| “This site contains affiliate links for which OEMDTC may be compensated” |
July 2, 2020 NHTSA CAMPAIGN NUMBER: 20V390000
Corroded Modulator Valve May Cause Brake Pull
Brakes that pull to one side during automatic braking events may cause a sudden change in vehicle direction, increasing the risk of a crash.
NHTSA Campaign Number: 20V390
Manufacturer Daimler Trucks North America LLC
Components SERVICE BRAKES, AIR
Potential Number of Units Affected 164,317
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2021 Freightliner Cascadia tractor trailers. The single brake modulator valve may be affected by chemical corrosion which can slow down the release timing and cause the brakes to pull to the affected side during automatic braking events.
Remedy
DTNA will notify owners, and dealers will replace the front left and right single brake modulator valves will be replaced and spacers added, free of charge. The recall began August 28, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-855.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
Daimler Trucks
North America LLC
March 2021
FL855
Interim Recall Notice
NHTSA #20V-390
IMPORTANT SAFETY RECALL
See enclosed VIN list
Subject: Braking System Platform Single Modulator Valves
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division, has decided that a defect which relates to motor vehicle safety exists on specific Model Year 2017-2021 Freightliner Cascadia vehicles manufactured March 8, 2016, through June 25, 2020.
On certain vehicles, chemical corrosion could affect the functionality of the single brake modulator valve, which may result in slow release timing of brakes on the affected side. A slow release of the brake on one side during an active brake request (i.e. automatic braking events), could lead to a brake pull resulting in a sudden change in vehicle direction due to uneven braking on the front axle, increasing the risk of a motor vehicle crash. Regular service brakes are not affected.
This is the first of two notices you will receive regarding this subject. This letter is to inform you of an upcoming Recall to correct the issue noted above. Daimler Trucks is currently securing replacement parts. There is no action for you to take at this time.
The second notice will inform you when the final remedy is available. When you receive the second notice, please contact your authorized Daimler Trucks North America dealer to schedule the Recall for your vehicle.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days.
If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimler.com. For other concerns, you may contact the Customer Assistance Center at (800) 385-4357. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
REF #: ICI20-027
Effective: 09/02/2020
Release: 09/02/2020
SUBJECT: FL855 – Limited Parts Availability
This letter is to inform you that due to initial kit availability, the vehicle population in this Recall Campaign will be released in phases over a planned six-month period. Units in each phase will be prioritized based on vehicle age, miles, and corrosion factors. Please wait to perform the repair until the vehicles’ phase is released.
DO NOT OVERSTOCK KITS, AND DO NOT PERFORM ON VEHICLES THAT ARE NOT YET ACTIVE IN OWL.
You must confirm a vehicle displays FL855 on the OWL Coverage Info screen before proceeding.
If you have questions or need further information, contact the Warranty Campaigns Department by submitting an inquiry through the WSC Link on DTNAConnect.
Daimler Trucks
North America LLC
Recall Campaign
September 2020
FL855A
NHTSA #20V-390
Transport Canada #2020-305
Subject: Braking System Platform Single Modulator Valves
Models Affected: Specific Model Year 2017-2021 Freightliner Cascadia vehicles manufactured March 8, 2016, through June 25, 2020.
General Information
IMPORTANT: Due to parts availability ,this campaign will be released in phases. The phase will be determined based on vehicle age, vehicle miles, and corrosion factors. You must confirm a vehicle displays FL855 on the OWL Coverage Info screen before proceeding.
PLEASE DO NOT OVERSTOCK KITS, AND DO NOT PERFORM ON VEHICLES THAT ARE NOT YET ACTIVE IN OWL.
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division, has decided that a defect that relates to motor vehicle safety exists on the vehicles mentioned above.
On certain vehicles, chemical corrosion could affect the functionality of the single brake modulator valve, which may result in slow release timing of brakes on the affected side. A slow release of the brake on one side during an active brake request (i.e. automatic braking events), could lead to a brake pull resulting in a sudden change in vehicle direction due to uneven braking on the front axle, increasing the risk of a motor vehicle crash. Regular service brakes are not affected.
The front left and right single brake modulator valves will be replaced and spacers added.
There are approximately 187,646 vehicles involved in this campaign.
Additional Repairs
Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale or delivery of a vehicle.
Owners may be liable for any progressive damage that results from failure to complete campaigns within a reasonable time after receiving notification.
Work Instructions
Please refer to the attached work instructions. Prior to performing the campaign, check the vehicle for a completion sticker (Form WAR260).
Replacement Parts
Replacement parts are now available and can be obtained by ordering the kit number listed below from your facing Parts Distribution Center.
If our records show your dealership has ordered any vehicle(s) involved in campaign number FL855, a list of the customers and vehicle identification numbers will be available on DTNAConnect. Please refer to this list when ordering parts for this recall.
Table 1 – Replacement Parts for FL855
IMPORTANT: Due to parts availability ,this campaign will be released in phases. The phase will be determined based on vehicle age, vehicle miles, and corrosion factors. You must confirm a vehicle displays FL855 on the OWL Coverage Info screen before proceeding.
PLEASE DO NOT OVERSTOCK KITS, AND DO NOT PERFORM ON VEHICLES THAT ARE NOT YET ACTIVE IN OWL.
| Campaign Number | Kit Number | Part Description | Part Number | Qty. per Kit |
| FL855A | 25-FL855-001 | SOLENOID,ABS MODULATOR VALVE,
PAINTED |
25-FL855-000 | 2 ea |
| SPACER-AL,.375 ID.75 O | 23-12240-025 | 4 ea | ||
| SCREW-HEX FLANGE,M8X1.25X90 | 23-14064-090 | 4 ea | ||
| WASHER-FLAT,STEEL,HARDENED,3/8 IN | 23-09114-002 | 4 ea | ||
| NUT | N913023 008003 | 4 ea | ||
| N/A | BLANK COMPLETION STICKER | WAR260 | 1 ea |
Table 1
Removed Parts
U.S. and Canadian Dealers, please follow Warranty Failed Parts Tracking shipping instructions for the disposition of all removed parts. Export distributors, please destroy removed parts unless otherwise advised.
Labor Allowance
Table 2 – Labor Allowance
| Campaign Number | Procedure | Time Allowed (hours) | SRT Code | Corrective Action |
| FL855A | Replace front brake modulator valves | 1.3 | 996-R107A | 12-Repair Recall/Campaign |
Table 2
IMPORTANT: When the Recall has been completed, locate the base completion label in the appropriate location on the vehicle, and attach the red completion sticker provided in the recall kit (Form WAR260). If the vehicle does not have a base completion label, clean a spot on the appropriate location of the vehicle and first attach the base completion label (Form WAR259). If a recall kit is not required or there is no completion sticker in the kit, write the recall number on a blank sticker and attach it to the base completion label.
Claims for Credit
You will be reimbursed for your parts, labor, and handling (landed cost for Export Distributors) by submitting your claim through the Warranty system within 30 days of completing this campaign. Please reference the following information in OWL:
- Claim type is Recall Campaign.
- In the Campaign field, enter the campaign number and appropriate condition code (FL855-A).
- In the Primary Failed Part Number field, enter 25-FL855-000.
- In the Parts field, enter the kit number as shown in the Replacement Parts Table.
- In the Labor field, first enter the appropriate SRT from the Labor Allowance Table. Administrative time will be included automatically as SRT 939-6010A for 0.3 hours.
- The VMRS Component Code is F99-999-005 and the Cause Code is A1 – Campaign.
- U.S. and Canada — Reimbursement for Prior Repairs. When a customer asks about reimbursement, please do the following:
- Accept the documentation of the previous repair.
- Make a brief check of the customer’s paperwork to see if the repair may be eligible for reimbursement. (See the “Copy of Owner Letter” section of this bulletin for reimbursement guidelines.)
- Submit an OWL Recall Pre-Approval Request for a decision.
- Include the approved amount on your claim in the Other Charges section.
- Attach the documentation to the pre-approval request.
- If approved, submit a based on claim for the pre-approval.
- Reimburse the customer the appropriate amount.
IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the campaign has not been previously completed. Also, check for a completion sticker prior to beginning work.
U.S. and Canadian dealers, contact the Warranty Campaigns Department via Web inquiry at DTNAConnect.com / WSC, if you have any questions or need additional information. Export distributors, submit a Web inquiry or contact your International Service Manager.
U.S. and Canadian Dealers: To return excess kit inventory related to this campaign, U.S. dealers must submit a Parts Authorization Return (PAR) to the Memphis PDC. Canadian dealers must submit a PAR to their facing PDC. All kits must be in resalable condition. PAR requests must include the original purchase invoice number. Export Distributors: Excess inventory is not returnable.
The letter notifying U.S. and Canadian vehicle owners is included for your reference.
Please note that the National Traffic and Motor Vehicle Safety Act, as amended (Title 49, United States Code, Chapter 301), requires the owner’s vehicle(s) be corrected within a reasonable time after parts are available to you. The Act states that failure to repair a vehicle within 60 days after tender for repair shall be prima facie evidence of an unreasonable time. However, circumstances of a particular situation may reduce the 60 day period. Failure to repair a vehicle within a reasonable time can result in either the obligation to (a) replace the vehicle with an identical or reasonably equivalent vehicle, without charge, or (b) refund the purchase price in full, less a reasonable allowance for depreciation. The Act further prohibits dealers from selling a vehicle unless all outstanding recalls are performed. Any lessor is required to send a copy of the recall notification to the lessee within 10 days. Any subsequent stage manufacturer is required to forward this notice to its distributors and retail outlets within five working days.
Copy of Notice to Owners in Phase One
Subject: Braking System Platform Single Modulator Valves
For the Notice to U.S. Customers: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. For the Notice to Canadian Customers: This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division, has decided that a
defect that relates to motor vehicle safety exists on specific Model Year 2017-2021 Freightliner Cascadia vehicles manufactured March 8, 2016, through June 25, 2020.
On certain vehicles, chemical corrosion could affect the functionality of the single brake modulator valve, which may result in slow release timing of brakes on the affected side. A slow release of the brake on one side during an active brake request (i.e. automatic braking events), could lead to a brake pull resulting in a sudden change in vehicle direction due to uneven braking on the front axle, increasing the risk of a motor vehicle crash. Regular service brakes are not affected.
The front left and right single brake modulator valves will be replaced and spacers added. Repairs will be performed by Daimler Trucks North America authorized service facilities.
This recall is expected to begin on September 21, 2020. At that time, please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, go to www.Daimler-TrucksNorthAmerica.com. On the menu tab, select “Contact,” scroll down to “Find a Dealer,” and select the appropriate brand. The Recall will take approximately two hours and will be performed at no charge to you. You may also confirm your vehicle’s involvement in this recall at this URL: https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage
You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.
If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712,
7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address
DTNA.Warranty.Campaigns@Daimler.com. For the Notice to U.S. Customers: If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the
Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to https://www.safercar.gov. For the Notice to Canadian Customers: If you wish to submit a complaint about this recall, you can contact Transport Canada road safety, 80 rue Noel, Gatineau, Quebec J8Z 0A1 or call (800) 333-0510.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Copy of Notice to Owners in Remaining Phases
Subject: Braking System Platform Single Modulator Valves
For the Notice to U.S. Customers: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. For the Notice to Canadian Customers: This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division, has decided that a defect that relates to motor vehicle safety exists on specific Model Year 2017-2021 Freightliner Cascadia vehicles manufactured March 8, 2016, through June 25, 2020.
On certain vehicles, chemical corrosion could affect the functionality of the single brake modulator valve, which may result in slow release timing of brakes on the affected side. A slow release of the brake on one side during an active brake request (i.e. automatic braking events), could lead to a brake pull resulting in a sudden change in vehicle direction due to uneven braking on the front axle, increasing the risk of a motor vehicle crash. Regular service brakes are not affected.
This is the first of two notices you will receive regarding this subject. This letter is to inform you of an upcoming Recall to correct the issue noted above. Daimler Trucks is currently securing replacement parts. There is no action for you to take at this time.
The second notice will inform you when the final remedy is available. When you receive the second notice, please contact your authorized Daimler Trucks North America dealer to schedule the Recall for your vehicle.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.
If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712,
7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address
DTNA.Warranty.Campaigns@Daimler.com. For the Notice to U.S. Customers: If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the
Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to https://www.safercar.gov. For the Notice to Canadian Customers: If you wish to submit a complaint about this recall, you can contact Transport Canada road safety, 80 rue Noel, Gatineau, Quebec J8Z 0A1 or call (800) 333-0510.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Reimbursement to Customers for Repairs Performed Prior to Recall
If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:
- The name and address of the person who paid for the repair
- The Vehicle Identification Number (VIN) of the vehicle that was repaired
- What problem occurred, what repair was done, when the repair was done
- Who repaired the vehicle
- The total cost of the repair expense that is being claimed
- Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt) Reimbursement will be made by check from your Daimler Trucks North America LLC dealer.
Please speak with your Daimler Trucks North America LLC authorized dealer concerning this matter.
Work Instructions
Subject: Braking System Platform Single Modulator Valves
Models Affected: Specific Model Year 2017-2021 Freightliner Cascadia vehicles manufactured March 8, 2016, through June 25, 2020.
IMPORTANT: Due to parts availability ,this campaign will be released in phases. The phase will be determined based on vehicle age, vehicle miles, and corrosion factors. You must confirm a vehicle displays FL855 on the OWL Coverage Info screen before proceeding.
PLEASE DO NOT OVERSTOCK KITS, AND DO NOT PERFORM ON VEHICLES THAT ARE NOT YET ACTIVE IN OWL.
Front Modulator Valve Replacement
1. Check the base label (Form WAR259) for a completion sticker for FL855 (Form WAR260) indicating this work has been done. The base label is usually located on the passenger-side door, about 12 inches (30 cm) below the door latch. If a sticker is present for FL855, no work is needed. If there is no sticker, proceed with the next step.
2. Park the vehicle on a level surface, shut down the engine, and set the parking brake. Chock the tires.
3. Open the hood.
NOTE: Both the left and right modulator valves must be replaced.
4. Locate the modulator valve on the left-front frame rail behind the wheel. See Fig. 1.
5. Using the flat end of a screwdriver, disconnect the electrical modulator valve connector on the front side of the frame rail above the front axle. See Fig. 2.
6. Remove the ABS zip tie from the modulator mounting bolt. See Fig. 3.
7. Using special tool NQ307001-1 in kit number NQ307001, disconnect the plastic air line from the modulator
8. Using a 7/8 inch wrench, remove the quick connect fitting from the modulator. See Fig. 6.
9. Using a 7/8 inch wrench, remove the threaded air line that goes from the modulator to the brake chamber. See Fig. 7.
NOTE: The fitting hits the frame rail when it is turned and cannot be removed. However, it is easier to loosen the fitting while the modulator is attached to the vehicle.
10. Using a 23 mm wrench, loosen the brake chamber air line fitting on the modulator valve. See Fig. 8.
11. Using a 1/2 inch socket wrench, remove the two modulator valve mounting bolts, then remove the modulator valve from the vehicle.
12. Using a 23 mm wrench, remove the brake chamber air line fitting from the modulator valve.
IMPORTANT: Be careful when applying sealant to the threads of the air line fitting to avoid internal contamination of the air system.
13. Clean any old sealant off of the threads and apply Loctite® 567 on the quick connect fitting.
14. Using a 23 mm wrench install the brake chamber air line fitting on the new modulator valve.
15. Using a 1/2 inch socket wrench and the new bolts, spacers, and washers from the kit, install the modulator on the vehicle. Tighten the bolts 11 lbf·ft (15 N·m). See Fig. 9, Fig. 10, Fig. 11, and Fig. 12.
16. Using a 7/8 inch wrench, install the threaded air line that goes from the modulator valve to the brake chamber.
IMPORTANT: Be careful when applying sealant to the threads of the air line fitting to avoid internal contamination of the air system.
17. Clean any old sealant off of the threads and apply Loctite® 567 on the quick connect fitting.
18. Using a 7/8 inch wrench install the quick connect fitting on the modulator valve.
19. Attach the plastic air line to the modulator.
20. Install the ABS zip tie on the modulator mounting bolt (to prevent chafing). See Fig. 3.
21. Connect the electrical modulator valve connector.
22. Repeat the procedure for the modulator valve on the other side of the vehicle.
23. Close the hood.
24. Build air pressure to check for leaks and perform six full brake applications in the parking lot to verify proper brake performance.
25. Clean a spot on the base label (Form WAR259). Write the recall number, FL855, on a blank red completion sticker (Form WAR260), and attach it to the base label to indicate this recall has been completed.
Daimler Trucks
North America LLC
May 2021
FL855AB
NHTSA #20V-390
IMPORTANT SAFETY RECALL
See enclosed VIN list
Subject: Braking System Platform Single Modulator Valves
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division, has decided that a defect which relates to motor vehicle safety exists on specific Model Year 2017-2021 Freightliner Cascadia vehicles manufactured March 8, 2016, through June 25, 2020.
On certain vehicles, chemical corrosion could affect the functionality of the single brake modulator valve, which may result in slow release timing of brakes on the affected side. A slow release of the brake on one side during an active brake request (i.e. automatic braking events), could lead to a brake pull resulting in a sudden change in vehicle direction due to uneven braking on the front axle, increasing the risk of a motor vehicle crash. Regular service brakes are not affected.
The replacement parts have been secured and the final repair is ready. The front left and right single brake modulator valves, located on the frame rails, will be replaced and spacers added.
Repairs will be performed by Daimler Trucks North America authorized service facilities. At this time, please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at Daimler-TrucksNorthAmerica.com/Contactus. Scroll down to “Locate a Dealer” and select the appropriate brand. The Recall will take approximately two hours and will be performed at no charge to you. You may also confirm your vehicle’s involvement in this recall at this URL: https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage.
You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.
If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimler.com. For other concerns, you may contact the Customer Assistance Center at (800) 385-4357. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Reimbursement to Customers for Repairs Performed Prior to Recall
If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:
- The name and address of the person who paid for the repair.
- The Vehicle Identification Number (VIN) of the vehicle that was repaired.
- What problem occurred, what repair was done, when the repair was done.
- Who repaired the vehicle.
- The total cost of the repair expense that is being claimed.
- Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt).
Reimbursement will be made by check from your Daimler Trucks North America LLC dealer.
Please speak with your Daimler Trucks North America LLC authorized dealer concerning this matter
SEOCONTENT-START
Defect Information Report
(Section 573.6)
FL-855
Date of Submission: July 2, 2020
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: X Safety Defect ⃝ Non-Compliance
Vehicle Information
Model Yr. Start: 2017 Model Yr. End: 2021
Make: Freightliner
Model: Cascadia
Production Dates: Begin: 03/08/2016
End: 06/25/2020
Descriptive Information:
Vehicles equipped with suspect modulator valves within the suspect build dates
Number potentially involved: 164,317 Estimated percentage of involve with defect: 1%
Defect / Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance:
On certain vehicles, chemical corrosion could affect the functionality of the single brake modulator valve,
which may result in slow release timing of brakes on the affected side. Regular service brakes are
unaffected.
Describe the safety risk:
A slow release of the brake on one side during an active brake request (ie. automatic braking events)
could lead to a brake pull resulting in a sudden change in vehicle direction due to uneven braking on the
front axle increasing the risk of a motor vehicle crash.
Identify any warning which can precede or occur: N/A
If applicable, identify the manufacture of the defective or noncompliant component:
Wabco USA LLC
Involved Components
Component Name: SOLENOID ABS MODULATOR VALVE
Component Description: Solenoid, ABS Modulator Valve, Quick Release
Component Part Number: WAB472 196 025 0
Chronology of Defect / Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the
noncompliance decision.:
May 2019, DTNA received a report of a vehicle pulling to the right, due to an unknown cause, during a
brake event. Upon repairing the vehicle, the dealer was able to isolate the failure to the right single
modulator valve. May 2019-July 2019, DTNA performed a preliminary population and warranty seek.
Warranty indicated 6 claims of a vehicle pull event during an external brake request, where 3 claims
were from a single customer. DTNA had requested parts to be returned for further review. July 2019,
DTNA notified NHTSA Office of Defects Investigation (ODI) of an ongoing investigation relating to brake
pull during an active brake request. August 2019, DTNA received the returned parts and began an
electrical and functional test. Testing indicated parts were within specification. During a functional
evaluation, a pressure differential in air release timing was observed. The parts were shipped to the
supplier for component breakdown and further evaluation. August – September 2019, Supplier evaluated
the returned parts and found blockage of the inlet solenoid from magnesium chloride corrosion
deforming the O-ring. October 2019, DTNA and supplier began reviewing vehicle routes and chemical
wash processes, with ongoing corrosion testing with magnesium chloride and requests to the field for
additional returned parts. 34 valves returned for review from single customer. Failed valves appear to be
isolated to only the right valve and a single route. November 2019, DTNA shared an update of the
ongoing investigation with NHTSA ODI, including the low claim rate. While the investigation continued,
the modulator valves in production vehicles were spaced away from the frame rails to potentially reduce
opportunity of corrosion. January 2020, DTNA provided a status update to NHTSA ODI on testing to
understand detectability and severity. Ongoing corrosion testing and analysis continued by DTNA and
supplier. Corrosion testing with MgCl2 and NaCl was unable to replicate failures observed in field.
February 2020 – April 2020, DTNA worked with customers in various locations to randomly sample parts
to inspect. Twelve valves were returned outside of the salt belt region and 12 inside the salt belt region of
the Northeastern United States and shipped to the supplier for further evaluation. There were no
indications of a valve malfunction on the returned parts. There were still no reports of vehicle pull during
active brake request since mid-2019. May 2020, an additional field service report indicated 13 additional
failures on a separate fleet. DTNA provided a status update with NHTSA ODI on the additional field
report with pending review of returned parts. Customer provided 13 valves from different trucks for
review and these were sent to the supplier for further evaluation. June 2020, DTNA continued corrosion
testing and began analyzing chemical wash and thermal impacts to the valve. Supplier provided a report
of one returned valve that appeared to share a similar failure mode as the initial parts returned from
mid-2019. The remaining 12 valves are under review. From the returned valves prior to May, it was
believed the issue to be isolated to a single customer because there were no confirmed reports from
other customers at this time. The additional field complaint and data obtained in May/June 2020
suggested that additional customers are also impacted in different locations. With eight claims of
failures experienced in the field, even though the failure mode is not fully understood, the issue appeared
to be more systemic, and therefore DTNA, with an abundance of caution, decided to initiate a voluntary
recall campaign to address potential vehicle pull during an active brake request.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for
reimbursement.
Repairs will be performed by Daimler Trucks North America authorized service facilities. Details of the
reimbursement plan will be included in the owner’s notification letter.
Identify the Recall Schedule
Describe the recall schedule for notifications.:
Customer notification will be made by first class mail using Daimler Trucks North America records to
determine the customers affected.
Planned Dealer Notification Begin Date: 08/30/2020
Planned Dealer Notification End Date: 08/30/2020
Planned Owner Notification Begin Date: 08/30/2020
Planned Owner Notification End Date: 08/30/2020
Manufacture’s identification code for this recall (if applicable): FL-855
DTNA Representative;
Andy Jones
Manager
Compliance and Regulatory Affairs
***********************************************************************************************
Defect Information Report
(Section 573.6)
FL-855
Date of Submission: September 1, 2020
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: X Safety Defect ⃝ Non-Compliance
Vehicle Information
Model Yr. Start: 2017 Model Yr. End: 2021
Make: Freightliner
Model: Cascadia
Production Dates: Begin: 03/08/2016
End: 06/25/2020
Descriptive Information:
Vehicles equipped with suspect modulator valves within the suspect build dates
Number potentially involved: 164,317 Estimated percentage of involve with defect: 1%
Defect / Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance:
On certain vehicles, chemical corrosion could affect the functionality of the single brake modulator valve, which may result in slow release timing of brakes on the affected side. Regular service brakes are unaffected.
Describe the safety risk:
A slow release of the brake on one side during an active brake request (ie. automatic braking events) could lead to a brake pull resulting in a sudden change in vehicle direction due to uneven braking on the front axle increasing the risk of a motor vehicle crash.
Identify any warning which can precede or occur: N/A
If applicable, identify the manufacture of the defective or noncompliant component:
Wabco USA LLC
Involved Components
Component Name: SOLENOID ABS MODULATOR VALVE
Component Description: Solenoid, ABS Modulator Valve, Quick Release
Component Part Number: WAB472 196 025 0
Chronology of Defect / Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision.:
May 2019, DTNA received a report of a vehicle pulling to the right, due to an unknown cause, during a brake event. Upon repairing the vehicle, the dealer was able to isolate the failure to the right single modulator valve. May 2019-July 2019, DTNA performed a preliminary population and warranty seek. Warranty indicated 6 claims of a vehicle pull event during an external brake request, where 3 claims were from a single customer. DTNA had requested parts to be returned for further review. July 2019, DTNA notified NHTSA Office of Defects Investigation (ODI) of an ongoing investigation relating to brake pull during an active brake request. August 2019, DTNA received the returned parts and began an electrical and functional test. Testing indicated parts were within specification. During a functional evaluation, a pressure differential in air release timing was observed. The parts were shipped to the supplier for component breakdown and further evaluation. August – September 2019, Supplier evaluated the returned parts and found blockage of the inlet solenoid from magnesium chloride corrosion deforming the O-ring. October 2019, DTNA and supplier began reviewing vehicle routes and chemical wash processes, with ongoing corrosion testing with magnesium chloride and requests to the field for additional returned parts. 34 valves returned for review from single customer. Failed valves appear to be isolated to only the right valve and a single route. November 2019, DTNA shared an update of the ongoing investigation with NHTSA ODI, including the low claim rate. While the investigation continued, the modulator valves in production vehicles were spaced away from the frame rails to potentially reduce opportunity of corrosion. January 2020, DTNA provided a status update to NHTSA ODI on testing to understand detectability and severity. Ongoing corrosion testing and analysis continued by DTNA and supplier. Corrosion testing with MgCl2 and NaCl was unable to replicate failures observed in field. February 2020 – April 2020, DTNA worked with customers in various locations to randomly sample parts to inspect. Twelve valves were returned outside of the salt belt region and 12 inside the salt belt region of the Northeastern United States and shipped to the supplier for further evaluation. There were no indications of a valve malfunction on the returned parts. There were still no reports of vehicle pull during active brake request since mid-2019. May 2020, an additional field service report indicated 13 additional failures on a separate fleet. DTNA provided a status update with NHTSA ODI on the additional field report with pending review of returned parts. Customer provided 13 valves from different trucks for review and these were sent to the supplier for further evaluation. June 2020, DTNA continued corrosion testing and began analyzing chemical wash and thermal impacts to the valve. Supplier provided a report
of one returned valve that appeared to share a similar failure mode as the initial parts returned from mid-2019. The remaining 12 valves are under review. From the returned valves prior to May, it was believed the issue to be isolated to a single customer because there were no confirmed reports from other customers at this time. The additional field complaint and data obtained in May/June 2020 suggested that additional customers are also impacted in different locations. With eight claims of failures experienced in the field, even though the failure mode is not fully understood, the issue appeared to be more systemic, and therefore DTNA, with an abundance of caution, decided to initiate a voluntary recall campaign to address potential vehicle pull during an active brake request. September 1, 2020, DTNA amended 573 filing to include phase release plan for repairing of FL855.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for reimbursement.
Affected vehicles will receive a new valve. Repairs will be released in phases based on locations of the vehicle and performed by Daimler Trucks North America authorized service facilities. Details of the reimbursement plan will be included in the owner’s notification letter.
Identify the Recall Schedule
Describe the recall schedule for notifications.:
Customer notification will be made by first class mail using Daimler Trucks North America records to determine the customers affected.
Planned Dealer Notification Begin Date: 08/30/2020
Planned Dealer Notification End Date: 08/30/2020
Planned Owner Notification Begin Date: 08/30/2020
Planned Owner Notification End Date: 08/30/2020
Manufacture’s identification code for this recall (if applicable): FL-855
DTNA Representative;
Larissa Stoffels
Executive Manager, Vehicle Safety
Compliance and Regulatory Affairs
*****************************************************************************************************
Defect Information Report
(Section 573.6)
FL-855
Date of Submission: March 19, 2021
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: X Safety Defect ⃝ Non-Compliance
Vehicle Information
Model Yr. Start: 2017 Model Yr. End: 2021
Make: Freightliner
Model: Cascadia
Production Dates: Begin: 03/08/2016
End: 06/30/2020
Descriptive Information:
Vehicles equipped with suspect modulator valves within the suspect build dates
Number potentially involved: 164,326 Estimated percentage of involve with defect: 1%
Defect / Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance:
On certain vehicles, chemical corrosion could affect the functionality of the single brake modulator valve,
which may result in slow release timing of brakes on the affected side. Regular service brakes are
unaffected.
Describe the safety risk:
A slow release of the brake on one side during an active brake request (ie. automatic braking events)
could lead to a brake pull resulting in a sudden change in vehicle direction due to uneven braking on the
front axle increasing the risk of a motor vehicle crash.
Identify any warning which can precede or occur: N/A
If applicable, identify the manufacture of the defective or noncompliant component:
Wabco USA LLC
Involved Components
Component Name: SOLENOID ABS MODULATOR VALVE
Component Description: Solenoid, ABS Modulator Valve, Quick Release
Component Part Number: WAB472 196 025 0
Chronology of Defect / Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the
noncompliance decision.:
May 2019, DTNA received a report of a vehicle pulling to the right, due to an unknown cause, during a
brake event. Upon repairing the vehicle, the dealer was able to isolate the failure to the right single
modulator valve. May 2019-July 2019, DTNA performed a preliminary population and warranty seek.
Warranty indicated 6 claims of a vehicle pull event during an external brake request, where 3 claims
were from a single customer. DTNA had requested parts to be returned for further review. July 2019,
DTNA notified NHTSA Office of Defects Investigation (ODI) of an ongoing investigation relating to brake
pull during an active brake request. August 2019, DTNA received the returned parts and began an
electrical and functional test. Testing indicated parts were within specification. During a functional
evaluation, a pressure differential in air release timing was observed. The parts were shipped to the
supplier for component breakdown and further evaluation. August – September 2019, Supplier evaluated
the returned parts and found blockage of the inlet solenoid from magnesium chloride corrosion
deforming the O-ring. October 2019, DTNA and supplier began reviewing vehicle routes and chemical
wash processes, with ongoing corrosion testing with magnesium chloride and requests to the field for
additional returned parts. 34 valves returned for review from single customer. Failed valves appear to be
isolated to only the right valve and a single route. November 2019, DTNA shared an update of the
ongoing investigation with NHTSA ODI, including the low claim rate. While the investigation continued,
the modulator valves in production vehicles were spaced away from the frame rails to potentially reduce
opportunity of corrosion. January 2020, DTNA provided a status update to NHTSA ODI on testing to
understand detectability and severity. Ongoing corrosion testing and analysis continued by DTNA and
supplier. Corrosion testing with MgCl2 and NaCl was unable to replicate failures observed in field.
February 2020 – April 2020, DTNA worked with customers in various locations to randomly sample parts
to inspect. Twelve valves were returned outside of the salt belt region and 12 inside the salt belt region of
the Northeastern United States and shipped to the supplier for further evaluation. There were no
indications of a valve malfunction on the returned parts. There were still no reports of vehicle pull during
active brake request since mid-2019. May 2020, an additional field service report indicated 13 additional
failures on a separate fleet. DTNA provided a status update with NHTSA ODI on the additional field
report with pending review of returned parts. Customer provided 13 valves from different trucks for
review and these were sent to the supplier for further evaluation. June 2020, DTNA continued corrosion
testing and began analyzing chemical wash and thermal impacts to the valve. Supplier provided a report
of one returned valve that appeared to share a similar failure mode as the initial parts returned from
mid-2019. The remaining 12 valves are under review. From the returned valves prior to May, it was
believed the issue to be isolated to a single customer because there were no confirmed reports from
other customers at this time. The additional field complaint and data obtained in May/June 2020
suggested that additional customers are also impacted in different locations. With eight claims of
failures experienced in the field, even though the failure mode is not fully understood, the issue appeared
to be more systemic, and therefore DTNA, with an abundance of caution, decided to initiate a voluntary
recall campaign to address potential vehicle pull during an active brake request. September 1, 2020,
DTNA amended 573 filing to include phase release plan for repairing of FL855. March 2021 population
and manufacturing dates updated.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for
reimbursement.
Affected vehicles will receive a new valve. Repairs will be released in phases based on locations of the
vehicle and performed by Daimler Trucks North America authorized service facilities. Details of the
reimbursement plan will be included in the owner’s notification letter.
Identify the Recall Schedule
Describe the recall schedule for notifications.:
Customer notification will be made by first class mail using Daimler Trucks North America records to
determine the customers affected.
Planned Dealer Notification Begin Date: 08/30/2020
Planned Dealer Notification End Date: 08/30/2020
Planned Owner Notification Begin Date: 08/30/2020
Planned Owner Notification End Date: 08/30/2020
Manufacture’s identification code for this recall (if applicable): FL-855
DTNA Representative;
Larissa Stoffels
Executive Manager, Vehicle Safety
Compliance and Regulatory Affairs
*****************************************************************************************************
Amended Defect Information Report
(Section 573.6)
FL-855
Date of Submission: April 1, 2021
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: X Safety Defect ⃝ Non-Compliance
Vehicle Information
Model Yr. Start: 2017 Model Yr. End: 2021
Make: Freightliner
Model: Cascadia
Production Dates: Begin: 03/08/2016
End: 06/30/2020
Descriptive Information:
Cascadia vehicles equipped with modulator valve part number WAB472 196 025 0, built within the suspect build dates. Vehicles built outside the suspect build dates have painted modulator valves.
Number potentially involved: 164,326 Estimated percentage of involve with defect: 1%
Defect / Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance:
On certain vehicles, chemical corrosion could affect the functionality of the single brake modulator valve, which may result in slow release timing of brakes on the affected side. Regular service brakes are unaffected.
Describe the safety risk:
A slow release of the brake on one side during an active brake request (ie. automatic braking events) could lead to a brake pull resulting in a sudden change in vehicle direction due to uneven braking on the front axle increasing the risk of a motor vehicle crash.
Identify any warning which can precede or occur: N/A
If applicable, identify the manufacture of the defective or noncompliant component:
Wabco USA LLC
Involved Components
Component Name: SOLENOID ABS MODULATOR VALVE
Component Description: Solenoid, ABS Modulator Valve, Quick Release
Component Part Number: WAB472 196 025 0
Chronology of Defect / Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision.:
May 2019, DTNA received a report of a vehicle pulling to the right, due to an unknown cause, during a brake event. Upon repairing the vehicle, the dealer was able to isolate the failure to the right single modulator valve. May 2019-July 2019, DTNA performed a preliminary population and warranty seek. Warranty indicated 6 claims of a vehicle pull event during an external brake request, where 3 claims were from a single customer. DTNA had requested parts to be returned for further review. July 2019, DTNA notified NHTSA Office of Defects Investigation (ODI) of an ongoing investigation relating to brake pull during an active brake request. August 2019, DTNA received the returned parts and began an electrical and functional test. Testing indicated parts were within specification. During a functional evaluation, a pressure differential in air release timing was observed. The parts were shipped to the supplier for component breakdown and further evaluation. August – September 2019, Supplier evaluated the returned parts and found blockage of the inlet solenoid from magnesium chloride corrosion deforming the O-ring. October 2019, DTNA and supplier began reviewing vehicle routes and chemical wash processes, with ongoing corrosion testing with magnesium chloride and requests to the field for additional returned parts. 34 valves returned for review from single customer. Failed valves appear to be isolated to only the right valve and a single route. November 2019, DTNA shared an update of the ongoing investigation with NHTSA ODI, including the low claim rate. While the investigation continued, the modulator valves in production vehicles were spaced away from the frame rails to potentially reduce opportunity of corrosion. January 2020, DTNA provided a status update to NHTSA ODI on testing to understand detectability and severity. Ongoing corrosion testing and analysis continued by DTNA and supplier. Corrosion testing with MgCl2 and NaCl was unable to replicate failures observed in field. February 2020 – April 2020, DTNA worked with customers in various locations to randomly sample parts to inspect. Twelve valves were returned outside of the salt belt region and 12 inside the salt belt region of the Northeastern United States and shipped to the supplier for further evaluation. There were no indications of a valve malfunction on the returned parts. There were still no reports of vehicle pull during active brake request since mid-2019. May 2020, an additional field service report indicated 13 additional failures on a separate fleet. DTNA provided a status update with NHTSA ODI on the additional field
report with pending review of returned parts. Customer provided 13 valves from different trucks for review and these were sent to the supplier for further evaluation. June 2020, DTNA continued corrosion testing and began analyzing chemical wash and thermal impacts to the valve. Supplier provided a report of one returned valve that appeared to share a similar failure mode as the initial parts returned from mid-2019. The remaining 12 valves are under review. From the returned valves prior to May, it was believed the issue to be isolated to a single customer because there were no confirmed reports from other customers at this time. The additional field complaint and data obtained in May/June 2020 suggested that additional customers are also impacted in different locations. With eight claims of failures experienced in the field, even though the failure mode is not fully understood, the issue appeared to be more systemic, and therefore DTNA, with an abundance of caution, decided to initiate a voluntary recall campaign to address potential vehicle pull during an active brake request. September 1, 2020, DTNA amended 573 filing to include phase release plan for repairing of FL855. March 2021 population and manufacturing dates updated. April 1, 2021, DTNA revised the descriptive information.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for reimbursement.
Affected vehicles will receive a new valve. Repairs will be released in phases based on locations of the vehicle and performed by Daimler Trucks North America authorized service facilities. Details of the reimbursement plan will be included in the owner’s notification letter.
Identify the Recall Schedule
Describe the recall schedule for notifications.:
Customer notification will be made by first class mail using Daimler Trucks North America records to determine the customers affected.
Planned Dealer Notification Begin Date: 08/30/2020
Planned Dealer Notification End Date: 08/30/2020
Planned Owner Notification Begin Date: 08/30/2020
Planned Owner Notification End Date: 08/30/2020
Manufacture’s identification code for this recall (if applicable): FL-855
DTNA Representative;
Larissa Stoffels
Executive Manager, Vehicle Safety
Compliance and Regulatory Affairs
5 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| FREIGHTLINER | CASCADIA | 2017-2021 |
21 Associated Documents
Defect Notice 573 Report
RCLRPT-20V390-9612.PDF 214.171KB
Loading...
Reload document 
Open in new tab
Miscellaneous Document- Defect Information Report
RMISC-20V390-0198.pdf 917.016KB
Loading...
Recall Acknowledgement
RCAK-20V390-6065.pdf 245.148KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-20V390-3038.pdf 53.499KB
Loading...
Remedy Instructions and TSB
RCRIT-20V390-3930.pdf 617.485KB
Loading...
Recall Quarterly Report #2, 2020-4
RCLQRT-20V390-5959.PDF 211.273KB
Loading...
Recall 573 Report- Amendment 2
RCLRPT-20V390-4957.PDF 214.266KB
Loading...
Miscellaneous Document- Defect Information Report
RMISC-20V390-2643.PDF 995.849KB
Loading...
Miscellaneous Document
RMISC-20V390-3178.pdf 872.707KB
Loading...
Recall 573 Report- Amendment 1
RCLRPT-20V390-7626.PDF 214.265KB
Loading...
Recall Quarterly Report #1, 2020-3
RCLQRT-20V390-4414.PDF 211.157KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-20V390-4656.pdf 116.024KB
Loading...
Miscellaneous Document- Defect Information Report
RMISC-20V390-1173.pdf 663.424KB
Loading...
Owner Notification Letter(Part 577)
RCONL-20V390-2621.pdf 40.518KB
Loading...
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-20V390-2423.pdf 37.502KB
Loading...
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-20V390-1802.pdf 36.884KB
Loading...
Manufacturer Notices(to Dealers,etc)
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-20V390-2012.pdf 39.877KB
Loading...
Recall Quarterly Report #3, 2021-1
RCLQRT-20V390-1955.PDF 211.366KB
Loading...
Recall 573 Report- Amendment 3
RCLRPT-20V390-2903.PDF 214.32KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-20V390-4303.pdf 116.038KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V390&docType=RCL
- Audible Audiobook
- Mile One Press (Author) - John Flaherty (Narrator)
- English (Publication Language)
- 12/15/2022 (Publication Date) - Mile One Press (Publisher)
- 【43 PCS PACKAGE】- The DOT air brake fittings kit includes: 6 pcs brass tube tee fittings, 6 pcs brass straight union connectors, 14 pcs brass straight push connectors NPT thread, 14 pcs 90°elbows NPT thread, 2 pcs brass 1/4" inflation Schrader valve, 1 pc tube cutter. Air brake fitting assortment types: 1/8", 1/4", 3/8", 1/2".
- 【PREMIUM QUALITY】- Our DOT air hose fittings are made of high-quality CA360 brass, meets D.O.T. FMVSS 571.106 approved, SAE J1131 air brake system requirements, with corrosion resistance, high-temperature ductility, low permeability and long service life.
- 【MAX WORKING INTENSITY】- The brass fittings can be operated in pressures from vacuum to 250psi and in temperatures from -40°F to +200°F (-40°C to +93°C). Note: see the tubing manufacturer's recommendations for pressure and temperature mutations.
- 【EASY INSTALLATION】- The quick connect design and precise NPT threading make installation of air brake accessories easy, just push to connect. And there is pre-applied sealant on NPT male thread for better sealing.
- 【WIDE APPLICATION】- The brass DOT air brake fittings can be used with air suspension systems, copper tubing in airlines brake systems, perfect for truck /RV repair air line leak, also ideal for industrial workshops, daily garden or lawn mower repair, towing machine hose connection, etc.
- 【14 PCS PACKAGE】- The air hose & DOT air fittings kit includes: 50 ft 1/4" air hose, 4 pcs 1/4" tee fittings, 4 pcs 1/4“ straight union, 2 pcs 1/4" 90°elbows, 2 pcs 1/4" Y splitters, 1 pc tube cutter. Air brake fitting assortment types: 1/4".
- 【PREMIUM DOT FITTINGS】- Our DOT air hose fittings are made of high-quality CA360 brass and high-strength plastic, meet D.O.T. FMVSS 571.106 approved, SAE J1131 air brake system requirements, with corrosion resistance, high-temperature ductility, low permeability and long service life.
- 【PREMIUM PA12 AIR HOSE】- Our air hose fittings are made of high-quality PA12 Polyamide, meet D.O.T. FMVSS 571.106 approved, SAE J844 air brake system requirements, with corrosion resistance, high-temperature ductility, high pressure resistance and long service life.
- 【MAX WORKING INTENSITY】- The brass fittings can be operated in pressures from vacuum to 250 PSI and in temperatures from -30°F to +180°F (-34°C to +82°C). Note: see the tubing manufacturer's recommendations for pressure and temperature mutations.
- 【EASY INSTALLATION】- The DOT quick connect design makes the installation of air brake accessories easy, just push to connect.
- 【High Quality in Air Brake Coiled】Our air brake coiled hose is designed with superior craftsmanship and high quality nylon materials, delivering a reliable and secure connection for your air brake system.The reinforced air hose provides added protection and longer lasting performance.
- 【Brass Fitting】Air hose coiled with a 1/2" swivel brass fitting and spring guard for a secure, tractor-end connection, these air lines meet or exceed SAE J844 A hose requirements and DOT FMVSS 106 ensuring that you're getting a product that meets industry standards.
- 【SPRING JOINT】Designed air coil and power cord with a spring guard for easy coupling and uncoupling, save you time and effort. Plus, their durable construction and easy-to-install design provide peace of mind and reliable performance for years to come.
- 【Why Choose Us?】7 Way Trailer coiled is made of pure copper for long-lasting performance and excellent electrical and thermal conductivity. This ensures that your car lights, such as turn signals and brake lights, work properly during your drive.
- 【Versatile Applications】 Dazakoot electric power cables are perfect for connecting the trailer, brake, reverse, turn signals and auxiliary power on your tail, RV, camper, caravan, food van, and other towed vehicles. Before beginning any operations on the product, please refer to the diagram for guidance.
- Comprehensive Kit: the DOT air brake fittings kit includes 12 DOT union, 6 DOT tee, 4 bushing, 8 DOT male elbow connector (90°), 8 DOT straight male connector, 4 DOT male elbow connector (45°), 2 compression fittings 1/4" tube and 1/4" male, and 1 tubing cutter; Fitting types, 1/4", 3/8", 1/2", 1/8", 5/8"; They are packed in a plastic storage box with flip lock tabs; This comprehensive assortment ensures that you have the right fittings for various connections and configurations
- Quality Material: crafted mainly from CA360 brass, these air line fittings are meet with D. O. T. FMVSS 571.106 certification and compatible with SAE J1131 air brake system requirements; They are corrosion resistant, exhibit high temperature ductility, low permeability, and boast a long service life; The use of quality material ensures reliability and longevity in various air brake system applications
- Maximum Working Strength: the brass components in this brake line fittings set can operate under pressures ranging from vacuum to 300psi and temperatures from -40°F to +200°F (-40°C to +93°C); It's important to refer to the pressure and temperature recommendations from the pipe manufacturer for optimal performance and safety
- Easy Installation: featuring a quick connect design and precise threads compatible with NPT, these air brake fittings facilitate simple installation with a push to connect mechanism; Additionally, you can apply sealant on the external threads to enhance the sealing effect, making the installation process more efficient and reliable
- Wide Application: this brass air fittings set is suitable for use in air suspension systems, copper tubing in airline brake systems, truck air pipe leak repairs, industrial workshop applications, as well as maintenance for everyday garden or lawn equipment and trailer hose connections; The broad applicability of these fittings makes them a practical choice for various scenarios
- Contain common air brake fitting styles
- D.O.T Union:1/4"(4 pcs), 3/8"(4 pcs), 1/2"(4 pcs), 5/8"(2 pcs)
- D.O.T Tee:1/4"(2 pcs), 3/8"(2 pcs), 1/2"(2 pcs); Bushing: 3/8" NPT Female x 1/2" NPT Male(2 pcs)
- D.O.T Male Elbow:1/4" OD x 1/8" NPT Male(2 pcs), 1/4" OD x 1/4" NPT Male(2 pcs), 3/8" OD x 3/8" NPT Male(2 pcs), 1/2" OD x 3/8" NPT Male(2 pcs)
- D.O.T Sraight Male Connector: 1/4" x 1/8" NPT Male(2 pcs), 1/4" x 1/4" NPT Male(2 pcs), 3/8" x 3/8" NPT Male(2 pcs), 1/2" x 3/8" NPT Male(2 pcs)
- 【Includes 1 Cutter】For no air leakage, the cross section of the air line must be smooth and flat, no gap, uneven, and the tube cannot be oval. Our air tube come with a tube cutter to make cutting more convenient and easier!
- 【SAE J 844 DOT Approved】SAE J 844 Type 1/4” OD × 50FT Air Brake Line DOT approved, Tube Size: 1/4" OD × 4.35mm ID, Working Temperature: -40℉ to +248℉(-40℃ to +120℃), Max Working Pressure: 200 PSI.
- 【PA12 Nylon - High Resistance & Multiple Transfer】Boeray 1/4 inch × 50’ air hose is made of high quality Polyamide 12 nylon, meet a wide range of transportation needs, such as water, air, fuel, oil, etc. High quality abrasion and impact resistance to withstand most wear and tear.
- 【High Flexibility for easy bending】High toughness nylon tube, you can bend it easily. Note: please bend it under limited condition, do not over bend it to affect the usage.
- 【Application】Our 50ft air line is perfect for air suspension and air brake systems, fluid transfer like water oil and fuel for automotive vehicle marine, chemical transport, instrumentation lines, paint spraying, garden irrigation control systems, LPG and compressed natural gas systems, misting systems, pneumatic systems, Clutch Systems, etc.
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.