“This site contains affiliate links for which OEMDTC may be compensated” |
September 29, 2020 NHTSA CAMPAIGN NUMBER: 20E072000
Service Gauge Not Compatible with APS System
If the APS is not engaged, there would be an increased risk of occupant injury in the event of a crash.
NHTSA Campaign Number: 20E072
Manufacturer Spartan Fire, LLC
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 16
Summary
Spartan Fire, LLC is recalling certain Ametek gauges, part number 2101-NN1, sold as replacement parts for the Advanced Protection System (APS) in Gladiator and MetroStar vehicles. The Ametek gauges are not a direct replacement for the Pacific Insight gauges and may result in the APS not engaging.
Remedy
Spartan Fire will notify owners and send a remedy kit with instructions and a jumper wire, free of charge. The recall began November 23, 2020. Owners may contact Spartan Fire customer service at 1-866-582-2376.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
APPLIES TO:
This Recall Service Bulletin applies to Spartan Fire, LLC Model Year 2012-2016 Gladiator and Metro Star cab-chassis built between August 8, 2012, and October 11, 2016. Vehicles affected are limited only to cab-chassis equipped with Spartan Advanced Protection System that have had a replacement instrument panel S-2708-001 installed.
CONDITION:
Advanced Protection System may not be operable after replacement of
original instrument panel with kit S-2708-001.
CORRECTION:
Install jumper wire on APS activation relay.
GENERAL INSTRUCTIONS:
Thoroughly review entire service bulletin before starting work. If there are questions or concerns with steps defined in this service bulletin, contact Spartan Fire, LCC. Customer & Product Support Group.
All applicable industry safety standards must be followed when performing work identified in this procedure.
STEP-BY-STEP INSTRUCTIONS:
1. Crimp the 2 eyelets (0636-GG5-A08) on each end of the pink wire (0740-GG5-A08) provided with the kit.
2. Locate the solid-state relay in the center switch console, as shown in FIG 2-1.
3. Use the provided diagram 0221-GG9-3471 to rework the circuits connected to the solid-state relay, as shown in FIG 3-1:
a. Remove SP006 from Post 4(-) and protect the end of the wire.
b. Remove SP1047 from the Post 3(+) and place on Post 4(-)
c. Connect the pink wire created in step 1 to Post 1(+), leaving current wire SP1598 connected.
d. Connect the other end of the pink wire to post 3(+).
4. Once all electrical connections are made, turn master and ignition switches to the ON position and start the vehicle
5. Verify the Advanced Protection System (APS) icon in the Lightbar/Message Center (LMC) flashes shortly after the engine starts. The icon will flash 6 to 8 times before turning off. The flashing icon indicates the APS control module is active and completing a power-on self-test cycle. If no faults are detected at startup, the light is extinguished.
SEOCONTENT-START Recall Service Bulletin RSB20-560-001 Page 1 of 3 QUA-FR-0291 Rev: 4.0 20-12 Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to vehicles of specific nature in conjunction with industry standards. Professional Technicians are appropriately trained on industry standards and have the tools and equipment to perform procedures safely and properly. DATE: October 29, 2020 APPLIES TO: This Recall Service Bulletin applies to Spartan Fire, LLC Model Year 2012- 2016 Gladiator and Metro Star cab-chassis built between August 8, 2012, and October 11, 2016. Vehicles affected are limited only to cab-chassis equipped with Spartan Advanced Protection System that have had a replacement instrument panel S-2708-001 installed. NHTSA/TC Id: 20E072 CONDITION: Advanced Protection System may not be operable after replacement of original instrument panel with kit S-2708-001. CORRECTION: Install jumper wire on APS activation relay. LABOR ALLOCATION: 1 hr. CLASSIFICATION: E3 PARTS NEEDED: QTY Part Number Description 1 S-2748-001 KIT – APS REWORK FOR AMETEK, ER SERVICE GAUGES Kit # S-2748-001 Contains: QTY Part Number Description 0.75 ft 0740-GG5-A08 WIRE-18AWG PINK GXL 2 0636-GG5-A04 EYELET #10 (22-16 GA) RED 1 0221-GG9-3471 DIAGRAM – APS CONTROLS AMETEK SERVICE GAUGE REWORK 1 RSB20-560-001 Instruction Document – English 1 RSB20-560-002 Instruction Document – French Recall Service Bulletin RSB20-560-001 Page 2 of 3 QUA-FR-0291 Rev: 4.0 20-12 Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to vehicles of specific nature in conjunction with industry standards. Professional Technicians are appropriately trained on industry standards and have the tools and equipment to perform procedures safely and properly. GENERAL INSTRUCTIONS: Thoroughly review entire service bulletin before starting work. If there are questions or concerns with steps defined in this service bulletin, contact Spartan Fire, LCC. Customer & Product Support Group. All applicable industry safety standards must be followed when performing work identified in this procedure. STEP-BY-STEP INSTRUCTIONS: 1. Crimp the 2 eyelets (0636-GG5-A08) on each end of the pink wire (0740-GG5-A08) provided with the kit. 2. Locate the solid-state relay in the center switch console, as shown in FIG 2-1. FIG 2-1 3. Use the provided diagram 0221-GG9-3471 to rework the circuits connected to the solidstate relay, as shown in FIG 3-1: Recall Service Bulletin RSB20-560-001 Page 3 of 3 QUA-FR-0291 Rev: 4.0 20-12 Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to vehicles of specific nature in conjunction with industry standards. Professional Technicians are appropriately trained on industry standards and have the tools and equipment to perform procedures safely and properly. a. Remove SP006 from Post 4(-) and protect the end of the wire. b. Remove SP1047 from the Post 3(+) and place on Post 4(-) c. Connect the pink wire created in step 1 to Post 1(+), leaving current wire SP1598 connected. d. Connect the other end of the pink wire to post 3(+). FIG 3-1 4. Once all electrical connections are made, turn master and ignition switches to the ON position and start the vehicle 5. Verify the Advanced Protection System (APS) icon in the Lightbar/Message Center (LMC) flashes shortly after the engine starts. The icon will flash 6 to 8 times before turning off. The flashing icon indicates the APS control module is active and completing a power-on self-test cycle. If no faults are detected at startup, the light is extinguished. FIG 3-2 Step 3b Step 3d Step 3a Step 3c SEOCONTENT-END
5 Affected Products
Equipment
BRAND | PART NO. | PRODUCTION DATES |
AMETEK | APS GAUGE |
Vehicles
MAKE | MODEL | YEAR |
SPARTAN FIRE | GLADIATOR | 2018-2019 |
SPARTAN | METROSTAR | 2018-2019 |
10 Associated Documents
Recall Quarterly Report #3, 2021-2
RCLQRT-20E072-0450.PDF 211.307KB
Recall 573 Report- Amendment 2
RCLRPT-20E072-1176.PDF 213.747KB
Defect Notice 573 Report
RCLRPT-20E072-5989.PDF 213.742KB
Recall Acknowledgement
RCAK-20E072-4308.pdf 244.869KB
Recall 573 Report- Amendment 3
RCLRPT-20E072-7932.PDF 213.778KB
Recall Quarterly Report #1, 2020-4
RCLQRT-20E072-8893.PDF 211.133KB
Recall Quarterly Report #2, 2021-1
RCLQRT-20E072-4131.PDF 211.228KB
Recall Quarterly Report #4, 2021-3
RCLQRT-20E072-0274.PDF 211.415KB
Remedy Instructions and TSB
RCRIT-20E072-2486.pdf 615.96KB
Recall Quarterly Report #5, 2021-4
RCLQRT-20E072-3368.PDF 211.526KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20E072&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- Adopt imported pressure sensor and electronic components, high precision, adopt 304 stainless steel gauge tail, resistance
- Digital pressure gauge.With clear LCD display, with blue back light source, so it is clearer for use at night
- MPA/PSI/ Kgf/cm2, multiple units can be switched display
- Touch the button, the operation is simpler, the back light is delayed for 10 seconds, automatic shutdown, more power saving, longer service life
- Applications: pneumatic tools, air compressed system, agricultural machinery, industrial equipment, power plant, water companies, gas processing equipment, water treatment equipment, environmental protection equipment such as pressure measurement.
- Easily identify pressure fluctuations with CARBO Instruments pressure gauge. Use our liquid-filled, high-performance psi pressure gauge to monitor fluid, gases, oil and air leaks and buildup of pressure in a system.
- Built to last construction: The case of our heavy duty pressure gauge is made of stainless steel with wetted parts of brass and copper alloy. The lens is made of polycarbonate, making it hard to break and scratch resistant
- Liquid filled for better performance: Our liquid filled pressure gauge can stand up to shock and vibrations because the internal fluid dampens system pulsation, the gauge can better absorb vibration and pressure spikes.
- Convenient & user-friendly: Large dial allows easy reading of pressure. The compact design of our stainless steel pressure gauge is easy to carry and portable.
- Wide application: Our stainless steel pressure gauge can be used to measure water pressure, air pressure, hydraulic pressure and oil pressure. Ideal for pumps, compressors, hydraulic presses, pneumatic equipment and for planning and designing an irrigation system.
- [STURDY SHELL]: The digital gauge can withstand impacts and keep its accuracy over the service life even if the they are subject to impacts, durable and easy to use. The gauge is equipped with a silicone case for waterproof and protection. And the gauge tail is made with stainless steel, waterproof and anti-corrosion. It adopts premium pressure sensor and electronic components, high precision and stability.
- [FEATURES]: Unit conversion between MPa, kPa and Bar.
- [LCD DISPLAY]: The air pressure gauge's digital backlight display provides clear results even in the night. The 4-digit LCD display allows for easy point-of-reference pressure readings.
- [PRECISION and STABILITY]: It adopts premium pressure sensor and electronic components, high precision and stability.
- [NOTE]: Do not touch the sensor with a hard object. 100% tested before shipping to ensure product safety, stability and durability.
- Great Compatibility — Used to measure gas, liquid, oil and other non-corrosive mediums of stainless steel. Widely used in construction, machinery, shipping, chemical industry, mining, petroleum, hydraulic equipment, pneumatic equipment, agricultural machinery, medical equipment, power and water companies, laboratory equipment, measuring equipment monitoring, etc.
- Specification — 1 x Intelligent Digital Pressure Gauges: 0-700BAR/10000PSI/70Mpa and 1 x Black Silicone Protector | Connection Thread: NPT1/4 male | Display Unit: Bar, PSI, MPa, Kgf/cm2; Overload Capacity: 150% | Accuracy: 0.2%FS | Long-term Stability: 0.2%FS/year | Working Temperature: -20C-70C | Input Voltage: 3V (two 1.5V AAA batteries) | Function: On/off, zero clearing, units changing, backlight.
- Perfect Design — This is an essential tool for pressure measurement, equipment supporting, equipment calibrations, etc. It is flexible use, simple operation, easy debugging, safety and reliability. Allows connection to standard test ports on most USA, Japanese and European brand excavator construction machinery.
- Superior Material — Premium grade hard stainless steel housing with a silicon rubber protector, anti-corrosion and impact resistance. High-precision piezoresistive pressure sensor and display the pressure accurately in real time with a large size 4 digit LCD. IP67 protection class, waterproof, dustproof and shockproof for long-lasting reliability.
- 100% Satisfaction Guarantee — If you're not 100% satisfied with our items, simply return it for a full refund in 30 days. Support 12 months’ Warranty. Professional & Sincere Service allows you to take no risks to purchase in E-cowlboy!
- Excellent Material: Dial face air tank gauge is made of metal, which is not easy to rust and has strong anti-cracking ability. Strong toughness, high hardness, can be used for a long time.
- Exquisite: The dial digital scale is clear and accurate, and the surface is smooth, which is convenient for clear reading. Clear thread, good sealing performance.
- Scope of Application: This is a pressure gauge that can be used to measure water pressure, oil pressure and air pressure, which is widely used in many industrial fields.
- What You Will Get: The package contains 1 pcs air pressure gauge with 50mm/1.96" dial diameter and 1/8" NPT connection (+/- 2.5% accuracy).
- Quality Assurance:BokWin is committed to providing cheap and cheerful bed set for customers. We will continue to improve our products and services to bring you high-quality shopping experience.
- Accurate Measurements - Our digital turbine flow meter provides precise readings with a high accuracy of ±1%, ensuring reliable data for liquids like water, diesel, gas oil, gasoline, kerosene, methanol, E15, and more.
- Digital LCD Display - The clear LCD screen of the digital flow meter shows real-time flow rates, accumulated totals, and instantaneous flow. It makes monitoring and recording your liquid usage easy. Single count range: 99999; Total cumulative count range: 29999999.
- Versatile Unit Options - Switch between GAL(Gallons), QTS, PTS, L, and m³ units to meet your specific measurement needs, offering flexibility and convenience. Flow range: 2.6-26 GPM (10-100 LPM), working pressure: 6 Bar.
- Durable Build - Crafted with an aluminum alloy casing and stainless steel turbine, this digital fuel meter is designed to withstand various environments and provide long-lasting performance. Working temperature: -10°C~80°C(14-176°F).
- Energy-Saving - The display screen of the digital water flow meter will turn off after 2 minutes of inactivity. It automatically turns on when there is liquid flow and can also be activated by pressing any key. Standby time: over 1 year.
- Pressure gauge 1 4 npt pressure gauge Liquid filled pressure gauge, Mechanical oil pressure gauge Pressure gauge lower mount Psi pressure gauge Accuracy Class:F±3/2/3%(ASME B40.100 Grade B) Kl 1.6 FOR 2 1/2″,3″,4”
- Stainless pressure gauge Case,Ring:stainless steel
- Pressure gauge lower mount Connection:brass
- Stainless steel pressure gauge Bourdon tube:brass Connection:brass
- Pointer and dial: aluminum
- GlowShift 10 Color Digital Series Dual Temperature & Pressure Gauge Allows You to Monitor 2 Vital Engine Statistics from 1 Unit - Keep an Eye on Water, Transmission, Oil or Differential Temperatures, as well as Boost, Oil or Fuel Pressure
- Temperature Readings from 68° to 302° Fahrenheit - Pressure Readings from 0 to 145 PSI - Set Each Display to its Own Color - 2-1/16" (52mm) Gauge with 2 Digital Displays & Tinted Lens
- Quick-Glance & Easy to Read Digital Display - 10 Solid Color Modes & 2 Color Cycle Modes - Self-Calibration at Startup Ensures that the Gauge is Performing Optimally
- Includes 1/8-27 NPT Temperature Sensor, 1/8-27 NPT Pressure Sensor, (2) 9' Sensor Harnesses, 2' Power Harness, Gauge Visor, Mounting Hardware & Installation Instructions
- GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support
- Brass and Stainless Steel wetted parts for measuring non-corrosive liquid pressure. Such as water, oil, fuel pressure test. Compatible with fuel pressure regulator, inline fuel pressure tester and etc.
- Circular dial is enclosed in a 304 stainless steel case for corrosion resistance. Glycerin filled inhibits pointer flutter and prevents damage to the internal mechanics from vibration and pulsation.
- Measures pressure with single scale (0-100 psi). Display accuracy is + or - 3/2/3% over the entire range of the gauge.
- IP67 waterproof prevent condensation inside caused fogging of the window. Offer clear reading.
- Lower mount male connection with 1/8" NPT thread.
- 【Product Name】Stainless Steel Liquid Filled Pressure Gauge.
- 【Size】1/4"NPT;2.5" DIAL FACE.
- 【Installation method】Lower Mount.
- 【Temperature Range】32-131℉/0-55℃【Maximum Range】0-10 Psi.
- 【Notice】NPT Thread Size is a Nominal Pipe Size, and it Does Not represent the actual diameter.
Last update on 2024-04-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.