“This site contains affiliate links for which OEMDTC may be compensated” |
May 23, 2019 NHTSA CAMPAIGN NUMBER: 19E035000
Incorrect Tube Nuts on Brake Lines
The reduction in the braking system pressure may cause a loss of braking power in the rear braking system, increasing the risk of crash.
NHTSA Campaign Number: 19E035
Manufacturer Transfer Flow Inc – Chico, CA
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 700
Summary
Transfer Flow Inc – Chico, CA (Transfer Flow) is recalling certain rear brake lines used for mobility van conversions. The brake lines may have incorrect tube nut fittings installed, which may cause a pressure drop within the braking system.
Remedy
Transfer Flow has notified the affected vehicle manufacturer, and dealers for that manufacturer will install an adaptor to correct the issue, free of charge.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Update for Recall 19E-035
As of date 7/26/2019
- Transfer Flow Inc. has provided BraunAbility with eight hundred and eleven (811) brake line tube nut adapters (070NU34247 M10-1 x 3/8-24) to remedy the non-conforming parts.
- All adapters provided at zero cost to Braun
- A total of seven hundred (700) non-conforming parts needed to be recalled and remedied
- Therefore, TFI has supplied BraunAbility with one hundred and eleven (111) extra adapters
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
TRANSFER FLOW | REAR BRAKE LINE | 01/18/2018 – 04/23/2019 |
4 Associated Documents
Defect Notice 573 Report
RCLRPT-19E035-9164.PDF 214.09KB
Recall Acknowledgement
RCAK-19E035-7924.pdf 244.655KB
Recall Quarterly Report #1, 2019-2
RCLQRT-19E035-2369.PDF 211.116KB
Miscellaneous Document
RMISC-19E035-1943.pdf 125.206KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19E035&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- Material: Brake line fittings are made of durability materials with unique rust-proof and corrosion-resistant technology.
- 3/16" Brake Line Fittings: 19 Fittings for 3/16" Brake Line:12 x 3/16" (3/8-24) Inverted Tube Nut;3 x 3/16" (7/16-24) Inverted Tube Nut;2 x 3/16" (1/2-20) Inverted Tube Nut;2 x 3/16"(9/16-18) Inverted Tube Nut.
- 1/4" Brake Line Fittings: 16 Fittings for 1/4" Brake Line:12 x 1/4" (7/16-24) Inverted Tube Nut;2 x 1/4" (9/16-18) Inverted Tube Nut;2 x 1/4" (1/2-20) Inverted Tube Nut. Please confirm the detail size according to the picture before purchasing.
- Standard: Comply with SAE size, all fittings are metric size specifications, and 3/8'-24 or 7/16-24 threaded fittings are usually suitable for the conventional inverted flare/double flare size of 3/16 or 1/4 inch brake liners.
- Application: This brake line nut is suitable for inverted bellmouth on 3/16 inch and 1/4 inch Tube.
- Enhance Braking System Performance: Elevate the performance of your automotive hydraulic braking system with the comprehensive 3/16" fitting kit, consisting of 24 SKUs. Brake line fittings play a pivotal role in ensuring the system's efficiency.
- Premium Material Assortment: Crafted with meticulous attention to quality, this assortment comprises stainless steel, brass, copper-nickel, PVF-coated steel, and coated copper-nickel tube nuts and fittings. While they pair seamlessly with our brake line products, they are universally compatible with all brake lines.
- Built to Resist Corrosion: Our tube nuts are engineered to withstand the most common enemy of tube fittings – rust and corrosion. They are meticulously plated to offer superior corrosion resistance, protecting them from the harsh elements of sunlight, rain, snow, and extreme weather conditions.
- Precision Fit: Designed for precision, our tube nuts adhere to standardized threading dimensions and wrench sizes, ensuring compatibility with a wide range of automotive brake lines. Even individuals without professional expertise can effortlessly install these top-tier tube fittings using basic automotive tools.
- Versatile Solution: The 4LifetimeLines fitting assortment is a versatile addition to your automotive toolkit. It seamlessly works with most automotive hydraulic brake lines, accommodating copper-nickel and steel lines with ease. This comprehensive assortment eliminates the need for additional purchases, and its ergonomic design ensures easy handling.
- Fit for: the unions measures approx. 0.6 x 0.9 inch, the nut measures approx. 0.67 x 3/8 inch, fit for most common inverted flare or double flare sizes for 3/16 inch tube, for use with 3/16 inch steel, poly coated or copper brake lines; Please confirm the size of the details according to the picture before purchasing
- Size and material: both the unions and nuts are metric 3/8-24 threads (regular 3/16 inch tube fitting size), all brake line fittings are made of quality brass to prevent rust and plated for corrosion resistance
- You will get: 12 pieces brake line fittings in the package, include 4 pieces unions and 8 pieces nuts, you can share them with your family and friends, these tubes unions are good fittings
- Inverted flare union: these unions are a nice option to join 2 (3/16 inch) brake lines together
- Brake line fitting connect: the nut is called the fitting for 3/16 inch tube, these unions fittings have a hex size of 3/8 inch and the threads are 3/8 inch with a thread pitch of 24
- Material: Brake pipe nut is made of high strength steel, and its surface is coated with anti-corrosion layer.
- Upgraded 19 Fittings for 3/16”Brake Line: 3 x 3/16” (7/16-24) Inverted Tube Nut; 12 x 3/16" (3/8-24) Inverted Tube Nut; 2 x 3/16” (1/2-20) Inverted Tube Nut; 2 x 3/16"(9/16-18) Inverted Tube Nut.
- Upgraded 16 Fittings for 1/4”Brake Line: 2 x 1/4”(7/16-24) Inverted Tube Nut; 10 x 1/4” (7/16-24) Inverted Tube Nut (Long); 2 x 1/4”(9/16-18) Inverted Tube Nut; 2 x 1/4”(1/2-20) Inverted Tube Nut;
- 3/8' - 24 or 7/16-24 threads fittings commonly fits for regular inverted flare/ double flare sizes for 3/16 or 1/4 inch brake lines tube.
- Application: This brake line nut is suitable for inverted bellmouth on 3/16 inch and 1/4 inch Tube.Note:The nut threads are regular tube fitting size. Please check before shopping!
- Contains 30 Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions
- Contains 30 Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions
- Contains 5 Piece 3/16″ OD Compression Brake Line Fittings
- Contains 5 Piece 1/4″ OD Compression Brake Line Fittings
- Easily check thread sizes for the most common thread sizes found in automotive braking systems
- Check thread sizes for: 1/8" NPTF, 1/4" NPTF, 3/8" x 24, 7/16" x 20, 7/16" x 24, 1/2" x 20, 9/16" x 18, 9/16" x 20, 5/8" x 16
- Each size has a male and female end checker
- Thread sizes are clearly and permanently stamped innto each gauge
- Assembled onto a plastic coated wire loop for hanging in convenient locations throughout the shop or garage
- PACKAGE INCLUDE -Part 1: MuHize upgraded 16 Fittings for 3/16”Brake Line: ① 2 x 3/16” (7/16-24) Inverted Tube Nut; ② 10 x 3/16" (3/8-24) Inverted Tube Nut; ③ 2 x 3/16” (1/2-20) Inverted Tube Nut; ④ 2 x 3/16"(9/16-18) Inverted Tube Nut;
- PACKAGE INCLUDE - Part 2: MuHize upgraded 16 Fittings for 1/4”Brake Line: ① 2 x 1/4”(7/16-24) Inverted Tube Nut; ② 10 x 1/4” (7/16-24) Inverted Tube Nut (Long); ③ 2 x 1/4”(9/16-18) Inverted Tube Nut; ④ 2 x 1/4”(1/2-20) Inverted Tube Nut; Note:The nut threads are regular 1/4 inch tube fitting size. Please check before shopping!
- HIGHER QUALITY - MuHize brake line fittings are made of durable material with unique rust corrosion proofing technology.
- WIDELY APPLICATION - MuHize 3/8' - 24 or 7/16-24 threads brake fittings commonly fits for regular inverted flare/ double flare sizes for 3/16 or 1/4 inch brake lines tube.
- PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. 100% brand new & made from excellent materials, and good contact.
- Available in many different styles, including inverted, flared, trailer, and three-way
- A large selection of thread sizes available
- Conveniently packaged in diverse piece counts to assist with both small and large projects
- Also suitable for a broad variety of industrial and commercial uses
- Support available - every Dorman part is backed by Dorman's ASE Blue Seal Certified technical support team
- 3 AN Male to 3/8-24 in Inverted Flare Female
- Clip-In,
- Zinc Oxide
- Steel
- Fit type: Vehicle Specific
- Inverted & Double Flare Union: The brake line fittings can be perfectly connected with 3/16" brake line tube perfectly, suitable for common inverted flare and double flare size for 3/16 inch steel, poly coated or copper brake line
- Fitting Size: Both brake line nuts and brake union of the metric brake line fittings are metric 3/8" - 24 threads (regular 3/16 inch tube fitting size)
- High Quality: Brake line union kit are made of high quality brass, ductile at high temperature and has low magnetic attraction. Brake line union bubble is sturdy and reliable to serve for long time
- Package Included: 3/16 brake line fitting include 14 pcs 3/8" pipe brake line nuts and 7 pcs 3/8" brake unions. Total 21 pcs brake line fittings adapter assortment for 3/16 brake line tube
- Reliable Assurance: This 3/16 brake line union is good fittings to share with your family and friends. If you have any questions about the brake line kit, we provide professional and friendly pre-sales and after-sales service
Last update on 2024-04-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.