“This site contains affiliate links for which OEMDTC may be compensated” |
February 12, 2021 NHTSA CAMPAIGN NUMBER: 21V070000
3-Point Seat Belt Seats Installed Incorrectly
An incorrectly installed seat can increase the risk of injury in the event of a crash.
NHTSA Campaign Number: 21V070
Manufacturer Blue Bird Body Company
Components SEAT BELTS
Potential Number of Units Affected 619
Summary
Blue Bird Body Company (Blue Bird) is recalling certain 2020-2022 Vision and All American buses. The seats with integrated 3-point seat belts may have been installed incorrectly. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, “Seat Belt Assembly Anchorages.”
Remedy
Blue Bird will notify owners, and dealers will inspect the seats and install any missing hardware, as necessary, free of charge. The recall is expected to begin April 9, 2021. Owner notification letters were mailed February 03, 2022. Owners may contact Blue Bird customer service at 1-478-822-2242. Blue Bird’s number for this recall is R21BB-SB.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
RECALL
R21BB – Installation of Floor Tracks with 3-Point Seats
Models Affected: Certain 2019 – 2022 model year busses with 39” or 45”, 3-point seats installed on longitudinal floor track
Issue: On some affected buses, fasteners used to secure the floor track may be missing reinforcement plates, resulting in a non-compliance with FMVSS 210, Seat Belt Assembly Anchorages
Corrective Action: Inspect each floor track joint for correct fastener installation, install new fastener(s) if necessary.
WARNING: Always follow all Federal, State, Local and Shop safety standards and use proper safety equipment, and thoroughly read and understand all instructions before performing these procedures.
Park bus on level surface, apply parking brake, turn off ignition key, and chock wheels.
NOTE: This procedure outlines the process for one section of floor track. This process must be followed for every section or joint of floor track installed in the bus.
Inspection Instructions:
Locate the beginning and ending point of the floor track. Located within 1” of the ends of the floor track (item 1) will be capscrews (item 3). From the underside of the unit, inspect for installation of reinforcement plate (item 5), reference illustration 1.
NOTE: Capscrews, nuts and plates are installed within 1” from each end of the track or at a track joint. Magnabulb rivets (item 2) are installed on 2” centers in all other positions
- If fasteners are installed per illustration, no further work is required. Place bus back into service.
- If fasteners are not installed per illustration, proceed to repair instructions.
Repair Instructions:
1. At each end of the floor track (item 1), locate and remove the existing allen head screw (item 3) and nut (item 4). These may be discarded
2. Install new allen screw (item 3), plate (item 5), and nut (item 4) per illustration 1 and torqued to 8-10 FT – LBS
NOTE: When capscrew location falls out on top of an auxiliary crossmember use 4” capscrew 01666106
Items Needed:
Item | Part Number | Name | Quantity Required |
1 | 10039024 | Track, Aluminum | Reference only |
2 | 00106565 | Fastener, Huck, .31 Blind, Magnabulb | Reference only |
3 | 01467323
01666106 |
Screw, Allen Head, ¼-20 x 1.5, Countersunk, Flathead
Capscrew, Flathead, ¼-20 x 4 (required thru Aux Crossmember) |
As Needed |
4 | 00659979 | Nut, Hex, Flange, Ser, ¼-20, Black Zinc | As Needed |
5 | 01726389 | Plate, Underfloor | As Needed |
R21BB
IMPORTANT SAFETY RECALL NOTICE
NHTSA Campaign Number: 21V-070 (School Bus)
DATE: April 9, 2021
SUBJECT: R21BB – FMVSS 210 Noncompliance: Installation of Seats with 3-Point Belts with Floor Tracks
Dear Blue Bird Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
This important safety recall notice applies to your bus(es) identified by both Blue Bird Body Number and Vehicle Identification Number (VIN) on the enclosed yellow cover sheet. If you no longer own the subject bus(es), please complete the appropriate section of the yellow cover sheet and return to Blue Bird in the enclosed pink postage prepaid envelope.
Blue Bird Body Company is voluntarily recalling the following:
- Certain model year 2019 to 2022 Blue Bird Vision School Buses
- manufactured from January 15, 2019 through January 26, 2021
- Certain model year 2020 to 2022 All American School Buses
- manufactured from February 8, 2019 through December 18, 2020
On the subject buses, it has been determined that certain Blue Bird buses could fail to conform to the Federal Motor Vehicle Safety Standard Number 210, Seat Belt Anchorages.
Blue Bird shall conduct a voluntary safety recall to correct this noncompliance. The seat installation on subject buses must be inspected and corrected according to the Blue Bird recall instructions, if found to be installed incorrectly. Blue Bird evaluated the risk to motor vehicle safety related to this noncompliance and determined that, in the event of an accident, there is an increased risk of injury in a crash to the occupant if these 3-point seat belt seats are installed incorrectly.
Corrective Action:
To correct this noncompliance, Blue Bird will notify the affected owners and will provide inspection instructions and repair instructions. Visual inspection will be required to ensure that the proper seat hardware is installed. If any components are missing, the necessary seat hardware will need to be installed according to the Blue Bird recall instructions. You may request parts at campaignparts@blue-bird.com Parts will be available April 16, 2021.
Labor Reimbursement:
Blue Bird will reimburse the labor cost of potential repairs relating to this recall at no cost to you the vehicle owner. Repair Options and allowable labor times for this campaign are one of the outlined as follows:
- Repair A (1-4 Fasteners)
- 0.4 hours (24 minutes)
- Repair B (5-8 Fasteners)
- 0.8 hours (48 minutes)
- Repair C (9-12 Fasteners)
- 0.2 hours (72 minutes)
- Repair D (13-16 Fasteners)
- 1.6 hours (96 minutes)
Administering the Recall:
Blue Bird recommends that you contact your local or nearest Blue Bird Dealer to arrange for this recall to be performed. The Dealer can perform the repairs, or arrange for repairs to be performed by a service repair facility authorized by the Dealer. However, you may elect to perform this recall yourself or pay another independent repair facility to perform this recall. A qualified technician should perform this recall. If you elect to perform this recall yourself or pay another independent repair facility to perform this recall, complete and submit the Pink Owner’s Recall Reply Sheet provided. The Recall Reply Sheet includes a section for the owner to request reimbursement of the owner’s labor or to request reimbursement for a labor invoice paid by the owner to an independent repair facility.
Parts to complete Recall R21BB will be available April 16, 2021.
Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
If the modifications directed by this notification were performed on your bus prior to the receipt of this recall notification, attach a copy of the work order/invoice. Mail the documents in the pink self-addressed postage prepaid envelope included with the pink reply sheet to Blue Bird for warranty consideration. Reimbursements will be made in accordance with the requirements of the National Highway Transportation Safety Act, Title 49 Code of Federal Regulations, Parts 573 and 577.
Please contact your local Blue Bird Dealer with any questions regarding this recall campaign.
If Blue Bird Body Company should fail to or is unable to remedy this condition without charge to you, you may contact:
ADMINISTRATOR
NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION
1200 NEW JERSEY AVENUE, SE
WASHINGTON, D.C. 20590
Or, you may call The National Highway Traffic Safety Administration toll free at: 1-888-327-4236 TTY 1-800-424-9153 or go to: http:/www.safercar.gov
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
R21BB
IMPORTANT SAFETY RECALL NOTICE
NHTSA Campaign Number: 21V-070 (School Bus)
DATE: | April 9, 2021 |
TO: | U.S. DEALERS |
SUBJECT: | R21BB – FMVSS 210 Noncompliance: Installation of Seats with 3-Point Belts with Floor Tracks |
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
This important safety recall notice applies to your buses identified by both Blue Bird Body Number and Vehicle Identification Number (VIN) on the attached yellow cover sheet.
Blue Bird Body Company is voluntarily recalling the following:
- Certain model year 2019 to 2022 Blue Bird Vision School Buses
- manufactured from January 15, 2019 through January 26, 2021
- Certain model year 2020 to 2022 All American School Buses
- manufactured from February 8, 2019 through December 18, 2020
On the subject buses, it has been determined that certain Blue Bird buses could fail to conform to the Federal Motor Vehicle Safety Standard Number 210, Seat Belt Anchorages.
Blue Bird shall conduct a voluntary safety recall to correct this noncompliance. The seat installation on subject buses must be inspected and corrected according to the Blue Bird recall instructions, if found to be installed incorrectly. Blue Bird evaluated the risk to motor vehicle safety related to this noncompliance and determined that, in the event of an accident, there is an increased risk of injury in a crash to the occupant if these 3-point seat belt seats are installed incorrectly.
Corrective Action:
To correct this noncompliance, Blue Bird will notify the affected dealers and owners and will provide inspection and repair instructions. Visual inspection will be required to ensure that the proper seat hardware is installed. If any components are missing, the necessary seat hardware will need to be installed according to the Blue Bird recall instructions. You may request parts at campaignparts@blue-bird.com Parts will be available April 16, 2021.
Labor Reimbursement:
Blue Bird will reimburse the labor cost of potential repairs relating to this recall at no cost to you the Dealer or to the vehicle owner. Repair Options and allowable labor times for this campaign are one of the outlined as follows:
- Repair A (1-4 Fasteners)
- 0.4 hours (24 minutes)
- Repair B (5-8 Fasteners)
- 0.8 hours (48 minutes)
- Repair C (9-12 Fasteners)
- 0.2 hours (72 minutes)
- Repair D (13-16 Fasteners)
- 1.6 hours (96 minutes)
Administering the Recall:
Parts to complete Recall R21BB will be available April 16, 2021.
If Blue Bird’s records indicate bus(es) subject to this recall were delivered in your service area, a list of affected bus(es) will be enclosed. The bus(es) will be identified by Blue Bird Body Number and Vehicle Identification Number (VIN) on the enclosed yellow cover sheet. Dealers should verify correct owners and assure that complete mailing and shipping addresses are provided for each listed owner.
It is the Dealer’s responsibility to verify that the correct owner name, address, and telephone number is provided for each listed vehicle. Any corrections or updates should be made in ClaimsCenter. Addresses that cannot be updated should be forwarded to the Recall Administrator.
Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
Dealers are reminded of their responsibilities under Section 154 of The National Traffic and Motor Vehicle Safety Act of 1991. Dealers are required to complete modifications on units in their inventory before delivering to the final owner. Reference Blue Bird Body Company Distributor Memo No. 42-92.
If you have in your possession or have sold a bus that was purchased from another Dealer that may be affected by this recall, please notify Lisa Hancock at 478-822-2242 or lisa.hancock@blue-bird.com Questions regarding this recall campaign should be directed to Lisa Hancock, as well.
Sincerely,
Lisa Hancock
Corporate Recall Administrator
Blue Bird Corporation
3920 Arkwright Road, Suite 200, Macon, Georgia 31210
Phone 478.822.2242
lisa.hancock@blue-bird.com
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
SEOCONTENT-START
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
R21BB
SECOND FINAL NOTICE
DATE: February 8, 2022
TO: Blue Bird Owners
Subject: R21BB – FMVSS 210 Noncompliance: Installation of Seats with 3-Point Belts with Floor Tracks
According to our records, Campaigns Administration has not received confirmation that the above referenced recall, dated April 9, 2021, has been completed. A copy of Recall R21BB is attached. Your buses affected by Recall R21BB are identified by Blue Bird body number and VIN under Section 2 on the enclosed cover sheet.
If this is the first time you received notification of Recall R21BB, please read the enclosed notification carefully. Recall R21BB must be completed, as soon as possible. To correct this noncompliance, Blue Bird will notify the affected owners and will provide inspection instructions and repair instructions. Visual inspection will be required to ensure that the proper seat hardware is installed. If any components are missing, the necessary seat hardware will need to be installed according to the Blue Bird recall instructions. You may request parts at campaignparts@blue-bird.com
Labor Reimbursement:
Repair Options and allowable labor times for this campaign are one of the outlined as follows:
Repair A (1-4 Fasteners)
o 0.4 hours (24 minutes)
Repair B (5-8 Fasteners)
o 0.8 hours (48 minutes)
Repair C (9-12 Fasteners)
o 1.2 hours (72 minutes)
Repair D (13-16 Fasteners)
o 1.6 hours (96 minutes)
If you have already had R21BB performed on your affected buses, please complete and mail the enclosed recall yellow coversheet to us in the enclosed postage paid pink reply envelope so we may update our recall records. Be sure the reply sheet is filled out properly.
Please contact your local Blue Bird Dealer with any questions regarding this recall campaign.
Thank you for your prompt attention to this matter.
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
R21BB
IMPORTANT SAFETY RECALL NOTICE
NHTSA Campaign Number: 21V-070 (School Bus)
DATE: April 9, 2021
SUBJECT: R21BB – FMVSS 210 Noncompliance: Installation of Seats with 3-Point Belts with Floor Tracks
Dear Blue Bird Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
This important safety recall notice applies to your bus(es) identified by both Blue Bird Body Number and Vehicle Identification Number (VIN) on the enclosed yellow cover sheet. If you no longer own the subject bus(es), please complete the appropriate section of the yellow cover sheet and return to Blue Bird in the enclosed pink postage prepaid envelope.
Blue Bird Body Company is voluntarily recalling the following:
Certain model year 2019 to 2022 Blue Bird Vision School Buses
o manufactured from January 15, 2019 through January 26, 2021
Certain model year 2020 to 2022 All American School Buses
o manufactured from February 8, 2019 through December 18, 2020
On the subject buses, it has been determined that certain Blue Bird buses could fail to conform to the Federal Motor Vehicle Safety Standard Number 210, Seat Belt Anchorages.
Blue Bird shall conduct a voluntary safety recall to correct this noncompliance. The seat installation on subject buses must be inspected and corrected according to the Blue Bird recall instructions, if found to be installed incorrectly. Blue Bird evaluated the risk to motor vehicle safety related to this noncompliance and determined that, in the event of an accident, there is an increased risk of injury in a crash to the occupant if these 3-point seat belt seats are installed incorrectly.
Corrective Action:
To correct this noncompliance, Blue Bird will notify the affected owners and will provide inspection instructions and repair instructions. Visual inspection will be required to ensure that the proper seat hardware is installed. If any components are missing, the necessary seat hardware will need to be installed according to the Blue Bird recall instructions. You may request parts at campaignparts@blue-bird.com Parts will be available April 16, 2021.
Labor Reimbursement:
Blue Bird will reimburse the labor cost of potential repairs relating to this recall at no cost to you the vehicle owner. Repair Options and allowable labor times for this campaign are one of the outlined as follows:
Repair A (1-4 Fasteners)
o 0.4 hours (24 minutes)
Repair B (5-8 Fasteners)
o 0.8 hours (48 minutes)
Repair C (9-12 Fasteners)
o 1.2 hours (72 minutes)
Repair D (13-16 Fasteners)
o 1.6 hours (96 minutes)
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
Blue Bird Body Company R21BB
Page 2
Administering the Recall:
Blue Bird recommends that you contact your local or nearest Blue Bird Dealer to arrange for this recall to be performed. The Dealer can perform the repairs, or arrange for repairs to be performed by a service repair facility authorized by the Dealer. However, you may elect to perform this recall yourself or pay another independent repair facility to perform this recall. A qualified technician should perform this recall. If you elect to perform this recall yourself or pay another independent repair facility to perform this recall, complete and submit the Pink Owner’s Recall Reply Sheet provided. The Recall Reply Sheet includes a section for the owner to request reimbursement of the owner’s labor or to request reimbursement for a labor invoice paid by the owner to an independent repair facility.
Parts to complete Recall R21BB will be available April 16, 2021.
Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
If the modifications directed by this notification were performed on your bus prior to the receipt of this recall notification, attach a copy of the work order/invoice. Mail the documents in the pink self-addressed postage prepaid envelope included with the pink reply sheet to Blue Bird for warranty consideration. Reimbursements will be made in accordance with the requirements of the National Highway Transportation Safety Act, Title 49 Code of Federal Regulations, Parts 573 and 577.
Please contact your local Blue Bird Dealer with any questions regarding this recall campaign.
If Blue Bird Body Company should fail to or is unable to remedy this condition without charge to you, you may contact:
ADMINISTRATOR
NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION
1200 NEW JERSEY AVENUE, SE
WASHINGTON, D.C. 20590
Or, you may call The National Highway Traffic Safety Administration toll free at:
1-888-327-4236 TTY 1-800-424-9153 or go to: http:/www.safercar.gov
1
RECALL R21BB – Installation of Floor Tracks with 3-Point Seats
Models Affected: Certain 2019 – 2022 model year busses with 39” or 45”, 3-point seats installed on longitudinal floor track
Issue: On some affected buses, fasteners used to secure the floor track may be missing reinforcement plates, resulting in a non-compliance with FMVSS 210, Seat Belt Assembly Anchorages
Corrective Action: Inspect each floor track joint for correct fastener installation, install new fastener(s) if necessary.
WARNING: Always follow all Federal, State, Local and Shop safety standards and use proper safety equipment, and thoroughly read and understand all instructions before performing these procedures.
Park bus on level surface, apply parking brake, turn off ignition key, and chock wheels.
NOTE: This procedure outlines the process for one section of floor track. This process must be followed for every section or joint of floor track installed in the bus.
Inspection Instructions:
Locate the beginning and ending point of the floor track. Located within 1” of the ends of the floor track (item 1) will be capscrews (item 3). From the underside of the unit, inspect for installation of reinforcement plate (item 5), reference illustration 1.
NOTE: Capscrews, nuts and plates are installed within 1” from each end of the track or at a track joint. Magnabulb rivets (item 2) are installed on 2” centers in all other positions
If fasteners are installed per illustration, no further work is required. Place bus back into service.
If fasteners are not installed per illustration, proceed to repair instructions.
Repair Instructions:
1. At each end of the floor track (item 1), locate and remove the existing allen head screw (item 3) and nut (item 4). These may be discarded
2. Install new allen screw (item 3), plate (item 5), and nut (item 4) per illustration 1 and torqued to 8-10 FT – LBS
NOTE: When capscrew location falls out on top of an auxiliary crossmember use 4” capscrew 01666106
Items Needed:
Item
Part Number
Name
Quantity Required
1
10039024
Track, Aluminum
Reference only
2
00106565
Fastener, Huck, .31 Blind, Magnabulb
Reference only
3
01467323
01666106
Screw, Allen Head, ¼-20 x 1.5, Countersunk, Flathead
Capscrew, Flathead, ¼-20 x 4 (required thru Aux Crossmember)
As Needed
4
00659979
Nut, Hex, Flange, Ser, ¼-20, Black Zinc
As Needed
5
01726389
Plate, Underfloor
As Needed
Illustration 1
*******************************************************************************************************
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
R21BB
FINAL NOTICE
DATE: September 14, 2021
TO: Blue Bird Owners
Subject: R21BB – FMVSS 210 Noncompliance: Installation of Seats with 3-Point Belts with Floor Tracks
According to our records, Campaigns Administration has not received confirmation that the above referenced recall, dated April 9, 2021, has been completed. A copy of Recall R21BB is attached. Your buses affected by Recall R21BB are identified by Blue Bird body number and VIN under Section 2 on the enclosed cover sheet.
If this is the first time you received notification of Recall R21BB, please read the enclosed notification carefully. Recall R21BB must be completed, as soon as possible. To correct this noncompliance, Blue Bird will notify the affected owners and will provide inspection instructions and repair instructions. Visual inspection will be required to ensure that the proper seat hardware is installed. If any components are missing, the necessary seat hardware will need to be installed according to the Blue Bird recall instructions. You may request parts at campaignparts@blue-bird.com
Labor Reimbursement:
Repair Options and allowable labor times for this campaign are one of the outlined as follows:
Repair A (1-4 Fasteners)
o 0.4 hours (24 minutes)
Repair B (5-8 Fasteners)
o 0.8 hours (48 minutes)
Repair C (9-12 Fasteners)
o 1.2 hours (72 minutes)
Repair D (13-16 Fasteners)
o 1.6 hours (96 minutes)
If you have already had R21BB performed on your affected buses, please complete and mail the enclosed recall yellow coversheet to us in the enclosed postage paid pink reply envelope so we may update our recall records. Be sure the reply sheet is filled out properly.
Please contact your local Blue Bird Dealer with any questions regarding this recall campaign.
Thank you for your prompt attention to this matter.
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
R21BB
IMPORTANT SAFETY RECALL NOTICE
NHTSA Campaign Number: 21V-070 (School Bus)
DATE: April 9, 2021
SUBJECT: R21BB – FMVSS 210 Noncompliance: Installation of Seats with 3-Point Belts with Floor Tracks
Dear Blue Bird Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
This important safety recall notice applies to your bus(es) identified by both Blue Bird Body Number and Vehicle Identification Number (VIN) on the enclosed yellow cover sheet. If you no longer own the subject bus(es), please complete the appropriate section of the yellow cover sheet and return to Blue Bird in the enclosed pink postage prepaid envelope.
Blue Bird Body Company is voluntarily recalling the following:
Certain model year 2019 to 2022 Blue Bird Vision School Buses
o manufactured from January 15, 2019 through January 26, 2021
Certain model year 2020 to 2022 All American School Buses
o manufactured from February 8, 2019 through December 18, 2020
On the subject buses, it has been determined that certain Blue Bird buses could fail to conform to the Federal Motor Vehicle Safety Standard Number 210, Seat Belt Anchorages.
Blue Bird shall conduct a voluntary safety recall to correct this noncompliance. The seat installation on subject buses must be inspected and corrected according to the Blue Bird recall instructions, if found to be installed incorrectly. Blue Bird evaluated the risk to motor vehicle safety related to this noncompliance and determined that, in the event of an accident, there is an increased risk of injury in a crash to the occupant if these 3-point seat belt seats are installed incorrectly.
Corrective Action:
To correct this noncompliance, Blue Bird will notify the affected owners and will provide inspection instructions and repair instructions. Visual inspection will be required to ensure that the proper seat hardware is installed. If any components are missing, the necessary seat hardware will need to be installed according to the Blue Bird recall instructions. You may request parts at campaignparts@blue-bird.com Parts will be available April 16, 2021.
Labor Reimbursement:
Blue Bird will reimburse the labor cost of potential repairs relating to this recall at no cost to you the vehicle owner. Repair Options and allowable labor times for this campaign are one of the outlined as follows:
Repair A (1-4 Fasteners)
o 0.4 hours (24 minutes)
Repair B (5-8 Fasteners)
o 0.8 hours (48 minutes)
Repair C (9-12 Fasteners)
o 1.2 hours (72 minutes)
Repair D (13-16 Fasteners)
o 1.6 hours (96 minutes)
BLUE BIRD BODY COMPANY
3920 Arkwright Road, Suite 200, Macon, GA 31210 – (478) 825-2021
Blue Bird Body Company R21BB
Page 2
Administering the Recall:
Blue Bird recommends that you contact your local or nearest Blue Bird Dealer to arrange for this recall to be performed. The Dealer can perform the repairs, or arrange for repairs to be performed by a service repair facility authorized by the Dealer. However, you may elect to perform this recall yourself or pay another independent repair facility to perform this recall. A qualified technician should perform this recall. If you elect to perform this recall yourself or pay another independent repair facility to perform this recall, complete and submit the Pink Owner’s Recall Reply Sheet provided. The Recall Reply Sheet includes a section for the owner to request reimbursement of the owner’s labor or to request reimbursement for a labor invoice paid by the owner to an independent repair facility.
Parts to complete Recall R21BB will be available April 16, 2021.
Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
If the modifications directed by this notification were performed on your bus prior to the receipt of this recall notification, attach a copy of the work order/invoice. Mail the documents in the pink self-addressed postage prepaid envelope included with the pink reply sheet to Blue Bird for warranty consideration. Reimbursements will be made in accordance with the requirements of the National Highway Transportation Safety Act, Title 49 Code of Federal Regulations, Parts 573 and 577.
Please contact your local Blue Bird Dealer with any questions regarding this recall campaign.
If Blue Bird Body Company should fail to or is unable to remedy this condition without charge to you, you may contact:
ADMINISTRATOR
NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION
1200 NEW JERSEY AVENUE, SE
WASHINGTON, D.C. 20590
Or, you may call The National Highway Traffic Safety Administration toll free at:
1-888-327-4236 TTY 1-800-424-9153 or go to: http:/www.safercar.gov
1
RECALL R21BB – Installation of Floor Tracks with 3-Point Seats
Models Affected: Certain 2019 – 2022 model year busses with 39” or 45”, 3-point seats installed on longitudinal floor track
Issue: On some affected buses, fasteners used to secure the floor track may be missing reinforcement plates, resulting in a non-compliance with FMVSS 210, Seat Belt Assembly Anchorages
Corrective Action: Inspect each floor track joint for correct fastener installation, install new fastener(s) if necessary.
WARNING: Always follow all Federal, State, Local and Shop safety standards and use proper safety equipment, and thoroughly read and understand all instructions before performing these procedures.
Park bus on level surface, apply parking brake, turn off ignition key, and chock wheels.
NOTE: This procedure outlines the process for one section of floor track. This process must be followed for every section or joint of floor track installed in the bus.
Inspection Instructions:
Locate the beginning and ending point of the floor track. Located within 1” of the ends of the floor track (item 1) will be capscrews (item 3). From the underside of the unit, inspect for installation of reinforcement plate (item 5), reference illustration 1.
NOTE: Capscrews, nuts and plates are installed within 1” from each end of the track or at a track joint. Magnabulb rivets (item 2) are installed on 2” centers in all other positions
If fasteners are installed per illustration, no further work is required. Place bus back into service.
If fasteners are not installed per illustration, proceed to repair instructions.
Repair Instructions:
1. At each end of the floor track (item 1), locate and remove the existing allen head screw (item 3) and nut (item 4). These may be discarded
2. Install new allen screw (item 3), plate (item 5), and nut (item 4) per illustration 1 and torqued to 8-10 FT – LBS
NOTE: When capscrew location falls out on top of an auxiliary crossmember use 4” capscrew 01666106
Items Needed:
Item
Part Number
Name
Quantity Required
1
10039024
Track, Aluminum
Reference only
2
00106565
Fastener, Huck, .31 Blind, Magnabulb
Reference only
3
01467323
01666106
Screw, Allen Head, ¼-20 x 1.5, Countersunk, Flathead
Capscrew, Flathead, ¼-20 x 4 (required thru Aux Crossmember)
As Needed
4
00659979
Nut, Hex, Flange, Ser, ¼-20, Black Zinc
As Needed
5
01726389
Plate, Underfloor
As Needed
Illustration 1
SEOCONTENT-END
6 Affected Products
Vehicles
MAKE | MODEL | YEAR |
BLUE BIRD | ALL AMERICAN | 2020-2022 |
BLUE BIRD | VISION | 2020-2022 |
12 Associated Documents
Recall Quarterly Report #1, 2021-2
RCLQRT-21V070-7705.PDF 211.141KB
Recall Acknowledgement
RCAK-21V070-4937.pdf 645.751KB
Noncompliance Notice 573 Report
RCLRPT-21V070-7290.PDF 215.936KB
Recall 573 Report- Amendment 1
RCLRPT-21V070-9149.PDF 215.938KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V070-3968.pdf 803.24KB
Manufacturer Notices(to Dealers,etc)
RCMN-21V070-6121.pdf 859.681KB
Remedy Instructions and TSB
RCRIT-21V070-1483.pdf 456.49KB
Recall 573 Report- Amendment 2
RCLRPT-21V070-4596.PDF 215.942KB
ISSUED Renotification Notice
RCRN-21V070-4471.pdf 1880.809KB
Recall Quarterly Report #2, 2021-3
RCLQRT-21V070-9843.PDF 211.237KB
Recall Quarterly Report #3, 2021-4
RCLQRT-21V070-6729.PDF 211.325KB
ISSUED Renotification Notice
RCRN-21V070-6685.pdf 1880.808KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V070&docType=RCL
- 【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- 2024 Top Choice for ABS Bleeder Scan Tool - Is the brake pedal always slowly sinking down or becoming loose? This ABS brake bleeding scan tool will cycle the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with ABS auto bleed. By following the instruction step by step, even a beginner can navigate through easily. Coverage check before purchasing via FOXWELL official site: Support- Diagnostic Coverage List. Tip: It won’t work on vehicles lacking an auto bleed function.
- More Than a Entry Level OBD2 Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD-II diagnostics to the next level by customizing functions for ABS and SRS system. This SRS and ABS scanner provides in-depth insights on error code diagnosis, wheel speed sensor, airbag circuits, cable connectors monitor, etc... Note: This scanner DOES NOT work on Airbag crash data/programming issues.
- No More Higher End Service than You Need - One NT630 Plus is enough! This obd2 scanner with ABS and SRS takes in-depth diagnosis on Anti-Lock Brake System & SRS/Airbag, and also performs Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset daily reset services. These issues will be restored after the car faults repaired. Note: Some classic vehicles without the electronic control system can not support the reset service.
- Also can Work like NT301 - The NT630 Plus ABS code reader can connect to the OBD-II port directly. It will diagnose all OBD-II modules instantly, displays the live data, locates bad sensors and indicate I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
- Higher-level Services wih Lower Cost - Cost less to own a ABS SRS Bidirectional Scan Tool that is not found on similar code readers & scan tools. This car diagnostic scanner allows you to test all potential car faults in the ABS/Airbag system, with functions returning to normal once you exit the program. Please note, that only ABS/SRS modules are supported.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor, and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
- 🔥【Easy to use and friendly】+【Faster diagnostic speed】 FOXWELL NT604 is the 2024 newest enhanced 4 system code reader, which is capable of reading/clearing fault codes, retrieving vehicle information and displaying 4-in-1 live data stream. You will easily find what's wrong with your car to avoid expensive trip to dealership. At the same time, this car scanner will directly tell you what the corresponding code means, avoiding the hassle of searching for information.
- 🛠【OBD2 Full Function】+【Check Engine/ABS/SRS/Transmission】 This scan tool will allow you to perform full OBDII diagnostic for all cars with OBDII protocols. You can use it to check if your car is ready for annual testing through the I/M Readiness menu. In addition, the device also has value-added functions such as real-time data flow, DTC Lookup, data playback, and printing. Turn off Check Engine/ABS/SRS/Transmission Light. Tips: the fault code can be only erased after the problem is fixed.
- 🚗【Cover 10000+ models &60+ Car Makes】 and 【AUTOVIN】 Compared with Other scanner which only supports 40 car makes, NT604 car diagnostic scanner for all cars contains more than 60 car brands and 10000+ cars for almost all OBDII cars sold worldwide like passenger car, SUVs, minivans, light-duty trucks, etc. produced by Asian, European, American with the supported year differing from 1996 to 2024. It allows you to get your VIN and vehicle info rapidly, no need to take time input one by one.
- 🛒【Battery Voltage Checker】+【Lifetime Free Update, No Subscription fee 】 It monitors the real-time voltage of the vehicle battery and displays it in graphical and textual form, informing you of the health status of the battery. Also monitor the health of your car. NT604 is equipped with the latest software directly, so you don't need to download a bunch of updated software after unboxing to use it. Lifetime no subscription fee for upgrading software.
- 🎁【Great festival Idea:Applicable for Many People】+【High End and Exquisite Protective Packaging】 Best one item for Dad, Husband, Boyfriend, Handy Men. Every car owner will need a 4 systems diagnostic scan tool! This code reader fits for home mechanic, DIY car owners, advanced hobbyiest, car dealer, auto repair shop, automotive engineer, diagnostic tech, automobile tech, individual. Apparently, this is the most economical scan tool for every mechanic.
- 💻Note: (About UPDATE) ANCEL FX2000 car scanner diasgnostic tool can be used directly as it comes with existed software, You don't need to register or update beforethe first use. It's recommended to update your scanner with SD card only when it fails to work on your car, or it's slow to load all menus or if you need newer software version. 📢Software update supports WIN XP, 7, 8, 10 operation systems only, but not for Mac and ios system. 📧Any concerns, pls feel free to 𝙚-𝙢𝙖𝙞𝙡 us via 𝙖𝙢𝙖𝙯𝙤𝙣 @ 𝙖𝙣𝙘𝙚𝙡𝙩𝙚𝙘𝙝. 𝙘𝙤𝙢.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 automotive scanner diagnostic tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use this obd2 scanner with abs and srs to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 OBD2 scanner diagnostic tool also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【A/T TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the A/T transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. This transmission scanner provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 obd2 scanner with abs and srs is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
- SRS Airbag Light Reset Tool - D800 OBD scan tool is design for BMW. The B800 diagnostic scanner ONLY work for BMW's E36/E46/E34/E38/E39/Z3/X5/X3 will allow you to read airbag trouble codes on BMW's
- Compatible - Models available for most BMWs built between 1994 and 2003 like ALL variants in E36/E46/E34/E38/E39/Z3/Z4/X5. But it doesn't work with 2001 BMW 330i.
- High Effective - Reset the dashboard SRS airbag light within seconds. This is a very easy to use tool that comes with instruction manual to help you diagnose problems
- Easy to Use - And clear the code by the enter button; confirms a selection of a menu list or return to the main menu; scrolls through menu items or cancel and operation by the scroll button
- Easy to Understood - With LCD display, it can show the test results and control it by the buttons. Provide 1-year warranty, if you have any issue please contact us with Order ID asap and we will try our best to help you. 🙂
- The VD500 OBD2 scanner is specifically designed to diagnose Volkswagen Group (Fits for VW/Audi/Skoda/ SEAT) 12-volt 16-pin vehicles, but can also be used with other 12-volt (non-Volkswagen) and light trucks (non-electric) vehicles manufactured in 1996 or later that are OBD II -compliant with standard 16-pin OBD II protocols (J1850 VPM, J1850PWM, ISO9141, KWP 2000 and CAN). Please send your vehicle information to our 💌amazon@anceltech.com💌 to check compatibility.
- For Volkswagen (VAG) vehicles diagnostics, the device can not only read and clear codes on engine, ABS, transmission, SAS (not all cars), ESP, TPMS and other systems, but also reset the oil, brake pad and throttle position adaption.
- For other OBD II vehicles (non-Volkswagen), the VD500 can read and clear fault codes, display fault code definitions, turn off the CEL (check engine light) and retrieve VIN information ONLY.
- The VD500 diagnostic offering for Volkswagen vehicles covers the following vehicles: fits for VW (CC, EOS, Golf, GTI, Jetta, Passat, Phaeton, Polo, Rabbit, Sharan, Tiguan, Touran, Touareg); fits for Audi (A3, A4, A6, A7, A8, A5, Q3, Q5, Q7, R8, RS3, TT, RS, RS5, S4, S6); fits for Skoda (Octavia, Rapid, Yeti, Kodiaq, Fabio, Superb); fits for SEAT (Leon, Ateca, Ibiza, Altea, Cushion, Cord, Alhambra) Diagnostics.
- With English and German as display languages, this diagnostic scan tool provides life-time free software updates to fix the latest bugs or add new parameters. Simply download the software from the official website, then follow on-screen instructions to install it.
- 【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! Also, the lifetime f-ree update is provided for more vehicle coverage, bug fixes. SAVE AT LEAST $1000+ PER YEAR!Get LAUNCH CRP123 Elite car diagnostic scanner and give your lover a surprise!🎁Get the Extra Gifts :Protective Case Storage Bag,please reach us at: cardiag-aftersales @ hotmail.com.
- 【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- 【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and V-ehicle Information, O2 Sensor Test, EVAP Test of F-uel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 obd2 scanner can not only reveal what error codes your car is producing, but also erase your v-ehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- 【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.Large size Color Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
- 【 Find Your Vehicles Here】Launch CRP123 obd2 scanner Supports mainstream vehicles on the world,fit for ACURA VW AUDI AUST FORD BENZ BMW CHRYSLER FIAT GM HOLDEN HONDA HYUNDAI INFINITI JAGUAR ISUZU KIA LANDROVER LEXUS MAZDA MITSUBISHI NISSAN OPEL PORSCHE SAAB SEAT SKODA SMART MERCEDES SPRINTER SUBARU SUZUKI SCION TOYOTA USA FORD VOLVO PEUGEOT CITROEN RENAULT EUROFORD.Etc.
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix] - Much more than a car code reader, BlueDriver is a diagnostic tool. Get unlimited specific repair reports containing possible causes, reported fixes, and more for virtually every vehicle make and model.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
Last update on 2024-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.