. 【Tip: wires were brought out at the lower corner of the light and not the center,】
  • Can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc.
  • About 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1" oval oblong rectangular rectangle led light sealed
  • Tiger Eye / Double Bubble LED Marker Lights; Led Marker TRAILER LIGHTS EXTERIOR LIGHTS; LED running lights Side fender lights side body lights. bullseye led side fender marker lights; Trailer-Style Rectangular LED Marker OR Turn Signal Lights
SaleBestseller No. 4
Nilight - TL-16 2PCS 3.9 Inch 3 LED Truck Trailer Amber Light Front Rear LED Side Marker Lights Clearance Indicator Lamp Perfect Sealed Waterproof Surface Mounted LED Marker Light, 2 Years Warranty
  • Featured Functions: Used as led marker light in front, rear side roof top or led clearance light indicator light on any 12V pickups truck trailers SUV RV van caravan camper boat lorry bus etc.
  • Upgraded LEDs: Use 3 quality Piranha LED, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber light
  • Awesome Reflector Design: The marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance
  • Highly sealed: Lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. Be ready for all weather abuse
  • Simple Installation: Black wire for ground, red wire for positive. Just fix the black base with the 2 flat head screws provided, and then snap the light into the base. To run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole. 2 Years Warranty Honored by Nilight.
Bestseller No. 5
Konrali 14Pcs Double Bullseye Led Marker Lights 10 LED, 2x4 Rectangle Led Trailer Marker Lights Red/Amber Surface Mount 12V Airstreams RV Camper Led Marker Clearance Lights Sealed (7 Amber+ 7 Red)
  • This listing features for 7 pieces double bullseye amber trailer marker lights and 7 pieces double bullseye red trailer side marker lights, 14 pieces in total. Each rv clearance light includes 2 pieces stainless steel screws for surface mounting;
  • Dimensions: 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1" approx. and fit on standard 3" centers; The rectangular tiger eye led marker light features a replaceable, snap-on lens, and is hardwired with 2 wires to mount to any surface: black is ground and red is positive;
  • Each 2x4 led marker light come with 10 super bright LEDs and operate within a wide 9-14.8V DC range. Rather than double bullseye led marker lights, people also call these rectangle led trailer marker lights as "tiger eye led marker lights" or "double bubble led marker lights". You can truly mount this rv camer marker light anywhere on the truck;
  • As many bullseye marker lights on market have the wires exit from the corner, our led markers have the wires exit form the middle. Also they come with the led chips, not the led diodes, which will be brighter and have longer lifetime. These 12V rectangle LED lights are universally for most trucks, trailers, pickups, RVs, Campers etc. esp. ideal for cab and sleeper panels;
  • Warranty: We will offer 1 YEAR WARRANTY for these rectangular led marker lights since you place the order. Please feel free to send us email if there's any issue before or after purchase and we will reply in 24 hours;
Bestseller No. 6
PSDRIQQ LED Trailer Lights Kit Front Rear Side Marker Clearance Indicators Light Lamp, 10Pack Amber + 10Pack Red DC12-24V 2.5" Waterproof Universal for RV Camper Truck Van Caravan Boat
  • ✅【 High Brightness 】- High-quality lamp beads. Built-in 2LEDs for each lamp offer extreme bright light. Well made and very visible even in bright daylight. Provides you with maximum visibility and safety when driving on the road at night, foggy, or rainy.
  • ✅【 Fitment 】- Universal Fit for Almost all DC12-24V Vehicles, Truck, Trailer, Semi-trailer, Van, Pickup, Lorry, Tractor, Bus, Car, RV, Boat, Caravan, Camper, Offroad, UTV, ATV, SUVs, UTE, Pickup, etc.
  • ✅【 Usage 】- Can function as led trailer marker lights, side marker lights, roof lights, clearance marker lights, fender lights, running lights, left/right/front/rear/side indicator lights, tail lights, exterior safety signal lights, and identification lamps.
  • ✅【 Easy to Install & Waterproof 】- Surface Mount. With mounting screws. Black Wire: Negative. Another Wire: Positive. Fully enclosed circuit, dustproof, shockproof, IP68 waterproof ready for all weather. Will not fade from exposure to sunlight or rain. High-quality ABS plastic shell & LED lamp beads, low consumption and energy saving, up to 100,000 hours of service life.
  • ✅【 AFTER-SALES SERVICE 】- 20 Pack include: 20x trailer lights, 40x screws. We provide 24-hour customer service and a 30-day money-back guarantee. If you have any questions, please feel free to contact us.
Bestseller No. 7
20 PCS 2.5 inch LED Trailer Lights Kit with Screws, Front Rear Side Marker Clearance Indicators Light Lamp, Amber + Red Dc12-24V Waterproof Universal Accessories for Rv Camper Truck Van Caravan Boat
  • ✨【 High Brightness 】- High-quality lamp beads. LOQOMI Built-in 2LEDs for each lamp offer extreme bright light. Well made and very visible even in bright daylight. Provides you with maximum visibility and safety when driving on the road at night, foggy, or rainy.
  • 🚨【Adequate in quantity】- The LOQOMI package comes with a total of 20 pieces of LED side marker lights, including 10 red and 10 amber; Each trailer side marker light includes 2 pieces stainless steel screws for surface mounting.
  • ✨【 Easy to Install】- The wires of led trailer lights come out from the center, not the corner ; What's more, red is the positive electrode and black is the negative electrode, the installation can be completed by tightening the screw
  • 🚨【Waterproof Design】- Our car side led lights are designed with totally enclosed circuit, IP68 waterproof and can keep away from dirt; In addition, the lenses are not easy to fade due to exposure to sunlight and rain water, bringing you a nice experience.
  • ✨【Unparalleled Durability】- each RV signal light is made of quality LED and plastic, not easy to deform and break, and can use for a long time; The surfaces of these lights are smooth and comfortable to touch, do not need to worry about scratching your fingers.
Bestseller No. 8
Partsam 10x 4 Double Bullseye Amber 10 LED Side Marker Lights, Smoke Lens Rectangular Rectangle Tiger Eye Clearance Light for Truck Trailer RV Camper Motorhome
  • Partsam 10Pack SMOKE LENS AMBER Double Bullseye LED Trailer Clearance and Side Marker Light, 2 Wire; Each light boasts 10 high-flux LEDs that operate within a wide 9-14.8V DC range and consumes 90% less energy than incandescent lamps. Sonically sealed polycarbonate lens and weatherproof housing;
  • This double-bullseye LED light can be used as a clearance or marker light; These LED lights have the "double bullseye" design just like the marker/clearance lights on Airstreams from 1969 and many later models; These lights go by a few different names - tiger eye and double bubble are the most common ones that we hear. This is a nice-sized light for anywhere on the truck.
  • About 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1"; The light features a replaceable, snap-on lens. The white base surface mounts on standard 3" centers, and the two-wire design includes the lead and ground wires to mount to any surface.
  • Different form many bullseye lights selling on the market, The wires do not exit from the middle but form the corner. Black is the Negative and Red is the Positive; These 12V LED lights are universally wired for most trucks, trailers, pickups, semis, vans, RVs, Campers, buses, boats, ATVs, emergency vehicles, short trailers & extended trailers.
  • Ideal for cab and sleeper panels Usage: side marker lights, clearance lights, roof lights, corner rear/front/side lights, cab lights, clearance lamp, identification light, turn signal light etc.
SaleBestseller No. 9
Nilight 10 PCS 3/4 Inch Round LED Clearance Light LED Front Rear Side Marker Indicator Light Bullet Marker Light for Truck RV Car Bus Trailer Van Caravan Boat, 2 Years Warranty
  • Mini Size Bright Light For Your Night: Each 3/4” mini side marker light comes with 3PCS SMD LEDs inside, outputs 60 lumen premium bright light to save your night. Work perfectly for 100, 000 hours lifetime
  • Surface Mount & 2-Wire Design: Light comes with rubber grommet for surface mount, 3/4” hole size. 9inch 2-wire leads with black for ground/negative while white for positive
  • Maximum Durability: Waterproof PC lens, rubber cover sealed light and putting glue sealed wire combined makes the light super durable, waterproof rate IP68. No cracks forever
  • Wide Application: Universally fits on all cars with 12V DC Trailers clearance bus van caravan, boat lorry pickup truck, etc. Can be mounted on the side front, rear undercarriage function as clearance, side marker, turn signal light or light trailer
  • Package Includes: 10pcs white light. Come with 2 year replacement. 2 Years Warranty Honored by Nilight.
SaleBestseller No. 10
Partsam 5X Amber 24 LED Smoke Cab Roof Running Top Marker Lights 264146BK Assembly Wire Harness Replacement for 1500 2500 3500 4500 5500 2003-2018 Pickup Trucks
  • Part number: 264146BK
  • Application: Cab Marker Lights, Roof Cab Marker, Roof Running Light, Clearance Light.
  • Every Kit Features Super Strong ABS Plastic Lenses which have been UV treated so they will not fade from prolonged exposure to sunlight and weather elements.
  • Modification or drilling might be required. Professional installation is highly recommended; Not Plug & Play;Easy to install: just remove your factory cab lights and bolt these in their place. Wiring: White is to Ground and Black is to Positive.
  • Tips: The mounting holes are on the front and back, if yours are on the left and right side. Positioning & drilling is needed, please for another type!

Last update on 2024-06-18 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...