“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10161722
Manufacturer Communication Number: IS-18091
Summary
This instruction sheet explains how to install the Tie Rod 610052.
34 Affected Products
Vehicles
MAKE | MODEL | YEAR |
PREVOST | H3-41 | 2003-2019 |
PREVOST | H3-45 | 2003-2019 |
Prevost Technical Publications
SEOCONTENT-START
Writer: FL <QF7720959 rev 5>
Instruction Sheet IS-18091
Tie Rod 610052 installation instructions
Prevost vehicles with S84 / S84U I-beam axles 1994- today
Replaces 611024; 611025; 611292; 611026.
First Release
05-28-2019
MATERIAL
Kit #IS18091 includes the following parts:
Part No.
Description
Qty
610052
TIE ROD ASSY
1
610051
NUT HEX SELF LOCKING M24-1.5
2
IS-18091
INSTRUCTION SHEET
1
FI-18091
FEUILLE D’INSTRUCTION
1
NOTE
Material can be obtained through regular channels.
PROCEDURE
DANGER
Park vehicle safely, apply parking brake, stop engine. Prior to working on the vehicle, set the ignition switch to the OFF position and trip the main circuit breakers equipped with a trip button. On Commuter type vehicles, set the battery master switch (master cut-out) to the OFF position.
Lock out & Tag out (LOTO) must be performed during set-up, maintenance or repair activities. Refer to your local procedure for detailed information regarding the control of hazardous energy.
Draft June 06 2019
IS-18091
Page 2 / 3
Writer: FL <QF7720959 rev 5>
1. Lift vehicle with mobile column lift.
2. Disassemble former tie rod by removing the
cotter pin and castle nut (4). Disengage the
ball joint pin from the levers. If your axle
alignment was good, keep the tie rod for
reference.
FIGURE 1:
3. Clean all mating surfaces thoroughly,
removing grease and corrosion.
4. Finish cleaning with brake cleaner fluid.
FIGURE 2
5. Adjust the length of the new tie rod to fit the
former tie-rod length by screwing / unscrewing
ball joints by one turn increments.
FIGURE 3: ADJUST BY ONE TURN INCREMENTS
Draft June 06 2019
IS-18091
Page 3 / 3
Writer: FL <QF7720959 rev 5>
6. Once close to the length of the former tie rod,
perform fine adjustment using the adjuster
sleeve to reach the same length. (See Figure
4)
NOTE: This sleeve is also used to fine adjust toe-in
to the values applicable to your specific axle.
Refer to Maintenance Information MI18-45 and your
vehicle’s maintenance manual in Section 14-
Steering under “Front Wheel Toe-in”.
FIGURE 4
7. Install new tie rod. Orient tube bend so it is
pointing down and parallel to the axle beam.
FIGURE 5: TIE ROD ORIENTATION
8. Tighten ball joint self-locking nut (item 1) to
155-170 lb-ft (210-230 Nm)
These nuts are single use and should be
replaced every time they are unscrewed.
9. Tighten clamp bolts (item 2) to 107-129 lb-ft
(145-175 Nm)
FIGURE 6
Maintenance information
For further information refer to maintenance information MI18-45, available on the Prevost technical
publications web site.
PARTS / WASTE DISPOSAL
Discard waste according to applicable environmental regulations (Municipal/State[Prov.]/ Federal)
Draft June 06 2019
IS-18091
05-28-2019
https://www.nhtsa.gov/recalls?nhtsaId=10161722
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161722-0001.pdf
“This site contains affiliate links for which OEMDTC may be compensated” |
- Lubrimatic 11-316 1 Lb Multi-Purpose Grease
- Long lasting, hard working formula delivers high performance in a wide range of heavy-duty applications
- Recommended for chassis, universal joints and other general purpose applications around the home, farm or shop
- Works best for lubricating rolling parts
- Nlgi 1-1/2; Drop point 350 degrees F; pumps to -10 to -15 degrees F
- Patented synthetic NLGI grade 2 heavy-duty, multipurpose lubricant
- Dielectric, Food Grade, Clean
- NSF Rating H-1, safe for incidental food contact
- Will not drip, run or evaporate
- Lithium complex grease designed for multipurpose everyday applications
- Excellent grease for agriculture equipment, powersports equipment, automotive grease lube points, ball joints, bushings, chassis lubrication, electric motors, gears, plain bearings, presses, roller bearings, tie-rod ends, steering knuckles, trailers, hitch ball, universal joints, wheel bearings, winches
- Mechanics choice for automotive grease applications and truckers choice for fifth wheel (5th wheel) grease
- Superior water resistance, extreme pressure and high temperature protection suitable for scheduled maintenance greasing of journal and anti-friction bearings, chassis fittings, springs, water pumps, universal joints, non-disc brake wheel bearings, lawn mower equipment, power tools and more!
- Typical industries include automotive, car, truck, motorcycle, ATV, boat, construction, mining, drilling, and several industrial applications
- Superior Automotive Silicone Lubricant: This silicone lube is uniquely formulated to be gentle on most materials, ensuring it won't damage or corrode surfaces over time. Ideal for use as a brake lubricant, it also functions effectively as a sealant for automotive components.
- Moisture Barrier Protection: It acts as an effective barrier against moisture, helping to prevent rust and corrosion on metal surfaces in your vehicle. Use it on windows, doors, and even in the garage for long-lasting protection.
- Heat and Moisture Resistant: Unlike traditional oils and lithium grease, this silicone grease maintains its integrity under high temperatures and in moist conditions, ensuring it won't deteriorate over time. This makes it an excellent choice for lubricating brake slide pins and door hinges.
- Waterproof and Moisture-Proof: This multipurpose grease creates a reliable, waterproof, and moisture-proof barrier on a variety of surfaces, making it perfect for automotive use, including on O rings and other sensitive parts.
- Convenient Application: The product comes with an easy-to-use brush top lid, allowing for precise and hassle-free application. This feature is particularly useful when applying the lubricant to intricate parts like brake components and door mechanisms, ensuring comprehensive coverage with each use.
- auto & truck maintenance
- country of manufacture: united states
- manufacturer: valvoline
- product packaging may vary
- Flash point: 491.0 degrees_celsius
- PREMIUM ALL-PURPOSE GREASE: AtomLube All Purpose Grease (NLGI #2) combines three premium grease options (heavy-duty grease, multi-purpose grease, and marine grease) for use across an extended range of applications. Includes 2, 14 oz. grease tubes.
- MADE IN THE USA: We proudly design and manufacture our products in the USA. You can use AtomLube All Purpose Grease with confidence, knowing that our products have been perfected for your mechanical protection.
- LONGER LASTING LUBRICATION: This general purpose grease has a high resistance to oxidation and washout to guarantee extended service life and longer lubrication intervals. It provides lasting protection during periods of extreme pressures and high temperatures.
- HIGH-PERFORMANCE LUBRICANT: This powerful, waterproof grease eliminates friction and corrosion. AtomLube All Purpose Grease develops strong adhesion to metal surfaces for strong stay-in-place power even in severe operating conditions.
- NLGI CERTIFIED: Our all-purpose grease meets the National Lubricating Grease Institute (NLGI) performance classification GC-LB for automotive applications in wheel bearing and chassis grease.
- HEAVY-DUTY PERFORMANCE: ABRO #3 Synthetic Lithium Grease provides water-resistant, heavy-duty protection for automotive and marine uses.
- MULTIPURPOSE LUBRICANT: Ideal for maximum protection of wheel bearings, suspension systems, universal joints, steering linkages, and chassis.
- TAILORED FOR HIGH RPM ENGINES: This lithium grease is designed for high RPM and fuel-efficient engines to ensure smooth operation.
- SAFEGUARDING FEATURES: Offers maximum protection to essential car components, reducing friction and preventing premature wear.
- PREMIUM LITHIUM GREASE: High-quality grease for cars, formulated for long-lasting performance in diverse applications and conditions.
- HEAVY DUTY RED GREASE: AtomLube Ultra Heavy Duty Red Grease (NLGI #2) is a multi-purpose high-performance lubricant designed for extended chemomechanical durability. This essential chassis bearing grease has outstanding extreme-pressure lubrication and wear protection. Includes a 2-pack of 14 oz. tubes.
- HIGH-PERFORMANCE LUBRICANT: This powerful, waterproof grease eliminates friction and corrosion. AtomLube Heavy Duty Red Grease develops strong adhesion to metal surfaces for strong stay-in-place power even in severe operating conditions.
- LONGER LUBRICATION INTERVALS: This heavy duty red grease has a high resistance to oxidation and washout to guarantee extended service life and longer lubrication intervals. It provides lasting protection during periods of extreme pressures and high temperatures.
- PROLONGS EQUIPMENT LIFE: Our nano-engineered red grease penetrates complex machine surfaces to protect equipment mechanisms, extend service intervals, and prolong useful life of equipment.
- NLGI CERTIFIED: Ultra Heavy Duty Red Grease meets the National Lubricating Grease Institute (NLGI) performance classification GC-LB for automotive applications in wheel bearing and chassis grease.
- Engage in superior antiwear and antifriction control that ensures smooth operations even under extreme pressure conditions. Remarkable extreme pressure additive package tailored for high-load scenarios, vibrations, and other severe applications.
- Especially recommended for environments where loads and temperatures are high, including situations of occasional impacts due to equipment overload. Extends its use to gearboxes, making it a flexible choice for diverse operating conditions and designs.
- Outstanding pumpability and smooth, stringy texture facilitate easy applications and consistent lubrication. Exhibits high mechanical stability and high adhesion, making it a dependable solution for centralized systems.
- High resistance to water washout and excellent rust and corrosion preventive properties make it suitable for applications where equipment is exposed to water contamination.
- Ideal for trucks, rolling mills, transfer tables, mining equipment, paper mills, crushers, or shredders, and meets the requirements of NLGI GC-LB in accordance with ASTM D4950.
Last update on 2024-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.