| “This site contains affiliate links for which OEMDTC may be compensated” |
December 21, 2020 NHTSA CAMPAIGN NUMBER: 20V802000
Air in the brake system can result in extended brake pedal travel, increasing the risk of a crash.
NHTSA Campaign Number: 20V802
Manufacturer Daimler Vans USA, LLC
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 9,094
Summary
Daimler Vans USA, LLC (DVUSA) is recalling certain 2019-2020 Mercedes-Benz Sprinter and Freightliner Sprinter vehicles equipped with electric parking brakes. The rear brake calipers may leak brake fluid into the housing of the electric parking brake connected to the rear axle service brake system, allowing air to enter the hydraulic brake system.
Remedy
DVUSA has not yet established a remedy. DVUSA issued owners an interim notification on January 21, 2021. The remedy is expected to be available in December 2021. Owners may contact DVUSA customer service at 1-877-762-8267. DVUSA’s number for this recall is VS3BREPB.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Vans Recalls
| TO: Mercedes-Benz Principals, Freightliner Principals, General Managers, Sales Managers, Service Managers, Parts Managers | FROM: Anthony Washington, Department Manager, Regulations and Certifications |
| Re: Initial Recall Campaign Notification Model 907 (Sprinter) Model Years 2019-2020 Rear Axle Brake Caliper |
DATE: December 21, 2020 |
IMPORTANT RECALL CAMPAIGN INFORMATION
Please see the attached documents related to the campaign listed above
| Campaign No. : | Campaign Desc. : | Rear Axle Brake Caliper | |
| 2020120019 | PDGBREPB | ||
| This is to notify you of an upcoming Recall Campaign concerning the rear axle brake calipers on approximately 9,094 MY19-20 Mercedes-Benz & Freightliner Sprinter vans. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. All affected VINs will be flagged as “Pending” in VMI. | |||
| Background | |||
| Issue | Mercedes-Benz AG (“MBAG”), the manufacturer of Mercedes-Benz and Freightliner vans, has determined that on certain Sprinter vehicles from platform 907 (VS30) equipped with an electrical parking brake (EPB), if the EPB is used frequently, then over time, the brake caliper of the rear axle may leak brake fluid into the housing of the electric parking brake that is connected to the rear axle service brake system. This could allow air to enter the hydraulic brake system which could lead to extended brake pedal travel and a changed brake pedal feel. If the condition is not addressed, the risk of a crash could increase. | ||
| What We’re Doing | MBUSA/DVUSA is conducting a voluntary recall. MBAG is currently working on developing a final technical remedy. For this purpose, various development and production optimization measures are currently being implemented with the supplier. | ||
| Parts | Parts are still being verified.
An additional notification will be sent when parts are available for repair. |
||
| Vehicles Affected | |||
| Vehicle Model Year(s) | Model Year 2019-2020 | ||
| Vehicle Model | Sprinter, VS30, Platform 907 | ||
| Vehicle Populations | |||
| Total Recall | 9,094 | ||
| Dealer Inventory | 740 | ||
| Given this notice, it is a violation of Federal Law for a dealer to sell or lease any new Sprinter vehicles in dealer inventory covered by this notification until the vehicle has been repaired.
Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired.
Additionally, given this notice, it is a violation of Federal Law for rental companies to rent new Sprinter vehicles covered by this notification until the vehicle has been repaired.
|
|||
| Next Steps/Notes | |||
| Customer Notification Timeline | An owner notification letter will be mailed in early February 2021. | ||
| AOMS/SOMS | AOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP. | ||
| Rental Fleet Partners | This recall may affect vehicles in your fleet. Please contact your respective MBUSA/DVUSA fleet representative for further information and next steps. For repairs, please contact your preferred MBUSA/DVUSA dealer. | ||
| While we regret any inconvenience this may cause, we are determined to maintain a high level of vehicle quality and customer satisfaction. | |||
| TO: Freightliner Principals, General Managers, Sales Managers, Service Managers, Parts Managers | FROM: Anthony Washington, Department Manager, Regulations and Certifications |
| Re: Recall Campaign Launch Notification Model 907 (Sprinter) Model Years 2019-2020 Replace Rear Axle Brake Calipers |
DATE: December, 2021 |
IMPORTANT RECALL CAMPAIGN INFORMATION
Please see the attached documents related to the campaign listed above
| Campaign No. : | Campaign Desc. : | Replace Rear Axle Brake Calipers | |
| 2021030006 | VS3BREPB | ||
| This is to notify you of the Recall Campaign launch to replace the rear axle brake calipers on approximately 113 MY20 Freightliner Sprinter vans. The recall campaign will be visible on the www.safercar.gov website and may generate questions from customers. All affected VINs will be flagged as “OPEN” in VMI. | |||
| Background | |||
| Issue | Mercedes-Benz AG (“MBAG”), the manufacturer of Freightliner Sprinter Vans, has determined that on certain Sprinter vehicles from platform 907 (VS30) equipped with an electric parking brake (EPB), if the EPB is used frequently, then over time, the rear axle brake caliper may leak brake fluid into the EPB housing that is connected to the rear axle service brake system. This could allow air to enter the hydraulic brake system which could lead to extended brake pedal travel and a different brake pedal feel.
If the condition is not addressed, the risk of a crash could increase. |
||
| What We’re Doing | DVUSA is conducting a voluntary recall. An Authorized Freightliner dealer will replace the rear brake calipers. | ||
| Parts | Parts are available. | ||
| Vehicles Affected | |||
| Vehicle Model Year(s) | Model Year 2019-2020 | ||
| Vehicle Model | Sprinter, VS30, Platform 907 | ||
| Vehicle Populations | |||
| Total Recall | 113 | ||
| Dealer Inventory | 0 | ||
| Given this notice, it is a violation of Federal Law for a dealer to sell or lease any new Sprinter vehicles in dealer inventory covered by this notification until the vehicle has been repaired.
Loaner and demonstrator vehicles may continue to be driven, but must not be retailed until repaired.
Additionally, given this notice, it is a violation of Federal Law for rental companies to rent new Sprinter vehicles covered by this notification until the vehicle has been repaired.
|
|||
| Next Steps/Notes | |||
| Customer Notification Timeline | An owner notification will be mailed in January, 2022 | ||
| AOMS/SOMS | AOMs – This recall may generate questions from your dealers. Please forward this notice to your dealers ASAP. | ||
| Rental Fleet Partners | This recall may affect vehicles in your fleet. Please contact your respective DVUSA fleet representative for further information and next steps. For repairs, please contact your preferred Freightliner dealer. | ||
| While we regret any inconvenience this may cause, we are determined to maintain a high level of vehicle quality and customer satisfaction. | |||
Campaign No. 2021030006, December 2021
| TO: | ALL FREIGHTLINER CENTERS |
| SUBJECT: | Model 907 Sprinter, Model Year 2020 Electric Parking Brake Rear Brake Calipers |
Mercedes-Benz AG (“MBAG”), the manufacturer of Freightliner vans, has determined that on certain Sprinter vehicles from platform 907 (VS30) equipped with an electrical parking brake(EPB), if the EPB is used frequently, then over time, the brake caliper of the rear axle may leak brake fluid into the housing of the electric parking brake that is connected to the rear axle service brake system. This could allow air to enter the hydraulic brake system which could lead to extended brake pedal travel and a changed brake pedal feel. If the condition is not addressed, the risk of a crash could increase. DVUSA is conducting a voluntary recall. An authorized Freightliner dealer will replace the rear brake calipers.
Prior to performing this Recall Campaign:
• Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
• Please review the entire Recall Campaign bulletin and follow the repair procedure exactly as described.
Please note that Recall Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.
Approximately 113 vehicles are involved.
Order No. V-RC-2021030006
SEOCONTENT-START
IMPORTANT SAFETY RECALL INTERIM NOTICE
This notice applies to your vehicle, VIN: 123456
Rear Brake Caliper
NHTSA Recall #20V802
January, 2021
20V802
123456
Dear Valued Freightliner Sprinter Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Mercedes-Benz AG (“MBAG”), the manufacturer of Sprinter vans, has decided that a defect which relates to motor vehicle safety
exists in certain Model Year 2019 – 2020 Freightliner Sprinter vehicles. Our records indicate that your vehicle is included in the
affected population of vehicles.
MBAG has determined that the brake caliper of the rear axle may leak brake fluid into the housing of the electric parking brake
connected to the rear axle service brake system, which could lead to extended brake pedal travel and a changed brake pedal
feel. If the condition is not addressed, there might be an increased risk of a crash.
MBAG is currently working on developing a final technical remedy and therefore, the parts to remedy this issue are
currently not yet available.
We are working to obtain the necessary parts to correct this condition as quickly as possible. As the parts become available, we will
send you another letter asking you to take your vehicle to an authorized Freightliner dealer to have the recall completed free of
charge.
Should you have any concerns or questions regarding your vehicle before you receive the next recall letter when parts are
available, please contact an authorized Freightliner dealer. If for any reason a dealer is unable to remedy your situation, we
are always happy to hear from you. A vehicle identification number (VIN)-based recall lookup tool on our website offers a search
function that will indicate whether a vehicle has been subject to a safety recall, and whether that vehicle has had the free remedy
performed. Please visit www.freightlinersprinterusa.com/freightliner/owners-resources/recall and enter your 17 digit VIN in the
VIN look-up tool.
We also encourage you to sign up for recall alerts at www.nhtsa.gov/alerts.
In the event that you are no longer the vehicle owner, or have had a change of address, please complete the reverse side and
return the updated information in the enclosed envelope. If this is a leased vehicle and the lessor and registered owner receive this
notice, please forward this information by first class mail to the lessee within 10 business days to comply with Federal
Regulations.
We apologize for any inconvenience this situation may cause you.
Sincerely,
• A safety defect exists in your vehicle.
• Remedy parts are not yet available for your
vehicle.
• We will contact you again once parts are
available.
Daimler Vans USA, LLC
A Mercedes-Benz AG Company
Robert Veit
Managing Director
Vans USA
Daimler Vans USA, LLC
One Mercedes-Benz Drive
Sandy Springs, GA 30328
Phone (770) 705-0600
IMPORTANT
If for any reason YOU NO LONGER OWN THIS VEHICLE OR have a CHANGE OF ADDRESS, please COMPLETE THE SECTION
BELOW, place in the ENCLOSED ENVELOPE, and DROP IN ANY MAIL BOX. If possible, provide the name and address of the
present owner so that we may contact them.
! EXPORTED
! LEASE, VEHICLE RETURNED
! SCRAPPED
! SOLD
! STOLEN
! OTHER
! NEW OWNER INFORMATION ! MY NEW NAME OR ADDRESS IS:
Last Name, First Name
Street Apt
City State ZIP
Email Address
Phone (numbers only) Mobile (numbers only)
———————————————– ———————————————————————————-
Date Signature
VIN: 123456
*****************************************************************************************************************
Model 907, 910
with code B25 (Electric parking brake)
Operation no. of the operation texts or standard texts and flat rates
Category Op. no. Operation text Time Acc. no. Code
L 02 1250 Operations: Replace 2 brake calipers of rear axle 2.3hrs 42 960 93 VS3BREPB
L 02 1586 Operations: Extra work for removing/installing 2
wheel and tire assemblies during installation with
wheel lift dolly
0.2hrs 42 960 93 VS3BREPB
L 02 1285 Operations: Extra work for bleeding hydraulic brake
system (after repair work) on veh. with manual
transmission
0.1hr 42 960 93 VS3BREPB
L 02 1286 Operations: Perform brake test stand run 0.1hr 42 960 93 VS3BREPB
L 02 3282 Operations: Remove underfloor paneling (when
working on veh.)
0.2hrs 42 960 93 VS3BREPB
L 02 3283 Operations: Remove lower engine compartment
lining (when working on vehicle)
0.2hrs 42 960 93 VS3BREPB
D42.10-A004-79
1 Brake caliper 5 Electrical wiring harness 9 Brake hose
2 Bracket 6 Screw 10 Dust cap
3 Screw 7 Electrical connector 11 Screw
4 Electrical wiring harness 8 Actuator motor
V-RC-2021030006 1
Replace both rear-axle brake calipers, along with actuator motors of electric parking brake.
Replacement of wear or damaged parts must be invoiced separately.
aDanger Risk of death caused by vehicle
slipping or toppling off of the lifting
platform.
Align vehicle between vehicle lift
columns and position the four
support plates at the vehicle lift
support points specified by the
vehicle manufacturer.
AS00.00-Z-0010-01A
aDanger Risk of accident when
commissioning the vehicle due to
a lack of braking effect when the
service brake is operated for the
first time after repair work.
Before starting the engine, actuate
brake pedal several times until
pressure is built up and
maintained in the brake system.
AS42.50-Z-0002-01A
aWarning Risk of injury. Skin or eye injuries
may result when handling hot or
glowing objects.
Wear protective gloves, protective
clothing and safety glasses, if
necessary.
AS00.00-Z-0002-01A
aCaution Risk of poisoning from
swallowing brake fluid. Risk of
injury from skin and eye contact
with brake fluid
Only pour brake fluid into suitable
and appropriately marked
containers. Wear protective
clothing and eye protection when
handling brake fluid.
AS42.50-Z-0001-01A
Topical note Information on preventing damage
to electronic components due to
electrostatic discharge
AH54.00-P-0001-01A
Topical note Notes on repairs to brake system AH42.00-P-0003-01A
Topical note Brake fluid notes AH42.50-P-0001-01A
Topical note Notes on self-locking nuts and
bolts
AH00.00-N-0001-01A
Topical note Notes on bleeding brake system AH42.10-N-0002-01A
Topical note Notes on carrying out repair work
in the vehicle interior
AH68.00-N-0001-01S
g Check
1 Check, whether the vehicle is
affected by the measure.
SM42.10-D-0046-01AAA
SM42.10-D-0046-01AAB
Affected vehicles: Replace brake
calipers on rear axle (code:
VS3BREPB, acc. no.: 42 960 93)
Model 907.### ## as of 000025 up
to 322015
i
For authorized Mercedes‑Benz
service partners, only the entry in
the Extended VEGA Application
(EVA) system, in the “Current” tab,
is decisive. An additional test of the
affected vehicles in the workshop
information system (WIS) or vehicle
list is thereby not necessary.
2 V-RC-2021030006
e Remove
2 Clean area surrounding cap of
brake fluid reservoir.
Assembly cleaner BR00.45-Z-1028-04A
3 Remove cap from brake fluid
reservoir.
4 Check fill level in brake fluid
reservoir.
p
The fill level must not be above the
maximum marking.
This prevents the brake fluid
reservoir from overflowing when
the brake pistons are pushed back.
If the fill level in brake fluid
reservoir is too high,
↓
extract brake fluid.
i
Commercially available devices/
tools
Extraction bellows
5 Move rear axle brake pads into
assembly position.
f AR42.10-D-1710-01TS
p
Do not operate the service brake
while “Move to assembly position”
is shown.
Otherwise, the spindle of the brake
caliper (1) will be damaged.
6 Remove rear wheels.
f AR40.10-D-1100TS
7 Remove electrical wiring harness
from holder (2).
8 Disconnect electrical wiring
harness (4) from electrical wiring
harness (5) to electrical connector.
9 Remove electrical wiring harness
(5) from brake caliper (1).
i
To do this, remove screw (6).
10 Disconnect electrical connector (7)
from actuator motor (8).
11 Remove brake pads on rear axle.
f AR42.10-D-1710TS
i
Reuse brakepads.
12 Remove brake hose (9) on vehicle
side.
f AR42.10-D-0023TS
13 Remove dust cap (10).
V-RC-2021030006 3
14 Remove brake caliper (1). i
To do so, remove screw/bolt (11).
Replace bolt (11).
i
When replacing brake calipers (1),
only install brake calipers (1) from
the same manufacturer and model
on an axle.
g Check
15 Check brake hose (9) for damage. If damage exists,
↓
Replace brake hose (9) subject to
separate invoice.
f AR42.10-D-0023TS
16 Modify brake hose (9).
f AR42.10-D-0023TS
d Install
17 Install new brake caliper (1). i
To do so, screw in new bolt (11).
n Screw/guide pin, brake caliper
to brake caliper support
BA42.10-N-1006-12TS
18 Install dust cap (10).
19 Install brake hose (9) on vehicle
side.
f AR42.10-D-0023TS
i
Do not yet bleed brake system.
20 Install old brakepads of rear axle.
f AR42.10-D-1710TS
i
Do not operate brake pedal yet.
21 Connect electrical connector (7) to
actuator motor (8).
22 Attach electrical wiring harness (5)
to brake caliper (1).
i
Screw in bolt (6) to do this.
n Bolt, wiring harness for wear
indicator to brake caliper
BA42.10-N-1004-12TS
23 Connect electrical wiring harness
(4) with electrical wiring harness
(5) to electrical connector.
24 Install electrical wiring harness on
holder (2).
4 V-RC-2021030006
25 Deactivate brake pad change
mode.
f AR42.10-D-1710-01TS
p
Whilst doing so, do not actuate
service brake.
Otherwise, the spindle of the brake
caliper (1) will be damaged.
26 Bleed brake system.
f AR42.10-D-0010TS
27 Fit brake pads on rear axle. i
For this, depress brake pedal
several times until the brake pads
contact the brake disks.
Firm resistance should be
noticeable at the brake pedal.
28 Mount rear wheels.
f AR40.10-D-1100TS
Update software / Reset counter
29 Connect diagnostic system.
a AD00.00-D-2000-06TS
i
It is absolutely essential to
precisely follow the operation steps
as described in the vehicle
diagnosis system.
30 Connect charging equipment.
f Maintaining on-board electrical
system voltage when performing
test and diagnosis work on vehicle
AR54.10-D-1127TS
p
During the entire work procedure a
sufficiently large voltage supply
must be provided for the vehicle’s
on-board electrical system.
Otherwise any undervoltage that
occurs may damage the control
units.
i
Follow the operating instructions
for the charger.
i
Use the charger to ensure that an
adequate power supply (min.
12.5 V) is provided for the onboard
electrical system battery.
31 Update software for ESP® control
unit.
i
It is absolutely essential to
precisely follow the operation steps
as described in the vehicle
diagnosis system.
V-RC-2021030006 5
32 Reset actuator counter of electric
parking brake.
i
To do this, select the following
menu items:
Control units view →
N30/4 – Electronic Stability
Program (ESP®) →
Adaptations →
Teach-in processes →
Resetting of ‘Electric parking brake’
counter
i
It is absolutely essential to
precisely follow the operation steps
as described in the vehicle
diagnosis system.
33 Disconnect diagnostic system.
a AD00.00-D-2000-06TS
34 Remove charger from vehicle.
f AR54.10-D-1127TS
g Check
35 Perform brake test on test stand.
e AP42.00-D-4290TS
n Rear axle brake caliper
Number Designation Model 907
except code
IT5 (5.0 tonner)
BA42.10-N-1004-12TS Bolt, wiring harness for wear indicator to brake caliper Nm 8
n Rear axle brake caliper
Number Designation Model 907
except code
IT5 (5.0 tonner)
BA42.10-N-1006-12TS Screw/guide pin, brake caliper to brake caliper support Nm 34
Repair materials
Number Designation Order number
BR00.45-Z-1028-04A Assembly cleaner A 000 986 56 01
6 V-RC-2021030006
Parts ordering note
Part no. Designation Quantity
A 000 989 08 07 11 Brake fluid (1L) n. B.
Parts scope, model 907
A 907 423 82 00 Left brake caliper n. B.
A 907 423 83 00 Right brake caliper n. B.
Replace brake calipers on rear axle (code: VS3BREPB, acc. no.: 42 960 93) SM42.10-D-0046SG
V-RC-2021030006 7
*****************************************************************************************************************
SEOCONTENT-END
16 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FREIGHTLINER | SPRINTER 1500 | 2019-2020 |
| FREIGHTLINER | SPRINTER 2500 | 2019-2020 |
| FREIGHTLINER | SPRINTER 3500 | 2019-2020 |
| FREIGHTLINER | SPRINTER 4500 | 2019-2020 |
| MERCEDES-BENZ | SPRINTER 1500 | 2019-2020 |
| MERCEDES-BENZ | SPRINTER 2500 | 2019-2020 |
| MERCEDES-BENZ | SPRINTER 3500 | 2019-2020 |
| MERCEDES-BENZ | SPRINTER 4500 | 2019-2020 |
13 Associated Documents
Recall 573 Report- Amendment 3
RCLRPT-20V802-6449.PDF 216.08KB
Loading...
Reload document 
Open in new tab
Recall 573 Report- Amendment 4
RCLRPT-20V802-1946.PDF 216.1KB
Loading...
Defect Notice 573 Report
RCLRPT-20V802-8460.PDF 214.907KB
Loading...
Recall Acknowledgement
RCAK-20V802-5560.pdf 245.028KB
Loading...
Recall 573 Report- Amendment 2
RCLRPT-20V802-8569.PDF 216.006KB
Loading...
Recall 573 Report- Amendment 1
RCLRPT-20V802-4993.PDF 215.285KB
Loading...
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-20V802-4746.pdf 90.817KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20V802-2601.pdf 630.193KB
Loading...
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-20V802-3642.pdf 161.567KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20V802-3008.pdf 1770.695KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20V802-2754.pdf 1478.417KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20V802-5543.pdf 1762.549KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20V802-4247.pdf 1494.09KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V802&docType=RCL
- 【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- 2024 Top Choice for ABS Bleeder Scan Tool - Is the brake pedal always slowly sinking down or becoming loose? This ABS brake bleeding scan tool will cycle the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with ABS auto bleed. By following the instruction step by step, even a beginner can navigate through easily. Coverage check before purchasing via FOXWELL official site: Support- Diagnostic Coverage List. Tip: It won’t work on vehicles lacking an auto bleed function.
- More Than a Entry Level OBD2 Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD-II diagnostics to the next level by customizing functions for ABS and SRS system. This SRS and ABS scanner provides in-depth insights on error code diagnosis, wheel speed sensor, airbag circuits, cable connectors monitor, etc... Note: This scanner DOES NOT work on Airbag crash data/programming issues.
- No More Higher End Service than You Need - One NT630 Plus is enough! This obd2 scanner with ABS and SRS takes in-depth diagnosis on Anti-Lock Brake System & SRS/Airbag, and also performs Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset daily reset services. These issues will be restored after the car faults repaired. Note: Some classic vehicles without the electronic control system can not support the reset service.
- Also can Work like NT301 - The NT630 Plus ABS code reader can connect to the OBD-II port directly. It will diagnose all OBD-II modules instantly, displays the live data, locates bad sensors and indicate I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
- Higher-level Services wih Lower Cost - Cost less to own a ABS SRS Bidirectional Scan Tool that is not found on similar code readers & scan tools. This car diagnostic scanner allows you to test all potential car faults in the ABS/Airbag system, with functions returning to normal once you exit the program. Please note, that only ABS/SRS modules are supported.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor, and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
- 🔥【Easy to use and friendly】+【Faster diagnostic speed】 FOXWELL NT604 is the 2024 newest enhanced 4 system code reader, which is capable of reading/clearing fault codes, retrieving vehicle information and displaying 4-in-1 live data stream. You will easily find what's wrong with your car to avoid expensive trip to dealership. At the same time, this car scanner will directly tell you what the corresponding code means, avoiding the hassle of searching for information.
- 🛠【OBD2 Full Function】+【Check Engine/ABS/SRS/Transmission】 This scan tool will allow you to perform full OBDII diagnostic for all cars with OBDII protocols. You can use it to check if your car is ready for annual testing through the I/M Readiness menu. In addition, the device also has value-added functions such as real-time data flow, DTC Lookup, data playback, and printing. Turn off Check Engine/ABS/SRS/Transmission Light. Tips: the fault code can be only erased after the problem is fixed.
- 🚗【Cover 10000+ models ＆60+ Car Makes】 and 【AUTOVIN】 Compared with Other scanner which only supports 40 car makes, NT604 car diagnostic scanner for all cars contains more than 60 car brands and 10000+ cars for almost all OBDII cars sold worldwide like passenger car, SUVs, minivans, light-duty trucks, etc. produced by Asian, European, American with the supported year differing from 1996 to 2024. It allows you to get your VIN and vehicle info rapidly, no need to take time input one by one.
- 🛒【Battery Voltage Checker】+【Lifetime Free Update, No Subscription fee 】 It monitors the real-time voltage of the vehicle battery and displays it in graphical and textual form, informing you of the health status of the battery. Also monitor the health of your car. NT604 is equipped with the latest software directly, so you don't need to download a bunch of updated software after unboxing to use it. Lifetime no subscription fee for upgrading software.
- 🎁【Great festival Idea：Applicable for Many People】+【High End and Exquisite Protective Packaging】 Best one item for Dad, Husband, Boyfriend, Handy Men. Every car owner will need a 4 systems diagnostic scan tool! This code reader fits for home mechanic, DIY car owners, advanced hobbyiest, car dealer, auto repair shop, automotive engineer, diagnostic tech, automobile tech, individual. Apparently, this is the most economical scan tool for every mechanic.
- 💻Note: (About UPDATE) ANCEL FX2000 car scanner diasgnostic tool can be used directly as it comes with existed software, You don't need to register or update beforethe first use. It's recommended to update your scanner with SD card only when it fails to work on your car, or it's slow to load all menus or if you need newer software version. 📢Software update supports WIN XP, 7, 8, 10 operation systems only, but not for Mac and ios system. 📧Any concerns, pls feel free to 𝙚-𝙢𝙖𝙞𝙡 us via 𝙖𝙢𝙖𝙯𝙤𝙣 @ 𝙖𝙣𝙘𝙚𝙡𝙩𝙚𝙘𝙝. 𝙘𝙤𝙢.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 automotive scanner diagnostic tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use this obd2 scanner with abs and srs to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 OBD2 scanner diagnostic tool also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【A/T TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the A/T transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. This transmission scanner provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 obd2 scanner with abs and srs is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
- SRS Airbag Light Reset Tool - D800 OBD scan tool is design for BMW. The B800 diagnostic scanner ONLY work for BMW's E36/E46/E34/E38/E39/Z3/X5/X3 will allow you to read airbag trouble codes on BMW's
- Compatible - Models available for most BMWs built between 1994 and 2003 like ALL variants in E36/E46/E34/E38/E39/Z3/Z4/X5. But it doesn't work with 2001 BMW 330i.
- High Effective - Reset the dashboard SRS airbag light within seconds. This is a very easy to use tool that comes with instruction manual to help you diagnose problems
- Easy to Use - And clear the code by the enter button; confirms a selection of a menu list or return to the main menu; scrolls through menu items or cancel and operation by the scroll button
- Easy to Understood - With LCD display, it can show the test results and control it by the buttons. Provide 1-year warranty, if you have any issue please contact us with Order ID asap and we will try our best to help you. 🙂
- The VD500 OBD2 scanner is specifically designed to diagnose Volkswagen Group (Fits for VW/Audi/Skoda/ SEAT) 12-volt 16-pin vehicles, but can also be used with other 12-volt (non-Volkswagen) and light trucks (non-electric) vehicles manufactured in 1996 or later that are OBD II -compliant with standard 16-pin OBD II protocols (J1850 VPM, J1850PWM, ISO9141, KWP 2000 and CAN). Please send your vehicle information to our 💌amazon@anceltech.com💌 to check compatibility.
- For Volkswagen (VAG) vehicles diagnostics, the device can not only read and clear codes on engine, ABS, transmission, SAS (not all cars), ESP, TPMS and other systems, but also reset the oil, brake pad and throttle position adaption.
- For other OBD II vehicles (non-Volkswagen), the VD500 can read and clear fault codes, display fault code definitions, turn off the CEL (check engine light) and retrieve VIN information ONLY.
- The VD500 diagnostic offering for Volkswagen vehicles covers the following vehicles: fits for VW (CC, EOS, Golf, GTI, Jetta, Passat, Phaeton, Polo, Rabbit, Sharan, Tiguan, Touran, Touareg); fits for Audi (A3, A4, A6, A7, A8, A5, Q3, Q5, Q7, R8, RS3, TT, RS, RS5, S4, S6); fits for Skoda (Octavia, Rapid, Yeti, Kodiaq, Fabio, Superb); fits for SEAT (Leon, Ateca, Ibiza, Altea, Cushion, Cord, Alhambra) Diagnostics.
- With English and German as display languages, this diagnostic scan tool provides life-time free software updates to fix the latest bugs or add new parameters. Simply download the software from the official website, then follow on-screen instructions to install it.
- 【Great Ideal For Every Car Owner】Prefect choice for your father, husband, brother or boyfriend. EVERY CAR OWNER WILL NEED IT! Also, the lifetime f-ree update is provided for more vehicle coverage, bug fixes. SAVE AT LEAST $1000+ PER YEAR!Get LAUNCH CRP123 Elite car diagnostic scanner and give your lover a surprise!🎁Get the Extra Gifts :Protective Case Storage Bag,please reach us at: cardiag-aftersales @ hotmail.com.
- 【 Read & Clear/Reset Engine/ABS/SRS/Transmission Diagnostic Scan Tool 】LAUNCH CRP123 OBD2 Scanner can test Engine, Transmission, ABS and Airbag four systems, also reads and resets code, displays data stream graphic, stores and playbacks dynamic data stream,helps to quick analysis and diagnosis.
- 【 Error Fault Code Reader】Except the full 10 modes OBD2 diagnostic functions like, retrieving I/M readiness, Freeze Frame Data, Read Dynamic Data stream and V-ehicle Information, O2 Sensor Test, EVAP Test of F-uel Tank System (Mode 8) and Advanced On-board Monitoring (Mode 6), launch crp123 obd2 scanner can not only reveal what error codes your car is producing, but also erase your v-ehicle’s check engine light after problem fixed, the DTC help and explanation also tell you the exact problem.
- 【 Live Data Graphing + Read/Record/Playback Data stream + Print diagnostic data 】Live Data Graphing,more intuitive to know your vehicle’s problem.Large size Color Screen ;Print Function:Print the diagnose result easily; with user manual and register & update tutorial video uploaded in the link by us,you can Look up it anytime by ONE-CLICK.
- 【 Find Your Vehicles Here】Launch CRP123 obd2 scanner Supports mainstream vehicles on the world,fit for ACURA VW AUDI AUST FORD BENZ BMW CHRYSLER FIAT GM HOLDEN HONDA HYUNDAI INFINITI JAGUAR ISUZU KIA LANDROVER LEXUS MAZDA MITSUBISHI NISSAN OPEL PORSCHE SAAB SEAT SKODA SMART MERCEDES SPRINTER SUBARU SUZUKI SCION TOYOTA USA FORD VOLVO PEUGEOT CITROEN RENAULT EUROFORD.Etc.
- [Pro OBD2 Scanner] - BlueDriver is the easiest way to scan and understand your vehicle like a professional mechanic. Read and clear your car’s trouble codes and check engine light.
- [Read & Clear All The Codes] - BlueDriver's enhanced vehicle diagnostics gives you access to information normally available only to mechanics on their OBD2 scan tools. Now you can read and clear ABS, Airbag, SRS, TPMS codes, and many more.
- [Get The Right Fix] - Much more than a car code reader, BlueDriver is a diagnostic tool. Get unlimited specific repair reports containing possible causes, reported fixes, and more for virtually every vehicle make and model.
- [Wireless & Bluetooth Enabled] - Say goodbye to wires. BlueDriver connects with Bluetooth via your phone/tablet to a sensor that plugs into your car's OBDII port. Get all of the capabilities of an expensive code reader & scan tool without any annoying wires.
- [User-Friendly App and Repair Videos] - BlueDriver gives you more ways to scan and fix your vehicle. Our iOS & Android app connects you to a large database of repair videos with step-by-step directions of repairs.
Last update on 2024-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.