| “This site contains affiliate links for which OEMDTC may be compensated” |
March 14, 2018 NHTSA CAMPAIGN NUMBER: 18V172000
Front Axle Spindle may Fracture
A wheel separation from the vehicle can increase the risk of a crash.
NHTSA Campaign Number: 18V172
Manufacturer Kovatch Mobile Equipment Corp.
Components SUSPENSION
Potential Number of Units Affected 12
Summary
Kovatch Mobile Equipment Corp. (KME) is recalling certain 2007-2012 KME Predator Pumper, 2013 Predator SS Aerial, 2007 Predator Aerial, 2008-2011 Predator Rescue, and 2007 Predator Tanker vehicles, equipped with Timoney Independent Front Suspensions. Inconsistent machining may result in fatigue cracks developing over time in the front axle spindles, causing failure of the spindle and the possible separation of a front wheel from the vehicle.
Remedy
KME will notify owners, and dealers will replace the front axle spindle, free of charge. The recall began on May 2, 2018. Owners may contact KME customer service at 1-800-235-3928.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
May 1, 2018
Name
Address
City, State Zip
IMPORTANT SAFETY RECALL NOTICE: 18V172
IMPORTANT SAFETY RECALL
This notice applies to your vehicle(s):
Dear KME Vehicle Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Why is a recall being conducted?
KME has decided that a defect which relates to motor vehicle safety exists in certain model year 2007-2013 KME vehicles manufactured from June 2006 through December 2012 equipped with Timoney Gen 2 Strider Independent Front Suspensions.
KME has been informed by Timoney Technologies that, on certain Timoney Gen 2 Strider independent front suspension front axle spindles, inconsistent machining operations could cause stress risers in the spindle that could cause long-term durability failure. Over time and under certain harsh duty cycles, a fatigue crack could develop in the spindle, causing failure of the spindle and possible separation of the wheel from the vehicle, which increases the risk of a crash.
What are we doing about the problem?
KME will be shipping spindle rebuild kits, necessary tooling and installation instructions to KME Dealers for them to install the new components on the affected trucks. Vehicles subject to this recall are to be repaired by a KME certified Dealer or technician. KME will compensate the dealer or owner for installing the new components. The components and labor are provided free of charge. The installation should take approximately 4 hours.
What should you do?
If you receive this notification, please contact your KME Dealer or KME Customer Service at (570) 669-5230 to schedule an appointment to have the installation of the spindle kits performed.
INCLUDED WITH THIS LETTER IS AN OWNER RESPONSE CARD THAT MUST BE FILLED OUT AND RETURNED TO KME IN ORDER TO BE REIMBURSED. Please have your Truck VIN or GSO available. After the repair has been completed, please fill in the appropriate information on the enclosed Owner Response Postcard, sign it, and return it to:
Mail: KME, One Industrial Complex, Nesquehoning, PA 18240
E-mail: bpolgrean@kmefire.com
Fax: (570) 645-9705
What if you no longer own this vehicle?
If you are not the current owner of the vehicle, please indicate this on the Owner Response Postcard and return the card to us.
Federal law requires any lessor who receives a notification of a safety related defect or noncompliance pertaining to any leased motor vehicle shall send the notice to the lessee within 10 days. If you are no longer the owner of this vehicle, please provide us with any contact information so we may contact the new owner.
If you have already paid to have your vehicle repaired for this condition, you may be eligible for reimbursement of the charges you paid for the repair or replacement of components. To learn more about what you need to do to obtain reimbursement, contact our customer service department.
If after having attempted to take advantage of this recall you believe you have not been able to have your vehicle remedied without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this safety recall may cause, but your safety is our first concern.
Sincerely,
KME, Inc
April 23, 2018
SAFETY RECALL NOTICE: 18V172
TO: Affected KME Dealers
KME has decided that a defect which relates to motor vehicle safety exists in certain model year 2007-2013 KME vehicles manufactured from June 2006 through December 2012 equipped with Timoney Gen 2 Strider Independent Front Suspensions. Accordingly, a recall to address this issue is expected to start on or before May 4, 2018.
KME has been informed by Timoney Technologies that, on certain Timoney Gen 2 Strider independent front suspension front axle spindles, inconsistent machining operations could cause stress risers in the spindle that could cause long-term durability failure. Over time and under certain harsh duty cycles, a fatigue crack could develop in the spindle, causing failure of the spindle and possible separation of the wheel from the vehicle, which increases the risk of a crash.
Owners will be notified by mail about the recall and will be instructed to contact their KME Dealer or KME to schedule an appointment to have the replacement of the spindles performed. There is no cost to owners for this recall.
KME is providing, free of charge, spindle rebuild kits, necessary tooling and installation instructions to KME Dealers for them to install the new components on the affected trucks.
Please be reminded that it is a violation of Federal law for you deliver a new motor vehicle or any new or used item of motor vehicle equipment covered by this notification until this defect has been remedied. Substantial civil penalties apply to violations of this law.
Your assistance with this recall is appreciated. Should you have any questions or concerns, please contact me or KME Customer Service at (570) 669-5230.
Sincerely,
13 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| KME | PREDATOR AERIAL | 2007 |
| KME | PREDATOR PUMPER | 2007-2012 |
| KME | PREDATOR RESCUE | 2008-2011 |
| KME | PREDATOR SS AERIAL | 2013 |
| KME | PREDATOR TANKER | 2007 |
7 Associated Documents
Recall Acknowledgement
RCAK-18V172-6137.pdf 245.828KB
Loading...
Reload document 
Open in new tab
Defect Notice 573 Report
RCLRPT-18V172-5312.pdf 216.721KB
Loading...
Manufacturer Notices(to Dealers,etc)
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-18V172-2404.pdf 133.892KB
Loading...
Recall Quarterly Report #2, 2018-3
RCLQRT-18V172-5374.PDF 214.599KB
Loading...
Recall Quarterly Report #3, 2018-4
RCLQRT-18V172-1307.PDF 211.31KB
Loading...
Recall Quarterly Report #4, 2019-1
RCLQRT-18V172-5057.PDF 211.412KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V172&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
- Lubrimatic 11-316 1 Lb Multi-Purpose Grease
- Long lasting, hard working formula delivers high performance in a wide range of heavy-duty applications
- Recommended for chassis, universal joints and other general purpose applications around the home, farm or shop
- Works best for lubricating rolling parts
- Nlgi 1-1/2; Drop point 350 degrees F; pumps to -10 to -15 degrees F
- Patented synthetic NLGI grade 2 heavy-duty, multipurpose lubricant
- Dielectric, Food Grade, Clean
- NSF Rating H-1, safe for incidental food contact
- Will not drip, run or evaporate
- Lithium complex grease designed for multipurpose everyday applications
- Excellent grease for agriculture equipment, powersports equipment, automotive grease lube points, ball joints, bushings, chassis lubrication, electric motors, gears, plain bearings, presses, roller bearings, tie-rod ends, steering knuckles, trailers, hitch ball, universal joints, wheel bearings, winches
- Mechanics choice for automotive grease applications and truckers choice for fifth wheel (5th wheel) grease
- Superior water resistance, extreme pressure and high temperature protection suitable for scheduled maintenance greasing of journal and anti-friction bearings, chassis fittings, springs, water pumps, universal joints, non-disc brake wheel bearings, lawn mower equipment, power tools and more!
- Typical industries include automotive, car, truck, motorcycle, ATV, boat, construction, mining, drilling, and several industrial applications
- Superior Automotive Silicone Lubricant: This silicone lube is uniquely formulated to be gentle on most materials, ensuring it won't damage or corrode surfaces over time. Ideal for use as a brake lubricant, it also functions effectively as a sealant for automotive components.
- Moisture Barrier Protection: It acts as an effective barrier against moisture, helping to prevent rust and corrosion on metal surfaces in your vehicle. Use it on windows, doors, and even in the garage for long-lasting protection.
- Heat and Moisture Resistant: Unlike traditional oils and lithium grease, this silicone grease maintains its integrity under high temperatures and in moist conditions, ensuring it won't deteriorate over time. This makes it an excellent choice for lubricating brake slide pins and door hinges.
- Waterproof and Moisture-Proof: This multipurpose grease creates a reliable, waterproof, and moisture-proof barrier on a variety of surfaces, making it perfect for automotive use, including on O rings and other sensitive parts.
- Convenient Application: The product comes with an easy-to-use brush top lid, allowing for precise and hassle-free application. This feature is particularly useful when applying the lubricant to intricate parts like brake components and door mechanisms, ensuring comprehensive coverage with each use.
- auto & truck maintenance
- country of manufacture: united states
- manufacturer: valvoline
- product packaging may vary
- Flash point: 491.0 degrees_celsius
- PREMIUM ALL-PURPOSE GREASE: AtomLube All Purpose Grease (NLGI #2) combines three premium grease options (heavy-duty grease, multi-purpose grease, and marine grease) for use across an extended range of applications. Includes 2, 14 oz. grease tubes.
- MADE IN THE USA: We proudly design and manufacture our products in the USA. You can use AtomLube All Purpose Grease with confidence, knowing that our products have been perfected for your mechanical protection.
- LONGER LASTING LUBRICATION: This general purpose grease has a high resistance to oxidation and washout to guarantee extended service life and longer lubrication intervals. It provides lasting protection during periods of extreme pressures and high temperatures.
- HIGH-PERFORMANCE LUBRICANT: This powerful, waterproof grease eliminates friction and corrosion. AtomLube All Purpose Grease develops strong adhesion to metal surfaces for strong stay-in-place power even in severe operating conditions.
- NLGI CERTIFIED: Our all-purpose grease meets the National Lubricating Grease Institute (NLGI) performance classification GC-LB for automotive applications in wheel bearing and chassis grease.
- HEAVY-DUTY PERFORMANCE: ABRO #3 Synthetic Lithium Grease provides water-resistant, heavy-duty protection for automotive and marine uses.
- MULTIPURPOSE LUBRICANT: Ideal for maximum protection of wheel bearings, suspension systems, universal joints, steering linkages, and chassis.
- TAILORED FOR HIGH RPM ENGINES: This lithium grease is designed for high RPM and fuel-efficient engines to ensure smooth operation.
- SAFEGUARDING FEATURES: Offers maximum protection to essential car components, reducing friction and preventing premature wear.
- PREMIUM LITHIUM GREASE: High-quality grease for cars, formulated for long-lasting performance in diverse applications and conditions.
- HEAVY DUTY RED GREASE: AtomLube Ultra Heavy Duty Red Grease (NLGI #2) is a multi-purpose high-performance lubricant designed for extended chemomechanical durability. This essential chassis bearing grease has outstanding extreme-pressure lubrication and wear protection. Includes a 2-pack of 14 oz. tubes.
- HIGH-PERFORMANCE LUBRICANT: This powerful, waterproof grease eliminates friction and corrosion. AtomLube Heavy Duty Red Grease develops strong adhesion to metal surfaces for strong stay-in-place power even in severe operating conditions.
- LONGER LUBRICATION INTERVALS: This heavy duty red grease has a high resistance to oxidation and washout to guarantee extended service life and longer lubrication intervals. It provides lasting protection during periods of extreme pressures and high temperatures.
- PROLONGS EQUIPMENT LIFE: Our nano-engineered red grease penetrates complex machine surfaces to protect equipment mechanisms, extend service intervals, and prolong useful life of equipment.
- NLGI CERTIFIED: Ultra Heavy Duty Red Grease meets the National Lubricating Grease Institute (NLGI) performance classification GC-LB for automotive applications in wheel bearing and chassis grease.
- Engage in superior antiwear and antifriction control that ensures smooth operations even under extreme pressure conditions. Remarkable extreme pressure additive package tailored for high-load scenarios, vibrations, and other severe applications.
- Especially recommended for environments where loads and temperatures are high, including situations of occasional impacts due to equipment overload. Extends its use to gearboxes, making it a flexible choice for diverse operating conditions and designs.
- Outstanding pumpability and smooth, stringy texture facilitate easy applications and consistent lubrication. Exhibits high mechanical stability and high adhesion, making it a dependable solution for centralized systems.
- High resistance to water washout and excellent rust and corrosion preventive properties make it suitable for applications where equipment is exposed to water contamination.
- Ideal for trucks, rolling mills, transfer tables, mining equipment, paper mills, crushers, or shredders, and meets the requirements of NLGI GC-LB in accordance with ASTM D4950.
Last update on 2024-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.