| “This site contains affiliate links for which OEMDTC may be compensated” |
September 8, 2020 NHTSA CAMPAIGN NUMBER: 20V545000
Methane Detector Wiring Harness may Overheat
An overheated wiring harness increases the risk of a fire.
NHTSA Campaign Number: 20V545
Manufacturer Autocar, LLC
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 170
Summary
Autocar, LLC (Autocar) is recalling certain 2019 Xpeditor vehicles equipped with factory installed methane detection systems. The circuit protection of the detection system may be inadequate, and its wiring harness may overheat.
Remedy
Autocar will notify owners, and dealers will replace the ten amp fuse for the methane detector with a three amp fuse, free of charge. The recall began November 6, 2020. Owners may contact Autocar customer service at 1-888-218-3611 or 1-877-973-3486. Autocar’s number for this recall is ACX-2006.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
SAFETY RECALL BULLETIN
NHTSA RECALL 20V545
AUTOCAR, LLC SAFETY RECALL ACX-2006
November 2020
ATTENTION:
Service Managers / Parts Managers.
SUBJECT:
Autocar has determined that a safety defect may exist in the routing of the methane detector sensor harness and/or the methane detector circuit fuse on certain 2019 Xpeditor vehicles which could lead to an over-current condition.
SAFETY RECALL INFORMATION:
This document provides work instructions to inspect, replace and/or repair the methane detector circuit.
VEHICLES AFFECTED:
There are 170 units manufactured after March 1, 2018. To determine if a vehicle is affected by this Recall, log in to the Autocar Warranty Management System at www.autocartruck. com. From the main menu, select “View Recalls/Service Programs” and look for the Autocar recall number above. An excel file will be accessible with the VIN list of affected vehicles. Alternatively, to determine if a single vehicle is affected, select “VIN Profile” from the main menu in the Autocar Warranty Management System. In the “Chassis Number” field, enter the last 6 of the VIN. Once the VIN profile is displayed, scroll down to the “Recall/Service Program Information” section to determine if the Recall is open.
SERVICE RESPONSIBILITY:
Service sites must perform this recall on affected vehicles at no charge to the owner regardless of vehicle mileage, age or ownership. If a vehicle affected by this recall is taken into or is currently in your vehicle inventory, or at your center for service, you must perform this recall before the vehicle is sold or released to the owner.
CLAIMS FOR REIMBURSEMENT:
Submit a claim for reimbursement in accordance with Autocar’s Warranty Administration Manual.
CLAIM CODING INFORMATION:
| Labor Operation Code Number | Time
Allowance SRT |
Description |
| 36406-2-03 | 1.0 HR | Methane detector circuit repair |
REQUIRED PARTS:
(1) 3 AMP ATC Fuse (obtain locally)
SAFETY NOTICES:
WARNING
Allow the vehicle’s engine and cooling system to cool to ambient temperature before performing the repair procedure. A hot engine or cooling assembly may cause burns or other personal injury.
WARNING
Never rely on the hydraulic pressure to hold the cab in an open position. Always use the safety pin in the cab tilt lock tube to prevent serious personal injury or death.
WARNING
To prevent eye injury, always wear eye protection when performing vehicle maintenance, service or inspection.
WARNING
Before working on a vehicle, set the parking brake, place the transmission in neutral and block the wheels. Failure to do so can result in unexpected vehicle movement and can cause serious personal injury or death.
WORKING ON CNG/LNG TRUCKS
SAFETY INSTRUCTIONS
If you store or dispense Compressed Natural Gas (CNG) or Liquefied Natural Gas (LNG), or if you work on CNG or LNG trucks, your location must be fully compliant with applicable codes, regulations and standards, including National Fire Protection Association (NFPA) codes, Society of Automotive Engineers (SAE) standards, American National Standards Institute (ANSI) Natural Gas Vehicle (NGV) standards, the United States Code of Federal Regulations (CFR) and your state and local fire and other applicable codes (including, for example, the California Code of Regulations and the Texas Administrative Code).
Contact your local fire department for guidance and additional compliance information.
Technicians working on Autocar trucks with CNG or LNG engines must be trained in the proper repair of CNG and LNG trucks and engines and the safe storage and dispensing of CNG and LNG.
WARNING
CNG fuel systems include a high pressure (3600 psi) system for fuel storage and a lowpressure system (125 psi) for consumption by the engine. Understanding the characteristics of CNG and how the fuel system works will prevent injury and damage to persons and property.
Attempting to operate or maintain any CNG fuel system without proper training is dangerous. Complete training and consult instructional bulletins from the CNG system suppliers, such as Agility Fuel Systems’ Field Service Bulletin, Safely Working on CNG Fuel Systems.
WELDING AND HOT WORK NEAR CNG AND LNG TRUCKS
WARNING
Welding, grinding, and other “hot work” can be safely performed on or near a CNG or LNG vehicle, but certain precautions must be followed. Understand and perform the necessary precautions provided by the CNG system suppliers, such as Agility Fuel Systems’ Field Service Bulletin, Welding and Hot Work Precautions Near CNG and LNG Vehicles.
CNG CYLINDERS
WARNING
CNG fuel containers must meet Federal Motor Vehicle Safety Standard (FMVSS) 304 (Compressed Natural Gas Fuel Container Integrity) and/or ANSI/CSA NGV2 (Basic Requirements for Compressed Natural Gas Vehicle Fuel Containers). Both standards specify a detailed visual examination every three years.
Truck owners are required to complete all necessary inspections, in accordance with the applicable standards and other resources, such as the Clean Vehicle Education Foundation and NGVAmerica’s Compressed Natural Gas (CNG) Container Visual Inspection Advisory.
FMVSS 304 also requires that cylinders not be used after the end of life (EOL) date provided on the tank label. The EOL date is also displayed in the engine compartment and at the fueling connection of each truck. If there are any question as to proper decommissioning of a cylinder, contact the manufacturer, whose name and address is also required to be on the label.
CNG FUEL CONTAINER PRESSURE RELIEF DEVICES (PRDS)
WARNING
PRDs must be properly maintained and positioned for safe operation of a CNG fuel system. Missing vent caps can allow moisture into PRDs and vent lines, which can freeze and damage these safety components. Debris which clogs the PRDs and/or vent lines can prevent proper function.
PRDs must be positioned to vent upward, not outward, from a vehicle.
Ensure that every truck owner completes periodic inspections of the PRDs and vent lines and systems, in accordance with guidance provided by the system component suppliers.
ALERT FIRST RESPONDERS TO CNG AND LNG
DANGER
In the event of a fire or other emergency, alert first responders to the presence and location of CNG fuel systems, tanks and dispensers. Ensure that emergency personnel are aware of proper precautions, such as those provided in Agility’s First Responder Guide: CNG and LNG Vehicle Fuel Systems.
LOCKOUT/TAGOUT PROCEDURES:
CAUTION
Before entering the vehicle or vehicle body, read and follow OSHA regulations concerning entry and working in “CONFINED SPACE” OSHA 1910.146 and “LOCKOUT/TAGOUT” OSHA 1910.147. Follow OSHA regulations while performing any work on the vehicle. The vehicle must be disabled by the following steps before performing any work on the vehicle:
1. Place the transmission in NEUTRAL.
2. Set the parking brake.
3. Shut the engine OFF.
4. Lock the cab doors and keep the key in your pocket. Block the wheels before entering the body or performing any work on the vehicle.
5. Turn the battery disconnect switch OFF, if equipped.
6. Completely drain the air from the primary/A system and secondary/B system by opening the drain valves on the air tanks themselves or by using the drain manifold if supplied. When draining the air tanks, do not look into the area where air is draining. Dirt or sludge particles may be expelled in the air stream and can cause eye injury.
7. Place magnetic “DANGER” signs on both cab doors before entering the body or performing any work on the vehicle.
8. Take proper precautions before working under the vehicle. Use ramps approved for the weight of your vehicle, or use floor jacks and stands. Never work under a vehicle supported by jacks alone. Always use jack stands to support the vehicle.
REPAIR PROCEDURE:
1. Complete the Lockout/Tagout procedure.
2. Locate the battery box, remove the battery box cover and set aside for re-installation (see Figure 1).
Figure 1, Battery Box
3. Disconnect all battery terminals beginning with the negative connections, then the positive connections.
4. Locate the methane detector power harness in-line fuse holder (see Figure 2).
Figure 2, Methane detector fuse
5. Remove the in-line fuse holder cover and set aside for re-installation, remove the existing fuse from the methane detector power harness in-line fuse holder and discard.
6. Install a 3 AMP ATC fuse into the methane detector power harness in-line fuse holder and re-install the in-line fuse holder cover that was set aside in step 5.
7. Raise the cab in accordance with the following safety precautions and procedures.
WARNING
Remove or secure all loose articles and close all doors before raising the cab. The area above and ahead of the cab must be clear from obstructions. Place front wheels in a straight-ahead position.
Remove the pump handle from its storage on the inside of the cab near the driver or passenger seat.
Place the selector lever on the hydraulic pump in the RAISE position. Insert the pump handle into the pump and operate the handle in an up and down motion. The hydraulic cab latches will open, then the hydraulic cylinders will lift the cab until the midpoint (top) is reached.
Once the cab has reached its midpoint, the cab will move forward to the fully open position. The safety pin in the cab tilt lock device must be installed when the holes line up in the sliding bar. Remove the pump handle when not in use as it may stick out and could cause injury to a passersby.
8. Locate the methane detector sensor in the engine tunnel area of the raised cab, inspect the methane detector sensor harness (see Figure 3 and Figure 4).
Figure 4, Methane detector sensor harness (undamaged)
If no damage is found, proceed to Step 9.
If damage is found to the methane detector sensor harness, contact Autocar technical support at 888-218-3611 for assistance with repair (see Figure 5 and Figure 6).
Figure 5, Methane detector sensor harness (damaged)
Figure 6, Methane detector sensor harness (damaged).
9. Re-connect the batteries, beginning with the positive connections and followed by the negative connections.
10. Re-install the battery box cover that was set aside in Step 2.
11. Lower the cab.
12. Turn on the battery disconnect switch and perform a functional test of the methane detector (self-test).
If the self-test passes:
Repairs are complete.
If the self-test fails:
Contact Autocar technical support at 888-218-3611 for assistance.
IMPORTANT SAFETY RECALL
This notice applies to your vehicle(s) with the VIN(s) indicated on the enclosed owner response cards.
AUTOCAR, LLC SAFETY RECALL ACX-2006
NHTSA RECALL 20V545
November 2020
Dear Autocar Truck Owner:
This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Autocar, LLC has determined that a defect, which relates to motor vehicle safety, exists in 170, 2019 model year Xpeditor chassis. These chassis were manufactured between March 1, 2018 and October 10, 2018, with non-sequential serial numbers in the range of 227086 through 228821. Our records indicate that your vehicle was manufactured within this time period and may contain the defect described herein.
MODELS AFFECTED:
Autocar Xpeditor MY 2019
COMPONENTS AFFECTED:
Methane detector harness and fuse.
SAFETY DEFECTS AND POTENTIAL RISKS:
The circuit protection of a factory installed methane detector is inadequate based on the sensor harness wire gauge. Improper routing of the sensor harness can also lead to it becoming damaged, causing an overcurrent condition. If an overcurrent condition occurs, the fuse may not open before the power wire harness overheats, which could lead to a fire, increasing the risk of personal injury or property damage.
REPAIR REQUIRED:
A three-amp fuse will replace the ten-amp fuse installed for the methane detector. The harness will be inspected for proper routing, and if needed will be routed to avoid damage.
TIME REQUIRED FOR THE REPAIR:
The labor time to repair your vehicle is 1.0 hours.
WHAT YOU SHOULD DO:
To have your vehicle repaired, contact your local authorized Autocar service site or email warranty@autocartruck.com.
PRIOR REPAIRS:
If you have previously paid for repairs relating to this recall you may be entitled to recover the amount you paid for those repairs. Submit a copy of all documentation supporting your claim to Autocar at the address set forth below in the “Assistance” section.
NOTICE REGARDING LEASED VEHICLES:
If you are a Lessor (as defined below) of a vehicle that is affected by this notice, you are obligated under federal law to provide a copy of this Notice to the lessee of such vehicle within 10 days of your receipt of this Notice. Further, you must maintain a record, which identifies the lessee(s) to whom you send a copy of this Notice, the date you send the Notice and the VIN of the vehicle that you have leased to the lessee(s).
For purposes of this Notice, the term “Lessor” means a person or entity that is the owner, as reflected on the vehicle’s title, of any five or more leased vehicles, as of the date of this Notice.
OWNER RECALL RESPONSE CARD:
The enclosed Owner Recall Response Card identifies your vehicle. Please complete this postage-paid card and return it to Autocar. If you do not own, have sold or have traded the vehicle identified on the card, please indicate that on the postage-paid card and return it to Autocar.
ASSISTANCE
If you need assistance with this recall, call our toll-free numbers below or write to Autocar at:
Autocar, LLC
Service & Warranty Departments
551 S. Washington St.
Hagerstown, Indiana 47346
888-218-3611 (Toll Free)
877-973-3486 (Toll Free)
You may also submit a complaint to:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue SE
Washington, DC 20590
or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov.
We regret any inconvenience this recall may cause, but we hope you recognize Autocar’s concern for your safety and satisfaction with your vehicle.
Sincerely,
AUTOCAR, LLC
ACF 00002 Rev. 000
551 South Washington Street, Hagerstown, IN 47346 Office: 765.489.5499 Fax: 765.489.5230
IMPORTANT SAFETY RECALL
AUTOCAR, LLC SAFETY RECALL ACX-2006
NHTSA RECALL NO. 20V545
November 2020
TO: U.S. Distributors
Dealer Principals, Service Managers, Warranty Managers, Parts Managers
This notice is being sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Autocar, LLC has determined that a defect, which relates to motor vehicle safety, exists in 170, 2019 model year Xpeditor chassis. These chassis were manufactured between March 1, 2018 and October 10, 2018 with non-sequential serial numbers in the range of 227086 through 228821. Accordingly, a recall to address this issue is being initiated effective November 6, 2020.
MODELS AFFECTED:
Autocar Xpeditor MY 2019
COMPONENTS AFFECTED:
Methane detector harness and fuse.
SAFETY DEFECTS AND POTENTIAL RISKS:
The circuit protection of a factory installed methane detector is inadequate based on the sensor harness wire gauge. Improper routing of the sensor harness can also lead to it becoming damaged, causing an overcurrent condition. If an overcurrent condition occurs, the fuse may not open before the power wire harness overheats, which could lead to a fire, increasing the risk of personal injury or property damage.
REPAIR REQUIRED:
A three-amp fuse will replace the ten-amp fuse and the harness will be inspected and corrected as needed at no charge to the owner.
REPAIR AVAILABLE:
VIN profiles in the Autocar Warranty System will be updated to show the open recall on November 6, 2020 and a spreadsheet of the affected VINs will be available in the Warranty system.
REMINDER:
It is a violation of Federal law to sell or lease a vehicle covered by this recall notice unless the recall remedy has been completed. Substantial civil penalties apply to violations of this law.
If you have any questions or concerns, please contact the Autocar Warranty Department at warranty@autocartruck.com.
Sincerely,
AUTOCAR, LLC
ACF 00002 Rev. 000
551 South Washington Street, Hagerstown, IN 47346 Office: 765.489.5499 Fax: 765.489.5230
General Recall Reimbursement Plan
I. Introduction
Pursuant to 49 U.S.C. 30120(d), 49 C.F.R. Parts 573 and 577, and other applicable requirements, Autocar, LLC and Autocar Industries, LLC (collectively “Autocar”) hereby provides the National Highway Traffic Safety Administration (“NHTSA”) its general reimbursement plan for the cost of remedies paid for by vehicle owners before they are notified of a related safety recall.
As set forth at 49 C.F.R. 573.6(c)(8)(i) and 49 C.F.R 573.13, the following information sets forth Autocar’s general plan to reimburse owners and purchasers for costs incurred for remedies in advance of notification of potential safety-related defects or noncompliance.
II. Reimbursement Notification
Autocar’s notice to a vehicle owner in accordance with 49 C.F.R. Part 577 will indicate whether Autocar is offering a refund. A vehicle owner will be eligible for reimbursement if the owner paid to have service to remedy the defect or noncompliance prior to a specified ending date.
As set forth at 49 C.F.R 573.13(c)(2), the ending date shall be 10 calendar days after the date on which Autocar mailed the last of its Part 577 notifications to owners in the United States, unless a specific reimbursement plan is made available for a particular recall.
Autocar’s notice will instruct owners to seek eligible reimbursement through Autocar’s Service & Warranties Department, at the following address or otherwise applicable business address:
Autocar LLC
Service & Warranties Department
551 S. Washington Street
Hagerstown, Indiana 47346
Owners will also be instructed that they may contact Autocar by telephone (toll free) at 888-218-3611 or 877-973-3486
NHTSA’s regulations (see 49 C.F.R. 573.13(c)) permit Autocar to identify a beginning date for reimbursement eligibility. Accordingly, an owner who paid to remedy the defect or noncompliance prior to the identified beginning date would not be eligible for reimbursement. Autocar puts its owners and customers first, and therefore, the company has generally has not firmly established such a beginning date for reimbursement eligibility, and as of the date of this policy, does not presently anticipate changing this general policy.
Should Autocar determine (as NHTSA permits) that a beginning date is appropriate, Autocar will indicate that date in the specific reimbursement plan for that particular recall. As permitted by 49 C.F.R. 577.11(e), Autocar may not include a reimbursement notification when all vehicles are well within the warranty period, subject to approval by NHTSA.
III. Costs to be Reimbursed
For vehicles, reimbursement will not be less than the lesser of:
- The amount paid by the owner for the remedy that specifically addressed and was reasonably necessary to correct the defect or noncompliance that is the subject of the recall; or,
- The costs of the part(s) for the remedy (to be no more than the manufacturer’s list retail price for authorized part(s)), plus associated labor at local labor rates, miscellaneous fees (such as disposal of waste), and taxes.
For replacement equipment, reimbursement will be the amount paid by the owner for each replacement item (limited to the amount of the retail list price of each defective or noncompliant item that was replaced, plus taxes, where the brand or model purchased by the owner was different than the brand or model that was subject to the recall). If the item of motor vehicle equipment was repaired, the reimbursement provisions identified above for vehicles will apply.
As set forth at 49 C.F.R. 573.13(d)(1), costs incurred by the owner within the period during which Autocar’s original or extended warranty would have provided for a free repair of the defect or noncompliance will not be eligible for reimbursement.
IV. Entity Authorized to Provide Reimbursement
Autocar will directly reimburse owners, unless a specific reimbursement plan is made available for a particular recall, and will encourage owners to pursue requests for reimbursement directly through its Service & Warranties Department to expedite reimbursement, as set forth above in Section II. In whatever manner the request for reimbursement is made, under this Plan or a specific reimbursement plan, the owner will be directed to submit the required documentation, upon which reimbursement eligibility will be determined.
V. Required Documentation
The reimbursement determination will depend upon the information provided by the owner.
As set forth at 49 C.F.R. Part 573.13(d)(4), the owner must submit all of the following information:
- Claimant’s name and mailing address;
- For motor vehicles, the vehicle identification number (or “VIN”), vehicle make, model, and model year;
- For replacement equipment, a description of such equipment or, for tires, the model and size;
- Identification of the applicable recall (either Autocar’s recall number, or NHTSA’s applicable recall campaign number);
- Identification of the owner of the recalled vehicle at the time that the pre-notification remedy was obtained;
- An original receipt for the pre-notification remedy that includes a breakdown of the amount for parts, labor, other costs and taxes, including costs for the replacement item. Where the receipt covers work other than to address the recall or noncompliance, Autocar may require the claimant to separately identify costs that are eligible for reimbursement.
- If the remedy was obtained during the warranty period, documentation indicating that the warranty was not honored or that the warranty repair did not correct the problem related to the recall.
Failure to submit all of the above information may result in denial of the reimbursement request.
VI. Additional Information
The Part 577 required owner notice will provide a toll-free telephone number through which specific information about the reimbursement plan can be requested from Autocar.
As set forth at 49 C.F.R. 573.6, this general reimbursement plan will be incorporated into notifications by reference. Information specific to a particular recall also may be incorporated into the Part 573.6 notification.
VII. Response to Requests for Reimbursement
Autocar will act upon requests for reimbursement as follows:
- Autocar will act upon a claim for reimbursement within 60 days of its receipt. If Autocar denies the claim, Autocar will send a notice to the claimant within 60 days of receipt of the claim that includes a clear, concise statement of the reasons for the denial.
- If a claim for reimbursement is incomplete when originally submitted, Autocar will advise the claimant within 60 days of receipt of the claim of the documentation that is needed and offer an opportunity to resubmit the claim with complete documentation.
Reimbursement shall be in the form of a check from Autocar.
VIII. Miscellaneous
Autocar will make a copy of this plan available to the public, upon request.
As permitted by 49 C.F.R. 573.13(m), Autocar will not reimburse owners for recalls based solely on noncompliant or defective labels.
As set forth at 49 C.F.R. 573.13(n), reimbursement for a pre-notification remedy will not be provided to an owner if, in the case of a motor vehicle or replacement equipment other than a tire, it was bought by the first purchaser more than 15 calendar years before notice is given under 49 U.S.C. 30118(c) or an order is issued under section 49 U.S.C. 30118(b). In the case of a tire, this period shall be 5 calendar years.
Dated: June 1, 2020
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| AUTOCAR | XPEDITOR | 2019 |
11 Associated Documents
Recall Quarterly Report #1, 2020-4
RCLQRT-20V545-5332.PDF 211.136KB
Loading...
Reload document 
Open in new tab
Recall Quarterly Report #3, 2021-2
RCLQRT-20V545-9910.PDF 211.317KB
Loading...
Recall Acknowledgement
RCAK-20V545-5787.pdf 244.749KB
Loading...
Safety Bulletin
RCSB-20V545-8166.pdf 1458.778KB
Loading...
Remedy Instructions and TSB
RCRIT-20V545-9404.pdf 1458.778KB
Loading...
Defect Notice 573 Report
RCLRPT-20V545-2871.PDF 215.299KB
Loading...
Owner Notification Letter(Part 577)
RCONL-20V545-9591.pdf 165.161KB
Loading...
Manufacturer Reimbursement Plan
RMRP-20V545-5185.pdf 613.304KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20V545-4578.pdf 107.088KB
Loading...
Recall Quarterly Report #2, 2021-1
RCLQRT-20V545-5220.PDF 211.237KB
Loading...
Recall Quarterly Report #4, 2021-3
RCLQRT-20V545-1743.PDF 211.426KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V545&docType=RCL
- 【High cost-effective fuse kit】-- The kit includes micro size 50pcs, mini size 160pcs and standard size 90pcs. Three styles of fuses have 11 current specifications (2A /3A / 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A / 30A/ 35A/40A), equipped with a fuse puller.
- 【Reasonable quantity matching】-- According to market research data, we have increased the number of fuses with commonly used current specifications of 10A/ 15A/ 20A/ 25A, and reduced the number of other less-used fuses. The number is reasonable and and the use time of fuses is extended.
- 【Abundant types and precise protection】-- Three different types of fuses are suitable for most vehicles and meet the different needs of consumers. It is recommended that you use the original car fuse to compare with our fuse size or search the car fuse type on the Internet.
- 【Installation Instructions】-- The kit contains fuse installation instructions to help you replace and install the fuse correctly. The fuse kit is suitable for cars/RVs/truck/motorcycles/boats, etc.
- 【High quality, easy to identify】-- The fuse is made of environmentally friendly plastic and zinc alloy. The fuse of each current specification is distinguished by different colors, and the current specification number is marked on the top of each fuse, which is easy to identify.
- Covers 24 commonly used blade fuses: 80pcs Standard: 2A/ 5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A (10PCS of each model ), 96pcs mini: 2A/ 5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A (12PCS of each model ), 96pcs Low Profile Mini: 2A/ 5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A (12 PCS of each model ).
- It is well organized, with a helpful photographic diagram of the fuses locations on the back of the cover. Good assortment of fuse with,variety of sizes that are commonly used in most of vehicles (Cars, Truck, SUV, ATV, UTV, Camper RV, Motorcycles, etc), making this assortment a universal fit for most any job.
- This set comes with Standard & Mini & Low Profile Mini blade fuses, all essential for every American household that owns more than one car. This set really is the best one to get if you are unsure which sizes you should get for your car or if you have multiple cars.
- Winlyn blade fuses made of a high quality zinc alloy, with a transparent cover to protect your vehicles from short circuit and overload.
- The fuses puller is included in the fuses box, help you easily replace the fuse, fuse puller is in the gird of 35 amp low profile mini fuse.
- 【ALL SIZES YOU NEED】The fuses automotive kit covers 182pcs commonly used blade fuses and a fuse puller - 63pcs Standard: 5A/ 7.5A/ 10A/ 15A/ 20A/ 30A/ 40A (9PCS of each model ), 56pcs mini: 5A/ 7.5A/ 10A/ 15A/ 20A/ 30A/ 40A (8PCS of each model ), 63pcs Low Profile Mini: 5A/ 7.5A/ 10A/ 15A/ 20A/ 30A/ 40A (9PCS of each model ).
- 【HIGH QUALITY】The auto fuse is made of Premium zinc alloy terminals for corrosion resistance and enhanced conductivity. The fuse assortment comes with a storage box, easy to store and carry.
- 【EASY TO IDENTIFY】The blade fuses of each current specification are distinguished by different colors, also clearly marked with amperage, which is easy to identify. Please use the right amp fuse to protect the vehicle and electronic equipment from short-circuit/overload.
- 【WIDE APPLICATION】variety of sizes that are commonly used in most of vehicles. This fuse kit can be used on Cars, Truck, SUV, ATV, UTV, Camper RV, Motorcycles, etc.
- 【QUALITY COMMITMENT】We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We will reply within 24 hours and do our utmost to ensure your satisfaction.
- The blade fuses are clearly marked with amperage and color coded for easy identification
- Available in amperage ratings of 2A to 40A (rated at 32 volts), you could always find one that fits your auto
- Includes both standard size & mini size; Perfect for Car/RV/Truck/Motorcycle/Boat
- Premium zinc alloy terminals for corrosion resistance and enhanced conductivity
- Comes with a fuse puller, makes replacing the fuse easier and quicker
- 【Great Protection】:The Standard Car Fuse Kit includes 10 current specifications (2A /3A / 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A/40A). These small blade fuse protect our vehicles from wiring damage, electrical overload, and potential fires. With superior conductivity, corrosion resistance and high current sensitivity our fuses have tested to specification and is guaranteed to work as designed.
- 【High-Quality Fuses】: Made of a high quality zinc alloy standard and an insulating plastic with a transparent cover, these blade fuses to protect your vehicle from short circuit and overload. The blades are sturdy and won’t break when pulling out.
- 【Wide Application】: Perfect or replacing the blown fuses at any time. This ATC/ATO/APR/ATS fuse kit is widely used in automobiles, trucks, VUS, VTT, UTV, RV, camper, motorcycles, golf carts, ships, snow motorcycles and for most general DC electrical devices including dash camera, radio, lighting, flickering, etc. Highly recommended to check the right size of automotive car fuse before making a purchase.
- 【Easy Use and Identify】: Transparent appearance for quick inspection of fuse conditions, each color of fuse is a specification the Standard Blade Car Fuses Assortment can be easily identified by their color-coded plastic housings and the carved amp rating figures on the top. The car spare fuse kit is packaged in a durable plastic package to protect the car Standard fuse and provide easy transportation and organization.
- Covers 30 commonly used blade fuses: 100pcs ATO/ATC/ATS/APR Standard Fuses: 2A/ 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A (10PCS of each model ), 120pcs ATM Mini Fuses: 2A/ 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A (12PCS of each model ), 120pcs Low Profile Mini Fuses: 2A/ 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A/ 40A (12PCS of each model ).
- The fuses are (industry) color coded and well organized, with a helpful photographic diagram of the fuses locations on the back of the cover.
- This set comes with Standard & Mini & Low Profile Mini blade fuses. Good assortment of fuse with,variety of sizes that are commonly used in most of vehicles (Cars, Truck, SUV, ATV, UTV, Camper RV, Motorcycles, etc), making this assortment a universal fit for most any job.
- Winlyn blade fuses made of a high quality zinc alloy, with a transparent cover to protect your vehicles from short circuit and overload. This set really is the best one to get if you are unsure which sizes you should get for your car or if you have multiple cars.
- The fuses puller is included in the fuses box, help you easily replace the fuse, fuse puller is in the gird of 40 amp low profile mini fuse.
- Easy Identification: Fuses assortment kit made of a high-quality zinc alloy, with a transparent cover and color-coded.
- 8 Most Common Standard Fuse: 1A/3A/5A/10A/15A/ 20A/30A/40A.
- All Sizes You Need: The package contains 80pcs car fuse and 2pcs fuse puller.
- Wide Applications: Fuses kit fits most vehicles like cars, trucks, RV accessories, marine, travel trailers, and camping accessories for travel trailers.
- A fuse puller is included in the fuse box to help you change fuses easily.
- [ALL SIZES YOU NEED]: Covers 20 commonly used blade fuses, 150pcs Standard: 2A /3A / 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A (15PCS of each model ), 210pcs mini: 2A/ 3A/ 5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A/ 35A (21PCS of each model ).
- [EXCELLENT QUALITY]: Riseuvo blade fuses made of premium materials, fast and precise fusing current to protect your car from excessive current.
- [EASY INSTALLATION]: Riseuvo fuses are packaged in two plastic box with description in the lid to let you know what is in the box.
- [WIDELY APPLICABLE]: The Riseuvo Fuse kit is suitable for Car Automotive Rv etc.
- [FUSE PULLER]: The fuses puller is included in the mini fuses box, help you easily replace the fuse, fuse puller is in the gird of 35 amp mini fuse
- Package Includes: The assortment kit includes 4 types of fuses, Standard blade fuse( 5A,7.5A,10A,15A,20A,25A,30A), Mini blade fuse( 5A,7.5A,10A,15A,20A,25A,30A), Low Profile automotive fuses(20A,30A,40A,50A,60A)and Tall profile box shaped fuse(20A,30A,40A,50A,60A), Totally 250Pcs + 1Pcs fuse puller.
- Material: The blade fuses is made of high-quality zinc alloy, which has strong conductivity and corrosion resistance, and can quickly and accurately fuse the current to protect your car from excessive current and short circuit.
- Easy to identify: The car fuses assortment kit can be easily identified by its color-coded plastic case and the rated amperage engraved on the top. All fuses are packaged in reusable boxes for easy management.
- Multifunctional: It is very suitable for replacing blown fuses at any time. It is strongly recommended to check the correct size of automobile fuses before buying.
- Application: Fits most vehicles like car, truck, marine,RV, Boat, Truck.
- Easy Identification: Made of a high quality zinc alloy, with a transparent cover and color coded.
- 14 Most Common Fuses: Standard and Mini. (5A/ 7.5A/ 10A/ 15A/ 20A/ 25A/ 30A)
- Wide Applications: Fits most vehicles like car, truck, marine, SUV, travel trailer and other vehicles.
- Note: Please use the right amp fuse to protect the vehicle and electronic equipment from short-circuit/overload.
- ll Sizes You Need: The package contains 140pcs fuse and 2pcs fuse puller - 70pcs standard fuse and 70pcs mini fuse. (10pcs of each AMP)
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.