November 6, 2019 NHTSA CAMPAIGN NUMBER: 19V795000
Improperly functioning brake lights could confuse following motorists and fail to warn them that the bus may be stopping, increasing the risk of a crash.
NHTSA Campaign Number: 19V795
Manufacturer Blue Bird Body Company
Components EXTERIOR LIGHTING
Potential Number of Units Affected 16,402
Blue Bird Body Company (Blue Bird) is recalling certain 2013-2020 Vision school buses equipped with Ford engines. The brake light switch mounting bracket may have caused the brake light switch to be incorrectly adjusted at installation and/or the brake light switch mounting bracket may deform when the driver allows the brake pedal to return forcibly. An incorrectly adjusted brake light switch or deformed brake light switch mounting bracket may cause the brake lights to illuminate continuously.
Blue Bird will send owners an interim notification beginning December 17, 2019, and will mail a second letter when parts become available, currently expected to be in March 2020. Dealers will install a new, redesigned brake light switch mounting bracket along with a new brake light switch, free of charge. Owners may contact Blue Bird customer service at 1-478-822-2242. Blue Bird's number for this recall is S19AI-SB.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
8 Affected Products
2 Associated Documents
Defect Notice 573 Report
Latest Recalls Documents
- Twice the life of standard incandescent bulbs
- Best value
- Original equipment quality seal for the most reliable performance
- Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Bulbs dim over time.
- Miniature bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting
- ULTRA BRIGHT LIGHTS - Yorkim 3157 Red LED Bulbs are powered by 54smd 3014 and 4smd high performance 3030 chipsets to offer extremely brightness and give a refreshed look to your vehicle. Commonly used for 3056 3057 3156 3157 4157 LED Backup Reverse Lights Bulbs.
- SPECIFICATIONS - Head diameter 15mm, Length 48mm, Voltage 9-30v, Color: Brilliant Red, Lumen: 1600Lm/bulb. A 50w Load resistor(Asin:B07KS6KMYG)might be needed to prevent error code when replace for Turn Signal Lights. You may also need a flasher relay to solve the fast blinker issue for some vehicles. Not suitable for CK sockets.
- FITMENT - 3056 3057 3057K 3057LL 3155 3157 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3356 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4057 4057LL 4057K 4114 4114LL 4114K 4157 4157LL 4157K 4157NA 4157NAK 5702A 5702AK 5702AK etc. Commonly used for Brake Lights, Backup Reverse Lights, Parking Lights, Turn Signal Lights and etc.
- HIGH QUALITY CHIPSETS - Yorkim Red 3157 backup reverse light bulbs have built in Constant Current IC, offering 3x brightness than OEM halogen bulbs. 360 Degree lighting ensures optimal visibility.
- EASY TO INSTALL - Non-Polarity design. Simply plug the bulb in and you are all set! No tool needed. Yorkim offers 1 year hassle free service on return/refund or replacement to make your purchase risk free! Package includes: 2 pcs
- Seamless replacement - this third brake light assembly was specifically designed to look and function like the original light on specific vehicles
- LED bulbs - includes long-lasting LEDs even if original included incandescent bulbs
- Excellent value - original equipment quality at a lower price
- Easy installation - built to match the exact original dimensions for proper fit
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
- (Set of 2) 1400 lumens per T20 wedge 7440 7443 LED Bulb, total 2600 lumens for both 7440 7443 LED lights bulbs with projector-lens; Each 7440 7443 LED bulb is equipped with high illumination and high power 33 pieces 5730 LED chips.
- Built-in Intelligent IC driver and 6063 aviation aluminum material for best cooling and longer lifespan.
- Working Power: 8.5W, Volts: 12V ~ 24V; Waterproof IP67; ApplicationS: Used for upgrading turn signal blinker light, back-up reverse light, daytime running light ( DRL), brake stop light,taillights, side marker light,etc.
- T20 base, Cross reference number: 7440, 7441, 7443, 7442, 7444, W21W, WY21W, 7440A, 7440NAK, 7444NAK, 7443LL.etc. Extra load resistors maybe required to avoid the signal hyper flash or error code.
- One year warranty. Please check the owner manual or the stock lamp to confirm the cross reference number before purchasing. Amazon fitment is only for reference, not 100% guaranteed accuracy.
- (Set of 2) 7443 Strobe led brake light bulbs will strobe at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs, RVs rear-end collision.
- LED Chips: 39 pieces high quality,high power with high performance 2835 led chips per 7440/7443 strobe brake led bulb ---360 degree full angle illumination with projector lens design
- T20 7443 dual filament, big difference between high and low intensity light output, replacing rear 7440 7443 brake stop light, center high mount stop ( 3rd brake ) light,etc. Extra load resistors maybe required to avoid the error code or blinking issue.
- The length is about 2.09 inch. Cross reference number: 992, 7440, 7440LL, 7440ST, 7441, 7443, 7443LL, 7443ST, 7444, W21W,etc
- One Year Warranty Compatible with both standard type and CK/SRCK type. Voltage: 12V - 24V, built in stable current IC driver for longer lifespan.
- SUPER BRIGHT LIGHTS – Yorkim 3157 LED bulbs are powered by 18 pcs of high quality 5050 chipsets to offer ultra brightness for your vehicle.
- SPECIFICATIONS - A 50w Load resistor(ASIN:B07KS6KMYG)might be needed to prevent error message when replace for Turn Signal Lights. You may also need a flasher relay to solve the fast blinker issue for some vehicles. Head diameter 18mm, Length 47mm, Voltage 12v, Color Temperature: 6500K Xenon White.
- FITMENT - 3056 3057 3156 3157 4157, commonly used for backup reverse lights, brake lights, tail lights or turn signal lights.
- EASY TO INSTALL - Non-polarity design, simply plug and play. Not suitable for CK sockets.
- Yorkim offers 1 year hassle free service on return/refund or replacement to make your purchase risk free! Package includes: 10 pcs
- (Set of 2) Chips: 39 pieces high quality,high power with high illumination led chips per 7440 7443 red led bulb ---360 degree full angle illumination with projector lens design
- Color: Brilliant pure red;Working Voltage: 12V~18V with built in IC driver for better working performance;
- Fitment: replace the bulb harness of 992, 7440A, 7440AL, 7440NA, 7440, 7440LL, 7440ST, 7440NA, 7441, 7443, 7443LL, 7443ST, 7444, 7444LL,7444NA, W21W, W21/5W, 7443-SCK, 7443-SRCK, etc
- Application: Used for upgrading the T20 socket W21W 7440 7443 brake light lamp, this bulb is compatible both Standard and CK/SRCK Type,safe and easy installation.
- Warranty: Fully ONE YEAR guaranteed for the manufacturer defect.please check the owner manual or Amazon fitment note for brake stop light or tail light application before purchasing.NOT canbus free, extra load resistors maybe required to avoid the error code or signal hyper flash.
- Two bulbs per order.
- Color:Brilliant Red.Size: 2.60" long and 0.75" in diameter. 21-pieces high power PX chipsets per bulb. It is perfect for customers who are looking for a Extremely bright output
- Lighting Output：2520 raw lumens, 1260 lumens for each bulb.Fits: 3156 3056 3356 3456 4156 3157 3047 3057 3357 3457 3757 4057 4111 4157 etc.
- The difference between running/tail (stage 1) and brake/signal (stage 2) light is great(the high intensity is about triple birhgter than the low intensity)
- Used for turn signal lights,brake lights,tail lights,etc
- (Set of 2) LED Chips: 39 pieces high quality,high power with high performance led chips per 3156 3157 LED bulb ---360 degree full angle illumination with projector lens design
- Compatible with both standard and CK / SRCK type. Voltage: 12V - 24V, Built in stable current IC driver for longer lifespan.
- Non-polarity. Fit for 3156, 3157, 3056, 4156, 3047, 3157A, 3057, 3357, 3457, 4057, 4114, 4157, 3157LL, p27/7w, 3155, 3047KX, 3157KX, etc.
- Application: Used for upgrading the stock halogen dim turn signal blinker light, brake stop lights, tail lights, side marker light amp for much safer driving and luxury looking,load resistor maybe required to avoid the fast blinking issues.
- Warranty: fully ONE YEAR guaranteed for the manufacturer defect.please check the fitment note application before purchasing.
- Specifically designed to withstand road vibration and provide longer life than traditional bulbs
- Filament and gas mixture have been engineered for improved longevity
- Meets industry regulations for performance, while bettering life expectancy.
- Produced by a trusted OEM automotive lighting manufacturer
- Set of 2 bulbs
Last update on 2019-12-03 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2019-12-03 / Affiliate links / Images from Amazon Product Advertising API