Fatigue Cracks in Frame – 2016-2020 McElrath Trailers VX50-800 & VX30-800 Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

January 31, 2020 NHTSA CAMPAIGN NUMBER: 20V060000

Fatigue Cracks in Frame

The cracked welds may affect the trailer’s handling, increasing the risk of a crash.

 

NHTSA Campaign Number: 20V060

Manufacturer Conel, LLC dba McElrath Trailers

Components STRUCTURE

Potential Number of Units Affected 305

 

Summary

Conel, LLC dba McElrath Trailers (McElrath Trailers) is recalling certain 2016-2020 VX50-800 and VX30-800 trailers. The welded area of a structural joint of the trailer frame may crack from fatigue.

 

Remedy

McElrath Trailers will notify owners, and Vermeer dealers will add additional trailer frame gussets to reinforce the welding area, free of charge. The recall began March 27, 2020. Owners may contact McElrath Trailers customer service at 1-888-686-7278.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


FIELD CAMPAIGN
SERVICE BULLETIN #

SVM2020-002

DATE:

12 March 2020

 

Subject:

Trailer Frame Reinforcement Kit (VMK00-0504)

 

Background:

McElrath has decided that a defect, that relates to motor vehicle safety, exists in certain model year 2017 – 2020 McElrath VX30-800 and VX50-800 model trailers. McLaughlin is administering this campaign on behalf of McElrath.

 

TRAILER FRAME FAILURE MAY OCCUR

During towing, higher than expected frame loading may result in bending and/or fatigue cracks of the trailer frame main beam. If a fracture occurs, unpredictable trailer handling may result.

 

DEATH OR SERIOUS INJURY POSSIBLE

When towing the vacuum excavator on public roadways, a crash may occur resulting in death or serious injury if the trailer frame fails. Property or equipment damage may also occur.

 

Solution:

IMMEDIATE MACHINE MODIFICATIONS REQUIRED

VMK00-0504 has been created to provide the necessary parts and instructions to reinforce the trailer frame. This kit must be installed as soon as possible.

Please be reminded that it is a violation of Federal law for you to sell or lease the machines covered by this notification until this recall has been performed on these machines. Substantial civil penalties apply to violations of this law.

 

DEALER PARTICIPATION

REVIEW REPORT, ORDER KITS, CONTACT CUSTOMERS

  1. Reports will be emailed during the week of March 12, 2020, to dealerships shown in our records which have units in their territory affected by this Alert. Please review the report for accuracy, including owner and/or address changes.

If the information contained in the report is NOT correct, please notify Vermeer Corporation Product Safety Department on or before March 25, 2020 at:

Telephone: 641-621-7060
Fax:  641-621-8562
Email: productsafety@vermeer.com

 

  1. Dealerships Order Kits by contacting McLaughlin at:

Telephone: 864-277-5870
Email: partsorder@mightymole.com

Each dealership should determine the quantity of Kits to order initially depending upon the number of units that may be available for immediate upgrade. Do not order more Kits than needed for immediate installation.

 

  1. Contact your affected customer(s) to schedule a mutually acceptable time to upgrade their machine. Note: Letters will be sent to the customer(s) on or about March 26, 2020. Also refer to Owner Notification section below.

 

If you have any questions concerning the installation of VMK00-0504, please contact the McLaughlin Service Department at 864-277-5870.

 

Note: Future notices to dealers and owners are dependent upon the receipt of Warranty Claims by the Vermeer Corporate Warranty Department.

 

REIMBURSEMENT

Upon completion of each Kit installation, a Warranty Claim must be submitted to the Vermeer Corporation Warranty Department for reimbursement of the cost of the Kit and labor, 3.5 hours.

 

OWNER NOTIFICATION

Sample Letter: Included at the end of this Bulletin is a sample letter which will be sent by Vermeer Corporation directly to the Owners on or about March 26, 2020, via USPS certified/registered mail. The owner notification will be translated into:

  • Spanish

All translated owner notices will also include English owner notification.

This owner notification/letter instructs the owner to contact their local dealership to arrange for a time to have the Kit installed. After receiving VMK00-0504 from the McLaughlin Parts Center, you must contact your affected customer(s) immediately and schedule a mutually acceptable time to upgrade their machine.

We regret any inconvenience these corrective measures may cause you. This required work is for safety of the towing vehicle occupants and other drivers and passengers on the public roadways. We hope you agree the safety benefits surpass the inconvenience.

 

McLAUGHLIN GROUP, INC.

 

Attachment:

VMK00-0504 Kit Instructions



NHTSA SAFETY RECALL NUMBER NHTSA 20V-060

IMPORTANT SAFETY RECALL

First Notice
Trailer Frame Reinforcement Kit (VMK00-0504)

Model: «Model»
This notice applies to your vehicle,
Serial No: «VIN»

 

March 26, 2020

VIA USPS CERTIFIED/REGISTERED MAIL

 

Dear «MODEL» Owner:

This notice is sent to you in accordance with the requirements of the U.S. National Traffic and Motor Vehicle Safety Act.

McElrath has decided that a defect, that relates to motor vehicle safety, exists in certain model year 2017 – 2020 McElrath VX30-800 and VX50-800 vacuum excavator trailers. McLaughlin is administering this campaign on behalf of McElrath.

 

TRAILER FRAME FAILURE MAY OCCUR

During towing, higher than expected frame loading may result in bending and/or fatigue cracks of the trailer frame main beam. If a fracture occurs, unpredictable trailer handling may result.

 

DEATH OR SERIOUS INJURY POSSIBLE

When towing the vacuum excavator on public roadways, a crash may occur resulting in death or serious injury if the trailer frame fails. Property or equipment damage may also occur.

 

IMMEDIATE MACHINE MODIFICATIONS REQUIRED

VMK00-0504has been created to provide the necessary parts and instructions to replace to reinforce the trailer frame. The kit must be installed as soon as possible.

Please contact your authorized, independent Vermeer dealer immediately to arrange a mutually acceptable time and location to install VMK00-0504 at no cost to you for labor or materials. The installation of this kit is estimated at 3.5 hours of labor.  If the Vermeer dealer travels to the unit to install the kit, costs may be incurred by the owner. You must have your machine upgraded for these safety features.

 

Contact your local Vermeer Dealer:

«Service_Dealer_Name»
«Serv_Dealer_Add1» «Serv_Dealer_Add2»
«Serv_Dealer_City» «Serv_Dealer_St» «Serv_Dealer_Zip»
«SERV_DEALER_COUNTRY»

Telephone:

«Serv_Dealer_Phone»

 

According to our records, you currently own a McElrath «MODEL» vacuum excavator trailer. The Model and Serial Number of the «MODEL» is shown at the top right of this letter.  If you no longer own this unit, please notify the Product Safety Department at:

Toll Free:  800-829-0051, extension 7060
Telephone: 641-621-7060
E-mail:  productsafety@vermeer.com

If possible, please provide the name and address of the new owner.

We regret any inconvenience that these corrective measures may cause you. The required work is for the safety of the towing vehicle occupants and other drivers and passengers on the public roadways. We hope that you agree that the safety benefits surpass the inconvenience.

 

Very truly yours,

PRODUCT SAFETY DEPARTMENT

 

Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten (10) days.

If the authorized dealer has failed or is unable to remedy the defect without charge and within a reasonable time, contact Vermeer Product Safety, on behalf of McElrath and McLaughlin Group, Inc., by email at productsafety@vermeer.com or by calling 800-829-0051 or 641-621-7060. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, D.C. 20590 or call the Vehicle Safety Hotline at 888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov



10 Affected Products

Vehicles

MAKE MODEL YEAR
MCELRATH TRAILERS VX30-800 2016-2020
MCELRATH TRAILERS VX50-800 2016-2020

 


13 Associated Documents

Defect Notice 573 Report

RCLRPT-20V060-9285.PDF 212.762KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [207.78 KB]

 


Recall Acknowledgement

RCAK-20V060-6481.pdf 245.619KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.86 KB]

 


Miscellaneous Document- VX50 Literature

RMISC-20V060-6034.pdf 1199.245KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.14 MB]

 


Miscellaneous Document- VX30 Literature

RMISC-20V060-4061.pdf 3076.28KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [2.93 MB]

 


Miscellaneous Document- Vermeer MV Solutions Literature

RMISC-20V060-1012.pdf 1340.857KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.28 MB]

 


Recall Quarterly Report #1, 2020-1

RCLQRT-20V060-7231.PDF 211.125KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.18 KB]

 


Remedy Instructions and TSB

RCRIT-20V060-4438.pdf 1885.295KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [1.80 MB]

 


Safety Bulletin

RCSB-20V060-1276.pdf 1040.963KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [0.99 MB]

 


Recall Quarterly Report #2, 2020-2

RCLQRT-20V060-0638.PDF 211.225KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.27 KB]

 


Recall 573 Report- Amendment 2

RCLRPT-20V060-1348.PDF 216.008KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.95 KB]

 


Miscellaneous Document

RMISC-20V060-4976.pdf 218.351KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [213.23 KB]

 


Recall Quarterly Report #4, 2020-4

RCLQRT-20V060-3031.PDF 211.422KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.47 KB]

 


Recall Quarterly Report #3, 2020-3

RCLQRT-20V060-2468.PDF 211.309KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.36 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V060&docType=RCL

 


 

Bestseller No. 1
YESWELDER 135Amp MIG Welder,110V Flux Core Welder Flux MIG/Lift TIG/Stick 3-in-1 Large LED Digital Display Welding Machine IGBT Inverter Welder FLUX-135PRO
  • [MORE POWERFUL] Up to 135 Amp output allows you to weld mild steel up to 2/5” in the plate. Suitable for 2LB .030” & .035” flux core wire.
  • [MULTI-PROCESS] 3-in-1 Welder, capable of Gasless MIG/Stick/Lift TIG. (need to buy an extra lift TIG torch) Meets your various welding needs.
  • [DIGITAL DISPLAY] Advanced digital display, increases the visual clarity and improves the efficiency of the operation.
  • [SYNERGIC CONTROL] When adjusting the wire feeding speed, the voltage will be automatically matched. Suitable for beginners and professionals.
  • [SAFETY FIRST] Automatic compensation for voltage fluctuation, over current protection, over load protection.
SaleBestseller No. 2
ARCCAPTAIN 130A MIG Welder, 110V Flux Core MIG Welder/Lift TIG/Stick 3 in 1 Welding Machine with Synergy, IGBT Inverter Portable Gasless Welder Equipment with Welding Gun and 2lb Welding Wire
  • SYNERGIC CONTROL: The recommend current and wire feeding speed will be automatically matched after selected diameter of the welding wire(you can choose .030”/.035”/.040" flux core wire). The MIG welder is easier for beginners or those that are learning to weld and want to make small repairs around the house. 1 Free Flux Core Wire .030".
  • 3-IN-1 WELDER: 3 welding modes Flux Core Gasless MIG/ Lift TIG/ MMA meet your different requirements (Need to buy extra Lift tig torch). Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of carbon steel, stainless or even thicker steel, Ideal for home DIY, outdoor repairs, rusty metal, farm and road equipment, and maintenance and repairs.
  • SAFETY PROTECTION: The welder comes with an attached MIG torch and power cable, you can weld after unpacking the box, it’s convenient to use. Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine.
  • PORTABLE AND COMPACT: The machine weighs only 11.79 pounds, and you can freely carry it anywhere with a handle or shoulder strap. Package includes 1* MIG130 Welder, 1* MIG Torch, 1*Ground Clamp, 1* Electronic Holder, 1* .030"/2lb Flux Cored Wire,1* 0.8/.030" conductive Nozzle,1* 0.9/.035" conductive Nozzle,1* Brush&Hammer,1* User Manual.
  • WARM SERVICE & 2-YEAR WARRANTY: 30-Day Money Back Guarantee and 2-Year Warranty. Ideal for fathers day gifts. Every single of our welder machines passed various authoritative Laboratory tests in simulating extremely harsh environments before leaving our ARCCAPTAIN factory that conforms to the high standards.
Bestseller No. 3
Lincoln Electric 90i MIG and Flux Core Wire Feed Weld-PAK Welder, 120V Welding Machine, Portable w/Shoulder Strap, Protective Metal Case, Best for Small Jobs, K5256-1
  • WELD ANYWHERE: Plug in the Weld-Pak 90i MIG wire feed welder anywhere 120V input power is available; It's designed to use with flux-cored welding wire (1/4” max thickness) or solid MIG wire (3/16" max thickness)
  • ACCESSORIES INCLUDED: The machine comes with a full list of accessories including a welding gun, nozzle, contact tip, work cable and clamp; Metal case provides protection from the elements
  • LIGHT & PORTABLE: Ideal for maintenance and mobile welders, thanks to its small and lightweight (15 lbs) inverter design and shoulder strap for portability; A good choice for professionals but it’s an easy to use welder for beginners too
  • SMOOTH & EASY OPERATION: Has simple control with two knobs for wire speed and voltage; Inverter power source makes it more efficient to operate and provides smoother weld characteristics compared to traditional welders
  • PERFECT FOR SMALL WELD JOBS: This machine is best for DIY projects, hobbyists, home repairs and more; Infinite welding voltage allows fine-tuning of weld characteristics
Bestseller No. 4
AZZUNO MIG Welder,Flux Core Welder Machine 110V 130Amp, Gasless MIG Welding Machine IGBT Inverter Welder Portable Wire Feed Welder (110V)
  • Easy to Use: The welding machine has included with voltage control knob,wire speed adjustment knob and with synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. Even beginners can use it easily.
  • Powerful And Safe Machine:This 130A Welding machine can weld mild up to 3.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.Big enough to handle 2.2 pound rolls of wire.
  • Portable Design: Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want; It only weighs 8.7 lbs., so you can effortlessly take it as far as you can.
  • Wide Applications:It can be used with a wide variety of metals and alloys.Suitable for home users, DIY craft enthusiasts, beginners and small projects.
  • Package Includes:130 MIG welding machine; Mig torch; Ground clamp; Brush&Hammer; 1lb .030" flux cored welding wire.
Bestseller No. 5
Lincoln Electric Power MIG 211i MIG Welder K6080-1
  • Simple user interface - Seven segment display with basic knob controls.
  • Process Capabilities - MIG, Flux-Cored and Spool Gun.
  • Dual Input Voltage - 120V and 230V inputs so you can plug into any common power supply.
  • Ergonomic Case - Sleek and robust case design with multiple lift points for ease of mobility around the shop.
  • Lightweight and Portable - Only 41 lbs
Bestseller No. 6
AZZUNO 200A MIG Welder,110V/220V Dual Voltage multiprocess welder,Gas Gasless MIG Welding Machine,4 in 1 Flux MIG/Solid Wire/Lift TIG/Stick ARC Welder (Grey)
  • 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose.
  • Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it.
  • Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 8.0mm.
  • Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 1.0MM-8.0MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E6013.
  • Powerful And Safe Machine:This 200A Welding machine can weld mild up to 8.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.
SaleBestseller No. 7
TOOLIOM 200M MIG Welder 3 in 1 Flux MIG/Solid Wire/Lift TIG/Stick Welder 110 / 220V Dual Voltage Welding Machine
  • Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
  • Multi-functions in one machine: Suitable for stick, lift TIG(torch is not included), flux MIG, gas MIG
  • Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate.
  • Big enough to apply to 2 and 10 pounds rolls of wire. Ready to feed .030"(0.8mm) with solid core wire, and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode.
  • Dual voltage input design: Welding machine can be plugged into 110(120)V / 220(230)V dual voltage (Automatic fitting).
Bestseller No. 8
S7 200Amp MIG Welder,110V&220V 4 in 1 MIG&ARC&Lift TIG Gas/Gasless Inverter Multi-Process Dual Voltage Welding Machine
  • 🛡️★Multi-Function Welding Machine: IGBT Full 20-200Amp(Max) with Digital Display for reliable quality and stable performance. Suitable for MMA, Lift TIG, Flux MIG, and Gas MIG. Big enough to handle 2 to 5 pound rolls of wire.
  • 🛡️★Powerful Welding Capability: Up To 200A Output Current That Can Weld Mild Up To 5/32 Inch (4.0mm) Plate.MAX 5 Pound Rolls Of Wire.030"(0.8mm) With Solid Core Wire, And .035" (0.9mm)With Flux Core Wire.Can Handle E7018 Basic Electrode
  • 🛡️★Complete Welding Kit: Includes MIG Gun(2.8M), Ground Clamp and Holder (2M), 220V to 110V Adapter, Drive Roller Wheel, Contact Tips, Gass Nozzles, and Welder Operation Manual. Processes recommended for MIG-Cast Iron, Copper, Brass, Titanium, Magnesium Alloys. Flux Cored- Aluminium, Cast Iron, Copper, Brass, Titanium.
  • 🛡️★Intuitive Synergic Design: Synergic Control with automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. The MIG-200 is capable of true lift TIG (TIG Lift Torch not included) welding as well as stick welding.
  • 🛡️★Safety Features: Automatic protection function for over-current, over-voltage, and over-heating.
Bestseller No. 9
Uweld 250A MIG Welder,6 in 1 Gas MIG/Gasless Flux Core/Stick/Lift TIG/Spot Weld/Spool Gun Compatible Aluminum Welding Machine Large LED Display 110V/220V Multi Process Welder
  • 6 in 1 Welding Machine: The multi-function welding machine included Gas/Solid Wire MIG, Gasless Flux Core MIG, Stick/MMA, Spot welding, Lift TIG, spool gun compatible (tig gun and spool gun not included,WP-17V-35,LBT150)
  • MIG Synergic Control: When you selecting wire diameter and gas material,the welder will automatically match recommended current and wire feed speed.So, it’s very easy for beginners.Also, if you are experienced welder, you can adjust the welding current according to your personal welding habit.
  • Can Weld Aluminum:This Multi MIG welder can weld various of metals,It can not only weld stainless steel,alloy steel,iron but also can weld aluminum.It has two ways to weld aluminum, to install the teflon wire feed tube or use spool gun.
  • Wide Application:Various Welding Wire Suitable,suitable for all kinds of welding requirements .023”/.030”/.035” solid wire, .023”/.030”/.035” flux core wire,.035”/.040”/.045” aluminum wire.
  • Powerful And Safe Machine:This 250A Welding machine can weld mild up to 8.0mm plate,equipped with overload / over-voltage/over-current/overheating system,feel free to use,it’s very safe.
Bestseller No. 10
HEY UP MIG Welder, 140Amp 2 IN 1 Stick/Flux Core Welder with 2LBS Flux Cored Wire, 110V/220V Dual Voltage Welding Machine with Electrode Holder, IGBT Inverter Welder
  • 【IGBT Inverter Welder】This welder can perform STICK(ARC)/MIG welding. The unique IGBT control mode improves the reliability of the welder, which can ensure good arc stability and provide smoother welding and deeper depth of melt with stable welding current for perfect welding. Perfect for beginners or professionals for small welding operations.
  • 【Safe and stable welder】The welding machine is designed with 110v/220v dual voltage, stable wire feeding, good arc leading, easy to control and suitable for different welding requirements. MIG/STICK welder is also equipped with overheat protection to improve welding efficiency and ensure your safety. The high performance fan motor provides cooling function to promote the heat dissipation of the machine and prolong the service life of the machine.
  • 【Portable Welder】MIG welder machine is made of high quality material, compact mini body design (12.9*6*6.5 inches, 11LBS), easy to move and store. The user-friendly handle design of the flux core welder allows you to use your welding creativity anytime and anywhere. Whether you work indoors or outdoors, the handle design allows you to carry it around and weld whenever you want.
  • 【Easy to operate】The flux core welding machine is a super easy to operate 2-in-1 welder that can effectively handle iron and carbon steel welding tasks with flux cored wire sizes of 0.030" and 0.035", you can set the current range according to the thickness and characteristics of the material, with an output current of up to 140 amps and an ARC mode that supports welding of E7018 and E6013 electrodes.
  • 【Big enough for wiring space】Changing wire feeders or wire feed wheels is a simple process, as is using our multi-process MIG welding machine that can handle 2 lbs of flux cored wire. In addition, the spacious interior makes handling MIG welding tasks easier. If you have any questions, please feel free to contact us.

Last update on 2024-03-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...