Recall 20V335 – FCCC Electrical Wire Routing Rubbing Frame – 2016-2020 ARBOC Spirit of America & 2014-2019 Spirit of Liberty Buses

“This site contains affiliate links for which OEMDTC may be compensated”

June 9, 2020 NHTSA CAMPAIGN NUMBER: 20V335000

Freightliner Power Cables Incorrectly Routed

The misrouted power cables may short circuit, increasing the risk of a fire.

 

NHTSA Campaign Number: 20V335

Manufacturer ARBOC Specialty Vehicles, LLC

Components ELECTRICAL SYSTEM

Potential Number of Units Affected 113

 

Summary

ARBOC Specialty Vehicles, LLC (ARBOC) is recalling certain 2016-2020 Spirit of America and 2014-2019 Spirit of Liberty buses built on a Freightliner Custom Chassis Corporation (FCCC) chassis. The power cables on the driver’s side may have been routed incorrectly, allowing them to rub against the frame or make contact with the ground cable.

 

Remedy

ARBOC will notify owners, and dealers will re-route, inspect, and repair power cable wiring as needed, free of charge. The recall began June 24, 2020. Owners may contact ARBOC customer service at 1-866-953-5555. ARBOC’s number for this recall is RC059801.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


 

DOC # PROCESS NAME REVISION DATE
Recall 20V335 FCCC Electrical Wire Routing Rubbing Frame   6/9/2020

 

Read process before beginning.  If you do not understand any part please contact: Chris Ward, Vice President of Service at 1‐866‐953‐5555 or by E‐mail @ cward@ARBOCSV.com.

Good Mechanics safety practice must be followed on any repairs.

Safety practices should include but not be limited to properly supporting the chassis, axles, blocking tires, and a work area free of clutter.      Repair shops safety rules must be followed and safety equipment used. O.E.M. Battery and Auxiliary Battery MUST be disconnected.

The purpose of Recall 20V335 is on certain vehicles, inspection and/or relocation of power cables for proper routing and clearance is necessary to avoid chaffing of power cables which increases the potential for fire to occur.

 

Complaint:

Area #1: FCCC Power Cable rubbing against FCCC forward frame

Area #2: FCCC Positive Cable making contact with Ground Cable Cause: Incorrect routing from FCCC

 

Correction:  Inspection and re‐routing per inspection/repair instructions

 

Vehicles Affected:  2014‐2019 ARBOC Spirit of Liberty and Spirit of America Units on Freightliner (FCCC) Chassis

 

Labor Operation Code:  RC059801

Labor Time Allowance: 0.5 hours per unit                                                            

 

Tools Required
Ratchet
5/8″ Socket

 

Parts List

 

 

Electrical Routing ‐ Area #1:

  1. Open the front door/hood at the front of the unit.
  2. Locate wiring at the driver side of firewall to inspect if rubbing on the FCCC frame. Photo 1 ‐ Correct Routing ‐ Tight and pulled away from sharp frame edge

Photo 2 ‐ Incorrect Routing ‐ Loose and making contact with sharp edge frame

3A.  If the unit is wired correctly (photo 1), please add an inspection mark to the firewall and submit warranty documentation including notation that NO further changes were required.

3B.  If the unit is wired incorrectly (photo 2), please continue to the repair section for re‐wiring instructions. When completed, please submit warranty documentation of repairs completed.

 

Repair Instructions:

  1. Disconnect batteries
  2. Remove/Discard P‐Clamp
  3. Pull Cable upwards to create maximum separation from frame and add a P‐Clamp. NOTE: Excess cable should be above the P‐Clamp as shown in Photo 1.
  4. Re‐connect batteries
  5. Add witness mark for repairs completed.

 

Electrical Routing ‐ Area #2:

  1. Open the front door/hood at the front of the unit.
  2. Locate wiring at the driver side of firewall to inspect potential cable contact

Photo 3 ‐ Correct Routing ‐ Adequate spacing between positive and ground terminals

Photo 4 ‐ Incorrect Routing ‐ Cables routed over each other and/or making contact with each other

3A. If the unit is wired correctly (photo 3), please add an inspection mark to the firewall and submit warranty documentation including notation that NO further changes were required.

3B. If the unit is wired incorrectly (photo 4), please continue to the repair section for re‐wiring instructions. When completed, please submit warranty documentation of repairs completed.

 

Repair Instructions:

  1. Disconnect batteries
  2. Loosen positive and ground connections
  3. Re‐route cables to create maximum separation from each other.
  4. Re‐tighten lug connections (Torque = 45 ft/lbs)
  5. Re‐spray connections with di‐electric spray
  6. Re‐connect batteries
  7. Add witness mark for repairs completed.

 


11 Affected Products

Vehicles

MAKE MODEL YEAR
ARBOC SPIRIT OF AMERICA 2016-2020
ARBOC SPIRIT OF LIBERTY 2014-2019

 


11 Associated Documents

Defect Notice 573 Report

RCLRPT-20V335-2232.PDF 215.059KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.02 KB]

 


Recall Acknowledgement

RCAK-20V335-6019.pdf 246.508KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [240.73 KB]

 


Remedy Instructions and TSB

RCRIT-20V335-8108.pdf 531.874KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [519.41 KB]

 


Recall 573 Report-AMENDMENT 1

RCLRPT-20V335-1419.PDF 215.059KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.02 KB]

 


Recall 573 Report- AMENDMENT 4

RCLRPT-20V335-6746.PDF 215.08KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.04 KB]

 


Recall 573 Report- AMENDMENT 3

RCLRPT-20V335-6408.PDF 215.077KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.04 KB]

 


Recall 573 Report-AMENDMENT 2

RCLRPT-20V335-3148.PDF 215.067KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.03 KB]

 


Recall Quarterly Report #1, 2020-2

RCLQRT-20V335-9085.PDF 211.145KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.20 KB]

 


Recall Quarterly Report #2, 2020-3

RCLQRT-20V335-5563.PDF 211.241KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.29 KB]

 


Recall Quarterly Report #3, 2020-4

RCLQRT-20V335-1699.PDF 211.329KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.38 KB]

 


Recall Quarterly Report #4, 2021-1

RCLQRT-20V335-5218.PDF 211.436KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.48 KB]

 


Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V335&docType=RCL

 


 

Bestseller No. 1
Cartman 4AWG 18-Inch Battery Inverter Cables Set, 4Gauge x 18" (1 Positive & 1 Negtive) for Car, Truck, RV, Solar
  • 4 AWG wire, fits 3/8" stud, SAE 4 GAUGE COPPER
  • Zinc plated 95% copper lugs for superior corrosion and oxidation resistance
  • Better stamping process to improve the current and reduce the resistance.
  • Boat cable wire stays ultra flexible even in the most extreme conditions
  • Heat-resistant up to 105C
Bestseller No. 2
Energizer Jumper Cables for Car Battery, Heavy Duty Automotive Booster Cables for Jump Starting Dead or Weak Batteries with Carrying Bag Included (16-Feet (6-Gauge)
  • ENERGIZER 16 FEET JUMPER CABLES - 6 Gauge, 16 FT booster battery jumper cables for jump starting a dead or weak battery. Ideal for trucks, SUVs, full-size cars, mid-size cars and small/compact cars
  • THICK VINYL COATING - Includes a strong spring and a comfortable handle for secure placement and easy positioning. Thick vinyl coating for protection against rust and corrosion.
  • CARRYING CASE INCLUDED - Our Energizer jumper cables come with a high-grade travel bag for easy transport and compact storage.
  • TANGLE FREE CCA BOOSTER CABLES - 16 Foot length makes it easy to reach from one car battery to another. Copper clad aluminum cables remains flexible even at -40°C.
  • THE BRAND NAME YOU CAN TRUST - 2 Years Warranty! We are here to power your car battery and truck with our booster jumper cables. We keep you going and going!
Bestseller No. 3
2 AWG 2 Gauge Red + Black Pure Copper Battery Cables Power Inverter Wire Set for Solar, RV, Car, Boat, Automotive 12in 3/8 in Lugs (2PCS)
  • Include: 2 cables, this 2awg (2 ft) battery cable contains a positive (red) and a negative (black) power inverter cable. There is a 3/8” ring on each end.
  • Material: Pure oxygen-free copper wiring for maximum conductivity. Copper terminals are tin-plated to minimize corrosion, and the oxygen-free copper wiring is a 105 degree flame-retardant outer skin.
  • Protective cover: PVC insulating sheath, flexible PVC insulation of battery cable, wear-resistant, waterproof, moisture-proof, flame-retardant and heat-insulating, can withstand the harsh test of the car or marine environment, please rest assured to buy.
  • Application: 2 positive and negative cables are widely used in various equipment, and are ideal for heavy-duty vehicles, solar energy, motorcycles, RVs, lawn equipment or inverter batteries.
  • Warranty: This Battery Cables will come with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If you don't like it, just return it and get a full refund, All we wanna do is to make you love Bestway products.
Bestseller No. 4
Ampper 5 AWG Battery Cable Set, 20 Inch Copper Power Inverter Cables with Terminals for Car, Vehicle, RV, Solar Application and More (3/8" Ring, 1 Set)
  • Heavy Duty: one set of 5 gauge wire positive (red) and negative (black) copper battery cables, 20 inch for every cable.
  • Easy to Use: each cable have 2 pcs 3/8" (M10) round center hole terminals (already crimped) on both ends, fit for 3/8" (M10) stud.
  • High Quality: copper cables for maximum power transfer, nickel plated copper lugs for superior corrosion and oxidation resistance.
  • Safe & Durable: premium PVC insulated jacket for the cables, cable ends are sealed with heat shrink tubing for heat insulation.
  • Compatible: used for car, vehicle, RV, solar application, boat and more, also used for electrical equipment.
Bestseller No. 5
4 AWG Battery Cable 4AWG Gauge Pure Copper Battery Inverter Cables with 3/8 in Lugs Both Ends Power Inverter Wire Set for Automotive Solar Marine Boat RV Car Motorcycle Red and Black (4FT)
  • Fit for Automotive Solar Marine Boat RV Car Motorcycle
  • 4 gauge battery/welding cable with 3/8 " lugs; Battery Cable Length: 4 Feet
  • Package will come with each one of the red and black cable, each cable end is sealed with heat shrink tubing for heat insulation
  • Copper Cable lugs are made of solid copper with a tin plating cover for corrosion protection
  • Please feel free to contact us if you have any questions about our products, your satisfaction would be our greatest motivation
Bestseller No. 6
1/0 Gauge Wire(20ft Each - Red/Black) Copper Clad Aluminum CCA - Primary Automotive Wire,Car Amplifier Power & Ground Cable, Battery Cable for Car Audio Speaker,Solar, Auto, RV Trailer & Marine
  • 1/0 GAUGE 20-FEET(6m) OF EACH COLOR BLACK & RED CCA POWER GROUND WIRE - The lower the gauge number, the thicker the wire. Thicker wire presents less resistance to current flow. Copper coated aluminum gives you an economic power cable with excellent power transfer.
  • HIGH QUALITY MATERIALS - High quality stranded CCA wire offers strong power transfer performance, while remaining lightweight with maximum flexibility.Oxygen Free Coppe(OFC) wiring provides a superior electrical conductor to aluminum because it does not expand or contract with heat and can carry a higher current load.
  • RUGGED PVC JACKET - Low memory, flexible soft-touch jacket material is perfect for routing in hard to reach places,designed for the electrical and auto repair installer in mind. Strong, yet durable pvc jacket has has flexibility, elasticity, and impact resistance built in,is resistant to extreme temperatures, liquid, oil, gas, abrasions and high impact.
  • PACKAGE - 2 pcs 1/0 gauge black/red CCA power ground wire(20 feet of each color);10pcs 1/0 AWG-3/8" Battery Lugs;10pcs 1/0 AWG-5/16" Battery Lugs;20pcs 3:1 Dual Wall Adhesive Heat Shrink Tubing.
  • WIDE COMPATIBILITY - Our bundled power wire set is great for a car amplifier or subwoofer or to be used as a ground wire on your electric wire installs. Use for many different applications such as indoor lighting, car radio, automotive, lighting, car speakers, power cables, 12v power inverter, ground wire, or welding cable.
Bestseller No. 7
A ABIGAIL 2 AWG Battery Cable 2AWG Gauge Pure Copper Battery Inverter Cables with 3/8 in Lugs Both Ends Power Inverter Wire Set for Automotive Solar Marine Boat RV Car Motorcycle Red and Black (1FT)
  • 【High Quality】A ABIGAIL battery cables are made of pure copper and tinned copper lugs with superior corrosion and oxidation resistance, which improves the oxidation resistance of copper and maintains its conductivity better.
  • 【Safe & Durable】Premium flexible PVC insulated jacke of battery cables which resists abrasion, waterproof and moisture proof, flame retardant and heat insulation, cable ends are sealed with heat shrink tubing for heat insulation.
  • 【Wide Application】Our positive and negative cables are widely used for car automotive, solar, marine, RV, motorcycle, golf cart, lawn/garden equipment or power inverter batteries, also used for electrical equipment.
  • 【Package Includes】With 2 AWG 12 Inch wire positive (Red) and negative (Black) copper battery cables, 3/8” ring terminal at each end.
  • 【Service】100% satisfaction guarantee, If you have any issues with the part, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.
Bestseller No. 8
2 Gauge Battery Cable 2Ft Copper Power Inverter Wire with 3/8" Lugs, Marine Battery Cables for Solar Car Boat RV (2pcs)
  • Sold as a set: 2 gauge battery cable, includes 1x positive(red) and 1x negative(black) cable. Length: 2ft, Gauge: 2AWG, fits 3/8" stud.
  • Durable material: The copper 2 gauge battery cable lugs are tinned coated, well crimped, and utilize a closed end design for corrosion protection.Heat-resistant up to 105C.
  • Easy to connect: These flexible 2 gauge battery cable are made with thinly stranded pure copper, making them easy to handle an install ,It can also be used normally in extreme environments.
  • Use for: Marine battery cables are to withstand harsh environments. 2 gauge battery cable is ideal for various equipments, inverter batteries, cars, solar energy, RV, boat, etc.
  • Warranty: 1 year warranty, 30 days worry-free return, if you have any questions, our customer service will be online 24 hours a day. You can buy our 2 gauge battery cable with confidence.
Bestseller No. 9
6 AWG Battery Cables 6 Gauge Battery Power Inverter Cable with 5/16 Inch Tinned Copper Lugs Both Ends for Solar Marine Boat RV Car Motorcycle 2 pcs (3FT)
  • The battery cable replacement is designed to fit for automotive, solar, marine, boat, rv, car, motorcycle, etc
  • Package comes with 2 pcs 6 AWG battery cables, each cable has two 5/16 inch tinned copper ring terminals
  • Wires have 5/16 inch hole allowing it to fit over battery disconnects/switches. The tinned copper wires prevent corrosion and allow for more easily soldering
  • Temperature Range: -45°C to +105°C; Length: 3FT
  • Please carefully check all the product information to make sure this is the right one you want before purchasing
Bestseller No. 10
GearIT 8 Gauge 25ft Black/Red CCA Wire - For Automotive Power/Ground, Battery Cable, Car Audio, RV, Trailer, Amp
  • COPPER CLAD ALUMINUM (CCA) - Our primary cable CCA wire is the most economical option for choosing power or ground wire and is a great conductor of power. Copper coated aluminum gives you an economic power cable with excellent power transfer. Systems that require more power should use ofc cable wiring.
  • POWER / GROUND WIRE SET - Our bundled power wire set is great for a car amplifier or subwoofer or to be used as a ground wire on your electric wire installs. Use for many different applications such as indoor lighting, car radio, automotive, lighting, car speakers, power cables, 12v power inverter, ground wire, or welding cable.
  • SOFT TOUCH JACKET - Soft touch jacket design designed for the electrical and auto repair installer in mind. Strong, yet durable pvc jacket that is best for indoor use but has flexibility, elasticity, and impact resistance built in.
  • EASY POLARITY IDENTIFICATION - Easy color coded ground wire helps with installation to let you know which cable should connect to the terminal. Making a polarity error could cause serious damage to your audio equipment.
  • WIDE COMPATIBILITY - Also known as power wire, ground wire, trolling motor wire, automotive wire, speaker wire, car radio wire, amp wire, electrical wire, or welding wire designed for up to 300v voltage. We have many gauge wires to choose from, such as 1/0awg, 4awg, 8awg with black, red, blue wire color options and 25ft, 50ft lengths

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...