Jack Stand May Collapse Under Load – Hyper Tough 2 Ton Jack Stands

“This site contains affiliate links for which OEMDTC may be compensated”

July 31, 2020 NHTSA CAMPAIGN NUMBER: 20E053000

Jack Stand May Collapse Under Load

A sudden drop of the jack stand can increase the risk of injury to persons nearby or under the lifted vehicle.

 

NHTSA Campaign Number: 20E053

Manufacturer Walmart

Components EQUIPMENT

Potential Number of Units Affected 13,956

 

Summary

Walmart is recalling certain individual Hyper Tough 2 Ton Jack Stands, model 2TJS, sold under part number 0085001232400. The jack stands may not be able to support the rated load without collapsing unexpectedly.

 

Remedy

Walmart will notify owners, and provide a full refund. The recall began October 16, 2020. Owners may contact Walmart at 1-800-925-6278.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


IMPORTANT SAFETY RECALL

Dear Customers,

This notice is in accordance with the National Traffic and Motor Vehicle Safety Act for NHTSA Recall Campaign Number 20E053000.

Walmart Inc. has decided that a defect relating to motor vehicle safety. exists in certain Hyper Tough Jack Stands Model 2T JS. Notice of this recall can also be found at corporate.walmart.com/recalls, twitter com/walmarthelp, recall§ gov. and on digital monitor displays in select stores.

 

What is the Condition?

For Hyper Tough Jack Stands Model 2T JS there is a potential for the ratcheting bar to fail, which could result in the collapse of a vehicle being supported by the jack stand, potentially resulting in injury to persons near or under the lifted vehicle.

 

Impacted Product

This recall is for Hyper Tough Jack Stands with the Model number 2TJS sold in Walmart Stores from November 2019 to July 2020. Similar products contain different model numbers. The model number 2T JS can be found on the product’s labeling above the barcode as shown in the picture below.

 

Model Number Label:

 

Additional Product Images:

 

What Should You Do?

Consumers should immediately stop using the recalled item and return it to Walmart for a full refund. Contact Walmart at 800 925 6278 from 7 a.m. through 9 p.m. CT any day or online at www.walmart.com and click on “Product Recalls” for more information.

If you believe Walmart has failed to remedy this defect without charge, or within a reasonable amount of time, you may submit a written complaint to:

Administrator
National Highway Traffic Safety Administration
1200 New Jersey AVE SE
Washington, DC 20590

You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov

Thank you for being a Walmart customer. If you have questions or concerns regarding this product recall, please contact Walmart at 800-925-6278.

Sincerely.

Walmart Inc.

 


1 Affected Product

Equipment

BRAND PART NO. PRODUCTION DATES
HYPER TOUGH 2 TON JACKSTAND

 


8 Associated Documents

Recall 573 Report – Amendment 3

RCLRPT-20E053-6939.PDF 213.978KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.96 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-20E053-7686.pdf 388.788KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [379.68 KB]

 


Recall Quarterly Report #2, 2021-1

RCLQRT-20E053-7356.PDF 211.22KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.27 KB]

 


Recall Quarterly Report #1, 2020-4

RCLQRT-20E053-3279.PDF 211.124KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.18 KB]

 


Recall 573 Report – Amendment 2

RCLRPT-20E053-6590.PDF 213.958KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.94 KB]

 


Recall Acknowledgement

RCAK-20E053-4767.pdf 246.526KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [240.75 KB]

 


Defect Notice Recall 573 Report

RCLRPT-20E053-5738.PDF 212.981KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [207.99 KB]

 


Recall Quarterly Report #3, 2021-2

RCLQRT-20E053-0040.PDF 211.303KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.35 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20E053&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
SaleBestseller No. 1
BIG RED T43202 Torin Heavy Duty Steel Jack Stands: 3 Ton (6,000 lb) Capacity Car Lifting Stand,1 Pair (Not Suitable for SUV,Truck)
  • Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support
  • This car jack stand is constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles
  • The pair of jacks for car has adjustable height ranging from 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity
  • Multi-position ratchet bar of this 3 ton car stand has a sawtooth design, allowing for quick height adjustments that lock into place
  • Features a large saddle surface area for better contact with the load being supported; Tested for reliability and safety to meet ASME standards. Double locking pawl and tooth design for extra protection
Bestseller No. 2
Amazon Basics Steel Jack Auto Stands, 3 Ton Capacity, 1 Pair, Black and Red
  • Pair of 3-ton jack stands with 6,000-pound capacity
  • Self-locking ratchet means no locking key is necessary; meets ASME PASE-2014 Safety Standard for Portable Automotive Service Equipment
  • Stand can be raised or lowered to the height needed; self-locking ratchet for ease of use
  • Durable steel frame with rustproof coating; easy-to-read weight capacity
  • Backed by an Amazon Basics limited 1-year warranty
SaleBestseller No. 3
Torin AT43005AB Steel Heavy Duty Jack Stands: Double Locking Pins, 3 Ton (6,000 lb) Capacity, Black, 1 Pair (2 Pack)
  • Double locking jack stands are used to support your vehicle after lifting with a jack.; Features a large saddle surface area for better contact with the load being supported
  • Constructed of high-grade forged steel with a welded frame design for durability; Handles a wide range of vehicles including small cars, SUVs, and light duty trucks
  • Adjustable lifting height range from 11-5/16" to 16-7/8" with a 3 ton (6,000 lb) load capacity
  • Multi-position ratchet bar features a sawtooth design, allowing for quick height adjustment when locking into place
  • Wide pyramid foot base measures 7.95" x 7.2"; Large foot base provides added strength and stable support
SaleBestseller No. 4
BIG RED AT42002R Torin Steel Car Jack Stands: 2 Ton (4,000 lb) Capacity, Red, 1 Pair
  • Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support
  • Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks
  • Adjustable height ranges from 10-13/16" to 16-9/16" with a 2 ton (4,000 lb) load capacity
  • Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place
  • Features a large saddle surface area for better contact with the load being supported; Tested for reliability and safety to meet ASME standards
SaleBestseller No. 5
Pro-Lift Heavy Duty 6 Ton Jack Stands Pair - Double Locking Pins - Handle Lock and Mobility Pin for Auto Repair Shop with Extra Safety
  • Sturdy stamped Steel Construction with 6 ton capacity
  • High quality cast ductile iron ratchet bar. Lifting range from 16 in. to 23-1/2 in
  • Double locks mechanism with both handle locks and mobility pin
  • Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
  • Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
Bestseller No. 6
BIG RED AT42002R-3 Torin Jack Stands (1 Pair): Exceptional Use for Cars, Sedans, and Most Automobiles - 2 Ton (4,000 lb.) Capacity, Red
  • Specifications. 2 ton (4,400 lb.) capacity for single jack stand; Lifting range from min 10.8 " to max 16.5"; Net weight: 10.5 lb.
  • Safety Top Surface. Our heavy-duty jack stands offer perfect load support with a large concave top saddle, relieving tire pressure and providing a safe working space for vehicle repairs.
  • Durable Welded Frame. The car jack stands are meticulously crafted from durable mild steel, featuring a complete welded frame design that ensures optimal strength and seamless performance. The red powder coating provides effective rust prevention, while the paint is expertly applied with an even and glossy finish.
  • Adjustable Sawtooth Design. Our floor jack stand features a multi-position ratchet bar made of ductile iron, designed with a sawtooth style for precise adjustment and secure engagement. The hand self-locking mechanism ensures solid load support and guarantees your safety.
  • Stable Base and After-sales. Our jack stand features a wide pyramid foot base for enhanced strength and stability, offering a sturdy build without excessive weight. Includes a limited 1-year manufacturer warranty. For any inquiries, please don't hesitate to contact us. We are committed to providing prompt solutions to meet your needs.
Bestseller No. 7
Jack Boss Jack Stands Low Profile 2 Ton(4400 LBs) Lifting Car Stand, Fit Use for Cars Automotive Sedans, 2 Pack
  • Specifications:2 ton (4,400 lb) capacity for single jack stand; Lifting range from min 9.8 " to max 15"; Net weight: 10.5 lb
  • Durable Welded Frame: The car jack stands are meticulously crafted from durable mild steel, featuring a complete welded frame design that ensures optimal strength and seamless performance. The red powder coating provides effective rust prevention, while the paint is expertly applied with an even and glossy finish.
  • Safety Top Surface: Our heavy-duty jack stands offer perfect load support with a large concave top saddle, relieving tire pressure and providing a safe working space for vehicle repairs.
  • Adjustable Sawtooth Design: Our floor jack stand features a multi-position ratchet bar made of ductile iron, designed with a sawtooth style for precise adjustment and secure engagement. The hand self-locking mechanism ensures solid load support and guarantees your safety.
  • Stable Base and After-sales: Our jack stand features a wide pyramid foot base for enhanced strength and stability, offering a sturdy build without excessive weight. It includes a limited 1-year manufacturer warranty. For any inquiries, please don't hesitate to contact us. We are committed to providing prompt solutions to meet your needs.
SaleBestseller No. 8
TCE 3 Ton (6,000 LBs) Capacity Double Locking Steel Jack Stands, 2 Pack, Blue, AT43002AU
  • Double locking jack stands help support vehicles after lifting with a jack; Handles a wide range of vehicles including small cars,ATV's, UTV's, and more
  • Features a lifting range of 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity; Saddle has a large surface area that provides better contact with the load being supported
  • Constructed with heavy-duty steel and is industrial welded for quality and long term durability; Removable locking support pin provides added security that increases safety by 200%
  • Wide pyramid style foot base provides added strength; Large foot base delivers additional stability and measures 7-11/16" x 6-7/8"
  • Multi-position forged iron ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place; Meets ASME safety standards and includes a limited 2 year manufacturer warranty
SaleBestseller No. 9
Pro-LifT T-6903D Double Pin Jack Stands - 3 Ton
  • Sturdy stamped Steel Construction with 3 ton capacity
  • High quality cast ductile iron ratchet bar
  • Double locks mechanism with both handle locks and mobility pin
  • Height adjustment mechanism allows smooth upward movement while release handle locks and mobility pin
  • Meets or exceeds ANSI/PALD standards. Ideal for home, Auto, truck service, farm, and shop use
Bestseller No. 10
BIG RED AT43202BR Torin Steel Jack Stands: 3 Ton (6,000 lb) Capacity, Black, 1 Pair
  • Lightweight jack stands are used to support your vehicle after lifting with a jack; Wide pyramid foot base provides added strength and stable support
  • Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks
  • Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place
  • Features a large saddle surface area for better contact with the load being supported; Tested for reliability and safety to meet ASME standards
  • Adjustable height ranges from 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity

Last update on 2024-04-14 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...