“This site contains affiliate links for which OEMDTC may be compensated” |
March 3, 2021 NHTSA CAMPAIGN NUMBER: 21V133000
Flexible Section Of Exhaust System May Separate
An exhaust gas leak in the engine compartment increases the risk of a fire.
NHTSA Campaign Number: 21V133
Manufacturer Altec Industries, Inc.
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 355
Summary
Altec Industries, Inc. (Altec) is recalling certain 2017-2019 DC1317 and DRM12 Chippers equipped with a gasoline engine. The flexible section of the exhaust pipe may separate, creating an exhaust gas leak.
Remedy
Altec will notify owners, and owners will receive instructions to replace the flex pipe, free of charge. The recall began April 28, 2021. Owners may contact Altec customer service at 1-877-462-5832. Altec’s number for this recall is CSN 802.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL
This notice applies to your vehicle. See attached serial number list.
NHTSA Safety Recall
No. 21V-133
April 30, 2021
Dear Altec Owner,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act, and Canada Motor Vehicle Safety Act.
Altec Industries, Inc. has decided that a defect which relates to motor vehicle safety exists in certain DC1317 and DRM12 chippers equipped with a Kubota gas engine. This includes units built prior to June 2018 that had an engine enclosure update kit installed according to SIL 681 and certain units built between June 2018 and June 2019. The flexible section of the exhaust pipe can separate and create an exhaust gas leak in the engine compartment, creating the risk of a fire.
Refer to CSN 802 for the items covered under the warranty policy. Altec will supply the necessary parts to correct this condition free of charge.
In order to determine if your unit is affected by CSN 802, compare the VIN number of your unit with the list of affected units attached to the CSN. The repair can be performed by the customer or you may contact Altec at 1-877-GO-ALTEC (1-877-462-5832) for further assistance. The repair is expected to take 1 hour to complete.
At any time, you may contact Altec at 1-877 GO ALTEC (1-877-462-5832) with your unit’s serial number to determine if there are any other outstanding notices.
For US owners: after contacting Altec, if you are still not able to have the safety condition remedied without charge and within a reasonable time, you may submit a complaint to: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590 or call toll-free 1-888-327-4236 (TTY: 1-800-424-9153) or go to https://www.safercar.gov.
For Canadian Owners: if you are still not able to have the safety condition remedied by your dealer within a reasonable time, please contact Altec Customer Service at 1-877-GO-ALTEC (1-877-462-5832).
If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. If you have sold or retired the unit, please call Altec at 1-877-GO-ALTEC (1-877-462-5832) so the records may be changed.
If you have leased this equipment to another person or company, you are required by Federal Law to forward a copy of this notice to the lessee by first class mail within ten (10) days of the receipt of this notice.
We are sorry to cause this inconvenience; however we are taking this action in the interest of your safety and continued satisfaction with Altec products.
Thank you for your immediate attention on this important matter.
CSN 802
Customer Service Notice
April 30, 2021
Units Affected: Certain DC1317 and DRM12 chippers equipped with a Kubota gas engine. This includes units built prior to June 2018 that had an engine enclosure update kit installed according to SIL 681 and certain units built between June 2018 and June 2019 (Verify that your unit VIN number is affected by reviewing the attached list in this CSN or by accessing your fleet on connect.altec.com/login)
Exhaust System Update
Altec is committed to providing our customers safe and reliable products from initial delivery throughout the useful life of the unit.
Altec has discovered that the flexible section of the exhaust pipe can separate and create an exhaust gas leak in the engine compartment on the affected units. An exhaust gas leak in the engine compartment creates the risk of a thermal event. Injury and property damage can result from a thermal event in the engine compartment.
A kit has been developed by the engine supplier to replace the flexible section of the exhaust pipe with an improved version. Altec requires that the kit be installed on each unit no later than the next regular maintenance interval or 90 days of the receipt of this CSN, whichever comes first. Order the Chipper Exhaust Flex Pipe Kit, part number 991309526, by calling 1-877-GO ALTEC (1-877-462-5832).
This repair is covered under the Altec Warranty Policy and can be performed by Altec, the customer, or the customer’s warranty provider. Altec will perform the repair for free at an Altec facility. If the customer, or the customer’s warranty provider performs the repair, a warranty claim must be submitted to be reimbursed for the cost of the parts and/or labor. Altec will allow up to $90 for the labor to perform this repair. Call 1-877-GO ALTEC (1-877-462-5832) to schedule the work to be done by an Altec service technician. Customers are responsible for the travel costs of an Altec Mobile Service technician if the technician performs the repair at the owner’s location.
Altec Use Only | |
Inspection labor | 0.0 hr |
Repair labor | 1.0 hr |
Account # | 010.0690.43151.523.0000.000 |
Travel | Not included |
NHTSA code | 06 |
Prime fail P/N | N/A |
Doc ref | N/A |
Altec Use Only | |||
Parts Kit | Part No. | Qty | Warranty |
Chipper exhaust flex pipe kit | 991309526 | 1 | Yes |
6 Affected Products
Vehicles
MAKE | MODEL | YEAR |
ALTEC | DC1317 CHIPPER | 2017-2019 |
ALTEC | DRM12 WOOD CHIPPER | 2017-2019 |
7 Associated Documents
Recall Quarterly Report #1, 2021-2
RCLQRT-21V133-2876.PDF 211.142KB
Defect Notice 573 Report
RCLRPT-21V133-5125.PDF 212.808KB
Recall Acknowledgement
RCAK-21V133-2734.pdf 645.607KB
Recall 573 Report- Amendment 1
RCLRPT-21V133-1993.PDF 213.648KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V133-7727.pdf 769.229KB
Recall Quarterly Report #3, 2021-4
RCLQRT-21V133-2769.PDF 211.328KB
Recall Quarterly Report #2, 2021-3
RCLQRT-21V133-3082.PDF 211.243KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V133&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- Powerful 15-amp motor shreds branches and sticks up to 1. 75" inch thick
- Chute and tamper tool to keep your hands free and safe from the corded electric chipper/shredder
- Easy clean-up with the 1.2 Bushel collection bin
- Electric corded chipper/shredder shreds sticks to a fine ratio, great for composting
- Durable back wheels that offers easy portability on the electric corded chipper/shredder
- POWERFUL - This Wood Chipper Shredder Mulcher has an all powerful recoil starting AlphaWorks 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine producing 3600RPMs & a rowdy 10.7 ft lbs of torque, handling up to 3" diameter wood without a problem
- EFFFICIENT PERFORMANCE - This Mini Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1, capable of high volume Chipping/Shredding/Mulching via the Large Extended Feeing Hopper Chute for up to 3" inch MAX branches, limbs and garden debris
- UNIQUE DESIGN - Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90°-145° degrees; User-Friendly features like the Easy-Pull Recoil Starter & easy pour Accu-Fill design
- SAFETY - Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; Emission Compliant with CARB PHASE III & EPA Phase III; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended)
- BEST APPLICATION - Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines
- Efficient Shredding: Power through yard debris with a 15-amp motor, turning waste into 1.73-inch thick mulch, boosting garden health and appearance.
- Eco-Friendly: Embrace garden care with zero carbon emissions, enriching soil while preserving the air quality.
- Safety Ensured: Equipped with a safety hopper and locking knob that halts operation when opened, ensuring peace of mind during use.
- Highly Portable: Compact design featuring 7-inch wheels, easily move and store this chipper/shredder wherever needed.
- Simple and Maintenance-Free: Enjoy a garden cleanup solution that's easy to assemble, virtually maintenance-free, and ready to tackle yard waste immediately.
- EFFICIENT PERFORMANCE - This Mini Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1, capable of high volume Chipping/Shredding/Mulching via the Large Extended Feeding Chute for up to 3" MAX branches, limbs & garden debris. CR12MoV cutting blades (x2) debris
- UNIQUE DESIGN - Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90°-145° degrees
- POWERFUL - This Chippers powerful recoil starting 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity. Max speed: 3600RPM,Max torque: 9.14ft-lbs@2500RPM (ENGINE OIL NOT INCLUDED)
- SAFETY - Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection; This machine is EPA/CARB Certified
- BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves, and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines. Can be used to aid in fire prevention and building firebreaks.
- MULTI-FUNCTION CAPABILITY - This 3-in-1 Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1 when using the top Hopper for 1/2" MAX volume Chipping/Shredding; Side Chute for 3" MAX branch/limbs, or the attachable leaf vacuum for mulching. professional design w/ CR12MoV cutting blades.
- POWERFUL - This Chippers powerful recoil starting 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity. Max speed: 3600RPM,Max torque: 9.14ft-lbs@2500RPM
- EFFICIENT DESIGN - Hookup your favorite: ATV, lawn mower or small tractor, for easy transportation with a Tow Bar Kit (SOLD SEPARATELY) and use the vacuum inlet for easy leaf mulching with a Vacuum Kit (SOLD SEPARATELY)
- SAFETY - Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection; Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
- BEST APPLICATION - Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), petrified wood or vines
- EFFFICIENT PERFORMANCE; This Mini Wood Chipper Shredder Mulcher design has a Reduction Ratio of 15:1, capable of high volume Chipping/Shredding/Mulching via the Large Extended Feeing Chute for upto 3" MAX branches, limbs and debris
- UNIQUE DESIGN; Built to be compact and lighter than other steel chippers, this design has a highly desirable Vertical Extended Discharge Chute with Adjustable Discharge Guide to deliver accurate debris discharge, with a angled range of 90°-145° degrees
- POWERFUL; This Chippers powerful recoil starting 7HP Horizontal 4-stroke Single Cylinder OHV Gas Powered Engine, handles up to 3" diameter wood without a problem; Fuel w/ 87+ unleaded gasoline (NO ETHANOL recommended), 0.7 gallons Max capacity
- SAFETY; Always operate according to directions outlined in the user manual, always wear the appropriate hand and eye protection (ENGINE OIL NOT INCLUDED); Can be used to aid in fire prevention and building firebreaks; This machine is EPA/CARB Certified
- BEST APPLICATION; Use for Forestry, Gardens, Landscaping or Green Waste Recycling to chip tree branches/limbs, shred brush, mulch leaves and corn stocks; DO NOT use for: fresh greens, pine cones, palm branches (fronds will jam), pertrified wood or vines
- STRONGER 9HP ENGINE - Equipped with a robust 9HP 274CC Heavy Duty engine, the EFCUT C40 wood chipper gas powered ensures Faster Wood Chipping, efficiently shredding more piles of branches in less time, quickly getting your job done.
- 4 INCH MAX CAPACITY - With a 15.9" Larger Flywheel than other brands, and longer blades crafted entirely from high-speed steel, this wood chipper shredder gas powered, shreds thicker wood up to 4 inch diameter faster and cuts more branches at once. Less downtime, more efficiency.
- MULCH MADE EASY - this wood chipper shredder mulcher easily transforms wood waste into valuable mulch with a 15: 1 reduction ratio, effortlessly reducing 15 piles to 1. Simplify the disposal of your sticks, brushes, branches, and other garden debris.
- EASY TO USE - Starting with straightforward assembly, the C40 mulcher chipper shredder features a spacious feeding hopper for easy wood loading, saving you effort; the precise adjustment discharge chute allows you to direct wood chips anywhere you want with ease.
- DURABLE CONSTRUCTION - Designed for robust outdoor chipping performance, this wood shredder features sturdy construction built for years of reliable use, making it an ideal partner for your landscaping needs.
- POWER: 15-AMP motor shreds branches up to 1.5-inches in thickness into nutrient-rich garden mulch
- TURN MESSES TO MULCH: Reduce 10 bags of bulky yard debris into 1 bag of mulch
- DENT-RESISTANT HOUSING: Chipper shredder is designed with durable polypropylene material for a quality-driven experience
- EASY TO OPERATE: Confidently insert debris into the chipper shredder with the included push paddle
- INCLUDES: Electric wood chipper shredder, push paddle, and collection bag.
- POWERFUL: 224cc Champion single-cylinder OHV engine with a .92-gallon fuel tank and .63-quart oil capacity provides the power for fast, heavy-duty and hassle-free chipping and shredding
- HEAVY-DUTY: The chipper chute is equipped with hardened steel blades and handles branches up to 3 inches in diameter, plus the included 2-bushel collection bag makes yard cleanup a cinch
- VERSATILE: The shredder chute makes fast work of shrubbery, leaves or yard debris up to ½ inch or less in diameter, plus the rear access clean-out port makes it easy to remove any jams
- CONVENIENT AND COMPACT: The compact, lightweight design makes it easy to maneuver and takes up less space to store in your garage, shop, or shed
- CHAMPION SUPPORT: Includes 2-year limited warranty with FREE lifetime technical support from dedicated experts
- EXCELLENT PERFORMANCE - Powered by 212cc 4-cycle OHV engine, this wood chipper features 2 hardened-steel blades that handle branches up to 3 inches, while the shredder chute is perfect for shrubbery or leaves up to ½ inch or less.
- HEAVY DUTY - Featuring 2 J-shredder hammers and 2 rectangular hammers cuts wood down to size and mulches it with ease, this all-steel construction chipper mulcher is perfect for heavy-duty use.
- CONVENIENT & STABLE - Unique designed rear access clean-out port makes it easy to clear jams and replace the blades. Two 12" pneumatic tires with good elasticity and impact resistance provide reliable mobility. The wheel brake design ensures the gas mulcher remain stable while working.
- DO NOT CHIP - Please avoid chipping wet wood, vines, pine cones, palm branches, or petrified wood, as they may cause the machine to jam and fail.
- WARRANTY - If you have any questions or concerns, please contact us directly via Amazon email or our official website. Our support team is standing by to assist you.
Last update on 2024-03-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.