“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10110435
Manufacturer Communication Number: SMB125
Summary
Service Manual Bulletin – S-1 GARD Inspection and Maintenance
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
NEW FLYER | NEW FLYER | 9999 |
SMB-125
ISSUE DATE: Jul 22 2013
S-1 GARD
PM – PREVENTIVE MAINTENANCE
13 – EXTERIOR PANELS & APPLIED PARTS
This bulletin provides additional information on preventive maintenance and servicing of the S-1 Gard used on your New Flyer vehicles.
This bulletin supersedes all prior information on this subject already provided in your New Flyer Service Manuals. Make this Service Bulletin available to service personnel to inform them of changed information.
SEOCONTENT-STARTSMB-125 Cover
SERVICE MANUAL BULLETIN
This Service Manual Bulletin is prepared by the Publications Department of New Flyer Industries
Canada ULC. Refer to details below.
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2013 New Flyer Industries Canada ULC
ISSUE DATE: Jul 22 2013
SMB-125
APPLICABILITY
VEHICLE LENGTH ???? 30ft. ???? 35ft. ???? 40ft. ???? 60ft. ???? ALL
VEHICLE TYPE ???? High Floor ???? Low Floor ???? Invero ???? Xcelsior ???? ALL
FUEL TYPE
???? Diesel ???? Electric ???? CNG ???? LNG
???? ALL
???? Diesel/Electric ???? Gas/Electric ???? Fuel Cell
SUBJECT S-1 GARD
SECTION TITLE PM – PREVENTIVE MAINTENANCE
13 – EXTERIOR PANELS & APPLIED PARTS
DETAILS This bulletin provides additional information on preventive maintenance
and servicing of the S-1 Gard used on your New Flyer vehicles.
This bulletin supersedes all prior information on this subject already
provided in your New Flyer Service Manuals. Make this Service Bulletin
available to service personnel to inform them of changed information.
SMB-125 1 of 3
SERVICE MANUAL BULLETIN
SMB-125
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2013 New Flyer Industries Canada ULC
1. S-1 GARD
1.1. Preventive Maintenance
1.1.1. Daily Preventive Maintenance
As part of the exterior vehicle inspection,
ensure the S-1 Gard is securely in place, is
installed level to the ground and is undamaged.
Make note of any damage, such as
twists or tears in the S-1Gard material.
1.1.2. 12,000 Miles (19,300 km) Preventive
Maintenance
Every 12,000 miles, inspect the Gard and
receiver as follows:
❒ Raise the vehicle. Refer to the General
Information Section of your New Flyer Service
Manual for procedure.
❒ Inspect S-1 Gard material for excessive
damage. Normal wear of the material does
not impair its functionality, however excessive
damage indicates that the minimal
ground clearance is not being maintained.
❒ Excessive wear of S-1 Gard material may
be an indication of suspension problems,
such as incorrect ride height adjustment,
shock absorber wear, or air spring leaks.
Correct suspension problems as required.
☞NOTE:
Before setting S-1 Gard clearances,
ensure vehicle air system is fully charged
and the ride height is correctly set according
to your New Flyer Service Manual.
❒ Replace or adjust S-1 Gards which are
worn or do not meet this specification.
Refer to “1.3. S-1 Gard Specifications for
clearance dimension “A”. See “Fig. 1:
Required S-1 Gard to Street Clearance.
The S-1 Gard entire lower edge must be
level with and not contact the ground in
order for it to function correctly.
1.2. Description
The S-1 Gards are protective molded
deflectors mounted in front of the rear and
center curbside wheels of the vehicle. The
S-1 Gards fit into a receiver channel and
are retained there with mounting bolts.
1.3. S-1 Gard Specifications
Material…………………..Molded Polyurethane
Inboard Distance
………….. approx. 0.5″ from first tire tread
New Flyer
Parts Manual
Part #
Min.
Dimension
“A” (in)**
Max.
Dimension
“A” (in)**
214667* 4.0 ± .06 6.11 ± .06
283378 4.0 ± .06 6.83 ± .06
344487 4.0 ± .06 6.83 ± .06
433237 4.0 ± .06 4.40 ± .06
481524 4.0 ± .06 4.30 ± .06
489308 4.0 ± .06 4.88 ± .06
511142 4.0 ± .06 4.87 ± .06
* Exception:
As a result of bus build specification differences,
the Dimension “A” clearance is 4.0 inches for
SR877 & SR905
** Dimension “A”:
Is the clearance required from the underside of
the S-1 Gard to the top of the street.
2 of 3 SMB-125
SERVICE MANUAL BULLETIN
SMB-125
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2013 New Flyer Industries Canada ULC
Fig. 1: Required S-1 Gard to Street Clearance
1.4. Operation
The S-1 Gard is designed as a contoured
deflector shield that reduces the space
between the bottom of the vehicle and the
curb or road surface in front of the curbside
wheels. Should an object fall in the proximity
of the rear (or center) curbside wheels,
the reduced gap created by the S-1 Gard
contour is designed to reduce the possibility
of the object being run over by the
wheels of the vehicle.
1.5. Maintenance
Refer to “1.1. Preventive Maintenance for
scheduled maintenance procedures and
intervals.
1.6. Removal
☞NOTE:
The S-1 Gard can be removed from the
vehicle while the receiver remains
attached for proper alignment. See “Fig. 2:
S-1 Gard Removal & Installation.
1. Raise the vehicle. Refer to the General
Information Section of your New Flyer Service
Manual for procedure.
2. Remove the two bolts and washers (Item
1) which secure the rear S-1 Gard to the
receiver channel.
3. Slide the S-1 Gard out of the receiver
channel.
4. On vehicles with a center axle, remove the
bolt and washer (Item 2) that secures the
S-1 Gard into the receiver and the two
bolts and washers (Item 3) which secure
the outer receiver bracket to the receiver
☞NOTE:
The nuts for the outer receiver bracket
mounting are welded to the receiver.
5. Slide the S-1 Gard out of the receiver
channel.
????????????????????
???????????????? ????????????
s132705a.svg
SMB-125 3 of 3
SERVICE MANUAL BULLETIN
SMB-125
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2013 New Flyer Industries Canada ULC
Fig. 2: S-1 Gard Removal & Installation
1.7. Installation
1. Slide the S-1 Gard into the receiver channel.
2. Apply Loctite-242 to one or two threads on
the mounting bolts
3. Secure the S-1 Gard to the channel at the
rear wheel with 1/2″ bolts and washers
(Item 1). The S-1 Gard is correctly positioned
when the outer edge is approximately
0.5″ inboard of the first tire tread.
4. Torque bolts to 87 ± 3 ft-lb. (117 ± 4 Nm)
5. On vehicles with a center axle, secure the
center S-1 Gard to the receiver channel
with one bolt (Item 2).
6. Torque to 87 ± 3 ft-lb. (117 ± 4 Nm).
7. Install the outer receiver bracket to the
receiver using the two bolts and washers
(Item 3).
8. Tighten bolts to standard torque specification.
Refer to your New Flyer Service Manual.
9. Lower vehicle to the ground.
☞NOTE:
Before setting S-1 Gard clearances,
ensure vehicle air system is fully charged
and the ride height is correctly set according
to your New Flyer Service Manual.
10.Measure ground clearance to match specified
dimensions. Refer to “1.3. S-1 Gard
Specifications for clearance dimension “A”.
See “Fig. 1: Required S-1 Gard to Street
Clearance.
11.The S-1 Gard entire lower edge must be
level with and not contact the ground in
order for it to function correctly.
????
????
????
s132702a.svg
SMB125
https://www.nhtsa.gov/recalls?nhtsaId=10110435
https://static.nhtsa.gov/odi/tsbs/2013/MC-10110435-9999.pdf
“This site contains affiliate links for which OEMDTC may be compensated” |
- Reduce car scratches: This bumper guard sticks to the front and rear bumpers of cars to reduce scratches and reduce paint damage caused by collisions. The car bumper protector can also be used to cover existing scratches, which is beautiful and unobtrusive.
- Widely applicable:This anti collision car corner bumper guard is universal for various models of Sedan, SUV, MPV, Pickup, Truck cars ,automotive, vehicle. Anti-scratch strips sticker tape can be stick on front,back,rear bumper and door edge,corner.
- Elegant and dynamic design: The design of this car bumper guard is elegant and dynamic, we have 4 colors for you to choose. After installing this anti scratch bumper protector, your car will have a more sporty appearance.
- High Quality Material: This car bumper guard strip is made of durable PVC rubber and double-sided 3M adhesive tape. Make the car bumper protector strip soft and elastic, can cushion part of the impact.
- Easy to Install: The anti collision car bumper guard strip Come with double-sided 3M adhesive tape, can stick on any place of your car like the front & rear bumper, door guard and corner, protect and decorate your car, make your car particular and unique.
- 🚘WARNING: Intended to be used on parked vehicles ONLY. Never drive with the BumperButler attached; using the BumperButler while driving may leave scratches on your car's exterior.
- 🚘Dimensions: 43 X 11 inches
- 🚘Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use. Loose dirt can be shaken out or vacuumed, and hard soiled areas can be hosed down with water and allowed to dry
- 🚘Patented, durable, and long-lasting rubber design; Fits most sedan vehicles. Strong security straps help deter theft and add extra sturdiness
- 🚘High-Intensity Safety Reflectors make the Bumper Butler stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations
- 【High Quality Material】: This rear bumper protector guard made of high quality rubber, which is very durable, flexible, resistant to heat and cold, besides, it is also anti-aging, waterproof & UV resistance.
- 【Universal Fit】: There are two sizes offer you to choose, Which are universal fit for most of cars. Please measure the size of the installation position before buying.
- 【Easy to Install】: Just using the glue tape, you can easily install the car rear bumper. Make sure there's no oil, water or dirty stain first, then clean the surface and stick glue tape on it, put and press rubber bumper guard protector on the car surface. It is very easy and convenient to use and remove.
- 【Multiple Use】: When loading and unloading luggages, tool box and more items in car trunk, it can effectively prevent scratches and damages, cover existing scratches and stains in the car surface, keep car looks new and clean.
- 【Friendly Service】: We're always committed to provide quality product and the best service to customers, if the products you receive have any quality problems, you can return or exchange them. Please feel free to let us know if you have any questions.
- Keep your car looking like new with our anti-collision patch bumper protectors. Designed to shield your car bumper edge from scratches and abrasion, our protectors are a must-have for any car owner who wants to maintain their vehicle's pristine appearance.
- Our sleek black bumper protectors have a universal fit that makes them compatible with most car models. They'll blend in perfectly with any car color and style.
- Installing our bumper protectors is a breeze, thanks to the adhesive backing that comes included. Plus, our protectors are incredibly durable and flexible, making them suitable for any shape of car bumper.
- Made from top-quality rubber materials, our bumper protectors don't just prevent scratches and wear and tear - they also cover up existing blemishes, protecting your car from unsightly paint scratches and other imperfections.
- When you receive the goods, if there are any problem, please contact us and do not directly open the dispute. We promise we will give you a satisfied solution after we confirmed it. We also will give you a positive evaluation.
- Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.Fit Type: Universal
- The extruded U-nuts can be used to replace/fix to the bumper
- The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine cover mud flap and splash guard shield retainers rivet clips replacement
- Fits Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details)
- Package includes 10pcs Extruded U-nuts - Replace/Fix to the Bumper(CORROSION RESISTANT) 15pcs Body Bolts with Built-in Fender Washer (CORROSION RESISTANT) 10pcs Plastic Push Clips as pictured
- ★ This Car Bumper Guard Strip can protects your car bumper edge from scratches and abrasion,beautiful and practical.
- ★ You will get 4 pcs black Anti-collision Patch Bumper Bumper Protectors, Universal fit for most of cars.
- ★ Before installation, clean the surface of the required installation position, then pull off the cover of the adhesive tape, fix the good on the place you selected. easy to install, durable, flexible, can be used for any shape.
- ★ High-quality rubber materials. Cover existing scratches and prevents your car from wear and tear, scratches paint scratches ,etc.
- ★ Elegant and dynamic design,match well with all kind of car. This goods can be installed in the front and rear of the car bumper. It process special coating, Protection for bumper corner, avoid scratch of the car.
- 3" THICK RUBBER: Constructed from high-quality rubber, this license plate bumper guard offers exceptional durability and strength, ensuring long-lasting protection for your vehicle's bumper.
- UNIVERSAL FIT: Designed to fit a wide range of cars, trucks, SUVs, and vans, this license plate guard is a versatile accessory that complements any vehicle's style.
- EASY INSTALLATION: With the included screws, installation is a breeze. Simply attach the guard to your license plate and secure it in place with the provided hardware.
- SCUFF RESISTANCE: The rubber material of this license plate bumper guard is highly resistant to scuffs and scratches, making it an ideal choice for protecting your bumper from everyday wear and tear.
- BUBBLE-FREE SEAL: The guard features a bubble-free seal that ensures a tight and secure fit, preventing any water or debris from getting inside.
- Quantity : Front door conner bumper protector guards X 2, Rear door conner bumper protector guards X 2
- Size : Front door guards(9.5cm x 2.3cm), Rear door guards(8.2cm x 2.0cm)
- Material : ABS
- .
- .
- 【Airbag Cushion】This unique furniture bumper has a built-in small airbag, which has a stronger anti-collision capability. Attached to car body, frigerator or cabinet door, it can effectively cushion shocks and protect walls, refrigerators and car doors from scratches and collisions.
- 【Good Self-Adhesive】Our silicone car door edge guards bumpers are made of upgraded 3M glue with excellent self-adhesion, firm and won't fall off. Sticks tightly and tear without leaving glue and not hurting the car paint.Can be used at anywhere you want, car door, door handle, rearview mirror, Fridge & Cabinet etc.
- 【Waterproof Design】360 waterproof you can rest assured to wash your car.
- 【No Yellowing & Deformation】It's made of excellent PVC material, which has strong flexibility, seamless fit, transparent and beautiful same color with the original car and is not easy to deform; Not afraid of sunlight, -20° ~ 70° No yellowing, no deformation.
- 【Package & Size】4 Pcs anti-collision strips (2pcs x short + 2pcs x long). Long: 5.79 x 0.67 x 0.24in; Short: 3.54 x 0.67 x 0.24in.
Last update on 2024-04-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.