“This site contains affiliate links for which OEMDTC may be compensated” |
April 6, 2021 NHTSA CAMPAIGN NUMBER: 21V242000
Exceeding Charge Limit May Cause Battery Shutdown
Opening the main contactor may cause a battery shutdown and loss of motive power, increasing the risk of a crash.
NHTSA Campaign Number: 21V242
Manufacturer Arcimoto Inc
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 252
Summary
Arcimoto Inc. (Arcimoto) is recalling certain 2019-2021 FUV, Deliverator, Rapid Responder, Roadster motorcycles. The inverter’s firmware may allow the Kinetic Energy Recovery System (aka “regen”) to exceed the Current Charge Limits and cause the Battery Management System to open the main contractor.
Remedy
Arcimoto will notify owners, and will update the firmware, free of charge. The recall began April 27, 2021. Owners may contact Arcimoto customer service at 1-541-683-6293.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Regulatory Recall Report | RRR0024 | ||
Inverters Exceeding Current Limit May Cause Battery Shutdown | Rev: 1 | ||
Author: MM, RS | PO: Dir of GRC | Appr: Dir of GRC | Date: 06/23/2021 |
1 SUMMARY
In accordance with Part 573 of Title 49 of the Code of Federal Regulations, Arcimoto Inc. hereby reports a safety issue and intends to recall quantity two-hundred fifty-two (252) Arcimoto Deliverator-1, Rapid Responder, FUVs and Roadsters produced between September 19, 2019 and March 10, 2021. Due to unintended firmware behavior, the inverters disrespect the Battery Management System’s (BMS) Current Charge Limits (CCL) when using the throttle and the kinetic energy recovery system (KERS aka “regen”) simultaneously. Repeated and/or sustained exceeding of the CCL can cause the BMS to open the main contactor, leading to unexpected battery shutdown and immediate loss of motive, which would make the vehicle more difficult to control and increase the likelihood of a crash.
Note: Fields left blank will be marked “NR” meaning “Not Reported” in public view.
2 NHTSA MANUFACTURER RECALL PORTAL FIELDS
(c)1 IDENTIFICATION OF THE MANUFACTURER, IMPORTER, DISTRIBUTOR, OR BRAND NAME OWNER
Manufacturer: | Arcimoto, Inc. |
Address: | 2034 W. 2nd Ave., Eugene OR 97402 |
Contact: | John W. Dorbin, Jr.
General Counsel and Corporate Secretary Arcimoto, Inc. |
(c)2 VEHICLE INFORMATION
Model Year Start: | Type: |
2019 | MOTORCYCLES |
Model Year End: | Body Style: |
2021 | OTHER |
Make: | Powertrain: |
Arcimoto | HYBRID ELECTRIC |
Model: | Descriptive Information: |
Deliverator-1, Rapid Responder, FUV and | Affects all two-hundred fifty-two MY2019 |
Roadster | – MY2021 vehicles (fifty-seven MY2019 T-FUV, one-hundred twenty-six MY2020 T-FUV, six MY2020 D-Deliverator-1, four MY2020 R-Roadster, three MY2021 D-Deliverator-1, one MY2021 E-Rapid Responder, two MY2021 R-Roadster, fifty-three MY2021 T-FUV) produced from 09/19/2019 through to 03/10/2021. |
Production Dates: | Begin: 09/19/2019 | End: 03/10/2021 |
VIN Range(s):
(T – FUV, tandem) |
Begin:
7F7ATR312KER00000 |
End:
7F7ATR317KER00056 |
VIN Range(s):
(D – Deliverator-1, single) |
Begin:
7F7ADR316LER00001 |
End:
7F7ADR315LER00006 |
VIN Range(s):
(T – FUV, tandem) |
Begin:
7F7ATR312LER00001 |
End:
7F7ATR310LER00126 |
VIN Range(s):
(Roadster, tandem) |
Begin:
7F7ARR314LER00001 |
End:
7F7ARR31XLER00004 |
VIN Range(s):
(D – Deliverator-1, single) |
Begin:
7F7ADR314MER00001 |
End:
7F7ADR318MER00003 |
VIN Range(s):
(Rapid Responder, tandem) |
Begin:
7F7AER318MER00001 |
End:
7F7AER318MER00001 |
VIN Range(s):
(Roadster, tandem) |
Begin:
7F7ARR312MER00001 |
End:
7F7ARR314MER00002 |
VIN Range(s):
(T – FUV, tandem) |
Begin:
7F7ATR310MER00001 |
End:
7F7ATR318MER00053 |
(c)3 TOTAL NUMBER POTENTIALLY INVOLVED, (c)4 ESTIMATED PREVALENCE OF DEFECT
Number potentially involved: 252 | Estimated percentage of involved with defect: 100% |
(c)5 DEFECT / NONCOMPLIANCE DESCRIPTION
For this Defect/Noncompliance:
Describe the defect or noncompliance: | Describe the safety risk: |
Due to unintended firmware behavior, the inverters do not respect the Battery Management System’s (BMS) Current Charge Limits (CCL) when using the kinetic energy recovery system (KERS aka “regen”). Repeated and/or sustained exceeding of the CCL can cause the BMS to open the main contactor. | Repeated and/or sustained exceeding of the CCL can cause the BMS to open the main contactor, leading to unexpected battery shutdown and immediate loss of motive power, which would make the vehicle more difficult to control and increase the likelihood of a crash. |
If a noncompliance, provide the applicable FMVSS: | Identify any warning which can precede or occur: |
None. | |
If applicable, provide any further FMVSS affected: | |
Describe the cause: | |
A firmware update from Arcimoto’s inverter supplier appears to cause unintended firmware behavior. | |
This Recall affects all vehicles. |
If applicable, identify the manufacturer of the defective or noncompliant component. If the manufacturer of the component is unknown, provide the information for the company that supplied the subject component.
Component Manufacturer: | |
Company Information: | Company Contact Information: |
Company Name: | First Name: |
Dana Inc. (formerly SME Group) | Peter |
Country: | Last Name: |
Italy | McDonald |
Address 1: | Position: |
Via della Tecnica, Z.I. 40 | Electrification Business Development
Manager – Americas |
Address 2: | Email: |
peter.mcdonald@dana.com | |
City: | Phone: |
Arzignano (VI) | 519-591-0965 |
State: | |
N/A | |
Zip / Postal Code: | |
36071 |
Components Involved: (Please list in numerical order) | |
Component Name (P/N + Description): | |
001052 BMS, Orion 2, Standard 36 Cell,
Factory Default Firmware & Profile |
|
Component Description: | |
BMS, Orion 2, Standard 36 Cell, Factory
Default Firmware & Profile |
|
Component Part Number: | |
001052 | |
Component Name (P/N + Description): |
003222 VCU, ECOTRONS, ES1274A | |
Component Description: | |
VCU, ECOTRONS, ES1274A | |
Component Part Number: | |
003222 | |
Component Name (P/N + Description): | |
003375 Firmware and Profile, Orion BMS2 | |
Component Description: | |
Firmware and Profile, Orion BMS2 | |
Component Part Number: | |
003375 | |
Component Name (P/N + Description): | |
004085 Inverter, SME, AC-X1, CAN programming interface | |
Component Description: | |
Inverter, SME, AC-X1, CAN programming interface | |
Component Part Number: | |
004085 | |
Component Name (P/N + Description): | |
004332 Kinetic Energy Recovery System,
ASSY |
|
Component Description: |
(c)6 CHRONOLOGY OF DEFECT / (c)7 NONCOMPLIANCE DETERMINATION
Describe the defect/noncompliance remedy program, including the manufacturer’s plan for reimbursement. |
Owners will be notified by mail and instructed to contact Arcimoto to schedule a service appointment to have their inverter firmware updated. There will be no charge to vehicle owners for this service. To the best of our knowledge, no owners have incurred any costs resulting from this defect. |
Kinetic Energy Recovery System, ASSY | |
Component Part Number: | |
004332 |
Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision: |
On February 9, 2021, a vehicle was reported to Arcimoto’s Service Department as shutting down unexpectedly. An immediate analysis of service records showed a total of four vehicles with potentially similar symptoms. BMS logs indicated that these four vehicles lost motive power because the BMS opened the main contactor. Logs also indicated overcurrent faults.
Testing immediately began on several vehicles in an effort to reproduce the fault but was initially unsuccessful. However, during testing it was observed that the inverters were not respecting the maximum CCL level set by the BMS. Although short CCL excursions can be tolerated, longer excursions have the potential to overload the battery, thus the BMS as an independent safety system will detect such potentially dangerous overcurrent conditions and will open the main contactor before any damage can occur.
Further testing was able to reliably provoke the failure mode and demonstrate that these repeated excursions did indeed cause the BMS to open the contactor.
Since this situation can result in a loss of motive power, an Engineering and Regulatory meeting was held on March 10, 2021 and recommended this issue to be escalated as a recall-candidate to Leadership. Leadership accepted the recommendation with a majority vote on March 29, 2021 and declared a voluntary safety recall. |
(c)8 IDENTIFY THE REMEDY
Describe what distinguishes the remedy component from the recalled component. |
Arcimoto is unable at this time to unilaterally fix the inverters; in certain situations, the inverters will continue to disrespect the Battery Management System’s (BMS) Current Charge Limits (CCL), such as when using the Kinetic Energy Recovery System (KERS aka “regen”) at the same time as the throttle.
However, Arcimoto has developed a modification to the Vehicle Control Unit (VCU) firmware that can successfully and consistently prevent motive battery-pack contactors from opening and causing battery shutdown in the event of the inverters disrespecting BMS CCL. The modified VCU firmware catches the failure mode in a fail-safe and prevents the shutdown cascade by reducing KERS, then turning KERS off, thus ensuring motive power is not lost. Specifically, the modified VCU firmware is intended to stop overcurrent excursions before the BMS reaches the decision to open the contactors (and thereby cascade a battery shutdown), by disabling the KERS in the event of an imminent BMS fault if the inverters violate the CCL.
Arcimoto will work with its inverter supplier to implement corrected inverter firmware via a service bulletin in the future. |
Identify and describe how and when the recall condition was corrected in production. |
Starting March 23, 2021, all vehicles in production are built with the same modified VCU firmware used as remedy, which will successfully and consistently prevent motive battery-pack contactors from opening and causing battery shutdown in the event of the inverters disrespecting BMS CCL. The modified VCU firmware catches the failure mode in a fail-safe and prevents the shutdown cascade by reducing KERS, then turning KERS off, thus ensuring motive power is not lost. |
IDENTIFY THE RECALL SCHEDULE
Describe the recall schedule for notifications: | Planned Dealer Notification Begin Date: |
Arcimoto does not intend to send any dealer or distributor notifications, as it has neither dealers nor distributors at this time. | N/A |
Planned Dealer Notification End Date: | |
N/A | |
Planned Owner Notification Begin Date: | |
04/19/2021 | |
Planned Owner Notification End Date: | |
05/03/2021 | |
Manufacturer’s identification code for this recall (if applicable): |
Please be reminded that owner notification letters must be mailed no more than 60 days from submission of this report.
MANUFACTURER COMMENTS TO NHTSA STAFF
Arcimoto does not intend to send any dealer or distributor notifications, as it has neither dealers nor distributors at this time.
DOCUMENT UPLOAD
1.1 (c)10 A representative copy of all notices, bulletins, and other communications that relate directly to the defect or noncompliance and are sent to more than one manufacturer, distributor, dealer or purchaser. These copies shall be submitted to NHTSA’s Recall Management Division (NVS-215)
3 REVISION HISTORY
Function | Role | Name | Signature | Date |
Author | RA-RCP | Matt M | <insert name> | 06/23/2021 |
Author | RA-RCA | Raymond S | <insert name> | 06/23/2021 |
Author | Dir of GRC | Pete Z | <insert name> | 06/23/2021 |
Author | Dir of Engineering | Gerrit H | Gerrit Hurenkamp | 06/23/2021 |
PO | Dir of GRC | Pete Z | <insert name> | 06/23/2021 |
Approver | Dir of GRC | Pete Z | <insert name> | 06/23/2021 |
Revision | Reason for change;
Summary of change from prior Revision |
|
# | Date Issued | |
0 | 03/31/2021 | Initial Issue:
Internal Outline of Defect and Noncompliance Report Format pursuant to §573.6. |
1 | 06/23/2021 | Updated to include component part, description and part number |
IMPORTANT SAFETY RECALL
This notice applies to your vehicle: 7F7ATR31XXXXXXXXX
April 27, 2021
Safety Recall: Inverters Exceeding Current Limit May Cause Battery Shutdown NHTSA Recall: 21V242
Dear <First name, Last name>:
This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Arcimoto has decided that a defect which relates to motor vehicle safety exists in certain 2019, 2020, and 2021 model year FUVs, Deliverators, Rapid Responder, and Roadsters.
! I PORTANT !
► Your vehicle is being recalled
► You should contact Arcimoto to schedule the repair at no charge
Why is your vehicle being recalled?
Due to unintended inverter behavior under certain conditions, use of the Kinetic Energy Recovery System (KERS aka “regen”) can lead to unexpected battery shutdown and immediate loss of motive power, which would make the vehicle more difficult to control and increase the likelihood of a crash.
What will we do?
Owners will be notified by mail and instructed to contact Arcimoto to schedule a service appointment to have their inverter firmware updated. There will be no charge to vehicle owners for this service.
What should you do?
Please contact Arcimoto to schedule a service appointment.
Do you have questions?
If you have any questions or concerns, do not hesitate to contact Arcimoto. Arcimoto’s main telephone number is 541-683-6293 or call Arcimoto Service and Product Support 541-780-0032.
If after contacting Arcimoto, you are still not satisfied that we have done our best to remedy this condition without charge, and within a reasonable time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is 21V242.
We apologize for any inconvenience this recall may cause you. Thank you for being an Arcimoto customer.
Sincerely,
Arcimoto, Inc.
Tel: (541) 683-6293
2034 W. 2nd Avenue, Eugene, OR 97402
Arcimoto, Inc.
2034 W. 2nd Avenue, Eugene, OR 97402 Tel: (541) 683-6293
12 Affected Products
Vehicles
MAKE | MODEL | YEAR |
ARCIMOTO | DELIVERATOR | 2019-2021 |
ARCIMOTO | FUV | 2019-2021 |
ARCIMOTO | RAPID RESPONDER | 2019-2021 |
ARCIMOTO | ROADSTER | 2019-2021 |
10 Associated Documents
Recall 573 Report
RCLRPT-21V242-6477.PDF 216.667KB
Recall 573 Report
RCLRPT-21V242-3742.PDF 216.667KB
Recall Acknowledgement
RCAK-21V242-3166.pdf 669.695KB
Remedy Instructions and TSB
RCRIT-21V242-4680.pdf 282.014KB
Part 577 Owner Notification Envelope
ISSUED Owner Notification Letter(Part 577)
RCONL-21V242-3709.pdf 132.551KB
Recall Quarterly Report #1, 2021-2
RCLQRT-21V242-6683.PDF 211.132KB
Defect Notice 573 Report
RCLRPT-21V242-7836.PDF 216.142KB
Recall Quarterly Report #3, 2021-4
RCLQRT-21V242-5231.PDF 211.315KB
Recall Quarterly Report #2, 2021-3
RCLQRT-21V242-8648.PDF 211.233KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V242&docType=RCL
- Charge with confidence: ChargePoint builds reliable, flexible and innovative EV charging stations for home, business and fleets. Drivers have access to 24/7 support and hundreds of thousands of places to charge across North America via the ChargePoint app.
- Charge Smart: With the in-depth, user-friendly ChargePoint Mobile App, you can control your electric car charger, easily manage and set reminders, connect to your smart home devices, find stations, get valuable data and charging information, and get access to the app's latest features.
- Vast Network: ChargePoint’s extensive network includes 274k+ ChargePoint stations across North America and Europe, so you have peace of mind wherever life takes you. You can even charge up at plus 565k+ ChargePoint roaming partner stations for added flexibility and convenience when you’re on the go.
- Safe & Durable: Rely on this EV charger to provide safe charging at home, adhering to UL safety standards; The charger can be installed indoor or outdoor with a weatherproof NEMA outlet and includes a cable that stays pliable in very cold weather.
- Fast & Powerful: This charger charges up to 7 times faster than a 110V outlet, delivering an impressive 30 miles of range per hour. The plug is compatible with all EVs (Tesla requires adapter) and works with a 14-50 outlet. Requires 40A or 50A-rated circuit.
- UL AND ENERGY STAR CERTIFIED LEVEL 2 EV CHARGER. DEFAULT CHARGE RATE is 40A. WiFi Internet connection is required to raise or lower charge rate. Pair with an Emporia Vue Smart Home Energy Monitor to automatically charge only with excess solar power and curb charging during peak demand.
- UL LISTED WITH YOUR SAFETY IN MIND. Manufactured to meet the safety criteria defined by these industry standards: NEC 625, SAE J1772, UL 817, UL 991, UL 2231, UL 2251, and UL 2594. INSTALLS INDOORS OR OUTDOORS. Your charger will be safe from the elements with a rugged watertight NEMA Type 4 enclosure. Check with your state and local company to see if there are incentives and rebates in your area. PROTECTED BY A 3-YEAR WARRANTY.
- PLUGGED OR HARDWIRED INSTALLATION - 11.5kW (240V/48A) / 9.6kW (240V/40A) / 10kW (208V/48A) / 8.3kW (208V/40A) (Preconfigured for NEMA Type 14-50P with 22" cable compliant with 2017 NEC Section 625.17(A)(3) for up to 40A or convert to Hardwired for up to 48A). Requires a dual-pole, dedicated breaker at 60A+ for a 48A charge or 50A+ for a 40A charge. A professional electrician is recommended for hardwiring or installing a NEMA Plug.
- COMPATIBLE WITH ANY EV. The charger comes with a SAE J1772 connector (adapter required for Tesla EVs) and a 24' cable with integrated cable management.
- REAL-TIME ENERGY DATA: REQUIRES 2.4 GHz WIFI WITH AN INTERNET CONNECTION to monitor energy use and charging sessions with iPhone / Android / Web Browser app. Schedule charging with the app. Easily manage the parameters to handle variable utility rate charges.
- Grizzl-E Classic NEMA 14-50 Plug with 24 Feet Premium Cable is a simple, powerful, heavy-duty and portable Electric Vehicle Charging Station which is suitable for normal and cold weather. Compatible with all EVs and PHEVs sold in North America.
- UL Full Tested and Certified. Eligible for Federal rebate program. IP67 (Water resistant), Fire resistant. Over Current, Over Voltage , Under Voltage, Missing Diode, Ground Fault, and Over Temperature Protections. Self-Monitoring and Recovery, Power Outage Recovery. Built in GFCI.
- Fast charging and adjustable amperage: 40A, 32A, 24A, 16A. Maximum current output of 40 Amps for 50A circuit breaker, 32 Amps for 40A circuit breaker, 24 Amps for 30A circuit breaker, or 16 Amps for 20A circuit breaker. Charge Rate: 28-30 miles per hour at 40A, 22-25 miles per hour at 32A, 15-18 miles per hour at 24A and 10-12 miles per hour at 16A.
- Easy to install and use. Save hundreds of dollars on installation : just install a simple 14-50R outlet and you are ready to plug in your Grizzl-E. Easily transportable. Simple to remove from the mounting bracket and transport between different locations. NEMA-4 water and air tight metal enclosure. More power and output configurations for your money than any other charging station.
- Fast charging Speed: Experience quick and efficient EV charging with the Stylish 16A Level 2 portable EV charger, Charge your car 4x faster than traditional 8A Level 1 chargers, providing a rapid charging solution for your electric vehicle
- Universal Compatibility: Suitable for all EV cars and plug-in hybrids, it's compact, durable, and perfect for home use. Enjoy the convenience of a 23ft cable, ideal for most driveways or garages, The EV charger is perfect for multi-vehicle owners or buildings with EV charging docks. Enjoy the flexibility of charging different electric vehicles with one reliable charger.
- Excellent Protection:With an intelligent chip, the Level 2 EV charger offers comprehensive protection including lightning, leakage, grounding, over voltage, under voltage, over charge, over current, and overheat protection. CE certification, IP66 control box and EV connector ensure safe and secure charging.
- Portable & Convenient:Effortlessly carry and store the EV charger with the included portable bag. Simply plug into a NEMA 6-20 outlet, the NEMA 5-15 Outlet is included , and the compact size, along with the 23 ft extra-long charging cable, ensures compatibility with most driveways or garages
- EVDANCE 12 Months Warranty: EVDANCE covers a period of 12 months from the date of purchase. During this time, if you encounter any issues with your charger that are due to manufacturing defects or workmanship, Our dedicated team will assist you in resolving the matter promptly.
- 9X FASTER: EVIQO is electric vehicle charger for home providing 38 m/h (40 amp ev charger by default) and 46 m/h if hardwired and set as a 48A EV charger. Max output for EV charging station level 2 is set with a dip switch. Adjustable current: 1A increment in EVIQO app. Stay EVIPOWER-ful with live 24/7 post-sale customer support.
- SAFE, USA CERTIFIED: EVIQO electric car charger level 2 is UL compliant, Energy Star, ETL and FCC certified EV charging station with 3-year Extended Manufacturer Warranty. EVIQO level 2 home ev charger is weatherproof. This EV car charger level 2 is suitable for use as an indoor/ outdoor EV charger. EVIQO EV wall charger level 2 meets NEMA 4 and IP66 protection standards.
- SMART APP: EVIQO surveyed 1,800 EV owners to create EV home charger level 2 app. Set up to 3 schedules for cost savings during off-peak rates. Get smart tips and reminders, track power/costs live and monitor the charging history. Enjoy sleek intuitive interface of your electric car charger 240v. EVIQO level 2 car charger consistently enhances its firmware with remote OTA updates.
- COMPATIBLE WITH ALL EVs: EVIPOWER electric car home charging stations are equipped with heavy duty rubberized SAE J1772 connector compatible with all EVs / PHEVs in NA: all Tesla models, Chevrolet Bolt, VW ID 4, Nissan Leaf, Polestar 2, Ford Mustang Mach-E, IONIQ 5/6, BMW i3, i4, iX, Mercedes EQS, Audi, Rav4, VW ID 4, Jeep Wrangler 4xe level 2 charger (Tesla requires an adapter).
- FIRST-IN-CLASS: EVIQO electric vehicle charging stations offer the MARKET'S LONGEST 37" input cable with a NEMA 14-50 plug along with a 25' EXTRA LONG output cable.
- 🔴HIGH-SPEED CHARGING EXPERIENCE: The TopAutoGear electric vehicle charger offers a maximum current output of up to 16 amps, delivering an ultra-fast charging speed for your electric car. No more worries about waiting for charging – get your vehicle ready to hit the road at a moment's notice.
- 🔵INTELLIGENT LCD DISPLAY: Equipped with an intelligent LCD display screen, the TopAutoGear electric vehicle charger provides a clear visual representation of the charging status, five-level current selection, and scheduled charging settings. Easily understand the charging process and make adjustments as needed. This smart design keeps you informed about the charging progress, ensuring that your charging always aligns with your plans.
- ⚫CHARGER FREELY:16-foot thick cable, allowing you to charge on-the-go with ease. Plus, we include a complimentary storage bag, adding a touch of ease and convenience to your charging experience.
- 🔴5 YEAR QUALITY ASSURANCE: Our five-year quality assurance reflects our unwavering confidence in product quality. The charger boasts an IP67 protection rating and has obtained UL and FCC certifications, featuring multiple safety protections like fire resistance, overcurrent, overvoltage, and over-temperature safeguards.
- 🔵BROAD COMPATIBILITY: Electric vehicle charger features a standardNEMA5-15P & 6-20 Plug and SAE J1772 interface, compatible with a wide range of vehicle models in the United States (Tesla requires an additional adapter). We provide you with comprehensive compatibility, ensuring a seamless connection for your charging experience.
- 🔌.Electric vehicle charging stations:This 7.68Kw 32A portable ev charger cable has a total length of 26ft, and a maximum voltage of 240V. Equipped with NEMA 14-50/5-15P Plug, suitable for charging most electric vehicles and plug-in hybrid vehicles that adhere to the J1772 standard. * Note: When the host displays an "E04" error, it means that the product does not have a grounding wire and cannot be charged normally. At this point you can try selecting "No grouding".
- 🔌.Multi-function display: This product is equipped with a display, you can adjust different (6/8/10/13/16/20/24/32A) currents on the display. Note: When using a 5-15P Plug, need to be used with current below 16A. · It has the function of setting scheduled charging, so that you can charge at the time you want (up to 5 hours can be reserved).
- 🔌.Safety Protection:This product has Leakage Protection, Short Circuit Protection, Over temperature Protection, Over voltage Protection ect multiple circuit protection, and it will automatically power off when fully charged. Please use it with peace of mind.
- 🔌.IP56 Waterproof & Heat Resistance:This cable has an IP56 waterproof rating and can work in -25 to +55 degrees Celsius. The cable outer layer is high-quality TPU cable thermoplastic and the display housing is made of PC94V-0 thermoplastic for long-term use and exposure to variable weather conditions.
- 🔌.2 year warranty:Our products have a 2-year warranty. If you have any questions about the product or have any problems with the product, you can contact us at any time. We will provide you with the best after-sales service.
- FAST CHARGING: EV Charger Level 2 240V charges up to 9X faster and delivers up to 11 kW/48 amps.
- INTELLIGENT CONTROL: LED screen shows charging stats and more. Use the App to save money by setting the charging start time to charge your vehicle during off-peak hours and tracking charging status.
- COMPATIBILITY with ALL EV CARS: (Tesla adapter included)Designed to be compatible with all SAE-J1772 electric vehicles and plug-in hybrids.
- SAFE AND RELIABLE: Our EV charger is IP66 waterproof and IK10 certified for use indoors or outdoors in all weather conditions.
- EASY TO INSTALL: The EV charger is easy to install and can be hardwired or plugged in.
- 【High Compatibility EV Charger】LiftSun EV charger is compatible with electric vehicles that meet SAE J1772 standards. our EV charger comes with NEMA 5-15 and 6-20 plugs that make it workable for both level 1 & level 2. The portable electric vehicle charger has an 21FT cable, long enough for most driveways or garages.
- 【Level 1+2 J1772 EV Charger】 Our EV charger cable is 4 times faster than a standard EV charger comes with your car under Level 2 charging mode. It has a power range of 95-265V, up to 16A for level 2, Enable you to charge quickly under Level 2 power supply.
- 【Safety Guarantee Car Charger】This Level 1+2 EV charger weatherproof rating is IP67, controller IP54, CE certification, with lightning protection, leakage, grounding, low voltage, overvoltage, overcharge, overheating and overcurrent and other multiple protection.
- 【Simple Designed EV Charger】The LifstSun EV Charger has LED indicator on the control box shows three different states: power, charge, and fault to help you identify the working status of EV charger and keep you informed of relevant charging information. If a fault is found, it will alert you and let you deal with the problem immediately.
- 【Portable Car Charging Station】Our portable EV charger is lightweight designed and included storage bag to makes it easy to carry around and stay organized in your car, allowing you to charge anywhere, anytime, without having to find an EV charging station outside. We provide a durable NEMA 5-15P to 6-20R adapter, This EV charger can be carried directly in the car, always available, and can be charged anywhere there is a 120V or 240V socket.
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.