“This site contains affiliate links for which OEMDTC may be compensated” |
February 27, 2020 NHTSA CAMPAIGN NUMBER: 20V117000
If the lifting mechanism fails, the truck body could fall quickly, increasing the risk of an injury to those nearby.
NHTSA Campaign Number: 20V117
Manufacturer M H EBY
Components EQUIPMENT
Potential Number of Units Affected 549
Summary
M H EBY is recalling certain 2017-2020 EBY Truck Body dump vehicles. The cotter pin that secures the hoist cylinder may detach possibly causing the dump body to fall unexpectedly.
Remedy
M H EBY will notify owners, and dealers will remove the cotter pin and replace it with a secure bolt with a locking nut, free of charge. The recall began September 25, 2020. Owners may contact M H EBY customer service at 1-717-354-4971.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
IMPORTANT SAFETY RECALL 20V-117
Dear Sir or Madam:
This not ice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
M. H EBY has decided that a potential safety defect exists in certain hydraulic hoists provided by Harsh International Company. Accordingly a recall to address this issue is being initiated effective March 8, 2019.
The defect involves a cotter pin which maybe undersized and or incorrectly installed in hydraulic hoists manufactured by Harsh International Company between February 2017 and February 2020. This may result in cotter pin falling out causing t he cross shaft to shift allowing for the top of the hoist to disengage causing a piston failure. Attached please find detailed instruct ion of the inspection process and installation of the bolt and nut. M H EBY will supply to the owner of the truck body all replacement parts. There is no cost to the owner for this recall. In the event your current service facility cannot attend to this in a timely manner,. Please contact M H EBY Warranty department at 717-354-1458 to make arrangements for an inspection and repair.
To be reimbursed for your expense to have the hoist checked and the cotter pin replaced with a bolt and locking nut you must submit a paid receipt to:
M H EBY Inc .
1194 Main St
Blue Ball Pa. 17506
Attention Warranty Department
The truck body serial number(s) for the affected unit (s) is /are:
14919. Current status of recall: NOT COMPLETED
The truck body Serial Number(s) for the affected unit (s) is /are:
Current status of recall: NOT COMPLETED
Your assistance with this recall is appreciated. Should you have any questions or concerns, please contact M H EBY Warranty Department at 717-354-1458 or by e-m ail Dave.Baltz@MHEBY.com
If you believe that M H EBY in c. or its service provider has failed or is unable to remedy the defect in your vehicle, without charge, with in a reasonable period of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., SE, Washington, DC 20590. Alternatively, you may call the NHTSA’s toll-free Safety Hotline at 888-327-4236 (TTY 800 -424-9153), or go to https://www.safercar.gov.
Sincerely,
David Baltz
Warranty Manager
M H EBY Inc
MANUFACTURERS OF ALUMINUM TRAILERSAND BODIES DISTRIBUTORSOF NEW ANDUSED REFRIGERATED TRAILERS
4 Affected Products
Vehicle
MAKE | MODEL | YEAR |
EBY | DUMP BODY | 2017-2020 |
6 Associated Documents
Recall Acknowledgement
RCAK-20V117-7057.pdf 245.248KB
Defect Noticel 573 Report
RCLRPT-20V117-3478.PDF 212.814KB
Owner Notification Letter(Part 577)
RCONL-20V117-3819.pdf 857.705KB
Manufacturer Notices(to Dealers,etc)
Recall Quarterly Report #2, 2020-4
RCLQRT-20V117-5605.PDF 211.223KB
Recall Quarterly Report #1, 2020-3
RCLQRT-20V117-9973.PDF 211.114KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V117&docType=RCL
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
- SUPERIOR WEAR PROTECTION: U1P ISO AW 68 Hydraulic Oil minimizes friction and wear for extended equipment life.
- VERSATILE PERFORMANCE: Suitable for high-pressure industrial applications, this fluid remains stable across wide temperature ranges, safeguarding critical components and seals.
- ADVANCED RUST & CORROSION PREVENTION: Protects hydraulic systems from rust and corrosion for optimal operation.
- OUTSTANDING DEMULSIFICATION: Separates water for cleaner oil and improved system life.
- EXCELLENT FILTERABILITY: Maintains performance at high temperatures and prevents filter clogs.
- Reduces the operating temperature of hydraulic systems
- Conditions old seals and O-rings to stop and prevent future leaks
- Well suited for use in equipment with wet brakes
- Removes varnish and restores pressure for more efficient operation
- Compatible with both synthetic and conventional hydraulic fluids
- MAG 1 AW32 (ISO32) 10-Weight Hydraulic Fluid is a high quality oil that is ideal for use in most 2-stage log splitter pumps. Benefits include exceptional protection against wear from contaminants and higher operating temperatures and pressures ensures longer equipment life.
- Formulated with highly refined group ii base stocks for added resistance to thermal breakdown
- Superior wear protection to protect critical components
- Excellent frictional properties for smooth-shifting, excellent anti-shudder performance
- J20c equivalent, protection against varnish and sludge formation
- Superior thermal stability and oxidation resistance, good seal compatibility
- Formulated with premium base stocks for added resistance to thermal breakdown
- Outstanding wear protection
- Excellent resistance to system rust and oil oxidation
- Maintains excellent water separating properties
- Excellent foam control and air release deliver consistent system operation
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.