“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10110455
Manufacturer Communication Number: SMB140
Summary
Service Manual Bulletin – Wheelchair Tie-Down & Occupant Restraints.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
NEW FLYER | NEW FLYER | 9999 |
SMB-140
ISSUE DATE: Nov 04 2014
Wheelchair Tie-Down & Occupant Restraints
PM – PREVENTIVE MAINTENANCE
This bulletin provides revised inspection intervals and procedures for the wheelchair tie-down belts and occupant restraints installed on your New Flyer vehicle.
This information supersedes any prior information on this subject already provided in your New Flyer Service Manuals. Make this Service Bulletin available to service personnel to inform them of changed information.
SEOCONTENT-START
SMB-140 1 of 2
SERVICE MANUAL BULLETIN
This Service Manual Bulletin is prepared by the Publications Department of New Flyer Industries
Canada ULC. Refer to details below.
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2014 New Flyer Industries Canada ULC
ISSUE DATE: Nov 04 2014
SMB-140
APPLICABILITY
VEHICLE LENGTH 30ft. 35ft. 40ft. 60ft. ALL
VEHICLE TYPE High Floor Low Floor Invero® Xcelsior® ALL
FUEL TYPE
Diesel Electric Diesel/Electric
ALL
CNG LNG
SUBJECT Wheelchair Tie-Down & Occupant Restraints
SECTION TITLE PM – PREVENTIVE MAINTENANCE
DETAILS This bulletin provides revised inspection intervals and procedures for
the wheelchair tie-down belts and occupant restraints installed on your
New Flyer vehicle.
This information supersedes any prior information on this subject
already provided in your New Flyer Service Manuals. Make this Service
Bulletin available to service personnel to inform them of changed information.
DRAFT
2 of 2 SMB-140
SERVICE MANUAL BULLETIN
SMB-140
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2014 New Flyer Industries Canada ULC
1. Daily Preventive
Maintenance
1.1. Wheelchair Tie-Down & Occupant
Restraints
If the vehicle was involved in an impact
situation, significant enough to have
the vehicle towed, then the wheelchair
tie-downs, occupant restraints, and
anchorages that were in use at the time
should be replaced.
The following items should be inspected on
a daily basis:
❒ Check belt retractor mechanism by extending
and releasing belt. Ensure belt retractor
operates as designed and functions
smoothly.
❒ Inspect belts to ensure webbing is not cut,
frayed, damaged, or contaminated by polishes,
oils, or chemicals.
❒ Operate buckles and any locking or
release mechanisms. Ensure mechanisms
operate smoothly and release completely.
❒ Ensure all floor anchors are secure and
free of obstructions, debris and dirt.
Tighten mounting hardware as required.
☞NOTE:
If any mounting hardware requires tightening
or adjustment, the fastener must be
removed to have the threads cleaned and
Loctite 243 reapplied.
❒ Ensure all wall anchors for belts are properly
secured and allow proper freedom of
movement.
❒ Ensure floor surface in wheelchair restraint
area is undamaged and free of any condition
which would impede use of equipment.
❒ Ensure the belts are kept clean and
recoiled within the retractor when not in
use.
❒ Ensure all labels detailing use of restraint
equipment are undamaged and clearly legible.
2. 6,000 Miles (9,600 km)
Preventive Maintenance
2.1. Wheelchair Tie-Down & Occupant
Restraints
Perform the following activities every 6,000
miles (9,600 km):
❒ Clean belts as required using mild soap
and water. Do not use solvents, chemical
solutions or strong detergents. If required,
soak belts for several hours in water to
loosen dirt. Clean, rinse and dry thoroughly
before returning to service.
❒ Lubricate the tiedown belt buckles at the
hinges being careful not to contaminate
the webbing.
DRAFT
SMB140
https://www.nhtsa.gov/recalls?nhtsaId=10110455
https://static.nhtsa.gov/odi/tsbs/2014/MC-10110455-9999.pdf
- Single Tensioning Knob - Safely secures wheelchair and occupant in under 10 seconds
- Positive Lock Indicator (PLI) - Patented feature clearly indicates when fitting is locked in anchorage (L-track application only)
- Interchangeable - Eliminates confusion; no right, left, front or rear locations
- Universal Design - Accommodates virtually all wheelchair designs, including scooters
- Qty 4 Kit includes for L-Track
- User Manual for Wheelchair & Occupant Restraint System is Included
- L-Track Floor Mount
- Retractable Tie Down Straps
- Meets the Requirements of SAE J2249 Including a Frontal Impact Test Conducted at 30 mph, 20G using a Forward-Facing Surrogate Wheelchair with a Mass of 85kg and an ATD with a Mass of 76.3 kg.
- For Use with L-Track Only!
- Knob-less, One-Handed Operation - No knobs to interfere with.
- Automatic, Self-Locking & Self-Tensioning - No manual tensioning required
- Universal Design - Accommodates virtually all wheelchair designs, including scooters
- Interchangeable - Eliminates confusion; no right, left, front or rear locations
- Qty 1 QRT Standard Retractor w/ PLI | Q8-6201-L
- This is a 1 retractor & belt replacement for a 4-pack kit
- (PLI) POSITIVE LOCK INDICATOR - Patented feature clearly indicates when fitting is locked in anchorage (L-track application only)
- SINGLE TENSIONING KNOB - Safely secures wheelchair and occupant in under 10 seconds.
- INTERCHANGEABLE - Eliminates confusion; no right, left, front or rear locations
- Automotive tie-down restraint system for securing wheelchairs to an existing L-Track, A-Track, or fl
- Designed for transit & Para-transit buses, crash tested at 30 mph (50 km/h)
- Manual tension cam buckle straps with J-Hook ends to easily attach to mobility aid frames
- Does not include floor pocket mounts or belts
- Meets or exceeds all SAEJ2249, ISO 10542, FMVSS 209,210,302,222, cmVSS 209, CSA Z605, AS2596 and ADA
- Dual Tightening Knobs - Provides additional tensioning if needed, Automatic, Self-Locking - Allows easy, one-handed hook-up of wheelchairs.
- Self-Tensioning - No manual tensioning required. Retractors automatically take up ‘slack’ to ensure wheelchair passenger is always secured.
- Fully ADA Compliant Crash Tested - 30mph / 20G crash tested 3 year limited warranty
- Accommodates Larger Wheelchairs - Reduced overall retractor length leaves more room for wheelchairs. Universal Design - Accommodates virtually all wheelchair designs, including scooters. Ultra-Durable - Constructed from hardened steel and coated in zinc for maximum corrosion resistance. J-Hook - Reduces twisting of belts and ensures proper securement with a quarter turn accommodating virtually all wheelchair designs.
- SINGLE TENSIONING KNOB - Safely secures wheelchair and occupant in under 10 seconds.
- (PLI) POSITIVE LOCK INDICATOR - Patented feature clearly indicates when fitting is locked in anchorage (L-track application only).
- INTERCHANGEABLE - Eliminates confusion; no right, left, front or rear locations.
- UNIVERSAL DESIGN - Accommodates virtually all wheelchair designs, including scooters.
- ULTRA-DURABLE - Constructed from hardened steel and coated in zinc for maximum corrosion resistance.
- Wheelchair tie down retractor kit for L-Track floor anchorage,keeps wheelchairs locked in place
- Included 4 pcs retractors with hook and 4 points track fitting and 1 pcs lap belt
- Attach and unattach easily,be used to secure an electric wheelchair or power wheelchair and get it nice and tight for transport
- Designed for transit & Paratransit bus,makes your life a lot easier
- Push-button lap belt with adjustable buckle for wheelchair restraint system,with a 25mm male plug to connect a 25mm socket on your shoulder belt.
- 48mm width high strength polyester webbing
- 3 meters over length for mutiple use,not for safety belt usage.
- Easily opperation
- Retractor is sold individually,shoulder belt excluded,Both the triangle fittings of ending attaches directly to stud on your retractor,check your retractor before your purchase.
Last update on 2024-03-21 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.