| “This site contains affiliate links for which OEMDTC may be compensated” |
February 20, 2018 NHTSA CAMPAIGN NUMBER: 18V125000
A wheel and hub detachment increases the risk of a crash.
NHTSA Campaign Number: 18V125
Manufacturer Kaufman Trailers of NC, Inc.
Components SUSPENSION
Potential Number of Units Affected 189
Summary
Kaufman Trailers of NC, Inc. (Kaufman) is recalling certain 2018 Kaufman Double Deck Car Hauler trailers, model numbers FE-3/7K-44 and FE-3/7K-47. The axles may have incorrect spindles which may fail, resulting in the detachment of a wheel and hub from the trailer.
Remedy
Kaufman will notify owners, and dealers will inspect the axles and replace any axles that have incorrect spindles, free of charge. The recall began on February 28, 2018. Owners may contact Kaufman customer service at 1-336-790-2756 or 1-336-790-6800.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| KAUFMAN | DOUBLE DECK CAR HAULER | 2018 |
6 Associated Documents
Recall Acknowledgement
Loading...
Reload document 
Open in new tab
Defect Notice 573 Report
RCLRPT-18V125-4774.PDF 215.229KB
Loading...
Recall Quarterly Report #1, 2018-1
RCLQRT-18V125-6552.PDF 211.286KB
Loading...
Recall Quarterly Report #3, 2018-3
RCLQRT-18V125-5233.PDF 211.286KB
Loading...
Recall Quarterly Report #2, 2018-2
RCLQRT-18V125-6412.PDF 211.286KB
Loading...
Recall Quarterly Report #4, 2018-4
RCLQRT-18V125-6278.PDF 211.393KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V125&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
- Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- High Strength Straight Steel Axle Tube
- Axle comes fully assembled, so all you'll have to do is attach the springs, the U-bolt kits, and the tire and wheel assemblies.
- Underslung - Spring seats are welded to the bottom of the axle, which allows for a lower ride height.
- Trailer Axle Design for use on Light Duty Trailers
- EZ Lube Design Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting Grease your axle without pulling off your whole entire hub
- Internal Wiring System To ensure seamless design Protect brake wires from wear and tear
- High Strength Straight Steel Axle Tube Construction to ensure Even Tire Wear A better highway experience
- Underslung - Axle is welded with spring seats on the bottom Allows for lower ride height For optimal usage, use with double eye springs
- 72" from Hubface to Hubface and 58" Spring Center to Spring Center.
- Springs are 25 1/4" long and 1 3/4" wide
- 4 Leaf Springs
- 2-3/8" Main Tube
- 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs.
- Capacity: 2000 lbs, Tube:1-3/4 | 5x4.5 Bolt Pattern
- EZ Lube Design: Removable rubber plug on the hub cap with easy access to a grease-able zerk fitting. Grease your axle without pulling off your whole entire hub.
- Internal Wiring System: To ensure seamless design and protect brake wires from wear and tear.
- High Strength Straight Steel Axle Tube Construction: To ensure even tire wear and a better highway experience.
- Underslung - Axle is welded with spring seats on the bottom: Allows for lower ride height. For optimal usage, use with double eye springs.
- Versatile Design - Compatible for use on Medium Duty Trailers Utility, Boat, Car Haulers, ATV, Lawn & Landscape, Flatbed, Livestock, Cargo, Enclosed, RV Trailers, Dump, Lowboy, Flatbed Trailers and more
- EZ Lube design for effortless maintenance - grease your axle without removing the whole hub assembly
- Underslung - Our trailer axle beam is welded with spring seats on the bottom Allows for lower ride height, for optimal usage, use with double eye springs
- High-Strength Construction - Made with straight steel axle tube to ensure even tire wear and a better highway experience
- Easy Installation - Simply pair with double eye springs for optimal usage and get your trailer back on the road in no time
- Specs: 3,500 lbs Idler Trailer Axle (Capacity 3.5K), 5 Lug, Tube: 2 3/8"
- High Strength Straight Steel Axle Tube
- Axle comes fully assembled, so all you'll have to do is attach the springs, the U-bolt kits, and the tire and wheel assemblies.
- Underslung - Spring seats are welded to the bottom of the axle, which allows for a lower ride height.
- Trailer Axle Design for use on Light Duty Trailers
- 2,000 lbs capacity
- Stub axles can be bolted (hardware not included) or welded to trailer frame
- 45 degree downward starting angle
- Perfect item to easily build your own custom motorcycle trailer
- Read product description below for more detailed information.
- 60" from Hubface to Hubface and 48" Spring Center to Spring Center.
- Springs are 25 1/4" long and 1 3/4" wide.
- 4 Leaf Springs
- 2-3/8" Main Tube
- 5 Lug with a 4 1/2" bolt pattern. 1/2 lug studs.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.