| “This site contains affiliate links for which OEMDTC may be compensated” |
December 18, 2019 NHTSA CAMPAIGN NUMBER: 19V901000
Hitch Bolts Improperly Tightened
If the bolts loosen, a towed trailer or vehicle could detach from the motorhome, increasing the risk of a crash.
NHTSA Campaign Number: 19V901
Manufacturer MORryde International, Inc.
Components TRAILER HITCHES
Potential Number of Units Affected 219
Summary
MORryde International, Inc. (MORryde) is recalling certain 2020 Forest River Georgetown and FR3 motorhomes that they modified. The trailer hitch bolts may have been improperly tightened, which can cause the hitch bolts to loosen.
Remedy
Forest River will notify owners, and Forest River dealers will properly tighten the bolts, free of charge. The recall began December 9, 2019. Owners may contact MORryde customer service at 1-574-293-1581.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
December 9, 2019
To: Forest River # 68, Attn: Keith Fisher
From: MORryde International, Inc.
This letter is to make you aware of a recall we are issuing for units that had hitches installed at MORryde between 8/9/2019 – 11/22/2019. The beginning date may change as we’re still investigating but these are the known dates at this time. It’s been brought to our attention that the bolts securing the hitch to the chassis could be potentially under-torqued causing the hitch to separate from the chassis. MORryde made an internal change with equipment on 11/22/2019 so all units from that date going forward should be good.
Due to the potential safety risk, MORryde is issuing a safety recall. Though we’re not aware of any safety related issues currently, we’re erring on the side of safety for our customers.
For additional information on this recall, please contact MORryde warranty.
Phone: 574-293-1581
Email: morrydewarranty@morryde.com
Sincerely,
Debbie Kauffman
2 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FOREST RIVER | FR3 | 2020 |
| FOREST RIVER | GEORGETOWN | 2020 |
3 Associated Documents
Manufacturer Notices(to Dealers,etc)
Loading...
Reload document 
Open in new tab
Defect Notice 573 Report
RCLRPT-19V901-5835.PDF 212.58KB
Loading...
Recall Acknowledgement
RCAK-19V901-8392.pdf 244.478KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V901&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
Bestseller No. 1
KUAFU Universal RV Trailer Hitch 2 Inch Class 3 Mount Receiver Tow Hitch Fits UP to 72" Frame Replacement for 13703 Adjustable
- Wide Application: Suitbale for a ball mount, cargo carrier, bicycle frame, trailer hitch, winch and other heavy accessories. Durable and reliable in bad weather. Fastens to the frame with included hardware.
- Premium Quality: Made of heavy duty steel for maximum strength and safety whiling towing. Gross Trailer Weight: 3500 lbs; Tongue Weight: 350 lbs.
- Specification: Surface Finish: Black Powder Coated; Attachment Location: Rear; Receiver Size: 2''. Direct replacement for 13703. Fit for 72 inch wide frames.
- Package Included: You will receive 1 X Trailer Hitch, others as shown in pictures. Note: Instructions & mounting hardware are included.
- Installation: Direct bolt on installation. No modification required. Professional installation is always highly recommended.
Bestseller No. 2
CURT 13703 Camper Adjustable Trailer Hitch RV Towing, 2-Inch Receiver, 3,500 lbs., Fits Frames up to 72 Inches Wide
- DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer
- EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 72 inches wide
- FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
- RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage
Bestseller No. 3
KUAFU Adjustable Trailer Hitch RV Trailers 5th Wheel 2 Inch Towing Hitch Receiver Powder Coated Steel Black
- Fitment: This trailer hitch is great for tow fishing boat trailers, popup campers, trailers and bikes. Widely used in daily life.
- Function: 2" hitch for travel trailers and fifth wheels. It is mounted on the rear of the trailer and is used to tow the vehicle when facing trouble. Class I hitch bolted onto frame, Max tongue weight : 200 pounds. Class II hitch welded to frame, tongue weight: 300-350 pounds.
- Feature: Material: Steel; Color: Black; Finish:Powder Coated. Durable, strong strength and impact resistance meet your towing needs.
- Package Include: 1pc of trailer hitch. Mounting hardware and instruction are included.
- Installation: Install by screws. Professional installation is always highly recommended.
Bestseller No. 4
Ohuhu Bolt-on RV Bumper Hitch Receiver Adapter Fits 4-4.5" Beam, 2" Receiver with Hitch Pin & Hitch Cover
- Quick, Easy Installation: No need for complicated welding to make the Ohuhu Hitch Receiver work. You can hook it up to a bicycle rack, RV tire rack, cargo rack or other accessories. Simply install it on the bumper and you are good to go.
- Sturdy & Durable: Hold it together, for the long term! Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs. You can trust in the Ohuhu Trailer Receiver to do its job every time.
- Use Only For 2"*2" Square Tubes: : Designed specifically for 4"-4.5" bumpers, this receiver is made for use with 2"*2" square tubes. Ensure that there is at least 1" of space between the bumper and trailer before installation.
- 200lbs Tongue Weight Capacity: The Ohuhu Camper Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes).
- Accessories Included: Also included with your purchase are a set of 5/8" hitch pins and 1 rubber cap. Use the pins to secure the rack once installed on the hitch receiver to make it more stable, and the rubber cap to cover the hitch receiver when not in use.
Bestseller No. 5
REYSUN Trailer Hitch 863803 RV Bumper Hitch Receiver Adapter, 2 inch Receiver, Fits 4 inch Square RV Rear Bumpers, Hitch Pin Kit Included
- This RV bumper hitch fits 4 inch x 4 inch RV or travel trailer bumper, use for both downside and upside
- The RV bumper hitch adapter accepts hitch mount of 2 inch receiver shank such as bike racks, RV tire carriers, cargo carriers or other accessories, could offer a low hitch mount to provide RV trailer towing
- Capacity: 3500lbs. Gross trailer weight, 350lbs. Max tongue weight, Do NOT use for towing purposes
- Heavy duty steel via robotically welded for superior strength provide excellent mounting facility, high quality hardware fittings, all make this trailer hitch more durable
- ECORROSION RESISTANT: Made of strong steel with a durable black powder coat finish, super corrosion resistant
Bestseller No. 6
TLAPS 7422446180130 Compatible with RV Towing Class 3 III Black 2" Receiver Trailer Hitch (Frames Up to 72" Wide)
- Application: Universal To Mount On Variety Of RV Styles With Frames Up To 72" Wide ( Please Make Sure Your Frames Are Wide Enough Before Purchasing This Item )
- Trailer Hitch ( Pin, Clip, Ballmount & Wirings Are Not Included )
- Hitch Class: Class 3, Receiver Size: 2" Receiver Tube, Built With A 3-Piece, Adjustable Design
- Towing Specifications: Gross Trailer Weight - 3500 lbs , Tongue Weight - 350 lbs, Fits Frames Up To 72" Wide, Designed For Towing A Bike Rack, Trailer Or Small Vehicle Behind AN RV
- Black
Bestseller No. 7
CURT 13704 Camper Adjustable Trailer Hitch RV Towing, 2-Inch Receiver, 5,000 lbs., Fits Frames up to 66 Inches Wide
- DEPENDABLE STRENGTH. This RV trailer hitch is rated for 5,000 lbs. gross trailer weight and 500 lbs. tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer
- EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 66 inches wide
- FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
- RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage
Bestseller No. 8
Stromberg Carlson CC-300 Product Accessory Hitch Adjustable, Black
- 2" hitch for travel trailers and fifth wheels
- Bolt (Class I) or weld (Class II) onto the frame
- For use with bike racks, cargo carriers and other accessories
- Not to be used pulling cars or boats if bolted in Class I configuration
- Mounts to the side wall of frame or horizontal wall of C-channel or I-beam with angled hardware
Bestseller No. 9
CURT 13701 Camper Adjustable Trailer Hitch RV Towing with 2-Inch Drop, 2 in. Receiver, 5,000 lbs., Fits Frames up to 51 Inches Wide
- DEPENDABLE STRENGTH. This RV trailer hitch is rated for 5,000 lbs. GTW, 500 lbs. TW, 6,000 lbs. WD and 600 lbs. WDTW (limited to lowest-rated towing component)
- VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can be used for dinghy towing, flat towing or towing a trailer
- EASY TO INSTALL. Installation of this RV camper hitch is fast and easy. It securely bolts into place with the included grade-8 hardware and typically requires just a few tools. The 3-piece adjustable design fits RV frames up to 51 inches wide
- FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
- RUST, CHIP, UV-RESISTANT. This RV towing hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The two finishes are co-cured for exceptional resistance to rust, chipping and UV damage
Bestseller No. 10
CURT 19100 Camper RV Bumper Hitch, Fits 4-Inch Beam, 2-In Receiver, 3,500 lbs
- DEPENDABLE STRENGTH. This RV trailer hitch is rated for 3,500 lbs. gross trailer weight and 350 lbs. tongue weight (limited to lowest-rated towing component)
- VERSATILE DESIGN. This trailer hitch RV equips your camper with a standard 2-inch x 2-inch hitch receiver, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more
- FULLY TESTED. Every CURT camper hitch design is tested at our Detroit engineering facility according to SAE J684 standards for the utmost safety and reliability while towing
- RUST, CHIP, UV-RESISTANT. This camper bumper hitch is protected with a dual-coat finish of rust-resistant A-coat and highly durable black powder coat. The finishes are co-cured for exceptional resistance to rust, chipping and UV rays
- EASY TO INSTALL. Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 4-inch x 4-inch RV bumper with the included hardware and typically just a few tools
Last update on 2024-04-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.