“This site contains affiliate links for which OEMDTC may be compensated” |
August 10, 2020 NHTSA CAMPAIGN NUMBER: 20V468000
Front Seat Wiring Harnesses Routed Incorrectly
If the wiring harness is damaged, the side air bag within the seat may deploy unexpectedly or not deploy as designed in the event of a crash, increasing the risk of injury to vehicle occupants.
NHTSA Campaign Number: 20V468
Manufacturer Jayco, Inc.
Components ELECTRICAL SYSTEM, AIR BAGS, SEATS
Potential Number of Units Affected 545
Summary
Jayco, Inc. (Jayco) is recalling certain 2020-2021 Jayco Melbourne, Melbourne Prestige and Entegra Qwest motorhomes built on Sprinter chassis and equipped with swivel seats. The wiring harnesses for the front seats may have been routed incorrectly and could become jammed and damaged in the swivel seat frames.
Remedy
Jayco will notify owners, and Mercedes-Benz Sprinter dealers will inspect the wire harness routing for both front seats and will repair the wiring and add clips or cable ties as needed, free of charge. The recall began August 21, 2020. Owners may contact Jayco customer service at 1-800-517-9137.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Sprinter Chassis Recall – Wiring Harness for the Front swivel seats
Bulletin Type: | Safety Recall | Publication Date: | August 2020 | |
Bulletin #s: | 20V-468 US
2020-367 Canadian |
Make: | Jayco Motorized | |
Job Code: | NA | Models: | Qwest
Melbourne Melbourne Prestige |
|
Flat Rate: | NA | |||
Model Years: | 2020-2021 |
Incident: | The electric cables in the front swivel seats wiring harness require inspection for proper securement. Damaged cables may adversely affect the operation of the side airbag within the seat. The airbag could deploy inadvertently or not deploy as designed in the event of a crash, increasing the risk of injury to vehicle occupants. |
Affected Units: | Certain 2020 – 2021 Melbourne, Melbourne Prestige and Qwest Class C motorhomes |
Remedy: | Inspection for the correct routing of the seat wiring harness and installation of clips/ cable ties when required. An authorized
Mercedes-Benz Sprinter dealer will conduct the Recall Remedy at no charge to current owner. To locate an authorized Dealer see:www.mbvans.com/sprinter/shopping-tools/find-a-dealer
|
Jayco’s sole obligation under our limited warranty is to repair or replace defective materials and/or workmanship deemed our responsibility as determined by Jayco in our sole discretion. Jayco reserves the right to use new and/or remanufactured parts or materials of similar quality to complete any work, and to make parts and/or design changes as appropriate without notice to anyone. Jayco designs and/or materials changes are done without obligation to incorporate such changes in previously manufactured product. Jayco makes every reasonable effort to ensure field remedies will not adversely affect performance and/or safety of the unit. This field remedy is not intended to extend to future performance of this RV, or any of its materials, components or parts beyond the standard warranty period. The RV owner’s obligation to notify Jayco, or one of its independent, authorized dealers, of a claimed defect does not modify any obligation placed on the RV owner to contact Jayco directly when attempting to pursue remedies under state or federal law. Jan. 2019. | |
903 South Main Street • P.O. Box 460 • Middlebury, IN 46540 |
20V-468 2020-367 MB Sprinter Chassis –Seat wiring harness
August 2020
Safety Recall: 20V-468
August 21,2020
IMPORTANT SAFETY RECALL
This Notice Applies to Your Recreational Vehicle «vin»
Dear Valued Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco has decided that a defect, which relates to motor vehicle safety, exists in certain Model Year 2020- 2021 Melbourne, Melbourne Prestige and Qwest Class C Motorhomes built on a Sprinter Chassis equipped with front swivel seats.
Reason for this recall
The front swivel-seat frame may damage the electric cables in the seat wiring harness. If this were to occur, the operation of the side airbag in the seat could be adversely affected. The side airbag could deploy inadvertently or not deploy as designed in the event of a crash, increasing the risk of injury to vehicle occupants.
Recall Remedy
An authorized Mercedes-Benz Sprinter dealer will inspect the wire harness routing for both front seats and will repair the wiring and add clips or cable ties as needed, free of charge. While the minimum repair time is approximately 2 hours, the Sprinter dealer can provide you with a better estimate of the overall time for your appointment.
What we need you to do
Please contact a Mercedes-Benz Sprinter dealer as soon as possible, to schedule an appointment for the Recall Remedy. To locate an authorized Sprinter Dealer see: www.mbvans.com/sprinter/shopping–tools/find–a–dealer. Please mention you are scheduling an appointment under Recall Campaign # 2020070011 and provide the 17-digit Vehicle Identification Number (VIN) noted at the top of this notification.
If you had this repair completed prior to receipt of this recall notice, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall.
If you take your recreational vehicle to your dealer on the agreed service date and the dealer does not remedy this condition on that date or within three (3) days, please contact our Customer Service Department at 800517-9137. If you are unable to get this safety defect remedied without charge and/or within a reasonable amount of time after contacting your dealer and Jayco customer service, you may want to contact NHTSA. To submit a written complaint contact the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800424-9153): or go to https://www.safercar.gov.
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We certainly regret this inconvenience; however, your safety is our most important priority.
Sincerely,
Compliance Management
Safety Recall: NHTSA: 20V-468
Transport Canada: 2020-367
August 12, 2020
IMPORTANT SAFETY RECALL
Dear Valued Dealer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco has decided that a defect, which relates to motor vehicle safety, exits in certain Model Year 2020-2021 Entegra Qwest, 2020-2021 Jayco Melbourne and Melbourne Prestige Class C Motorhomes built on a Mercedes-Benz Sprinter chassis.
Reason for this recall
The electric cables in the front- swivel seats (2) wiring harness require inspection for proper routing/ securement. Improper routing/securement may lead to damage of the cables by the seat frame when moved. The operation of the side airbag in the seat may cause the side airbag to deploy inadvertently or not deploy as designed in the event of a crash, increasing the risk of injury to vehicle occupants.
Recall Remedy
An authorized Mercedes-Benz Sprinter dealer will check the routing / securement of the cables and add clips / cable ties, as necessary The Recall remedy is free of charge. To locate an authorized Dealer, please see: www.mbvans.com/sprinter/shopping-tools/find-a-dealer.
All pertinent information regarding this Chassis recall is available under the Applications > Recalls section of our website. If you need further assistance, please Contact the appropriate Customer Service Group at 800-517-9137.
What we need you to do
Our records show the following motorhome affected by this Chassis recall and is part of the current inventory at your Dealership.
VIN
Federal law requires the Recall Remedy completed on this unit prior to customer delivery.
If you sold this unit recently, please contact the owner immediately to inform them of this recall. In addition, please register this unit by submitting the Warranty Registration information. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We certainly regret this inconvenience; however, our Customers’ safety is our most important priority.
Sincerely,
Compliance Management
Jayco Motorized
6 Affected Products
Vehicles
MAKE | MODEL | YEAR |
ENTEGRA | QWEST | 2020-2021 |
JAYCO | MELBOURNE | 2020-2021 |
JAYCO | MELBOURNE PRESTIGE | 2020-2021 |
6 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-20V468-4825.pdf 634.056KB
Recall 573 Report – Amendment 1
RCLRPT-20V468-2102.PDF 212.798KB
Remedy Instructions and TSB
RCRIT-20V468-9701.pdf 682.198KB
Defect Notice 573 Report
RCLRPT-20V468-1002.PDF 212.829KB
Manufacturer Notices(to Dealers,etc)
RCMN-20V468-4142.pdf 142.699KB
Recall Acknowledgement
RCAK-20V468-2789.pdf 245.347KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V468&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- High temp Wire Harness Automotive Cloth Tape with excellent sound and rattle dampening performance. Lessens coil whining and lasts well against elevated temperatures (-40℉ - 257℉).
- Sports a race-spec heavy-duty bundling performance but cleanly tears with just bare hands, EMPOWERING average car owners with LITTLE TO NO EXPERIENCE in automotive maintenance to achieve PROFESSIONAL-GRADE results in function and form.
- This Wire Loom Tape features an extremely strong adhesive but does not turn into a messy goo. Rated to last up to 6 years and can easily get you through 150k miles of mileage.
- Its bi-directional weave makes it puncture-resistant and abrasion and corrosion-resistant. This automotive felt tape preserves cables in their pristine condition.
- This engine tape wrap is similar, if not better, in thickness, tensile strength and looks with OEM wire harness tapes. Extra-sticky adhesive enables users to bundle hard-to-reach cables quickly.
- STRONG CLOTH ADHESIVE - Made of PET Cloth base, the friction harness tape has a strong anti-peeling performance and wont tear during use. Provides good flexibility to enhance comfort when bonding cables together. The adhesive of this tape holds up over time and offers a firm grip. Does not contain hazardous substances.
- WIRE LOOMS IN AUTO - WOD friction tape is widely used in the automotive industry. It helps to hold the cables and wires together while providing protection against moisture, vibration, and other environmental factors that can cause damage to the wires over time.
- HIGH TEMP AND NOISE REDUCTION - WOD black cloth tape is preferred for electricians, handymen, mechanics, and HVAC due to its temperature resistance capability. It can be applied at -40 ℉ environments and perform at up to 221 ℉, ideal for engine parts exposed to heat or cold, such as batteries, wires, air conditioning, or car audio installation.
- EASY TO TEAR BY HAND - The Friction Tape is HAND-TEARABLE and made of cloth fabric that ensures the material is ripped with your fingers and enhances the application process, leaving no residue behind if removed. It has a low skill and mastery requirement, so everyone can use it, from beginners to professionals!
- WOD Tape stands as a top-selling brand on Amazon, dedicated to providing only the highest quality tape products. As a USA-based small business, our commitment to excellence extends to both our products and customer service.
- Widely application: The material of wire harness cloth tape is soft and corrosion-resistant, which is suitable for the use of wire harness in automobile interior noise reduction part, such as wire harness of the dashboard, main harness wound and applied for wire joint and wire fixing. It can also sort out home appliance wiring and more.
- Easy to tear. Just stick one end of tape to cable, start pulling and wrapping onto the cable and tear it gently. No need scissors and other tools. You can decide the length of the wire cloth tape according to you needs.
- Professional cloth tape material: It is made of polyester non-woven fabric and strong acrylic pressure sensitive adhesive. High viscosity, high temperature resistance ( -40°F ~ 221°F ), well seal and excellent flexibility.
- Excellent performance: The wiring harness tape maintains features high adhesive force, good noise reduction, hand tearable and heat insulation performance, and wear resistance. It is suitable for electrical automotive engine and circuit maintenance to achieve the purpose of insulation protection.
- Specification: A set of 5 rolls wire harness cloth tap. SIZE: Each roll black electrical harness tape is 50 FT long and 3/4 inch wide. It is work for your different daily needs in diversified use scenarios.
- Harness Cloth Tape Application: Suitable for the use of internal wiring harness of automobiles and can reduce the noise. Such as the wire harness of the dashboard.
- Harness Cloth Tape Material: These wiring harness tape are made of high quality cotton flannel and strong adhesive glue.
- Harness Cloth Tape Features: 1High Adhesive Force 2 Noise Resistance Well 3 Strong Abrasion Resistance 4 Hand Tearable 5 Strong Chemical Resistance.
- Harness Cloth Tape Size: Length 15 m, Width 15 mm.
- Car harness cloth tape is very convenient to use; just wrap the tape around the wire and gently tear it apart. No scissors or other tools are needed. The length of the tape can be determined according to your needs.
- Enough to Use: you will get 2 rolls of wire harness tapes in the package, measuring approx. 2 inches x 49.2 ft/ 50 mm x 15 m for each; The proper size and sufficient length is suitable for your different daily needs in many use scenarios
- Safe Material: the wire harness tape is made of polyester non woven fabric material, quality pressure sensitive adhesive, high temperature and wear resistance, which can be applied for a long time
- Nice Performance: the adhesive fabric tape has nice noise reduction and heat insulation performance, very suitable for automotive engine and circuit maintenance to achieve the purpose of insulation protection
- Easy to Use: the wire loom tape is simple and convenient to use, just wrap the tape on the wire and tear it gently, and you can decide the length of the tape according to your own needs
- Scope of Usage: the cloth electrical tape is suitable for automobile interior noise reduction part, such as instrument panel harness and main harness wound, and can also be applied for wire joint and wire fixing
- OEM-GRADE AUTOMOTIVE WIRE LOOM TAPE that’s specifically designed for high temp wirings. Our wiring harness tape prevents oil build-up, abrasion, and contains 10 rolls at 50 Feet, for a total of 500 feet.
- HEAVY-DUTY. With a tensile strength of 160lb/in, this cloth tape automotive withstands daily wear and tear, extreme heat, and humidity for up to 12 years without weakening or unraveling.
- RESIDUE-FREE. With a silicone adhesive, our fabric electrical tape will not leave a messy goo upon removal. This heat resistant wire loom tape prevents coil rattling, making it an essential high temp automotive tape for those who want silent and PRO-GRADE cable wrap results.
- EXCELLENT THERMALS. Operating at -40°F to 257°F, this high temp electrical tape can also be used under the hood, PC, or on high heat electrical wire harness wrap.
- INSTALLS CLEANLY. Made from fabric-polycarbonate composite, this automotive electrical tape can torn with bare hands, while being stretchy for accessing hard-to-reach areas.
- Wire Harness Cloth Tape Application: Automotive wire loom tape is widely used in the area near the engine, battery or on normal wire harness and also suitable for the use of wire harness in automobile interior noise reduction part, such as instrument panel harness. Wrap any wires that need to be repaired
- Temperature Resistance: Electrical wiring harness cloth tape made of high-quality polyester non-woven fabric and strong acrylic pressure sensitive adhesive, with high adhesive Force, abrasion resistance and high-temperature resistance (-40℉- 225℉)
- Easy to Tear: Oyviny automotive cloth tape is easy to tear and convenient to use, just wrap the harness cloth tape around the wiring harness and gently tear it apart, No tools required! You could tear the tape at any length according to your need
- Good Performance: Automotive wire loom harness cloth tape is wear-resistant and with strong anti-aging, which can be applied for a long time. It is also suitable for automotive circuit and engine maintenance to achieve the effect of insulation protection
- Harness Cloth Tape Size: Package comes with 5 rolls 25mm x 15m electrical wire harness tape. Each roll radio wiring harness cloth tape is 1 inch width and 50 feet length. The size and length is suitable for your daily use
Last update on 2024-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.