21-394 – Improperly Tightened Axle U-Bolts – 2021 Crossroads Redwood Recreational Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

January 20, 2021 NHTSA CAMPAIGN NUMBER: 21V015000

Improperly Tightened Axle U-Bolts

If the axle moves, poor vehicle handling may result, increasing the risk of a crash.

 

NHTSA Campaign Number: 21V015

Manufacturer Keystone RV Company

Components SUSPENSION

Potential Number of Units Affected 209

 

Summary

Keystone RV Company (Keystone) is recalling certain 2021 Crossroads Redwood 3401RL, 3901MB, 3901WB, 3911RL, 3951MB, 3951WB, 3981FK, 3991RD, 4001LK, 4150RD recreational trailers, built on D80 Dexter Axles. The U-bolts on these axles may have been improperly torqued, causing the bolts to loosen and the axle to slide.

 

Remedy

Keystone will notify owners, and dealers will properly tighten the U-bolts, free of charge. The recall began February 8, 2021. Owners may contact Keystone customer service at 1-866-425-4369. Keystone’s number for this recall is 21-394.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 



1 Affected Product

Vehicle

MAKE MODEL YEAR
KEYSTONE CROSSROADS REDWOOD 2021

 


12 Associated Documents

Manufacturer Notices(to Dealers,etc)

RCMN-21V015-8585.pdf 119.165KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [116.37 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-21V015-6558.pdf 92.865KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [90.69 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-21V015-3061.pdf 95.585KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [93.34 KB]

 


Miscellaneous Document – 21-394 Redwood Dexter 8K Axles – Web

RMISC-21V015-0673.pdf 52.96KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [51.72 KB]

 


Miscellaneous Document – 21-394 tweet screenshot

RMISC-21V015-7650.pdf 14.31KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [13.97 KB]

 


Recall Quarterly Report #1, 2021-1

RCLQRT-21V015-8852.PDF 211.128KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.18 KB]

 


Recall Quarterly Report #2, 2021-2

RCLQRT-21V015-5973.PDF 211.231KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.28 KB]

 


Remedy Instructions and TSB

RCRIT-21V015-1624.pdf 270.345KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [264.01 KB]

 


Recall Acknowledgement

RCAK-21V015-9735.pdf 244.867KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.13 KB]

 


Defect Notice 573 Report

RCLRPT-21V015-6241.PDF 215.288KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.24 KB]

 


Recall Quarterly Report #3, 2021-3

RCLQRT-21V015-4278.PDF 211.314KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.36 KB]

 


Recall Quarterly Report #4, 2021-4

RCLQRT-21V015-1775.PDF 211.426KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.47 KB]

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V015&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
The Trailer Parts Outlet - 3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 61/46 Hubface/Spring Center - (4'0) Frame Width / 5x4.5 Bolt Pattern
  • Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • High Strength Straight Steel Axle Tube
  • Axle comes fully assembled, so all you'll have to do is attach the springs, the U-bolt kits, and the tire and wheel assemblies.
  • Underslung - Spring seats are welded to the bottom of the axle, which allows for a lower ride height.
  • Trailer Axle Design for use on Light Duty Trailers
Bestseller No. 2
The Trailer Parts Outlet - 2k TK Trailer Axle - 2000 lb Idler, 61/46 Hubface/Spring Center - (4'0) Frame Width / 4x4 Bolt Pattern
  • EZ Lube Design Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting Grease your axle without pulling off your whole entire hub
  • Internal Wiring System To ensure seamless design Protect brake wires from wear and tear
  • High Strength Straight Steel Axle Tube Construction to ensure Even Tire Wear A better highway experience
  • Underslung - Axle is welded with spring seats on the bottom Allows for lower ride height For optimal usage, use with double eye springs
Bestseller No. 3
LCI Lippert 3,500LB Straight Idler Trailer Axle 72HF 58SC
  • 72" from Hubface to Hubface and 58" Spring Center to Spring Center.
  • Springs are 25 1/4" long and 1 3/4" wide
  • 4 Leaf Springs
  • 2-3/8" Main Tube
  • 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs.
Bestseller No. 4
The Trailer Parts Outlet - 2k TK Trailer Axle - 2000 lb Idler, 71/58 Hubface/Spring Center - (5'0) Frame Width / 5x4.5 Bolt Pattern
  • Capacity: 2000 lbs, Tube:1-3/4 | 5x4.5 Bolt Pattern
  • EZ Lube Design: Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
  • Internal Wiring System: To ensure seamless design and protect brake wires from wear and tear.
  • High Strength Straight Steel Axle Tube Construction: To ensure even tire wear and a better highway experience.
  • Underslung - Axle is welded with spring seats on the bottom: Allows for lower ride height. For optimal usage, use with double eye springs.
Bestseller No. 5
TK Axles + 3.5k-3500 Lb Capacity Trailer Idler Straight Axle - 5 on 4.5 Bolt Pattern (Assembled Idler Axle, 73" Hubface-58 Spring Center(5'0Frame))
  • Completely DEXTER Compatible; Half the Price
  • Capacity: 3500 lbs
  • Option to Add Spring and Ubolt Kits Needed to Hang Your Axle
  • Tube: 2 3/8"; EZ Lube Design
  • Underslung: Axle is welded with Spring Seats on the Bottom
Bestseller No. 6
The Trailer Parts Outlet - 3.5k TK Trailer Axle - (3500 lb Beam Only), 95/80 Hubface/Spring Center - (6'10) Frame Width for Utility/ATV/Boat/Cargo
  • Versatile Design - Compatible for use on Medium Duty Trailers Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Flatbed, Livestock, Cargo, Enclosed, RV Trailers, Dump, Lowboy, Flatbed Trailers and more
  • EZ Lube design for effortless maintenance - grease your axle without removing the whole hub assembly
  • Underslung - Our trailer axle beam is welded with spring seats on the bottom Allows for lower ride height, for optimal usage, use with double eye springs
  • High-Strength Construction - Made with straight steel axle tube to ensure even tire wear and a better highway experience
  • Easy Installation - Simply pair with double eye springs for optimal usage and get your trailer back on the road in no time
Bestseller No. 7
The Trailer Parts Outlet - 3.5k TK Trailer Axle - 3500 lb Idler 5 Lug - Dexter Compatible, 89/74 Hubface/Spring Center - (6'4) Frame Width / 5x5 Bolt Pattern
  • Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
  • High Strength Straight Steel Axle Tube
  • Axle comes fully assembled, so all you'll have to do is attach the springs, the U-bolt kits, and the tire and wheel assemblies.
  • Underslung - Spring seats are welded to the bottom of the axle, which allows for a lower ride height.
  • Trailer Axle Design for use on Light Duty Trailers
Bestseller No. 8
RIGID HITCH INCORPORATED 2,000 lb. Torsional Stub Axles with 5-Bolt on 4-1/2 Inch Hubs (TSA-20150)
  • 2,000 lbs capacity
  • Stub axles can be bolted (hardware not included) or welded to trailer frame
  • 45 degree downward starting angle
  • Perfect item to easily build your own custom motorcycle trailer
  • Read product description below for more detailed information.
Bestseller No. 9
The Trailer Parts Outlet - 6k TK Trailer Axle - 6000 lb Idler 6 Lug, 85/70 Hubface/Spring Center - (6'0) Frame Width / 6x5.5 Bolt Pattern
  • 6,000 lbs TK Trailer Axle (6K Capacity), Tube: 3", Bolt Pattern: 6x5.5
  • Axles come fully assembled - Packed with High-Temp Axle Grease
  • High Strength Steel Axle Tube Construction to ensure
  • Designed for use on Light Duty Trailers
Bestseller No. 10
LCI Lippert 3,500LB Straight Idler Trailer Axle 60HF 48SC
  • 60" from Hubface to Hubface and 48" Spring Center to Spring Center.
  • Springs are 25 1/4" long and 1 3/4" wide.
  • 4 Leaf Springs
  • 2-3/8" Main Tube
  • 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs.

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...