| “This site contains affiliate links for which OEMDTC may be compensated” |
October 9, 2019 NHTSA CAMPAIGN NUMBER: 19V717000
Delay In Seatbelt-Unfastened Telltale/FMVSS 208
Without the seatbelt warning reminder, the driver may forget to fasten the seatbelt, increasing the risk of injury in the event of a crash.
NHTSA Campaign Number: 19V717
Manufacturer Daimler Trucks North America LLC
Components SEAT BELTS, ELECTRICAL SYSTEM
Potential Number of Units Affected 1,045
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2020 Thomas Built Buses Minotour school buses. The seatbelt-unfastened warning light will not illuminate for approximately five seconds after the ignition is moved to the “on” or “start” position. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, “Occupant Crash Protection.”
Remedy
GM has notified the Thomas Built owners, and GM dealers will reprogram the instrument panel cluster, free of charge. The recall began October 3, 2019. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-833.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
IMPORTANT SAFETY RECALL
October 2019
<CustomerName>
<CustomerAddress>
This notice applies to your vehicle, VIN: <VIN>.
Dear <CustomerName>:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
General Motors has decided that certain 2019 model year Chevrolet Express and GMC Savana vehicles may fail to conform to S7.3 of Federal Motor Vehicle Safety Standard (FMVSS) 208, Occupant crash protection. As a result, GM is conducting a recall. We apologize for this inconvenience. However, we are concerned about your safety and continued satisfaction with our products.
|
I M P O R T A N T
|
| Why is your vehicle being recalled? | In these vehicles, the seatbelt-unfastened telltale will not illuminate for approximately five seconds after the ignition is moved to the on or start position. There is no impact to the vehicle’s seatbelt systems, and the telltale will function normally after the five-second delay. A software change implemented for 2019 model year Chevrolet Express and GMC Savana vehicles contains an error that inhibits the activation of the telltale for five seconds after vehicle startup. During the five-second delay, the telltale will not alert the driver that the driver’s seatbelt is unbuckled, increasing the risk of the driver forgetting to buckle the seatbelt and the risk of injury in a crash. |
| What will we do? | Your <DIV_DLR> dealer will reprogram the instrument panel cluster (IPC). This service will be performed for you at no charge.
Because of service scheduling requirements, it is likely that your dealer will need your vehicle longer than the actual inspection and service correction time of approximately 35 minutes. |
| What should you do? | You should contact your <DIV_DLR> dealer to arrange a service appointment as soon as possible. |
| Do you have questions? | If you have questions or concerns that your dealer is unable to resolve, please contact the <VINDivisionName>Customer Assistance Center at <DivCACPhone>. |
If after contacting your dealer and the Customer Assistance Center, you are still not satisfied we have done our best to remedy this condition without charge and within a reasonable time, you may wish to write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1.888.327.4236 (TTY 1.800.424.9153), or go to https://www.safercar.gov. The National Highway Traffic Safety Administration Campaign ID Number for this recall is 19V644.
Federal regulation requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
<Combs_closing>
GM Recall: N192264500
SEOCONTENT-START
DAIMLER __ ~:_-~~ · _
– – -~-;:-;;:r
• – ;J_- _;.-. – –=–
Defect Information Report
(Section 573.6)
FL-833
Date of Submission: October 9, 2019
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: 0 Safety Defect
Vehicle Information
Model Yr. Start: 2020
Make: Thomas Built Buses
Model: Minotaur
Production Dates: Begin: 09/24/2018
End: 06/17/2019
X Non-Compliance
Model Yr. End: 2020
Descriptive Informat ion: Cert~in school buses manufactured with a GMC Savannah or Chevrolet
Express Chassis cab built within the referenced above dates that may contain software defined in
General Motors (GM) vehicle recall 19V-644.
Number potentially involved: 1045 Estimated percentage of involve with defect: 100%
Defect/ Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance:
Per GM recall 16V-644, GM identified vehicles that may fail to conform to FMVSS 208, occupant crash
protection. GM states in these vehicles “the seatbelt-unfastened telltale will not illuminate for
approximately five seconds after the ignition is moved to the on or start position. There is no impact to
the vehicle’s seatbelt or airbag systems, and the telltales will function normally after the five-second
delay.”
If a noncompliance, provide the applicable FMVSS: FMVSS 208
Describe the safety risk:
Per GM recall 19V-644: “During the five-second delay, the telltale will not alert the driver that the
driver’s seatbelt is unbuckled or complete the airbag indicator readiness bulb check. There is no delay in
the activation of seat belt warning chimes.”
If applicable, identify the manufacture of the defective or noncom pliant component.
Per GM recall 19V-644: Aptiv Avenida Fomento Industrial S/N
Chronology of Defect / Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the
noncompliance decision.:
Early September 2019, GM filed a defect report of noncompliance to CMVSS 208. GM notified Thomas
Built Buses {TBB) of the recall and provided a VIN list of chassis cabs that were at TBB, TBB placed a hold
on the identified VINs per GMs instructions. DTNA requested information regarding the filing and
requested further information to determine if additional DTNA vehicles are affected. DTNA opened an
investigation to determine potential field exposure. Early October 2019, DTNA was provided a full list of
affected VINs supplied to TBB. October 3rd, 2019 DTNA with an abundance of caution, decided to
conduct a voluntary non-compliance recall on the GM identified vehicles.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for
reimbursement.
GM dealers will reprogram the instrumented panel cluster (/PC). Repairs will be performed by GM
authorized service facilities. Customer notification will be done by first class mail using GM records to
determine the customers affected.
Identify the Recall Schedule
Describe the recall schedule for notifications.:
General Motors to provide Customer notification and will be made using GM records to determine the
customers affected. – DTNA will not be mailing out any owner notification.
Planned Dealer Notification Begin Date:
Planned Dealer Notification End Date:
Planned Owner Notification Begin Date:
Planned Owner Notification End Date:
12/07/2019
12/07/2019
12/07/2019
12/07/2019
Manufacture’s identification code for this recall (if applicable): FL-833
DTNA Representative;
Andy Jones
Manager
Compliance and Regulatory Affairs
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| THOMAS BUILT BUSES | MINOTOUR | 2020 |
9 Associated Documents
Recall Acknowledgement
RCAK-19V717-6933.pdf 244.722KB
Loading...
Reload document 
Open in new tab
Non-Compliance Notice 573 Report
RCLRPT-19V717-7009.PDF 213.052KB
Loading...
Owner Notification Letter(Part 577)
RCONL-19V717-2735.pdf 424.925KB
Loading...
Recall 573 Report- Amendment 3
RCLRPT-19V717-7236.PDF 213.094KB
Loading...
Miscellaneous Document- 573 Defect Information Report
RMISC-19V717-2705.pdf 472.147KB
Loading...
Recall 573 Report- Amendment 2
RCLRPT-19V717-1192.PDF 213.047KB
Loading...
Recall Quarterly Report #2, 2020-1
RCLQRT-19V717-0541.PDF 211.252KB
Loading...
Recall Quarterly Report #1, 2019-4
RCLQRT-19V717-4758.PDF 211.152KB
Loading...
Recall Quarterly Report #3, 2020-2
RCLQRT-19V717-2736.PDF 211.333KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V717&docType=RCL
GM Reprogramming
GM Diagnostic/Programming (TIS2Web)
Approved J2534 Device with TIS2WEB can reprogram 1996 and later All GM Modules.
To obtain the latest electronic controller calibration information for your vehicle, go to https://tis2web.service.gm.com/tis2web and enter the vehicle's 17 character Vehicle Identification Number (VIN) and select 'Get CAL ID’.
You can then compare the latest part number with the actual number installed on the vehicle to determine if a reprogram is needed.
The Service Programming System (SPS) application is part of the TIS2Web system. To program an ECU, the SPS application must communicate with the vehicle control modules using the proper J2534 programming interface tool.
The following are the supported interface tools:
The Tech 2 supports model years 1996 and beyond. With the addition of the CAN Diagnostic Interface (CANdi) module, Tech 2 is fully backward compatible with current Tech 2 functionality and operates transparently when diagnosing non-CAN-equipped vehicles.
Servicing the next generation Global A vehicles will require the diagnostic software, GDS2, Global Diagnostic System 2 running on a local PC device while the MDI is connected to the vehicle. The GM MDI is the Global Diagnostic tool for future vehicles starting with Global A vehicles.
The GM MDI was introduced in the fall of 2007 for Pass-Thru programming and offers faster programming speed. It can be used to perform Pass-Thru programming on all vehicles built since 1996 and into the future. Click here to view a list of GDS supported vehicles.
- 【As a multi-protocol Pass-Thru vehicle interface】MaxiFlash Elite is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device. Specially designed to provide users with convenient PC communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, MaxiFlash Elite offers the most significant features desired by OEM customers: reliability, fast performance and flexibility.
- 【MaxiFlash Elite is an accessory tool for MK908P, MS908S Pro】Autel MaxiSys Elite to program ECUs on specific for BMW and for Benz vehicles, in case you lost the J-2534 programmer. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. The functions are NOT universally compatible. Please send VIN number to 🚘jmxd2022@outlook.com📧🚘 to check compatibility before your order. If need any supports, Please contact us.
- 【Wireless with advanced networking functions】Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable. Autel MaxiFlash Elite is compatiable with MaxiSYS MS908S, MaxiSYS MS908S Pro , MaxiSYS MS908CV, MaxiCOM MK908, MaxiCOM MK908 Pro, MaxiSYS Elite, MaxiSYS Elite II and Personal Computer
- 【SAE J2534-1 & J2534-2 Standards】Autel MaxiFlash Elite J2534 is a fully compliant SAE J2534-1 & SAE J2534-2 (March 2006) device, which performs standard PassThru J2534 functionality: Compatible with for Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. Autel MaxiFlash J2534 is also specially designed to provide users with P-C communication and ECU reprogramming capabilities on any modern vehicle diagnostic bus, reliability and flexibility.
- 【Supports simultaneous communication Definition in J2534-1】Autel MaxiFlash Elite Reprogramming Device J2534 supports simultaneous communication definition in J2534-1, running 3 protocols at the same time, which greatly improves reprogramming and diagnostic speed. Embedded with the ARM9 Dual-core processor (clocked up to 500MHz), which further boosts the communicating speed.Rugged aluminum case with non-slip rubber end caps, capable of withstanding harsh environment.
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
- Industry-leading J2534 Pass-Thru Technology: Enabling diagnostics, reprogramming and security functions for dealerships and the independent repair facility. Economical and compact pass-thru devices provides an easy-to-use interface that allows you to repair complex vehicles with OE applications in your shop. Each type (see single branded types above) Mongoose-Plus is engineered to work with one of the following OEM's J2534 applications for Chrysler, Ford, GM, Nissan, Toyota, Subaru, & VW/Audi.
- Supports Current GM Vehicles: Now includes CAN-FD, DoIP (Diagnostics over Internet Protocol - as defined in J2534-2) and support for J2534 version 5.0. This is the tool that GM dealerships use for diagnostics and reprogramming.
- NEW Bluetooth Wireless Options Available: Providing wireless connectivity between your laptop and the Mongoose-Plus
- Expert Product Support: Staffed by technicians who understand vehicle repair and J2534 Pass‑Thru applications to help you with any technical setup questions
- Key Registration and Immobilizer Support: Using NASTF Vehicle Security Professional credentials
- Stay up-to-date with thelatest firmware and support of the SM2Pro J2534VCI ECUs programmer, ensuring reliable perform and optimalresults.
- The SM2Pro J2534VCI ECUs programmer is a trustedtool for professional technicians, offering comprehensive functionality and easy integration into your workflows.
- The SM2Pro J2534VCI ECUs programmer offersadvanced functionality for efficient and precise ECUs programming.
- With its 67IN1 without dongle & OBDcompatibility, the SM2Pro J2534VCI ECUs programmer provides a versatilesolution for read and write operations.
- Experienceseamless ECUs programming with the SM2Pro J2534VCI, designed to streamlines the read and write processes for enhanced efficiency.
- 【ALL-IN-1 REPROGRAMMING TOOL】With its exceptional compatibility, TOPDON RLink Lite J2534 pass-thru programmer and enhanced VCI seamlessly conducts original equipment-level diagnostics, programming, and coding jobs, achieving OE-level diagnostics across various vehicle models with a single device. Note: TOPDON RLink Lite is Window-only, not compatible with Mac.
- 【J2534 REPROGRAMMING TOOL】The RLink Lite functions as a J2534 pass-thru programmer to achieve OEM programming and diagnostics. Compliant with three major automotive industry standards D-PDU/J2534/RP1210, and latest DoIP/CAN/CAN FD, the RLink Lite ensures extensive vehicle coverage and speedy diagnostics.
- 【ENHANCED VCI】The TOPDON RLink Lite operates as a versatile VCI box, enabling you to achieve advanced diagnostic, programming, and coding functionalities when paired with OE software. Moreover, TOPDON's DMS Driver Management System helps you easily master the OE software by offering drivers for various brands.
- 【FASTER & SMOOTHER】Powered by a 1.8 GHz quad-core processor, enjoy swift response and seamless operation. The RLink Lite Enhanced VCI runs on Android 11.0 for advanced features and top-notch security. With 2GB RAM and 32GB ROM, storage is ample for smooth performance and quick access to data and apps.
- 【PACKAGE+J2534 SUPPORT】The package comprises the RLink Lite main unit, a 2m OBDII diagnostic cable, a 5m Ethernet cable, a 1.5m USB 2.0 data cable, a 12V DC power adapter, and a quick start guide. Enjoy complimentary technical support from our dedicated TOPDON team for any J2534-related inquiries or concerns throughout the lifespan of your device.
- 【Autel MaxiFlash VCI】👉The MaxiFlash VCI is a bluetooth-enabled vehicle communication interface (VCI) and a J2534-1 and J2534-2 compliant pass-thru programming device. Compatible with the MaxiSYS MS909 advanced diagnostics tablet. The MaxiFlash VCI supports CAN FD, 4 CAN Channels, D-PDU, ISO22900-1 & ISO 22900-2 protocols and is RP1210 compliant.
- 【Programming Compatibility】👉The MaxiFlash VCI is a D-PDU, SAE J2534 & RP1210 compliant PassThru programming interface. Using the updated OEM software, it is capable of replacing the existing software/firmware in the Electronic Control Units (ECU), programming new ECUs, and fixing software-controlled drivability issues and emission issues.
- 【Communication Compatibility】👉The MaxiFlash VCI supports Bluetooth (BT), Wi-Fi, and USB communications. It can transmit vehicle data to the tablet with or without a cable connection. In open areas, the working range of the transmitter through Bluetooth communication is up to 328 feet (about 100 m). The working range of 5G Wi-Fi is up to 164 feet (50 m). If the signal is lost due to being taken out of range, communication will be restored once the tablet is within range.
- 👉The MaxiFlash VCI can be used with a Windows computer with applicable OE subscription for vehicle module programming and when connected to the MaxiSYS MS909 tablet for BMW and for Mercedes (compatible) vehicle module programming.
- 👉Includes One-Year Limited Warranty. This VCI Kit also includes an Autel Main Cable V2.0, USB 2.0 cable, and AC/DC adapter. 🚦If you have any other question, feel free to contact 📧 mbdh2022@outlook. com 📧
Last update on 2024-06-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.