Western Star 5700

Baggage/Sleeper Side Door May Separate from Hinge – 2017-2020 Western Star 4900 & 5700

by
“This site contains affiliate links for which OEMDTC may be compensated”

October 10, 2019 NHTSA CAMPAIGN NUMBER: 19V722000

Baggage/Sleeper Side Door May Separate from Hinge

A baggage or sleeper side door that separates from the vehicle while in motion can cause road debris, increasing the risk of an injury or crash.

 

NHTSA Campaign Number: 19V722

Manufacturer Daimler Trucks North America LLC

Components STRUCTURE

Potential Number of Units Affected 2,546

 

Summary

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2020 Western Star 4900 and 5700 vehicles. The adhesive bond may fail allowing the baggage or sleeper side door to separate from the hinges.

 

Remedy

DTNA will notify owners and dealers will install reinforcement clips with mechanical fasteners on each baggage and sleeper door hinge, free of charge. DTNA issued owners an interim notification on December 6, 2019. The recall began September 21, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL834.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check for Daimler Trucks North America Recalls

 

Daimler Trucks
North America LLC

Recall Campaign

August 2020
FL834A-F
NHTSA #19V-722
Transport Canada #19-508

 

Subject: Western Star Baggage and Sleeper Doors

Models Affected: Specific Model Years 2017-2020 Western Star 4900 and 5700 model vehicles manufactured November 14, 2016, through September 12, 2019, and equipped with certain baggage and sleeper doors.

 

General Information

Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Western Star Truck Sales, Inc., has decided that a defect that relates to motor vehicle safety exists on the vehicles mentioned above.

On certain vehicles, the baggage and sleeper doors may separate from the hinge assembly. A baggage or sleeper door separating from the vehicle whilst in motion could lead to debris on the road increasing the risk of an injury and/or crash.

For the final repair, reinforcement clips/hinges with mechanical fasteners and stronger gauge screws will be installed on each baggage and sleeper door hinge.

NOTE: All vehicles that had the INT FL834 interim repair preformed require the stronger gauge screws in the final repair.

There are approximately 15,600 vehicles involved in this campaign.

Additional Repairs

Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale or delivery of a vehicle.

Owners may be liable for any progressive damage that results from failure to complete campaigns within a reasonable time after receiving notification.

 

Work Instructions

Please refer to the attached work instructions. Prior to performing the campaign, check the vehicle for a completion sticker (Form WAR260).

 

Replacement Parts

Replacement parts are now available and can be obtained by ordering the kit and/or part number(s) listed below from your facing Parts Distribution Center.

If our records show your dealership has ordered any vehicle(s) involved in campaign number FL834, a list of the customers and vehicle identification numbers will be available on DTNAConnect. Please refer to this list when ordering parts for this recall.

Table 1 – Replacement Parts for FL834

Campaign Number Part Description Part Number Qty.
FL834A CLIP-REINF,DOOR,SLEEPER 18-73497-000 6 ea
SCREW-SLFDLG,SST,PNH,8-18X5/8 23-14673-705
FL834B CLIP-REINF,DOOR,SLEEPER 18-73497-000 4 ea
SCREW-SLFDLG,SST,PNH,8-18X5/8 23-14673-705
FL834C CLIP-REINF,DOOR,SLEEPER 18-73497-000 8 ea
SCREW-SLFDLG,SST,PNH,8-18X5/8 23-14673-705
FL834D SCREW-SLFDLG,SST,PNH,8-18X5/8 23-14673-705 6 ea
FL834E SCREW-SLFDLG,SST,PNH,8-18X5/8 23-14673-705 4 ea
FL834F SCREW-SLFDLG,SST,PNH,8-18X5/8 23-14673-705 8 ea
FL834A-F BLANK COMPLETION STICKER WAR260 1 ea

 

Table 1

 

Removed Parts

U.S. and Canadian Dealers, please follow Warranty Failed Parts Tracking shipping instructions for the disposition of all removed parts. Export distributors, please destroy removed parts unless otherwise advised.

 

Labor Allowance

Table 2 – Labor Allowance

Campaign Number Procedure Time Allowed (hours) SRT Code Corrective Action
FL834A Install clip, hinge support for 2 baggage doors and 1 sleeper door 1.5 996-R104B 12-Repair Recall/Campaign
FL834B Install clip, hinge support for 2 baggage doors 0.9 996-R104A
FL834C Install clip, hinge support for 2 baggage doors and 2 sleeper doors 2.2 996-R104C
FL834D Replace tapping screws used in interim repair for 2 baggage doors and 1 sleeper door 0.9 996-R104E
FL834E Replace tapping screws used in interim repair for 2 baggage doors 0.5 996-R104D
FL834F Replace tapping screws used in interim repair for 2 baggage doors and 2 sleeper doors 1.3 996-R104F

 

Table 2

 

IMPORTANT: When the Recall has been completed, locate the base completion label in the appropriate location on the vehicle, and attach the red completion sticker provided in the recall kit (Form WAR260). If the vehicle does not have a base completion label, clean a spot on the appropriate location of the vehicle and first attach the base completion label (Form WAR259). If a recall kit is not required or there is no completion sticker in the kit, write the recall number on a blank sticker and attach it to the base completion label.

 

Claims for Credit

You will be reimbursed for your parts, labor, and handling (landed cost for Export Distributors) by submitting your claim through the Warranty system within 30 days of completing this campaign. Please reference the following information in OWL:

  • Claim type is Recall Campaign.
  • In the Campaign field, enter the campaign number and appropriate condition code (e.g. FL834-A, FL834-B, etc.).
  • In the Primary Failed Part Number field, enter 25-FL834-000.
  • In the Parts field, enter the appropriate kit or part number(s) as shown in the Replacement Parts Table.
  • In the Labor field, first enter the appropriate SRT from the Labor Allowance Table. Administrative time will be included automatically as SRT 939-6010A for 0.3 hours.
  • The VMRS Component Code is F99-999-005 and the Cause Code is A1 – Campaign.
  • U.S. and Canada — Reimbursement for Prior Repairs. When a customer asks about reimbursement, please do the following:
  • Accept the documentation of the previous repair.
  • Make a brief check of the customer’s paperwork to see if the repair may be eligible for reimbursement. (See the “Copy of Owner Letter” section of this bulletin for reimbursement guidelines.)
  • Submit an OWL Recall Pre-Approval Request for a decision.
  • Include the approved amount on your claim in the Other Charges section.
  • Attach the documentation to the pre-approval request.
  • If approved, submit a based on claim for the pre-approval.
  • Reimburse the customer the appropriate amount.

IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the campaign has not been previously completed. Also, check for a completion sticker prior to beginning work.

U.S. and Canadian dealers, contact the Warranty Campaigns Department via Web inquiry at

DTNAConnect.com / WSC, if you have any questions or need additional information. Export distributors, submit a Web inquiry or contact your International Service Manager.

U.S. and Canadian Dealers: To return excess kit inventory related to this campaign, U.S. dealers must submit a Parts Authorization Return (PAR) to the Memphis PDC. Canadian dealers must submit a PAR to their facing PDC. All kits must be in resalable condition. PAR requests must include the original purchase invoice number. Export Distributors: Excess inventory is not returnable.

The letter notifying U.S. and Canadian vehicle owners is included for your reference.

Please note that the National Traffic and Motor Vehicle Safety Act, as amended (Title 49, United States Code, Chapter 301), requires the owner’s vehicle(s) be corrected within a reasonable time after parts are available to you. The Act states that failure to repair a vehicle within 60 days after tender for repair shall be prima facie evidence of an unreasonable time. However, circumstances of a particular situation may reduce the 60 day period. Failure to repair a vehicle within a reasonable time can result in either the obligation to (a) replace the vehicle with an identical or reasonably equivalent vehicle, without charge, or (b) refund the purchase price in full, less a reasonable allowance for depreciation. The Act further prohibits dealers from selling a vehicle unless all outstanding recalls are performed. Any lessor is required to send a copy of the recall notification to the lessee within 10 days. Any subsequent stage manufacturer is required to forward this notice to its distributors and retail outlets within five working days.

 

Copy of Notice to Owners

Subject: Western Star Baggage and Sleeper Doors

For the Notice to U.S. Customers: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. For the Notice to Canadian Customers: This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.

Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Western Star Truck Sales,

Inc., has decided that a defect that relates to motor vehicle safety exists on specific Model Years 2017-2020 Western Star 4900 and 5700 model vehicles manufactured November 14, 2016, through September 12, 2019, and equipped with certain baggage and sleeper doors.

On certain vehicles, the baggage and sleeper doors may separate from the hinge assembly. A baggage or sleeper door separating from the vehicle whilst in motion could lead to debris on the road increasing the risk of an injury and/or crash.

For the final repair, reinforcement clips/hinges with mechanical fasteners and stronger gauge screws will be installed on each baggage and sleeper door hinge.

NOTE: All vehicles that had the INT FL834 interim repair preformed still require the stronger gauge screws in the final repair.

Please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, go to www.Daimler-TrucksNorthAmerica.com. On the menu tab, select “Contact,” scroll down to “Find a Dealer,” and select the appropriate brand. The Recall will take approximately one to three hours, depending on the repair, and will be performed at no charge to you. You may also confirm your vehicle’s involvement in this recall at this URL: https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage.

You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification.

If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.

If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712,

7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address

DTNA.Warranty.Campaigns@Daimler.com. For other concerns, you may contact the Customer Assistance Center at (800) 385-4357. For the Notice to U.S. Customers: If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the

Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to https://www.safercar.gov. For the Notice to Canadian Customers: If you have a safety concern relating to this Recall, you may wish to contact Transport Canada – Motor Vehicle Safety at, 80 rue Noel, Gatineau, Quebec J8Z 0A1 or phone (800) 333-0510.

We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.

WARRANTY CAMPAIGNS DEPARTMENT

Enclosure

 

Reimbursement to Customers for Repairs Performed Prior to Recall

If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.

Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement.

Please provide original or clear copies of all receipts, invoices, and repair orders that show:

  • The name and address of the person who paid for the repair
  • The Vehicle Identification Number (VIN) of the vehicle that was repaired
  • What problem occurred, what repair was done, when the repair was done
  • Who repaired the vehicle
  • The total cost of the repair expense that is being claimed
  • Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt) Reimbursement will be made by check from your Daimler Trucks North America LLC dealer.

Please speak with your Daimler Trucks North America LLC authorized dealer concerning this matter.

 

Work Instructions

Subject: Western Star Baggage and Sleeper Doors

Models Affected: Specific Model Years 2017-2020 Western Star 4900 and 5700 model vehicles manufactured November 14, 2016, through September 12, 2019, and equipped with certain baggage and sleeper doors.

NOTE: Vehicles in FL834A-C did NOT have INT FL834 performed; proceed with the Baggage and Sleeper Door Hinge Reinforcement below.

Vehicles in FL834D-F had the INT FL834 performed; go to Door Hinge Screw Replacement on page 8.

 

Baggage and Sleeper Door Hinge Reinforcement (FL834A,B, and C)

IMPORTANT: Perform this procedure on all baggage and sleeper doors on the vehicle. Trimming material from the door flange and from the hinge will be required to provide clearance for the new clips and fasteners.

NOTE: An FL834 completion sticker may not be a good indication that the final repair has been completed, as some dealers may have installed a sticker during the INT FL834 interim repair.

  1. Check the Coverage Info screen in OWL for an FL834 “final” repair claim indicating this work has been done. If a claim is present, no work is needed. If there is no claim, proceed with the next step.
  2. Park the vehicle on a flat surface, set the parking brake, shut down the engine. Chock the tires.
  3. Open and remove the baggage or sleeper door.
    • For sleeper door removal instructions refer to Section 72.02, Subject 100 in the Western Star Workshop Manual.
    • For baggage door removal instructions refer to Section 72.01, Subject 110 in the Western Star Workshop Manual.
  4. Using tape, mask off the portions of the door flange and hinge that will be marked and trimmed.

NOTE: The trimmed out notch only needs to be large enough for the screw head to pass through.

  1. Mark out the areas of the door flange to be trimmed to allow tool access for a #8 self tapping screw. See Fig. 1, ref. A.
    • Holding the bracket in place, mark the outer flange using the fastener hole in the bracket as a guide.

This mark will be the centerline of the tool access notch.

  1. Notch the door flange surface. See Fig. 2.
    • Using a rotary tool, cut a 10mm circular notch in the flange, extending the notch halfway down the flange.

NOTE: The farther the notch is extended into the flange the more noticeable it will be once the door is reinstalled onto the vehicle.

  • Check for fastener installation clearance. If needed, extend the notch further.

 

  1. Mark out the areas of the door hinge that will need to be trimmed to allow clearance for the new clip. See Fig. 3, ref. A.
  2. Trim the door hinge as shown in Fig. 3. Trimming past the bend in the hinge to allow full range of motion.

 

  1. Install the new clips to the top and bottom of the hinge using #8 self tapping screws and tighten the screws to 10 lb·in (113 N·cm) and not to exceed 2500 rpm. See Fig. 4 and Fig. 5

 

  1. Touch up trimmed edges with paint in the closest matching color available and allow to dry.
  2. Install the door onto the vehicle.
    • For sleeper door installation instructions refer to Section 72.02, Subject 100 in the Western Star Workshop Manual.
    • For baggage door installation instructions refer to Section 72.01, Subject 110 in the Western Star Workshop Manual.
  3. Clean a spot on the base label (Form WAR259). Write the campaign number FL834 on a blank red completion sticker (Form WAR260). Attach the sticker to the base label to indicate the work has been completed.

 

Door Hinge Screw Replacement (FL834D, E, and F)

IMPORTANT: Perform this procedure on vehicles that had the INT FL834 repair completed. The produce details the swapping out of new screws for the self-tapping screws used in the interim recall.

NOTE: An FL834 completion sticker may not be a good indication that the final repair has been completed as some dealers may have installed a sticker during the INT FL834 interim repair.

  1. Check the Coverage Info screen in OWL for an FL834 “final” repair claim indicating this work has been done. If a claim is present, no work is needed. If there is no claim, proceed with the next step.
  2. Park the vehicle on a flat surface, set the parking brake, shut down the engine. Chock the tires.
  3. Open and remove the baggage or sleeper doors.
    • For sleeper door removal instructions refer to Section 72.02, Subject 100 in the Western Star Workshop Manual.
    • For baggage door removal instructions refer to Section 72.01, Subject 110 in the Western Star Workshop Manual.
  4. On each door, remove the screw installed during the interim recall. See Fig. 5.

 

  1. On each door, install the new screw (part number 23-14673-705), tightening it to 10 lb·in (113 N·cm).
  2. Install each door onto the vehicle.
    • For sleeper door installation instructions refer to Section 72.02, Subject 100 in the Western Star Workshop Manual.
    • For baggage door installation instructions refer to Section 72.01, Subject 110 in the Western Star Workshop Manual.
  3. Clean a spot on the base label (Form WAR259). Write the campaign number FL834 on a blank red completion sticker (Form WAR260). Attach the sticker to the base label to indicate the work has been completed.

 

Daimler Trucks
North America LLC

 

September 2020
FL834A-F
NHTSA #19V-722

 

IMPORTANT SAFETY RECALL

See enclosed VIN list

Subject: Western Star Baggage and Sleeper Doors

 

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

 

Daimler Trucks North America LLC, on behalf of its Freightliner Trucks Division, and wholly owned subsidiaries, Western

Star Truck Sales, Inc, has decided that a defect which relates to motor vehicle safety exists on specific Model Year 20172020 Western Star 4900 and 5700 model vehicles manufactured November 14, 2016, through September 12, 2019, and equipped with certain baggage and sleeper doors.

 

On certain vehicles, the baggage and sleeper doors may separate from the hinge assembly. A baggage or sleeper door separating from the vehicle whilst in motion could lead to debris on the road increasing the risk of an injury and/or crash.

 

For the final repair, reinforcement clips/hinges with mechanical fasteners and stronger gauge screws will be installed on each baggage and sleeper door hinge.  NOTE: All vehicles that had the INT FL834 interim repair preformed still require the stronger gauge screws in the Final repair.

 

Please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at www.Daimler-TrucksNorth America.com / Contact (scroll to the bottom) / Locate a Dealer (scroll to the bottom). The Recall will take approximately one to three hours, depending on the repair, and will be performed at no charge to you. You may also confirm your vehicle’s involvement in this recall at this URL: https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vinmodule/getVinLookupPage.

 

You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification.

 

If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details.

 

If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimler.com. For other concerns, you may contact the Customer Assistance Center at (800) 385-4357. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590; or call the Vehicle Safety Hotline at  (888) 327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov.

 

We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.

 

 

WARRANTY CAMPAIGNS DEPARTMENT

Enclosure

 

Reimbursement to Customers for Repairs Performed Prior to Recall

 

If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.

 

Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement.

 

Please provide original or clear copies of all receipts, invoices, and repair orders that show:

 

  • The name and address of the person who paid for the repair.

 

  • The Vehicle Identification Number (VIN) of the vehicle that was repaired.

 

  • What problem occurred, what repair was done, when the repair was done.

 

  • Who repaired the vehicle.

 

  • The total cost of the repair expense that is being claimed.

 

  • Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt).

 

Reimbursement will be made by check from your Daimler Trucks North America LLC dealer.

 

Please speak with your Daimler Trucks North America LLC authorized dealer concerning this matter

 

Daimler Trucks
North America LLC

 

December 2019
FL834
Interim Recall Notice NHTSA #19V-722

 

IMPORTANT SAFETY RECALL

See enclosed VIN list

Subject: Western Star Baggage and Sleeper Doors

 

This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.

 

Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Western Star Truck Sales, Inc., has decided that a defect which relates to motor vehicle safety exists on specific Model Years 2017-2020 Western Star 4900 and 5700 vehicles manufactured November 14, 2016, through September 12, 2019, and equipped with baggage doors and sleeper doors.

 

On certain vehicles, the baggage and sleeper doors may separate from the hinge assembly. A baggage or sleeper door separating from the vehicle whilst in motion could lead to debris on the road increasing the risk of an injury.

 

The final repair is being validated. In the interim, two reinforcement clips with mechanical fasteners will be installed on each baggage and sleeper door hinge. Repairs will be performed by Daimler Trucks North America authorized service facilities. Please contact an authorized Daimler Trucks North America dealer to arrange to have this repair performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at www.DaimlerTrucksNorth America.com / Contact (scroll to the bottom) / Locate a Dealer (scroll to the bottom). The repair will take approximately one and a half hours and will be performed at no charge to you. You may also confirm your vehicle’s involvement in this recall at this URL: https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vinmodule/getVinLookupPage.

 

A second notice will inform you when the final remedy is available. When you receive the second notice, please contact your authorized Daimler Trucks North America dealer to schedule the Recall for your vehicle. All vehicles that have the interim repair performed will also require the final repair.

 

If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days.

 

If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimler.com. For other concerns, you may contact the Customer Assistance Center at (800) 385-4357. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590; or call the Vehicle Safety Hotline at  (888) 327-4236 (TTY: 800-424-9153); or go to https://www.safercar.gov.

 

We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety.

 

WARRANTY CAMPAIGNS DEPARTMENT

Enclosure

 

 

8 Affected Products

Vehicles

MAKE MODEL YEAR
WESTERN STAR 4900 2017-2020
WESTERN STAR 5700 2017-2020

 

14 Associated Documents

ISSUED Interim Owner Notification Letter(Part 577)

RIONL-19V722-7907.pdf 49.123KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [47.97 KB]

 

Miscellaneous Document- Amended 573 Report

RMISC-19V722-0721.pdf 444.237KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [433.83 KB]

 

Recall 573 Report- Amendment 2

RCLRPT-19V722-3895.PDF 213.544KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.54 KB]

 

Remedy Instructions and TSB

RCRIT-19V722-8352.pdf 180.189KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [175.97 KB]

 

Manufacturer Notices(to Dealers,etc)

RCMN-19V722-5371.pdf 103.774KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [101.34 KB]

 

Remedy Instructions and TSB

RCRIT-19V722-0914.pdf 181.36KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [177.11 KB]

 

Manufacturer Notices(to Dealers,etc)

RCMN-19V722-7689.pdf 65.628KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [64.09 KB]

 

Miscellaneous Document- 573 Defect Information Report

RMISC-19V722-9417.pdf 420.715KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [410.85 KB]

 

Recall Acknowledgement

RCAK-19V722-3030.pdf 244.727KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [238.99 KB]

 

Defect Notice 573 Report

RCLRPT-19V722-4975.PDF 212.883KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [207.89 KB]

 

Miscellaneous Document- 573 Defect Information Report

RMISC-19V722-9822.pdf 391.569KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [382.39 KB]

 

Remedy Instructions and TSB

RCRIT-19V722-2853.pdf 178.212KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [174.04 KB]

 

ISSUED Owner Notification Letter(Part 577)

RCONL-19V722-3156.pdf 108.323KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [105.78 KB]

 

Remedy Instructions and TSB

RCRIT-19V722-9679.pdf 184.781KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [180.45 KB]

 

Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V722&docType=RCL

 

 

“This site contains affiliate links for which OEMDTC may be compensated”
SaleBestseller No. 1
WD-40 Specialist White Lithium Grease Spray with SMART STRAW SPRAYS 2 WAYS, 10 OZ
WD-40 Specialist White Lithium Grease Spray with SMART STRAW SPRAYS 2 WAYS, 10 OZ
  • Ideal for metal-to-metal applications that require heavy-duty lubrication and protection against rust and corrosion
  • Sprays on evenly as a liquid and sets dry with a thick, protective coating that won't run off. Safe from 0° F to 300° F for unbeatable protection
  • Perfect for auto hinges, gears, sprockets, latches, door tracks, pulleys, cables, and more
  • Excellent for lubricating equipment before placing in storage, and is 50-state VOC compliant
  • WD-40 Brand believes in creating high-quality products that will not fail in extreme conditions. Professionals rely on WD-40 Specialist to get the job done right
$8.49 −$1.51 $6.98 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 2
B'laster 16-LG High-Performance White Lithium Grease - 11-Ounces
B'laster 16-LG High-Performance White Lithium Grease - 11-Ounces
  • Keep Surfaces Lubricated in Extreme Temperatures
  • Protects Against Moisture and Oxidation
  • Leaves a Thick Layer of Grease
$6.98 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 3
WD-40 Specialist White Lithium Grease Spray with SMART STRAW SPRAYS 2 WAYS, 10 OZ [6-Pack]
WD-40 Specialist White Lithium Grease Spray with SMART STRAW SPRAYS 2 WAYS, 10 OZ [6-Pack]
  • Ideal for metal-to-metal applications that require heavy-duty lubrication and protection against rust and corrosion
  • Sprays on evenly as a liquid and sets dry with a thick, protective coating that won't run off. Safe from 0° F to 300° F for unbeatable protection
  • Perfect for auto hinges, gears, sprockets, latches, door tracks, pulleys, cables, and more
  • Excellent for lubricating equipment before placing in storage, and is 50-state VOC compliant
  • WD-40 Brand believes in creating high-quality products that will not fail in extreme conditions. Professionals rely on WD-40 Specialist to get the job done right
$48.39 −$3.90 $44.49 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 4
CRC 5037 White Lithium Grease - 10 Wt Oz.
CRC 5037 White Lithium Grease - 10 Wt Oz.
  • MULTI-PURPOSE: Ideal for many applications in automotive; shop; and home
  • LONG LASTING: Lithium-based grease delivers corrosion protection and a long grease life
  • UNIQUE FORMULA: This spray lubricant is water-resistant; heat resistant; and contains advanced additives to deliver high film strength
  • APPLICATIONS: Hinges; latches; overhead door tracks; open gears; chains; cables; slide conveyors; guide rails; cams; pistons; machinery; tools; & equipment
  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain; protect and repair different marine; heavy-duty motor vehicles; industrial-grade engines; household tools and electrical equipment.
$8.28 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
SaleBestseller No. 5
B'laster 16-LG High-Performance White Lithium Grease Pack of 3 (3)
B'laster 16-LG High-Performance White Lithium Grease Pack of 3 (3)
  • Protects Against Moisture and Oxidation
  • Leaves a Thick Layer of Grease
  • Keep Surfaces Lubricated in Extreme Temperatures
$24.03 −$4.03 $20.00
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 6
DuPont Teflon White Lithium Grease Aerosol Spray, 10 Oz.
DuPont Teflon White Lithium Grease Aerosol Spray, 10 Oz.
  • Clean, low-odor lithium complex formula
  • Enhanced with Teflon for optimal performance
  • Resists washing off, melting, freezing and extreme heat
  • Appropriate for outdoor use
$13.40 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 7
Johnsen's 4604-12PK White Lithium Grease - 11 oz., (Pack of 12)
Johnsen's 4604-12PK White Lithium Grease - 11 oz., (Pack of 12)
  • All-purpose lubricant that protects against rust and makes surfaces friction resistant
  • Withstands moisture, freezing and high heat
  • For use on various automobile parts, process equipment and hand tools as well as many items in the home.
$48.55 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 8
WD-40 Specialist Protective White Lithium Grease Spray with SMART STRAW SPRAYS 2 WAYS, 10 OZ [2- Pack]
WD-40 Specialist Protective White Lithium Grease Spray with SMART STRAW SPRAYS 2 WAYS, 10 OZ [2- Pack]
  • Ideal for metal-to-metal applications that require heavy-duty lubrication and protection against rust and corrosion
  • Sprays on evenly as a liquid and sets dry for a thick, protective coating that won't run off. Safe from 0° F to 300° F for unbeatable protection
  • Sprays on easily with a thick, protective coating for auto hinges, gears, sprockets, latches, door tracks, pulleys, cables, and more
  • Excellent for lubricating equipment before placing in storage, and is 50-state VOC compliant
  • WD-40 Company has been around for 65 years and has never stopped their innovative mindset. The WD-40 Specialist product line has been refined to perfection so you get the results you need with ease
$20.98 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 9
CRC White Lithium Grease 03080 – 10 Wt. Oz. Aerosol, High Viscosity General Purpose Grease
CRC White Lithium Grease 03080 – 10 Wt. Oz. Aerosol, High Viscosity General Purpose Grease
  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools, and electrical equipment
  • WHITE LITHIUM GREASE: This great provides superior lubrication and durability in any weather or temperature. Perfect for use as a general purpose lubricant and corrosion inhibitor for tools, machiner, and equipment.
  • DURABLE FORMULA: This 50 state compliant grease creates a tough, high viscosity film, and features excellent heat and water resistance.
  • APPLICATIONS: Great for use on hinges, locks, overhead door tracks, open gears, chains, cables, slide conveyors, guide rails, cams, pistons, machinery, tools, and equipment.
  • PRODUCT SPECIFICATIONS: White Lithium Grease is available in a 10 wt oz. aerosol can.
$20.70 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping
Bestseller No. 10
White Lithium Aerosol Spray Grease | Garage Door Lubricant | Automotive Greases & Lubricants | Grease for Door Hinge | Eliptical Grease | Trailer | Hitch Ball Lubricant | NLGI 2
White Lithium Aerosol Spray Grease | Garage Door Lubricant | Automotive Greases & Lubricants | Grease for Door Hinge | Eliptical Grease | Trailer | Hitch Ball Lubricant | NLGI 2
  • WhiteLith Is An Lithium Thickened Light Duty Grease That Prevents Rust And Corrosion
  • An Excellent Choice Anywhere A Non-Staining General EP Grease Is Required
  • Useful For Greasing Automotive Doors, Bicycle Parts, Household Doors, Garage Doors & Overhead Tracks
  • Additional Applications Of Water Pumps, Universal Joints And Chassis Points, Cars, Farm Tractors, Construction Equipment And Trucks
  • A Great Solution To Fix a Squeak In Door Hinges, Latches and Most Motorcycle Springs, Tools And Much More!
$15.99 Amazon Prime
Buy on Amazon Price incl. tax, excl. shipping

Last update on 2024-04-16 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

BufferCopyFlipboardHacker NewsLinkedInMessengerMixPinterestPocketPrintRedditSMSTelegramTumblrVKWhatsAppLineXing

Leave a Comment

Share to...
BufferCopyFlipboardHacker NewsLineLinkedInMessengerMixPinterestPocketPrintRedditSMSTelegramTumblrVKWhatsAppXing