“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10172204
Manufacturer Communication Number: K09201017
Summary
Correct Aftermarket Installation Of Permanent Electronic Log Devices ( ELD )( Qualcomm, PeopleNet, Omnitracs, GPS, Location Tracker, Etc.) RP1226 connection On The Data Link; Installation Instructions And Information For Third Party ( Aftermarket ) Devices Connected To The Data Link – US17+OBD16 And Newer Emissions, Models Built up to Week 37 (9/13) 2019.
47 Affected Products
Vehicles
MAKE | MODEL | YEAR |
MACK | ANTHEM | 2016 |
MACK | ANTHEM (AN) | 2017-2019 |
MACK | GRANITE (GR) | 2016-2019 |
MACK | PINNACLE (PI) | 2018-2019 |
VOLVO | VAH | 2013-2019 |
VOLVO | VHD | 2013-2019 |
VOLVO | VN | 2013-2019 |
VOLVO | VNL | 2013-2019 |
VOLVO | VNR | 2018-2019 |
VOLVO | VNX | 2013-2019 |
Title
Correct Aftermarket Installation Of Permanent Electronic Log Devices ( ELD ) ( Qualcomm, PeopleNet, Omnitracs, GPS, Location Tracker, Etc.) RP1226 connection On The Data Link; Installation Instructions And Information For Third Party ( Aftermarket ) Devices Connected To The Data Link – US17+OBD16 And Newer Emissions, Models Built up to Week 37 (9/13) 2019.
Cause
An aftermarket device improperly installed on the data link can cause a variety of symptoms. Various Data Link codes can be generated from any modules connected to the affected circuit. In addition, interference can create a variety of physical symptoms that may or may not seem to be related. Some examples are intermittent loss of throttle, incorrect or no readings from instrument cluster gauges, regeneration failure, and derate.
Recent models of third party devices in many cases utilize either a “T” or “Y” connector that connects to the OEM Diagnostic connector, or will place the module in-line so the diagnostic connector mounted to the dash is in fact a diagnostic connector from the third party device. A diagram showing these two situations can be seen below:
Solution
IMPORTANT:
- Do not daisy chain more than 2 overlay harnesses.
- 3rd party connecting harness length should not be more than 1 meter in length.
- 3rd party devices must not be connected to the main diagnostic connector under the steering wheel.
- 3rd party devices must be listen-only or passive mode.
- 3rd party devices must not use power with key off to avoid battery drain.
- The truck must maintain all factory install terminating resistors in the harness.
- All newer trucks will have the RP1226 connector installed on the Cab Harness DL5 located in the FRC.
An OEM overlay harness is available that should always be utilitzed to connect modules meeting the above specifications to the vehicle data link. Refer to the pictures and part numbers below.
23295912 = Connects to the vehicle and terminates to a RP1226 connector.
23295906 = From the RP1226 to a 9 pin connector.
23295908 = From the RP1226 to a 16 pin connector.
Installation instructions and information for the overlay harness can be found by searching for Operation 3751-03-02-08 Datalink Overlay Harness, New Install. Electronic Logging Device Harness, Installation in the Service tab of Impact. ( Mack, Volvo )
If the operation does not show up when using the VIN, remove the VIN and enter the chassis model.
Note: Make certain the harness is connected to DL1 and not DL3.
37552-2 Datalink Overlay Harness, New Install
Electronic Logging Device Harness
Illustrations may differ slightly from the actual vehicle being serviced. However, key components addressed in this information are represented as accurately as possible.
All threaded fasteners that do not have a tightening torque specification in the information are tightened to a standard torque. Standard torques are available in the following specification.➠ Standard Tightening Torques
- Park the vehicle on a level surface with the steering wheel in the straight ahead position.
- Apply the parking brake.
- Place the gear lever in neutral.
- Install the wheel chocks.
- Disconnect the cable from the negative terminal.
- Remove the trim.
- Remove the trim.
- Remove the panel.
- Remove the screws.
- Remove the panel.
- Disconnect the connectors.
- Remove the screws.
- Remove the panel.
- Identify the necessary cable harness connectors.
Power and Ground Connections
Item | Label Content | Description |
1 | F28-A BATT GND | Cab battery connection. |
2 | F32-D IGN GND | Cab ignition connection. |
- Identify the necessary cable harness connectors.
Data link Overlay Connections
Item | Label Content | Description |
1 | DL1 | J1939 connection |
2 | N/A | Terminating resistor |
3 | N/A | J1587 connector |
- Connect the connectors.
Data link Overlay Connections
Item | Label Content | Description |
1 | F28-A BATT GND | Cab battery connection. |
2 | F32-D IGN GND | Cab ignition connection. |
3 | BATT | Overlay harness battery connection. |
4 | IGN | Cab ignition power connection. |
- Transfer the terminating resistor to the overlay cable harness.
- Connect the connectors.
Power and Ground Connections
Item | Label Content | Description |
1 | N/A | Terminating resistor.
Note Transferred from cab harness J1939 connector. |
2 | TERMINATING RESISTOR | Overlay harness terminating resistor connection. |
3 | DL1 | Cab harness J1939 connection. |
4 | J1939 | Overlay harness J1939 connection. |
5 | N/A | Cab harness J1587 connection. |
6 | J1587 | Overlay harness J1587 connection. |
7 | FUTURE J1587 | Spare J1587 for future use. |
Fuse Location | Fuse Type |
F28 | 10 amps |
F32 | 10 amps |
- Route the wiring harness.
Note
Ensure that the cable harness does not rub along any sharp edges.
- Install the panel.
- Install the screws.
- Torque-tighten the screws.
Tightening torque
Dashboard, panel, screw
M5
8 ±2 Nm
(6 ±1 lbf⋅ft)
- Connect the connectors.
- Install the panel.
- Install the screws.
- Torque-tighten the screws.
Tightening torque
Screw
M5
3.1 ±0.8 Nm
(27 ±7 lbf⋅in)
- Install the panel.
- Install the trim.
- Install the trim.
- Connect the cable to the negative terminal.
- Remove the wheel chocks.
SEOCONTENT-STARTSolution K09201017
Monday, March 2, 2020 7:35:35 PM CET
** SOLUTION **
Title
Correct Aftermarket Installation Of Permanent Electronic Log Devices ( ELD )
( Qualcomm, PeopleNet, Omnitracs, GPS, Location Tracker, Etc.) RP1226
connection On The Data Link; Installation Instructions And Information For
Third Party ( Aftermarket ) Devices Connected To The Data Link –
US17+OBD16 And Newer Emissions, Models Built up to Week 37 (9/13)
2019.
Mack Models
Mack Model AN – Anthem , GR – Granite , PI – Pinnacle
Volvo Models
Volvo Model VN , VNL , VNR , VNX , VAH , VHD
Emission Standard
Emission Standard US17 , US17+OBD16 , US17+OBD18 , US17+OBD19
** SOLUTION **
Cause An aftermarket device improperly installed on the data link can cause a
variety of symptoms. Various Data Link codes can be generated from any
modules connected to the affected circuit. In addition, interference can
create a variety of physical symptoms that may or may not seem to be
related. Some examples are intermittent loss of throttle, incorrect or no
readings from instrument cluster gauges, regeneration failure, and derate.
Recent models of third party devices in many cases utilize either a “T” or “Y”
connector that connects to the OEM Diagnostic connector, or will place the
module in-line so the diagnostic connector mounted to the dash is in fact a
diagnostic connector from the third party device. A diagram showing these
two situations can be seen below:
3/2/2020 Print Case
https://secure4.volvo.com/cbr/printCase.action?caseId=367840 2/4
Solution IMPORTANT:
– Do not daisy chain more than 2 overlay harnesses.
– 3rd party connecting harness length should not be more than 1
meter in length.
– 3rd party devices must not be connected to the main diagnostic
connector under the steering wheel.
– 3rd party devices must be listen-only or passive mode.
– 3rd party devices must not use power with key off to avoid battery
drain.
– The truck must maintain all factory install terminating resistors in the
harness.
– All newer trucks will have the RP1226 connector installed on the
Cab Harness DL5 located in the FRC.
An OEM overlay harness is available that should always be utilitzed to
connect modules meeting the above specifications to the vehicle data link.
Refer to the pictures and part numbers below.
23295912 = Connects to the vehicle and terminates to a RP1226
connector.
3/2/2020 Print Case
https://secure4.volvo.com/cbr/printCase.action?caseId=367840 3/4
23295906 = From the RP1226 to a 9 pin connector.
23295908 = From the RP1226 to a 16 pin connector.
Installation instructions and information for the overlay harness can be found
by searching for Operation 3751-03-02-08 Datalink Overlay Harness, New
3/2/2020 Print Case
https://secure4.volvo.com/cbr/printCase.action?caseId=367840 4/4
Install. Electronic Logging Device Harness, Installation in the Service tab of
Impact. ( Mack, Volvo )
If the operation does not show up when using the VIN, remove the VIN and
enter the chassis model.
Note: Make certain the harness is connected to DL1 and not DL3.
Solution visibility Dealer distribution
Function(s)/component(s) affected
Function affected Diagnostic tool , electricity
Function Group
Function Group 375 cable system, cab , 881 instrument and radio panel
Customer effect
Main customer effect power supply , diagnostics/methodology , efficiency/abnormal behavior ,
fault code/display
Conditions
Vehicle operating
mode
when driving , when stationary
Frequency of
occurrence of problem
always
Other conditions after a workshop procedure on the vehicle
Administration
Author RU2761V
Dealer ID RU4469V
Last modified by A241298
Creation date 16-10-2018 15:10
Date of last update 03-02-2020 21:02
Review date 01-07-2019 00:07
Status Published
Average score 0
Number of scores 1
NA_Reviewer UT5061H
UNCONTROLLED COPY. Printed document is for temporary use only and should not be retained.
Printed by:BRADLEY PICKENS
Service
Chassis ID Path
3751/Repair//Datalink Overlay Harness, New Install. Electronic Logging Device Harness
Model Identity
VN 142974426
Publish date ID/Operation
9/21/2018 3751-03-02-08
1 / 18
Copyright to this documentation belongs to the Volvo Group. No reproduction, copying, change, amendment or other similar disposal is entitled without prior written consent by
the Volvo Group
The information contained herein is current at the time of its original distribution, but is subject to change. The reader is advised that printed copies are uncontrolled.
K09201017
https://www.nhtsa.gov/recalls?nhtsaId=10172204
https://static.nhtsa.gov/odi/tsbs/2020/MC-10172204-9999.pdf
- 🍇➤Please Note: 1. The HD OBD option is available for heavy truck owners and the OBD/EOBD option is available for other vehicle. 2. Owners need to fix the problem with the truck first before they need clear the error code.
- 🍉➤【Support Full Systems for Heavy Duty Truck】 NL102 PLUS supports read and clear DTC, live data, ECU information for truck all systems. Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more, which are in compliance with J1939, J1708 and J1587 protocols, It includes almost American HD trucks(Class4-Class8), it is recommended that customers confirm before purchase that if they comply with the years and agreements supported by NL102P before purchasing.
- 🍋➤【Professional DPF Regeneration Tool】Force DPF Regen work on Cummings, Detroit, Maxxforce, ISUZU, HINO engine,It covers almost all US trucks, supported advanced features: DPF Regeneration,D-O-C Cleaning Procedures, DPF Regeneration in Parking, DPF Regeneration in Driving, DPF Onboard. NL102P's tool helps you re-awaken the engine power When the diesel p-articulates of the engine accumulate. It will save $800-$2500 for truck owners a year.
- 🍊➤【Excellent Oil Light Reset】NL102 PLUS support Oil service reset work on Cummings, Detroit, Maxxforce engine. when the replacement of engine oil is done, the truck system calculates when to change the engine oil and filter based on vehicle use. An oil change is required whenever indicated by the display, otherwise it will affect the engine maintenance and life. The NL102P truck scanner offers help to reset the Oil Life Reminder (Determine the Oil Service Light), ensure your driving safety.
- 🍐➤【All OBD/EOBD Diagnosis】NL102 PLUS supports both all 12V and all 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. NL102 PLUS can read and earse the trouble codes, determine the MIL (check your Truck engine) and I/M Readiness, Freeze Frame, Live Data, O-xygen Sensor Test, On-Board Monitor, Vehicle Identification Info. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair. In order to ensure that you can use the NL102P, please check the manual before purchasing.
- 🔥2024 TOP INTELLIGENT DIAGNOSTIC SCANNER FOR SEMI COMMERCIAL: ANCEL V5 HD obd2 scanner is specifically designed for 12V & 24V semi trucks,pickup trucks,heavy-duty trucks and 99% of commercial vehicles.you will enjoy✅All System Diagnostic;✅40+ Special Functions;✅ Full Bi-directional Test; ✅Advanced ECU Coding;✅Exclusive Remote Diagnosis Assistance;✅Full System Diagnostic ;✅Wider Vehicle Coverage;✅ Full HD OBD /OBDII /EOBD Modes;✅Top-level Hardware;✅>2 Yrs Free Update,Lifetime Tech Support
- 🚚40+ Resets with ABS SRS DPF Regen: ANCEL V5 HD includes 40+ resets for various systems, including ABS, SRS, DPF, EPB, BMS,DPF Regen, Injector Coding,Parameter Setting,Idle Speed Adjustment, Speed Limit Adjustment and more to fully meet your various needs. These resets can help reset the vehicle's systems to their default settings, eliminating any error codes or malfunctions that may be causing problems.Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛FULL BI-DIRECTIONAL CONTROL, GET YOU TO MALFUNCTIONS DIRECTLY:ANCEL V5 HD bidirectional scan tool supports bidirectional testing, which means it can both read and erase fault codes from the vehicle's ECUs.This feature saves time and money by eliminating the need for multiple scanners or tools.you can quickly identify whether the repair job works or not:Aftertreatment Test, Injector Test,Fuel Pump Test,Cylinder Test,Enigne State Monitor,A/C Compressor Test,Heated Oxygen Sensor Test and more.
- 🚜ADVANCED ECU CODING & PROGRAMMING:ANCEL V5 HD diesel truck scan tool comes with a powerful ECU programming and coding function, allowing you to reprogramme and decode the electronic control units (ECUs) of the vehicle.This feature is especially useful for technicians who need to update software,adjust parameters,or perform other modifications to the vehicle's electronic systems.🚦Note: ECU Coding is not universal to all cars, please check compatibility with VIN before order.
- 🚌OE-Level Full System Diagnostic:ANCEL V5 HD code reader is a professional-grade truck scanner that covers almost all the systems in semi-commercial vehicles, including engine, transmission, ABS, SRS, airbag,instrument panel, etc.It provides accurate and comprehensive diagnostic results,helping you quickly identify and solve vehicle problems,which are in compliance with J1939, 1708,ISO14230,ISO15765,ISO9141,ISO11898,E-J1850 VPW,SAE-J1850 PWM,J1587,CAN TP16,CAN TP20,AN-FD,and DOIP protocols.
- 🔥🔥🔥2024 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD heavy duty truck scan tool 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>40+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
- 🚛Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch diesel truck scan tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- 🚛40+ Reset Functions & Bidirectional Control - 2024 newest top truck scanner diagnostic tool, comes with 40+ special services (ECU, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel scanner diagnostic tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD truck scanner not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
- 🔎【Comprehensive Full Systems Diagnostic Tool For Truck】Launch Heavy Duty Truck Diagnostic Tool offers OE-Level diagnosis for all systems of heavy truck/Pickups/Bus/Van in compliance with OBD-II Communication Modes 1-10 and J1587, J1708 and J1939 protocols,Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more.
- 🔥【All OBD/EOBD Diagnosis】This truck scanner diagnostic tool supports both most 12V and 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. Our truck scan tool can read codes, erase codes, I/M Readiness, Live data, EVAP Test. . . etc for obd2/eobd cars. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair.
- 🚚【Wide Truck Applications】Heavy duty truck scan tool covers almost J1587, J1708 and J1939 protocols heavy duty trucks and OBD II vehicles. Such as Cummins, Paccar, Detroit, Perkins, International, Peterbilt, Allison, Eaton, Ford duty trucks and so on, Covers class 4 (14,001 lbs) through class 8 (33,000 lbs and over) heavy duty trucks. One that meets all the requirements! NOTE:Compatibility will vary on vehicles model and year, please send V-IN to check the compatibility before purchase.
- 💡【Friendly Design, Easy of Use】This heavy duty diagnostic scan tool is plug and play, simple and convenient, The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- ✨【3 YEARS WARRANTY & FREE LIFETIME UPDATES】The diesel truck scanner is exclusively designed for US truck. it's come With a full service functions and full systems and provides 24/7 technical support, 3 years warranty, 90-days free return for refund or replacement. This diesel scan tool is suitable for auto repair shops and technicians.No subscription fee and free lifetime updates.
- Powerful and Cost-Effective - An essential heavy duty truck scanner designed for heavy duty truck owner-operators and small commercial fleets. With the Diesel Decoder, just plug the diesel scan tool into the diagnostic port and pair with the free smartphone app to access in-depth HD diagnostic information.
- Swift and Adaptable - This heavy duty truck scanner recognizes both diagnostic trouble codes (DTCs) and brand-specific error codes for prevalent heavy-duty truck brands in North America, such as Freightliner, Peterbilt, Mack, Kenworth, Volvo, Western Star, among others and give the ability to perform DPF regens on select model years of Cummins, International, Detroit, Isuzu, Paccar, Mercedes, Hino and Mack/Volvo.
- Instant Repair Help - The diesel scan tool seamlessly connects to the Diesel Laptops comprehensive Diesel Repair Platform library so you can immediately start diagnosing and repairing any problems and get back on the road as soon as possible.
- Continuous Enhancement - Benefit from direct feature additions and updates via the app, our heavy duty truck scanner will continue to have functionality added over time. This removes the hassle of lengthy update processes and the financial strain of renewing costly diagnostic gear.
- 🌟【Run Your DPF Cleaner, Longer -Renew, Don't Replace!】Safeguard your truck from breakdowns and and high repair costs with focused DPF care. Opt for HD3400, featuring DPF regen, reset, DPR state control, and more, tailored for engines like Cummins, Detroit, Caterpillar, etc. Imagine this: easy and cost-effective DPF regen saving you from potential $10,000 to $30,000 in repairs. Unlock compliance-free operation for improved fuel efficiency, extended engine life, and significant cost savings
- 🚜【Maximize Caterpillar Engine Trucks' Potential!】HD3400 Plus diesel scanner, exclusively for Caterpillar engines (C7, C9, C11, C13, C15, C32, and more) commonly found in trucks like Caterpillar, Ford Pick-up, Freightliner, Peterbilt, Kenworth. Features include code reading/clearing, live data streaming, ECU retrieval, DPF regeneration and more. Unleash your Caterpillar engine's power!
- 🚛【Designed for Detroit Engine Trucks】ANCEL HD3400 heavy duty truck scan tool is compatible with a wide range of heavy duty commercial trucks – class 7 and class 8, medium duty trucks, light duty trucks and semi-trucks equipped with Detroit engines, including DD13, DD15, DD16, Series 50, Series 60, MBE 900, MBE 4000, OM501, OM502, DDDL 6, and DDDL 7.
- 🚐【Designed for Paccar Engine Trucks】ANCEL HD3400 heavy-duty truck scanner diagnostic tool is specifically designed for Paccar engines, including Paccar PX-7, PX-9, MX-11, MX-13. ❗Note: PACCAR engines post-2016 require a CAN-3 adapter for forced DPF regeneration. If you want to perform DPF regen for your PACCAR engines manufactured after 2016, please find us to get the additional CAN-3 adapter.
- 🌟【Unlock Advanced DPF Regeneration】Our diesel scanner diagnostic tool excels in DPF reset, providing active/forced regeneration and advanced DPF state control. Save time and money on DPF maintenance, making it the top choice for truck diagnostics. Elevate your DPF maintenance with our advanced features!
- 【Extensive Compatibility】After the upgrade, the compatibility is wider and more accurate! HD601 PRO heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Such as Cummins, Paccar, Detroit, Perkins, Freightliner, International, Peterbilt, Ford, Class 4-Class 8 trucks, etc. It also check engine diagnosis on most cars, minivans and light trucks from 1996 and latest.
- 【OE-Level Full System Diagnostic】HD601 PRO Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool for Cummins, Caterpillar, Detroit, Perkins, Maxxforce, BendixWabash, Wabaco, Haldex, Allison, Eaton heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money.
- 【Enhanced Diesel OBD Scanner】As a 2-in-1 code reader, it supports the latest ISO27145 and Euro6 protocols and enables diagnosis of car and truck engines. In addition to reading codes, clearing codes and displaying live data in a text or graphic format for trucks, you can also retrieve vehicle information, view freeze frames and look up DTCs. To ensure that this device works with different engines, it is also equipped with 6, 9 and 16 pin cables that allow you to easily turn off the CEL light.
- 【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand the codes definition and fix the problem faster. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages.
- 【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- 【2024 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- 【J2534 Reprogramming with Smartlink C】Advanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
- 【Over 60 Service Reset Functions + Bi-Directional + ECU Coding 】This scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.
- 【2024 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- 【Wider Vehicle Coverage of 12V & 24V Vehicles + 24 Languages】LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
- 【Full Systems Heavy Duty Scanner Tool】:this heavy duty scanner tool supports Read DTC and Clear DTC, Live Data,Engine Check, Transmission, Drivetrain, Suspension, Cluster, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more, which are in compliance with J1939, J1708 and J1587 protocols,
- 【OBD2/HDOBD/EOBD All Diagnosis】: supports both all 12V and all 24V truck, with 6 pin and 9 pin adapters for different interfaces.It support reading code, earsing trouble codes, Live Data, determine the MIL (check your Truck engine) and I/M Readiness, Freeze Frame, O2 Sensor Test, On-board Monitor, Vehicle Identification Info.It can lookup DTC, translates the related code's meaning to help you know what's wrong with the car.
- 【Suitable for Most Trucks】:diesel diagnostic scanner support all truck standard protocols SAEJ1939/ J1587/ J1708,it work on heavy duty trucks/ light truck/ mini vans/ buses/ pickups from1996 to now.
- 【CANBUS System】:Detect the CANBUS node, and easily find out the wrong modoles and lines.
- 【Professional Automotive Scanner Diagnostic Tools】:Designed specifically for HDOBD/OBD2/EOBD.This HD10 covers all the functions of HDOBD,OBD2,and EOBD. What is more important is that it provide the results correctly and quickly, and you can read the results with graghs, which make you easier to read.
- 👍【2024 Newest wide Coverage for Heavy truck】: With support for standard HD OBD protocols and customized protocols, ANCEL HD3400 PRO provides 98% coverage for heavy truck models in the US market, including those with Cummins, Detroit, Caterpillar, Paccar engines,and trucks like Ford, Autocar, western star, Freightliner, Kenworth, Peterbilt, caterpillar,Terex, Thomas, Sany, Komatsu, Agrifac , Isuzu, Fuso, Hino,Volvo and more.
- 🚛【Available for Cummins 】ANCEL HD3400 Pro is specifically designed to support a wide range of Cummins engines found in trucks like Ford, Volvo, Freightliner, Kenworth, and more, as well as Sany machinery, Agrifac vehicles, RVs, and more. Compatible with ISX, ISM, ISN, QSB, X12, ISB, ISC, ISD, ISG, ISK, ISL, X15, B6.7, L9, L9N, QSM11, and other popular models.
- 🚒【Available for Caterpillar】exclusively designed for Caterpillar engines (C7, C9, C11, C13, C15, C32, and more), you can perform top-notch diagnostics to keep your trucks running reliably. Compatible with popular truck models like Kenworth, Peterbilt, Freightliner, International, Mack, and Volvo.
- 🚛【Available for Paccar&Detroit】ANCEL HD3400 PRO is compatible with a wide range of engine types, including Detroit engines (Series 50, Series 55, Series 60, OM501, OM502, DD5, DD13, DD15, DD16,MBE 900, MBE 4000, DD8, DDDL 6, DDDL 7, CPC2, CPC02T, CPC04T, CPC302T and More) and Paccar engines(PX-7, PX-9, MX-11, MX-13 and more). like medium-duty or light-duty trucks, or even semi-trucks
- 🚒【Superb Lifetime Free Update,Best Bang For The Buck】ANCEL HD3400 PRO diesel code reader allow our customers get the latest version with free update via WIFI,With Lifetime Free Update,HD3400 PRO is way more valuable by comparing with the other OBD diagnosis,which can save hundreds of dollar for our customers!
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.