“This site contains affiliate links for which OEMDTC may be compensated” |
July 31, 2019 NHTSA CAMPAIGN NUMBER: 19E051000
Battery Tray may Separate from F-550 Frame
If the battery tray detaches from the chassis, contents of the tray may fall out and become road hazard, and the battery may discharge. Either scenario increases the risk of a crash.
NHTSA Campaign Number: 19E051
Manufacturer MORryde International, Inc.
Components EQUIPMENT
Potential Number of Units Affected 187
Summary
MORryde International, Inc. (MORryde) is recalling certain battery trays sold for installation on Ford F-550 chassis. The battery trays may have inadequate welds, allowing the battery tray to detach from the chassis.
Remedy
MORryde will notify the vehicle manufacturers the purchased the trays, and dealers for those manufacturers will install additional weld areas on both sides of the battery tray for additional support, free of charge. The recall began July 29, 2019. Owners may contact MORryde customer service at 1-574-293-1581.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
MORRYDE | F-550 BATTERY TRAY | 01/25/2019 – 07/10/2019 |
4 Associated Documents
Manufacturer Notices(to Dealers,etc)
RCMN-19E051-9136.pdf 112.526KB
Recall Acknowledgement
RCAK-19E051-3458.pdf 245.606KB
Defect Notice 573 Report
RCLRPT-19E051-8589.PDF 213.271KB
Recall 573 Report – Amendment 1
RCLRPT-19E051-8755.PDF 213.322KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19E051&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- Extreme-duty battery tray for Automotive, Marine, RV batteries
- Battery Tray is constructed from high impact, heavy polypropylene plastic
- Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
- Accommodates 27 series batteries up to 7" x 12.5", Safety Strap and buckle are included.
- 8 mounting points (4 per long length)
- Extreme-duty battery tray for Automotive, Marine, RV batteries and more; designed for a single group 24-31 battery
- Military grade battery hold-down strap; 42 inches water resistant nylon webbing and heavy-duty buckle withstands a tensile load of over 120 kilograms force
- Certified and tested; meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications
- Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure
- Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
- 【Powerful Support】 The whole battery tray is made of steel. The steel sheet is connected to the steel sheet, the material is strong and has strong support, can easily carry the weight of the battery
- 【Longer Life】The battery box has multiple round holes that facilitate air circulation and reduce water retention. The round holes also facilitate heat dissipation, which can improve battery life
- 【Adjustable Size】The battery tray has adjustable bolts. This battery tray can hold batteries up to 10.63 "L × 7.06 "W × 7.5 "H, so it's compatible with most sizes of batteries. Please make sure that it is compatible with the size of the battery being used before selecting it.
- 【Easy to install & Wide applications】The Battery mounting box adopts simple bolt-on design, no need to re-solder. Easy to install, easy to disassemble, save more time and money. Can be used in a variety of scenarios, such as car racks, camping, self-built cabins or boat cabins
- 【More Sately】The surface of the battery bracket adopts flame retardant plastic spraying process, which effectively prevents oxidation, rust and corrosion. The main material of the battery bracket is carbon steel, which has good insulating properties and prevents the spread of battery leakage, providing higher safety.
- Extreme-duty battery tray for Automotive, Marine, RV batteries and more; designed for a single group 27 battery
- Military grade battery hold-down strap; 42 inches water resistant nylon webbing and heavy-duty buckle withstands a tensile load of over 120 kilograms force
- Certified and tested; meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications
- Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure
- Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
- Holds Batteries in Place: Safely holds group 24/24M automotive batteries to prevent movement during transportation
- Safe and Durable Construction: Constructed of heavy-duty, acid-resistant plastic with stainless steel hardware
- Fit: Fits batteries up to 11 1/8-inches (L) x 6 ¾-inches (W) x 8-inches (H)
- Overall Dimensions: 11 9/16-inches (L) x 8 ½-inches (W) x 9 5/8-inches (H)
- Includes: (1) tray, (2) rods, (1) cross bar and (1) knob
- THEPRO Steel Universal Battery Trays have a vinyl coating for rust and corrosion resistance.
- The groove design prevents the battery from contacting the tray fasteners; the Battery Hold-Down Tray has a solid structure, good load-bearing capacity, and durability. There have 3 choice battery tray sets, please read the description to select the one you need.
- [27cm J bolt with 34cm Battery Tray Kit] 27cm(10.6inch) J Bolt with Adjustable Hold Down from 146-203mm(Adjusts to suit battery width 146-203mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 4, 24, 27, 29, 31, 60, 74 & 77
- [23cm J bolt with 34cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 65, 48, 94R
- [23cm J bolt with 28cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 280mm(11in) Battery tray 7.36 in(187mm) width, 10.94 in(278mm) length, fits group 34, 74, 77, 78, 54, 55
- Application - For Most Car and Truck batteries including the following optima sizes: For Red top: 34, 34R, 34/78 & For Yellow top: D34, D34/78 & For Blue top: 34M, D34M .
- Package includes: 1*Base plate, 1*Top plate, 3*All-thread hold downs, 3*thread sleeves & 6*Matching nuts.
- Quality - Made of high-quality aluminum alloy and iron, it is durable, rust-proof, and perfectly protects the battery.
- Features - Designed to securely mount your battery in your vehicle using sturdy base plates and hold-down plates and includes heavy duty 3/8" hardware.
- Perfect Design - Bottom tray will accept batteries up to 10.5" Length x 6.95" width x 6.7" height with provided thread sleeves(batteries over 7.4" tall will require longer 3/8-16 all-thread).
- Extreme-duty battery tray for Automotive, Marine, RV batteries and more; designed for a single group 24 battery
- Military grade battery hold-down strap; 42 inches water resistant nylon webbing and heavy-duty buckle withstands a tensile load of over 120 kilograms force
- Certified and tested; meets United States Coast Guard (USCG) Code of Federal Regulations 183.420 and American Boat and Yacht Council (ABYC) E-10.7 specifications
- Designed for abuse; impact resistant down to minus 20 degrees Fahrenheit, withstands acid, gas, oil and other contaminants, and immune to UV exposure
- Keeps your battery safe; keeps your battery securely mounted and limits battery movement with its included battery strap
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.