SRAN 579 – Brake Pads May Corrode/Detach From Backing Plate – 2018-2020 Triumph Motorcycles

“This site contains affiliate links for which OEMDTC may be compensated”

April 28, 2020 NHTSA CAMPAIGN NUMBER: 20V236000

Brake Pads May Corrode/Detach From Backing Plate

If the brake pad friction material detaches from the backing plate, it may lengthen the distance needed to stop the motorcycle, increasing the risk of a crash.

 

NHTSA Campaign Number: 20V236

Manufacturer Triumph Motorcycles America, LTD

Components SERVICE BRAKES, HYDRAULIC

Potential Number of Units Affected 3,691

 

Summary

Triumph Motorcycles America, LTD (Triumph) is recalling certain 2018-2020 Street Triple RS, Tiger 1200 XCx and Tiger 1200 XCA, 2019-2020 Speed Triple S and Speed Triple RS, 2018-2019 Tiger 1200 XRT, Tiger 1200 XR, Tiger 1200 XRx and Tiger 1200 XRx LRH and 2020 Tiger 1200 Alpine Edition and Tiger 1200 Desert Edition motorcycles. The front brake pads may corrode, potentially causing the front brake pad friction material to detach from the backing plate.

 

Remedy

Triumph will notify owners, and dealers will replace the front brake pads, free of charge. The recall began June 26, 2020. Owners may contact Triumph customer service at 1-678-854-2010. Triumph’s number for this recall is SRAN 579.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check for Triumph Recalls

 


Safety Recall Action Notice 579

Issue 4 – 07.2020

Subject: Front Brake Pads
Bulletin Number Models Affected VIN Range Markets Affected
579 Tiger 1200 XR From VIN 800262 to VIN AC0327 All Markets Except China
Tiger 1200 XRx
Tiger 1200 XCx
Tiger 1200 XRT
Tiger 1200 XCA
Tiger 1200 XRx (Low Ride Height)
Tiger 1200 – Alpine
Tiger 1200 – Desert
Street Triple RS From VIN 800262 to VIN AC0327

Plus Japan Markets Only – See Appendix B

Speed Triple RS From VIN 800262 to VIN AC5827
Speed Triple S

 

Background Information

Triumph’s brake supplier (Brembo) has requested that Triumph replace the brake pads on the above listed models.

Dealers are requested to remove the front brake pads and fit new brake pads as described in the procedure below.

 

Notice

STOP DELIVERY OF AFFECTED MOTORCYCLES IMMEDIATELY.

DO NOT deliver a motorcycle affected by this Safety Recall Action Notice to a customer until you have completed, or confirmed completion of, the procedures described in this Safety Recall Action Notice.

Delivering a motorcycle subject to an outstanding Safety Recall Action Notice may contravene local or national laws in your market, territory or country.

 

Triumph subsidiaries and distributors must instigate a Safety Recall Action in their country in accordance with the national recall code of practice. For vehicles in distributor or dealer stock the safety recall MUST be actioned before delivery to the customer.

 

Identification of Affected Motorcycles

Tiger 1200 XR, Tiger 1200 XRT, Tiger 1200 XRx, Tiger 1200 XRx (Low Ride Height), Tiger 1200 XCA, Tiger 1200 XCx, Tiger 1200 – Alpine, Tiger 1200 – Desert, Street Triple RS, Speed Triple S and Speed Triple RS models in the VIN ranges described above fitted with brake pads under Triumph part numbers T2021541 and T2022475 (and Brembo ID numbers 07.B809.23 and 07.9882.36 – see below).

 

Note:

 

Warranty Claim Instructions

Bulletin Number Fault Code Repair Code Description Repair Time Allowance
579 020203979 995791 Remove and Fit New Front Brake Pads 0.50 hours
995792 Inspection of Front Brake Pads 0.15 hours

 

Genuine Parts Information

Bulletin Number Model Part Number Description
All Tiger 1200 models listed above T2029091 Brake Pad, Set 2
Street Triple RS, Speed Triple RS and Speed Triple S T2029092 Brake Pad, Set 2

 

Parts Ordering Instructions

For Triumph Subsidiary and Overseas Distributor dealers using Triumph Warranty On-Line with Parts Auto Ordering Flag switched on: Order all repair parts by submitting a New Prior through the Warranty OnLine system. Entering the above repair code in a New Prior will automatically add the parts required and labour times for this Safety Recall Action Notice.

For Overseas Distributor dealers NOT using Triumph Warranty On-Line or for Overseas Distributor dealers using Triumph Warranty On-Line with Parts Auto Ordering Flag switched off: Orders should be placed using the normal parts ordering procedure.

 

Genuine Parts Return

Dealer to retain parts for 90 days. All parts must be stored in a secure, non-public accessed area and correctly identified with a completed warranty label. Thereafter the parts must be rendered unusable prior to scrapping.

 

Other Instructions

Once completed, please mark the Service Record Book that the requirements of this bulletin have been complied with.

Before returning the motorcycle to the customer, download the latest calibration using the current version of the Triumph diagnostic software to the following:

  • Engine electronic control module
  • Chassis electronic control module (if fitted)
  • Keyless electronic control module (if fitted)
  • Suspension electronic control module (if fitted)
  • Connectivity module (if fitted)
  • Instruments (if applicable).

 

Unused New Brake Pads (T2021541 and T2022475) in Dealer Stock.

Unused New Pad Sets in Dealer Stock: You are required to immediately quarantine all stocks of unused new affected brake pads. Do not sell to the public or any third party. Please complete the form attached (Appendix A) and email back to Triumph. See separate Triumphonline Notice for details of return email details.

Dealers holding zero stocks of affected parts are required to confirm nil stock to Triumph by returning the attached form.

Return all unused new brake pad stock to Triumph under the existing MRN (Materials Return Note) process.

 

Unused New Caliper Assemblies (T2022460, T2022470, T2023530, T2023540, T2021558, T2021559) in Dealer Stock.

Unused New Caliper Assemblies: You are required to immediately quarantine all stocks of affected calipers. Do not sell to the public or any third party. Please complete the form attached (Appendix A) and email back to Triumph. Further instructions will then follow.

Dealers holding zero stocks of affected parts are required to confirm nil stock to Triumph by returning the attached form.

 

Identification of Old Defective and New Remedy Parts

Calipers

Models Old (defective) Triumph Brake Caliper Part Numbers New (remedy) Triumph Brake Caliper Part Numbers
Tiger 1200 models listed above T2022460

T2022470

T2022970

T2022980

Speed Triple RS and Speed Triple S T2023530

T2023540

T2023550

T2023560

Street Triple RS T2021558

T2021559

T2023260

T2023270

 

Triumph Brake Pad Part Numbers

Models Old (defective) Triumph Brake Pad Part Numbers New (remedy) Triumph Brake Pad Part Numbers
Tiger 1200 models listed above T2022475 T2029091
Speed Triple RS and Speed Triple S T2021541 T2029092
Street Triple RS T2021541 T2029092

 

Brembo Brake Pad Part Numbers

Models Old (defective) Brembo Brake Pad Part Numbers New (remedy) Brembo Brake Pad Part Numbers
Tiger 1200 models listed above 07.B809.23 07.B809.27
Speed Triple RS and Speed Triple S 07.9882.36 07.9882.39
Street Triple RS 07.9882.36 07.9882.39

 

1. Tiger 1200 new remedy brake pad
2. Speed Triple and Street Triple new remedy brake pad
3. Brembo part numbers

Remedy brake pads include a red paint identifying mark as shown in the following illustration.

 

1.Red paint identifying mark

 

Triumph’s Stocks of New Remedy Brake Pads

Triumph’s stocks of new remedy brake pads are limited. Therefore available brake pads will be prioritised for warranty purposes commencing with customer motorcycles. Do not submit warranty claims for unsold new motorcycle stock until notified.

 

Front Brake Pads Replacement

 

Warning

Make sure the motorcycle is stabilised and adequately supported.

A correctly supported motorcycle will help prevent it from falling.

An unstable motorcycle may fall, causing injury to the operator or damage to the motorcycle.

 

  1. Remove the front brake pads as described in the relevant Service Manual.
  2. Check that the pads are genuine Triumph-Brembo brake pads (refer to Identification of Old Defective and New Remedy Parts above).
  3. If not genuine Triumph-Brembo brake pads return to caliper and complete a “Check Only” warranty claim (using Repair Code as described above). Explain to customer that the campaign only relates to genuine Triumph-Brembo brake pads.
  4. If genuine Triumph-Brembo brake pads, fit the new brake pads as described in the relevant service manual.

 

Appendix A

Triumph Safety Recall Action Number: 579

Dealer Declaration: Unused New Parts Stock

Dealer Name:
Dealer No:
Market:
Date below details submitted to Triumph:
Brake Pad Sets Number of new unused listed part numbers in our stock
T2021541
T2022475
Caliper Assemblies Number of new unused listed part numbers in our stock
T2022460
T2022470
T2023530
T2023540
T2021558
T2021559

 

Once completed, please email to Triumph – refer to TOL notice for email address.

 

Appendix B

Triumph Safety Recall Action Number: 579

Japan Market Only

VIN Number
AC0351 AC0463 AC0534 AC0599 AC0711 AC0896 AC1186 AC1235
AC0357 AC0471 AC0543 AC0606 AC0724 AC0902 AC1206 AC1237
AC0365 AC0482 AC0548 AC0609 AC0737 AC0913 AC1213 AC1238
AC0375 AC0486 AC0557 AC0618 AC0744 AC0955 AC1220 AC1244
AC0384 AC0491 AC0560 AC0625 AC0755 AC0960 AC1222 AC1247
AC0405 AC0502 AC0569 AC0634 AC0761 AC0963 AC1227 AC1255
AC0417 AC0515 AC0578 AC0646 AC0778 AC1039 AC1229 AC1259
AC0428 AC0518 AC0583 AC0679 AC0797 AC1065 AC1231 AC1265
AC0446 AC0527 AC0592 AC0695 AC0870 AC1123 AC1232

 


! IMPORTANT SAFETY RECALL !

REPLACE FRONT BRAKE PADS

Safety Recall: SRAN579
NHTSA Recall: 20V236

 

This notice applies to your motorcycle:

Model: Tiger 1200 2018 – 2020, Tiger 1200 Alpine + Desert Edition 2020, Street Triple RS 2017 – 2020, Street Triple R 2020 and  Speed Triple S and Speed Triple RS 2018 – 2020.
VIN: SMTXXXX

 

Dear [NAME]:

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

Triumph Motorcycles Ltd. has decided that a defect which relates to motor vehicle safety exists in your motorcycle, with the VIN shown above.  Triumph is conducting a safety recall to address the condition.

The reason for this recall notice: On your motorcycle your front brake pads could have potential issues involving detachment of brake pad friction material from the back plate; as a consequence the vehicle front brake performance could be compromised, increasing the risk of a crash.
What Triumph

Motorcycles Ltd & your dealer will do:

Triumph Motorcycles Ltd has authorized your dealer to replace your front brake pads free of charge to you including parts and labor. This repair should take around 30 minutes. However, depending upon the dealer’s work schedule, it may be necessary to make your motorcycle available for a longer period of time.
What you must do to ensure your safety: Please make an appointment with your authorized Triumph motorcycles dealer to have this important remedy performed on your motorcycle as soon as possible.

Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within 10 days.

If you need help: Please contact your authorized Triumph dealer should you have any questions or encounter any difficulty regarding this recall. In the event your dealer is unable to remedy your motorcycle, please contact Triumph Motorcycles America at 1-678-854-2010.

If you previously paid to have this recall performed on your motorcycle, you may be eligible for reimbursement.  Please contact Triumph Motorcycles at 1-888-284-6288 for more information, including eligibility requirements.

If an authorized Triumph dealer or Triumph Motorcycle America Ltd, fails or is unable to perform this remedy without charge within a reasonable amount of time, you may contact the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.

 

If you no longer own the motorcycle listed above, please contact Triumph at 1-678-854-2010 and provide any information you can furnish that will assist us in locating the new owner.

We apologise for any inconvenience this may cause you.  However, we have taken this course of action in the best interest of your safety and your continued satisfaction with your Triumph motorcycle. We appreciate your attention and cooperation in this important matter.

 

Sincerely, 

Triumph Motorcycles America Ltd.

 


7/7/2020

SAFETY RECALL ACTION NOTICE 579: FRONT BRAKE PADS

TOL NOTICE (US&CA) – July 6, 2020

TOL Ref. # 15255-SVC

SAFETY RECALL ACTION NOTICE 579: FRONT BRAKE PADS

Following a notification from our brake supplier, Triumph Motorcycles has initiated a voluntary safety recall affecting a specific VIN range of the following models. We require your immediate attention to rectify the below machines.

 

 

SAFETY RECALL ACTION NOTICE 579

 

Replace front brake pads.

 

Model Code Model Description
VG3 Tiger 1200XR
VM3 Tiger 1200XRx
VN3 Tiger 1200XCx
VR3 Tiger 1200XRT
VS3 Tiger 1200XCA
VT3 Tiger 1200XRx LRH
VV3 Tiger 1200 Alpine Edition
VW3 Tiger 1200 Dessert Edition
HD6 Street Triple RS
HJ7 Street Triple RS
NN5 Speed Triple S
NN6 Speed Triple RS

 

VIN RANGE: Start of Production to TBC (ALL MARKETS except China)

 

 

WHAT IS THE PROBLEM?

The front brake pads could have potential issues involving detachment of brake pad friction material from the backing plate, especially but not exclusively when used in a corrosive environment. As a consequence, the vehicle front brake performance could be compromised.

In case of detachment of the front brake pads friction material from the backing plate, the distance between the braking plate and disc cannot be balanced with a single action on the brake master cylinder. As a consequence, potentially defective pads can lead to an inadequate deceleration of the vehicle. Systems assembled with unaffected brake pads maintain their required performance. However, there may be an increased risk of rider injury and/or vehicle damage even if only one brake has an affected brake pad.

 

WHAT WILL TRIUMPH DO?

To address this condition, Triumph is launching a new recall as described in Safety Recall Action Notice 579.

All arrangements for updating of our computer systems have been completed.

Notification letters to current customers were mailed on the 26th June explaining the action and advising them to return their bike to a Triumph dealer to have the modification carried out free of charge to the owner. Customers will be advised to adhere to national Covid-19 general movement and social distancing rules.

 

WHAT SHOULD YOU DO?

All affected motorcycles are to be repaired in accordance with Safety Recall Action Notice 579.

 

It is imperative that any owner who has purchased an affected machine be contacted by you immediately and asked to return the machine for modification.

 

Triumph Dealers should take the following actions:

  1. Quarantine all unsold motorcycle stock (including motorcycle stock for sale on your website and with 3rd parties) and await details to permit modification arrangements as per Safety Recall Action Notice 579 prior to any further deliveries to customers.
  2. Owners of machines outside of the affected VIN range are not connected with this action and may therefore require reassurance.
  3. Some VINs affected by this Safety Recall Action Notice may also require other bulletin or Safety Recall Action Notice work to be carried out. Please use Triumphonline to identify all outstanding bulletins or notices and make arrangements to carry out these repairs at the same time.
  4. This action is likely to increase visitor tra c to your showroom and service areas. Please ensure all arrangements are made to best accommodate them.
  5. Quarantine all unsold new stocks of a ected pad sets (and unsold new caliper assemblies). Do not sell to customers. Complete the attached Declaration Form and email back to the address at the bottom of the form and await further instructions.
  6. Affected Pad Set and Caliper Assembly part numbers:
Models Old Triumph Caliper Part Nos Old Triumph Pad Part Nos
Tiger 1200 family T2022460

T2022470

T2022475
Speed Triple family T2023530

T2023540

T2021541
Street Triple RS T2021558

T2021559

T2021541

 

IDENTIFICATION OF NEW BRAKE PADS

The new (remedy) brake pads have a red paint mark on the backing plate and the Brembo identification numbers found on the reverse of the pad backing plate have change.  Please refer to below table and images for clarification.

Old Brembo Product ID No New (Remedy) Brembo Product ID No
07.B809.23 07.B809.27
07.9882.36 07.9882.39

 

U.S. LAW PROHIBITS THE DELIVERY OF A RECALLED MOTORCYCLE UNDER A SALE OR LEASE UNTIL THE REMEDY HAS BEEN PERFORMED.

 

We apologize for the inconvenience this may cause, but we are taking this action in the interest of our customers’ personal safety and satisfaction with our products. We thank you in advance for your anticipated cooperation.

 

If you have any additional questions, please contact Triumph Customer Support at (888) 284-6288.

 


TOL NOTICE (US&CA) – July 30, 2020                        

TOL Ref. # 15463-SVC

ADDITIONAL VINS AFFECTED BY RECALL ACTION 579

 

This notice is a follow-up on the initial attached campaign announcement notice. Triumph has increased the VIN range of affected motorcycles for this campaign.

 

Issue 4 of Safety Recall Action Notice (SRAN) 579 has been saved in the Triumph Online Service Bulletin library. Issue 4 is currently in English only.

 

Issue 4 includes an extended VIN range relating to Speed Triple S and Speed Triple RS models. The new VIN range for these Speed Triple models is From VIN 800262 to VIN AC5827.

 

Translated copies of Issue 4 will be posted to the Service Bulletin library in approximately ten working days’ time and will replace the current Issue 3 documents.

 

Triumph will be writing to the additionally affected customers in the next few days for any retailed VINs.

 

U.S. LAW PROHIBITS THE DELIVERY OF A RECALLED MOTORCYCLE UNDER A SALE OR LEASE UNTIL THE REMEDY HAS BEEN PERFORMED.

 

Finally, please note that if you wish to order replacement brake pads for normal service use, then please do so. Normal stock orders will be accepted and processed by Triumph.

 

If you have any additional questions, please contact Triumph Customer Support at (888) 2846288.

 


TOL NOTICE (US&CA) – September 18, 2020

TOL

Ref. # 15899-SVC

 

SB579 – BREMBO UNSOLD INVENTORY REMINDER

 

Per Service Bulletin 579, all dealers must return all unused new stock of impacted brake pads and caliper assemblies as detailed below.

 

Unused New Brake Pads (T2021541 and T2022475) in Dealer Stock.

You are required to immediately quarantine all stocks of unused new a ected brake pads. Do not sell to the public or any third party.

 

Return all unused new brake pad stock to Triumph under the existing MRN (Materials Return Note) process.

 

Dealers holding zero stocks of affected parts are required to confirm nil stock to Triumph by returning the attached form.

 

Please complete Appendix A of Service Bulletin 579 and email it to Triumph at TMA.Aftersales@triumphmotorcycles,com.

Dealers are to return their completed Appendix A within 48 hours of receipt of this notice.

 

Unused New Caliper Assemblies (T2022460, T2022470, T2023530, T2023540, T2021558, T2021559) in Dealer Stock.

You are required to immediately quarantine all stocks of affected calipers. Do not sell to the public or any third party.

 

Remove all brake pads from affected calipers and return pads to Triumph under the existing MRN (Materials Return Note) process. Then rework calipers with new stock pads.

 

New Caliper Pad Part Number:

       V*3 = 2029091

       NN5/NN6 = 2020902

       HD6/HD7 = 2029092

 

Dealers holding zero stocks of a ected parts are required to confirm nil stock to Triumph by returning the attached form. Please complete  Appendix A of SB579 and email to Triumph at TMA.Aftersales@triumphmotorcycles,com.

 

If you have any additional questions, please contact Triumph Customer Support at (888) 2846288.

 


Dear Triumph Motorcycle Owner,

VIN number: 739332

Our records indicate that your Triumph motorcycle may have an outstanding safety recall.

For specific details on your outstanding recall, please visit https://www.triumphmotorcycles.com/owners/recalls and enter your full VIN number.

Recall repairs will be carried out free of charge (including parts and labor) by an authorized Triumph Dealer. To find your nearest dealer, please visit

https://www.triumphmotorcycles.com/dealers/find-a-dealer. If you no longer own the motorcycle listed above, please contact Triumph at 1-678-854-2010 or

TMA.Aftersales@TriumphMotorcycles.com and provide any information you can furnish that will assist us in locating the new owner.

We apologise for any inconvenience this may cause you. However, we have taken this course of action in the best interest of your safety and your continued satisfaction with your Triumph

motorcycle. We appreciate your attention and cooperation in this important matter.

Sincerely,

Triumph Motorcycles Ltd.

 


23 Affected Products

Vehicles

MAKE MODEL YEAR
TRIUMPH SPEED TRIPLE RS 2018-2019
TRIUMPH SPEED TRIPLE S 2019-2020
TRIUMPH STREET TRIPLE RS 2018-2020
TRIUMPH TIGER 1200 ALPINE 2020
TRIUMPH TIGER 1200 DESERT 2020
TRIUMPH TIGER 1200 XCA 2018-2020
TRIUMPH TIGER 1200 XCX 2018-2020
TRIUMPH TIGER 1200 XR 2018-2019
TRIUMPH TIGER 1200 XRT 2018-2019
TRIUMPH TIGER 1200 XRX 2018-2019
TRIUMPH XRX (LRH) 2018-2019

 


17 Associated Documents

Recall 573 Report – Amendment 1

RCLRPT-20V236-3767.PDF 219.554KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [214.41 KB]

 


Safety Bulletin

RCSB-20V236-0219.pdf 100.26KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [97.91 KB]

 


Recall Quarterly Report #1, 2020-2

RCLQRT-20V236-1473.PDF 211.152KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.20 KB]

 


Recall Acknowledgement

RCAK-20V236-2172.pdf 244.701KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [238.97 KB]

 


Defect Notice 573 Report

RCLRPT-20V236-3086.PDF 219.557KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [214.41 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-20V236-8605.pdf 259.054KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [252.98 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-20V236-2577.pdf 103.933KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [101.50 KB]

 


Remedy Instructions and TSB

RCRIT-20V236-1994.pdf 102.137KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [99.74 KB]

 


Manufacturer Notices(to Dealers,etc) – TOL NOTICE (US&CA) – November 30, 2020 TOL Ref. # 16661-SVC SAFETY RECALL ACTION NOTICE 579: INFORMATION ON REWORKED BRAKE PADS

RCMN-20V236-4364.pdf 330.369KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [322.63 KB]

 


Manufacturer Notices(to Dealers,etc) – July 30, 2020 Subject: Service/Technical

RCMN-20V236-7794.pdf 125.463KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [122.52 KB]

 


Recall Quarterly Report #3, 2020-4

RCLQRT-20V236-5165.PDF 211.348KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.39 KB]

 


Email Campaign

RMISC-20V236-8046.pdf 195.597KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [191.01 KB]

 


Recall Quarterly Report #2, 2020-3

RCLQRT-20V236-4237.PDF 211.256KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.30 KB]

 


Remedy Instructions and TSB

RCRIT-20V236-7959.pdf 108.317KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [105.78 KB]

 


Manufacturer Notices(to Dealers,etc) – TOL NOTICE (US&CA) – September 18, 2020 TOLRef. # 15899-SVC SB579 – BREMBO UNSOLD INVENTORY REMINDER

RCMN-20V236-7743.pdf 173.144KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [169.09 KB]

 


Manufacturer Notices(to Dealers,etc) – 20200812_US_Terminated Dealer notification

RCMN-20V236-9553.pdf 2569.127KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.45 MB]

 


Manufacturer Notices(to Dealers,etc) – 7/22/2020 INVENTORY INSTRUCTION FOR SB 579 BREMBO BRAKES

RCMN-20V236-8671.pdf 168.154KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [164.21 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V236&docType=RCL

 


 

SaleBestseller No. 1
EBC Brakes FA209/2HH Disc Brake Pad Set
  • Made using high pressure die cast alluminium platforms with bonded brake linings
  • All shoes are radius ground and edge trimmed
  • Features lead in and lead out chamfers at lining ends
  • Original equipment style brake shoe springs included
SaleBestseller No. 2
EBC Brakes FA196HH Disc Brake Pad Set
  • Made using high pressure die cast alluminium platforms with bonded brake linings
  • All shoes are radius ground and edge trimmed
  • Features lead in and lead out chamfers at lining ends
  • Original equipment style brake shoe springs included
Bestseller No. 3
EBC Brakes EBPCK1027 Complete Double-H Sintered Brake Pad Change Kit
  • Fits: Harley Davidson FLHX Street Glide 2008-2013, FLHX Street Glide 2014-2015, FLHXS Street Glide Special 2015
  • Complete Double-H Sintered Brake Pad Change Kit includes 2 EBC FA409HH Front Brake Pads and 1 EBC FA409HH Rear Brake Pad
  • Double-H Sintered Brake Pads deliver high performance and are well known as the EBC flagship sintered high-performance brake pad
  • ECE R 90 brake safety approved and TUV tested, these ultra high friction HH rated brake pads remain a market leader above the rest as nothing else beats the performance of the Double-H Sintered Brake Pad
  • Manufactured in the US in the state-of-the-art sintering plant in Ohio, Double-H Sintered Brake Pads perform well in all weather conditions be it dry or wet and have a high longevity lasting for many miles
Bestseller No. 4
EBC Brakes FA630HH Double-H Series Sintered Disc Brake Pad
  • Features the highest friction HH rating for maximum stopping power, made in the USA from sintered copper alloy like original pads for longer life and perfect braking
  • Stainless steel radiator plates are fitted to reduce heat transfer into bikes hydraulics where required
  • The unique double segment vented design improves braking under all riding conditions, keeping the pads cooler and preventing pad drag and overheat or fade
  • EBC removed the iron powders commonly used in many sintered pads that cause the pad to weld to the disc under corrosion when the bike is parked and replaced it with stainless powder
  • Uses EBCs SB101C friction material which completely eliminates brake noise, improves the pads heat cycling capability and improves feel at the lever
Bestseller No. 5
Front Rear Brake Pads Sintered for Harley Davidson Road Glide Road King Street Glide Electra Glide Ultra Limited Night Rod Street Rod V-Rod Tri Glide
  • 【Fitment】Fit for Harley Davidson Motorcycle ▶ Electra Glide FLHT 2008-2020 ▶ Night Rod VRSCD 2006-2011 ▶ Road Glide FLTR 2008-2020 ▶ Road King FLHR 2008-2020
  • 【Fitment】 ▶ Street Glide FLHX 2008-2020 ▶ Street Rod VRSCR 2006-2007 ▶ Tri Glide FLHTCUTG 2008-2013 2019-2020 ▶ Ultra Limited FLHTK 2014-2020 ▶ V-Rod VRSC 2005-2017
  • 【Material】1. With copper plating base is good for dissipation 2.Sintered by copper and tin formula compound is designed to any poor condictions.
  • 【OEM#】41854-08 42850-06 42897-06 42897-08 FA409. 【Repalcement OEM#】42850-06A 42897-06A
  • 【Package】Brake Pads Set x 3. Not included instruction manual. Easy to install
Bestseller No. 6
ECCPP Brake Pads for FLHTCU Ultra Classic Electra Glide 2008-2022, FLHR Road King FLHX Street Glide 2008-2022, Front and Rear Braking Pads Kits Set
  • Premium Brake Pads for Your Motorcycle or ATV: Brake Pads fit for 2008-2022 FLHR Road King FLHX Street Glide + 2008-2020 FLHTCU Ultra Classic Electra Glide & FLHRC Road King Classic & VRSCDX Night Rod, 2015-2022 Road Glide FLTRX Limited & FLHXS Street Glide Special & FLTRXS Road Glide Special + 2015-2021 FLHTK Electra Glide Ultra LTD & FLHTKL Electra Glide Ultra LTD Low, 2016-2020 FLTRU Road Glide Ultra + 2007-2020 VRSCDX Night Rod Special + 2009-2020 VRSCF V-Rod Muscle
  • High-Performance Braking: Our brake pads are made from the highest quality Carbon Fiber materials and are designed to provide superior stopping power, ensuring that you can stop your motorcycle or ATV safely and quickly when you need to.
  • Quiet and Durable: ECCPP brake pads are designed to be quiet and long-lasting, so you can enjoy a smooth and noise-free ride while also getting the most out of your investment.
  • Easy to Install: Installing our brake pads is a breeze, and can be done by anyone without the need for any special tools. We've designed our brake pads to fit perfectly onto your motorcycle or ATV, so you can get back on the road in no time.
  • Satisfaction Guaranteed: We're confident that you'll love ECCPP brake pads, and we stand behind them with our satisfaction guarantee. If for any reason you're not completely satisfied, we offer a hassle-free return policy.
SaleBestseller No. 7
EBC Brakes FA174HH Disc Brake Pad Set, Black
  • All shoes are radius ground and edge trimmed
  • Package Dimensions: 15.748 H x 1.016 L x 12.192 W (centimetres)
  • Package Weight: 0.227 kilograms
  • Country of Origin : Wales
  • Made using high pressure die cast alluminium platforms with bonded brake linings
SaleBestseller No. 8
EBC Brakes FA409HH Disc Brake Pad Set
  • Made using high pressure die cast alluminium platforms with bonded brake linings
  • All shoes are radius ground and edge trimmed
  • Features lead in and lead out chamfers at lining ends
  • Original equipment style brake shoe springs included
Bestseller No. 9
ECCPP Brake Pads Fit for SUZUKI GSXR 600 GSXR600 GSXR 750 GSXR750 2006-2010, V-Strom DL1000 ABS 2014-2020, GSXR1000 GSXR 1000 K7/K8 2007-2010, GSX1300 GSX1300R 2008-2012, FA379 FA254 Front and Rear
  • Premium Brake Pads for Your Motorcycle or ATV: Brake Pads fit for SUZUKI GSXR600 GSXR750 GSXR 600 GSXR 750 K6/K7/K8/K9/L0 2006 2007 2008 2009 2010; GSXR1000 K7/K8 2007 2008 2009 2010; GSX1300 RK8/RK9/RL0/RL1/RL2 2008 2009 2010 2011 2012 Fitment: for SUZUKI DL1000 AL4/AL5/AL6/AL7/AL8/AL9 V-Strom(ABS) 2014 2015 2016 2017 2018 2019 2020; DL1000XT XAL8/XAL9 V-Strom(ABS) 2018 2019 2020
  • High-Performance Braking: Our brake pads or brake shoes are made from the highest quality Carbon Fiber materials and are designed to provide superior stopping power, ensuring that you can stop your motorcycle or ATV safely and quickly when you need to.
  • Quiet and Durable: ECCPP brake pads are designed to be quiet and long-lasting, so you can enjoy a smooth and noise-free ride while also getting the most out of your investment.
  • Easy to Install: Installing our brake pads is a breeze, and can be done by anyone without the need for any special tools. We've designed our brake pads to fit perfectly onto your motorcycle or ATV, so you can get back on the road in no time.
  • Satisfaction Guaranteed: We're confident that you'll love ECCPP brake pads, and we stand behind them with our satisfaction guarantee. If for any reason you're not completely satisfied, we offer a hassle-free return policy.
Bestseller No. 10
EBC Brakes FA231 Disc Brake Pad Set
  • Made using high pressure die cast alluminium platforms with bonded brake linings
  • All shoes are radius ground and edge trimmed
  • Features lead in and lead out chamfers at lining ends
  • Original equipment style brake shoe springs included

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...