“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10161727
Manufacturer Communication Number: IS-19910C
Summary
ELECTRIC FAN DRIVE COOLING SYSTEM CONVERSION WITH DELCO REMY
ALTERNATOR – H3 SERIES US10 up to GHG17
23 Affected Products
Vehicles
MAKE | MODEL | YEAR |
PREVOST | H3-41 | 2010-2018 |
PREVOST | H3-45 | 2009-2017 |
PREVOST | H3-45 VIP | 2009-2013 |
Prevost Technical Publications
SEOCONTENT-START
Writer: E L <QF7720959 rev 5>
Instruction Sheet IS-19910C
ELECTRIC FAN DRIVE COOLING SYSTEM CONVERSION WITH DELCOREMY
ALTERNATOR – H3 SERIES US10 up to GHG17 incl.
REVISION : C THIS DOCUMENT SUPERSEDES PREVIOUS VERSION.
June 27, 19 Step 32, torque was 183 lb-ft, changed for 94 lb-ft
MATERIAL
Kit IS19910 “H3 US10 electric fan drive retrofit with Delco-Remy alternator” contains the
following parts:
Part No. DESCRIPTION Qty
050195 FAN SUPPORT PANEL A1 1
050200 UPPER SHROUD TRANSITION A6 1
050201 LEFT SHROUD TRANSITION A7 1
050202 RIGHT SHROUD TRANSITION A8 1
050203 LOWER SHROUD TRANSITION A9 1
050204 UPPER LEFT SHROUD PANEL H3 US10+ A11 1
050229 ELECTRICAL CONNECTOR COVER A15 1
050206 UPPER RIGHT SHROUD PANEL H3 US10+ A12 1
050213 LOWER SHROUD PANEL H3 US10+ A14 1
050208 LH SIDE SHROUD PANEL H3 US10+ A10 1
050255 RH SIDE SHROUD PANEL & WURTH BOX SUPPORT
H3 US10+
A13 1
IS‐19910C
Page 2 / 74
Writer: E L <QF7720959 rev 5>
012349 IDLER PULLEY
Mechanical
1
012941 PULLEY, DRIVE Mechanical
1
010090
L.H. ENGINE MOUNT Mechanical
1
011213 SUPPORT, IDLER + TENSIONER
Mechanical 1
069893
PULLEY, DELCO REMY ALTERNATOR 10PK 69 DOB
Mechanical
1
453076 CAP, DUST Mechanical
1
IS‐19910C
Page 3 / 74
Writer: E L <QF7720959 rev 5>
506067
1x BELT 10PK1703 ARAMIDE
1x BELT 10PK1703 ARAMIDE (for your spare kit)
Mechanical
2
510991 TENSIONER, BELT Mechanical
1
560720
DELCO REMY ALTERNATOR 55SI 24V-250A Mechanical
1
050286 CAC INLET PIPE H3 US10+ Pipe
1
050406 CAC OUTLET PIPE H3 US10+ Pipe
1
050414 RADIATOR INLET COOLANT PIPE H3 US10+ Pipe
1
050288 RADIATOR OUTLET PIPE H3 US10+ Pipe
1
501027 FITTING, SAE 45º #4FL-Mx1/4NPT-M BR Fitting 1
501308 ADAPTER / PIPE FITTING / 1/4NPT-Fx1/4NPT-M BR Fitting
1
501329 ELBOW 45º / PIPE FITTING / 1/4NPT-Mx1/4NPT-F BR Fitting
1
501332 ELBOW 90º / PIPE FITTING / 1/4NPT-Mx1/4NPT-F BR Fitting
1
052366 HOSE 3/8 ID X 61” LONG hose 1
20550690 HOSE, FLEXIBLE – CHARGE AIR
Location: turbo outlet & engine intake
Hose 2
IS‐19910C
Page 4 / 74
Writer: E L <QF7720959 rev 5>
531469 HOSE, FLEXIBLE – CHARGE AIR
Location: CAC outlet
Hose 1
531471 HOSE, FLEXIBLE – CHARGE AIR
Location: CAC inlet
Hose
1
052889 HOSE, SILICONE 2 1/2″ ID
Location : coolant pipes
Hose
1
053617 HOSE, SILICONE
Location : coolant pipes
Hose
3
21490616 CLAMPS, SPRING LOAD – CHARGE AIR
Location: CAC outlet & inlet
Clamps 8
21490630 CLAMP, SPRING LOAD – CHARGE AIR
Location: turbo outlet & engine intake
Clamps 4
992089 HOSE CLAMP CT CAILLAU 60mm-80mm
Location : coolant pipes
Clamps
16
992081 HOSE CLAMP CT CAILLAU 12-22
Location : coolant filter
Clamps
4
21185073 MOUNT, ANTI-VIBRATION Support
/bracket
1
050305 BRACKET, RADIATOR INLET PIPE Support
/bracket
1
IS‐19910C
Page 5 / 74
Writer: E L <QF7720959 rev 5>
050265 COOLANT FILTER SUPPORT H3 Support
/bracket
1
050303 ALTERNATOR TELLTALE BRACKET Support
/bracket
1
050214 UPPER RADIATOR SUPPORT H3 Support
/bracket
1
069890
LH LOWER ALTERNATEUR SUPPORT
Support
/bracket
1
069891
LH UPPER ALTERNATEUR SUPPORT
Support
/bracket
1
069205 DECAL, WARNING Misc.
2
010111 DECAL, BELT Misc.
1
391028 INSERT, ALTERNATOR TELLTALE Misc. 1
506025 RUBBER EXTRUSION, BLACK Misc.
8 ft
380360 GROUND STUD
Misc.
1
506040 TAPE, ADHESIVE AD1 EPDM CC GY 5/16″X3/4″X25′ Misc. 1
562113 TELLTALE LIGHT MODULE Misc. 1
IS‐19910C
Page 6 / 74
Writer: E L <QF7720959 rev 5>
21937327 FILTER, COOLANT Misc.
1
012921 GROUND STUD
Electrical
1
561610 CONNECTOR HOUSING, PED WEATHER-PACK 4
WIRES
Electrical
1
561783 CAVITY PLUG, CONNECTOR Electrical
4
22722850 I/O-B MULTIPLEX MODULE Electrical
1
23499009-EFD MCM, PROGRAMMED Electrical 1
563593 CONNECTOR, WITH END-OF-LINE 120 OHMS
RESISTOR
Electrical
2
563750 FUSE HOLDER, AMG TYPE Electrical
1
564520 FUSE, AMG 300A Electrical
1
564612 CIRCUIT BREAKER BOX, WURTH Electrical
1
565191 FAN, ELECTRIC Electrical
8
IS‐19910C
Page 7 / 74
Writer: E L <QF7720959 rev 5>
563533 HAND GUARD, FAN Electrical
8
23498721 FAN DRIVE POWER CABLE, 4600mm Harness 1
23524934 L.H. ALTERNATOR POWER CABLE – DELCO REMY Harness 1
23498450 MASTER RELAY TO 300A FUSE CABLE, 300mm Harness 1
23445869 MCM TO I/O-B INTERFACE HARNESS Harness 1
23488790 FAN TO RJB INTERFACE HARNESS H3 Harness 1
23490553 VEHICLE INTERFACE HARNESS Harness 1
068820 HARNESS, FAN DRIVE Harness
1
069246 GROUND CABLE, FAN DRIVE Harness
1
0610037 CONTROL HARNESS, LEFT ALTERNATOR Harness
1
0610035 GROUND CABLE, LEFT ALTERNATOR Harness
1
N37749 TIE, NYLON, DOUBLE hardware
15
509491 TIE, NYLON LARGE EXTRA STRONG 250 LBS hardware
38
504016 TIE, NYLON BLACK (LARGE) hardware
58
504013 MOUNT, TIE HOLE 1/4″ hardware
25
504751 MOUNT, TIE SWIVEL hardware
4
IS‐19910C
Page 8 / 74
Writer: E L <QF7720959 rev 5>
504750 MOUNT, TIE TREE hardware
1
509490 MOUNT, TIE DOUBLE GRAY hardware
15
562679 MOUNT, SQUARE SELF-ADHESIVE BLACK hardware
4
500411 WSH FL SS .260X.697X.05 (M6,1/4) hardware 1
500449 WASHER, FLAT SS .687X1.5X0.078 (M16,5/8) hardware 1
500482 WASHER, SPLIT LOCK Z050 .506X.873X.125
(M12,1/2)
hardware 1
500942 WASHER, SPLIT LOCK N500 8.1X14.8X2
(M8,5/16,#18)
hardware 4
502570 WASHER, SPLIT LOCK SS 6.1X11.8X1.6 (M6,#12) hardware 62
502573 WASHER FL SS 6.4 X 12.0 X 1.6 (M6,1/4) hardware 1
507657 WASHER, BANJO FITTING M14 hardware 8
5001137 WSH FL SS .203X.438X.06 (M5,#10) hardware 2
5001341 WASHER, FLAT SS 8.4X17X1.6 (M8,5/16) hardware 7
5001737 WASHER, SPLIT LOCK N500 10.2X18.1X2.2
(M10,3/8)
hardware 4
5001751 WASHER, FLAT N500 10.5X26X2 (M10,3/8) hardware 10
5001833 WASHER, BELLEVILLE SPR SS 301
6.65X17.4X1.27(M6,1/4
hardware 32
5001868 WASHER, BELLEVILLE SS 8.4X18X2 (M8,5/16) hardware 4
5001935 WASHER, FLAT SS 10.5X18X1.6 (M10,3/8) hardware 1
5002008 WASHER, FLAT HARD N500 13X35X5 (M12,1/2) hardware 1
500998 NUT HEX BR 1/2-13 hardware 1
502837 NUT HEXF STO N500 M8-1.25 hardware 2
502859 NUT HEX NYRT NX500 M10-1.5 G10 hardware 4
5001180 NUT HEX NYRT SS 10-24 hardware 2
IS‐19910C
Page 9 / 74
Writer: E L <QF7720959 rev 5>
5001182 NUT HEX NYRT SS M6-1 hardware 1
5001665 NUT HEX NYRT NX500 M22-2.5 hardware 1
5001761 NUT HEXF NYRT NX500 M12-1.75 G8 hardware 2
5001930 NUT HEXF NYRT NX500 M10-1.50 PC 10 hardware 2
5001983 NUT HEX NYRT NSS M8-1.25 hardware 3
500685 NUT HEX NYRT SS 5/16-18 hardware 1
500119 SCREW, CAP HEX SS NSS M8X1.25X20 hardware 4
500658 SCREW TC PAN PH Z050 10-24X3/4 hardware 11
502719 SCREW, CAP HEX SS NSS M10X20 G8.8 hardware 1
502686 SCREW, CAP HEX SS NSS M6X30 hardware 33
502804 SCREW, CAP HEX N500 M10-1.5X25 G8.8 hardware 8
502848 SCREW TC HEX F N500 1/4-20X3/ hardware 22
5001296 SCREW, CAP HEXFN500 M12-1.75 X 80 CL10.9 PT hardware 6
5001308 SCR CAP HEXF N500 M10-1.5X40 G10.9 hardware 4
5001643 SCREW, CAP HEXF G500 M8-1.25X25 G8.8 PT hardware 3
5001697 SCREW, CAP HEX SS NSS M6X16 hardware 62
5001738 SCREW, CAP HEX N500 M8X30 G8.8 FT hardware 4
5001745 SCREW, CAP HEX N500 M8-1.25X25 G8.8 hardware 2
5001786 SCREW, CAP HEXF AD N500 M12-1.75X30 G8.8 hardware 1
5001799 SCREW, CAP HEXF N500 M10-1.5 X 70 G10.9 hardware 4
5001940 SCREW CAP HEX N500 M12X1.75X140 hardware 2
5002091 SCR CAP HEXF N500 M10-1.5X120 G10.9 hardware 4
504379 RIVET, POP DOME SS OE 3/16X1/4 hardware
41
504610 RIVET MGL PRDG SS 1/4X5/8 hardware
14
IS-19910 INSTRUCTION SHEET 1
IS‐19910C
Page 10 / 74
Writer: E L <QF7720959 rev 5>
Other parts or products that may be required:
Part No. DESCRIPTION
680459 Loctite 404, INSTANT ADHESIVE 9.3gr
680098 LOCTITE 567 THREAD SEALANT 250ML
680038 LOCTITE 243, BLUE THREADLOCKER 50ML
Writer: <QF7720959 rev 5>
EL
NOTE
Material can be obtained through regular channels.
PROCEDURE
DANGER
Park vehicle safely, apply parking brake, stop engine. Prior to working on the vehicle, set the
ignition switch to the OFF position and trip the main circuit breakers equipped with a trip
button.
IS‐19910C
Page 12 / 74
Writer: E L <QF7720959 rev 5>
ELECTRICAL CABLES & HARNESSES DIAGRAM
IS‐19910C
Page 13 / 74
Writer: E L <QF7720959 rev 5>
HOSE CLAMP TORQUE (coolant lines and charge air cooler)
HOSE CLAMPS
No DESCRIPTION TORQUE
1
(Ø 2 ½ ” or
lower)
Constant-Torque hose clamps – coolant lines
Oetiker hose clamps – Green spring – coolant lines
Oetiker hose clamps – unpainted spring – coolant lines
Caillau hose clamps – coolant lines
90-100 lbf-in
12-18 lbf-in
8-9 lbf-in
30 lbf-in
2
(Ø 4 ¼ ”)
Constant-Torque hose clamps 4.25in – charge air cooler
(CAC)
4.5-5.5 lbf-ft
IS‐19910C
Page 14 / 74
Writer: E L <QF7720959 rev 5>
Writer: <QF7720959 rev 5>
EL
1. In the main power compartment, place the
battery master switch to the OFF position. Trip
all the main breakers that have a manual trip
lever or button (CB2, CB4, CB6,
etc…depending on the year model).
2. Remove L.H. side rear fender.
FIGURE 1
Drain the cooling system
3. Connect the coolant extractor. Use the coolant
extractor to drain the coolant from the engine.
An alternate method is to drain the coolant into
a suitable container using the drain hose.
FIGURE 2
IS‐19910C
Page 16 / 74
Writer: E L <QF7720959 rev 5>
4. Unfasten cap screws and remove access
panel located behind tag axle L.H. side wheel.
FIGURE 3
5. Open radiator door to access radiator
assembly. Unfasten upper arm assembly.
FIGURE 4
6. Remove radiator sealing frame.
FIGURE 5
IS‐19910C
Page 17 / 74
Writer: E L <QF7720959 rev 5>
7. Remove clamps and then break hoses from
the front coolant and charge air pipes.
FIGURE 6
8. Remove rear coolant and charge air hose
clamps then break hoses loose.
FIGURE 7
9. Remove the upper radiator assembly support
bracket.
Keep the three small (3) rectangular plates for
reuse
FIGURE 8
IS‐19910C
Page 18 / 74
Writer: E L <QF7720959 rev 5>
10. Remove the lower radiator assembly protector
tube.
FIGURE 9
11. Disconnect the radiator vent hose on top of
the radiator.
12. Cut the cable tie and disconnect electrical
connector from the fan clutch. The remaining
connector on the chassis cable will be capped
and left in place.
13. Remove fan drive shaft fasteners at the fan
clutch.
FIGURE 10
IS‐19910C
Page 19 / 74
Writer: E L <QF7720959 rev 5>
14. Open the secondary lock of connector
#561610. Insert a cavity plug #561783 in each
of the four (4) cavities with the smallest end
protruding as shown on the example at right.
Close the secondary lock.
15. Cap the chassis fan clutch cable with this
connector. Secure the connector on the inner
wall above the radiator using:
1x tree mount #504750
1x nylon tie #504016
FIGURE 11
FIGURE 12
FIGURE 13
16. Remove the fan drive casting.
FIGURE 14
IS‐19910C
Page 20 / 74
Writer: E L <QF7720959 rev 5>
17. Unscrew all lower radiator assembly mounting
fasteners (2 bolts on R.H. side, 2 bolts on L.H.
side).
FIGURE 15
18. Position a forklift under the radiator assembly
that is capable of safely lifting the radiator. With
assistance, slide radiator assembly out and
onto the forklift. Transfer radiator assembly to a
secure location.
FIGURE 16
IS‐19910C
Page 21 / 74
Writer: E L <QF7720959 rev 5>
19. Remove the tripod from the radiator/CAC
assembly.
FIGURE 17
FIGURE 18
20. Remove the fan shroud.
FIGURE 19
IS‐19910C
Page 22 / 74
Writer: E L <QF7720959 rev 5>
21. The new cooling pack arrangement requires
being located four inches closer to the engine
to give the needed clearance for the electric
fans. For this reason, rotate both the
radiator/CAC assembly mounting supports
180° and reinstall.
BEFORE
FIGURE 20: MOUNTING SUPPORT IN INITIAL POSITION
AFTER
FIGURE 21: MOUNTING SUPPORT AFTER 180° ROTATION
22. Remove the rear bumper (undo three nuts and
one attachment plate each side).
FIGURE 22
IS‐19910C
Page 23 / 74
Writer: E L <QF7720959 rev 5>
23. On the engine hot side, remove the following
pipes:
radiator inlet & outlet pipes
CAC inlet and outlet pipes
Keep the hose clamps, the flexible hoses for
later reuse
Keep the fittings found on the pump inlet pipe
for later reuse
FIGURE 23
FIGURE 24
24. Remove all the drive belts mounted on the
crank pulley.
FIGURE 25
IS‐19910C
Page 24 / 74
Writer: E L <QF7720959 rev 5>
25. Remove the drive pulley. Discard the 6 bolts.
FIGURE 26
26. Remove the rust, clean and prepare the
surface on the vibration damper as shown.
Make a smooth surface for the pulley that will
be reinstalled later on.
FIGURE 27
FIGURE 28
IS‐19910C
Page 25 / 74
Writer: E L <QF7720959 rev 5>
27. Properly support the engine as one of the
engine support will be interchanged.
FIGURE 29
28. Remove the two (2) coolant hoses shown on
the image. Keep the two (2) banjo fittings for
later use.
BANJO FITTING
FIGURE 30
29. Remove the L.H. rear engine support on which
the coolant filter is installed (10 bolts). Keep the
hardware for reuse.
Take note that the water pump belt
idler/tensioner assemble will be reused as
is. Do not take apart tensioner or idler.
FIGURE 31: L.H. REAR ENGINE SUPPORT
IS‐19910C
Page 26 / 74
Writer: E L <QF7720959 rev 5>
30. Cut the engine cradle rail as shown to increase
the clearance between the cradle and the
alternator. Carefully work the edge to achieve a
smooth finish and contour.
Wear appropriate personal protection
equipment.
Protect engine and area with blankets.
Blow area clean when completed.
Apply paint to protect the bare metal
FIGURE 32
31. Remove the water pump idler/tensioner
assembly from the former engine mount. To do
so, unscrew three (3) bolts at the back of the
engine mount.
FIGURE 33
IS‐19910C
Page 27 / 74
Writer: E L <QF7720959 rev 5>
32. Reinstall the idler/tensioner assembly as a unit
on the new L.H. engine mount #010090.
Mount the idler/tensioner assembly using
three (3) cap screws #5001643
Tighten to 14‐17 lb‐ft
FIGURE 34
FIGURE 35
IS‐19910C
Page 28 / 74
Writer: E L <QF7720959 rev 5>
33. Install the new engine mount #10090 using
seven (7) M14 screws saved from the former
engine support with the exception of:
Ground stud #012921 (1x) and nylon
insert NYRT nut #5001665 (1X)
Isolator cap screw #5001940 (2X)
Nut #5001761 (2X)
FIGURE 36
Seven (7) mounting screws torque : 90-94 lb-ft
(128 Nm)
FIGURE 37
Tighten ground stud to 94 lb-ft
Tighten stud nut to 94 lb-ft
FIGURE 38
Tighten isolator screws to 60 lb-ft
IS‐19910C
Page 29 / 74
Writer: E L <QF7720959 rev 5>
34. Install the new crank pulley using six new bolts
#5001296. Use blue Loctite on the bolt threads.
Torque to 26 lb-ft in the numerical order 1,
2, 3, 4, 5, 6, 1
Once done perform a final tightening to the
value of 66 lbf-ft.
FIGURE 39
35. Reinstall the water pump drive belt.
FIGURE 40: WATER PUMP DRIVEBELT
36. Reinstall the AC compressor drive belts.
37. Install alternator brackets #069890 and
#069891.
Note: Install the upper bracket #069891 with
short end towards bumper and long end towards
turbo.
Use:
4x cap screws #5001308
Apply blue Loctite
Tighten to 48 lb-ft
FIGURE 41
IS‐19910C
Page 30 / 74
Writer: E L <QF7720959 rev 5>
38. Installing the LH alternator pulley. Place
#560720 alternator flat on a bench with the
shaft horizontal.
Required tools:
15-16” crowfoot adapter
8mm hex bit
Clean shaft and pulley with brake cleaner.
Slide pulley #069893 on shaft by hand.
Hand thread nut on shaft until snug.
Using thin wall15/16”adapter and 8mm hex bit
to block shaft rotation, tighten to 70-80 lbf-ft.
Never use power tools to install pulley and nut.
Note: Do not apply any pressure to end of the
shaft. Internal damage may occur if the shaft is
pushed back and turned.
FIGURE 42
39. Install alternator on support with four (4)
#5002091 M10x120 screws.
Apply blue Loctite
Tighten to 48 lb-ft
FIGURE 43
40. Install the idler support #011213 using:
3x screws #5001799
Tighten to 48 lb-ft
FIGURE 44
IS‐19910C
Page 31 / 74
Writer: E L <QF7720959 rev 5>
41. Install the new idler #012349 with screw
#5001786 and washer #5002008.
Tighten to 59 lb-ft
FIGURE 45
42. Install the dust cap #453076.
FIGURE 46
FIGURE 47
IS‐19910C
Page 32 / 74
Writer: E L <QF7720959 rev 5>
43. Install the new alternator tensioner #510991.
Secure with one screw #5001799 on which
blue Loctite is applied.
FIGURE 48: Tensioner mounting screw torque : 48 lb-ft
44. Install belt #506067. To do so, rotate the
automatic belt tensioner using a ½ square drive
breaker bar.
FIGURE 49
45. Remove former belt routing decal and replace
with decal #010111.
FIGURE 50
IS‐19910C
Page 33 / 74
Writer: E L <QF7720959 rev 5>
46. Install control harness #0610037 on alternator.
Connect circuit I to Indicator (I) post.
Connect circuit S to Sense (S) post.
Use the following hardware:
2x nylon lock nut #5001180
2x washer #5001137
Tighten to the following torque values:
Sense (S): 25-45 lb-in
Indicator (I): 25-45 lb-in
Apply Color Guard Rubber Coating on the
connections.
FIGURE 51
FIGURE 52
47. Perform the “Multiplex Modules Disconnection
Procedure Prior to Welding” found in your
vehicle Maintenance Manual, Section 00:
General.
48. Weld the new coolant filter support #050265 on
the engine cradle.
23 ½ inches from the end of the cradle
FIGURE 53
IS‐19910C
Page 34 / 74
Writer: E L <QF7720959 rev 5>
FIGURE 54
FIGURE 55
FIGURE 56
IS‐19910C
Page 35 / 74
Writer: E L <QF7720959 rev 5>
49. As a preparation to welding, buff the paint to
reach bare metal. Weld the ground stud
#380360 centered in the beam and at 14
inches from the beam end.
50. Apply black paint to the area surrounding the
ground stud and also on the ground stud
circular base. DO NOT apply paint on the
electrical contact surfaces.
FIGURE 57
FIGURE 58: GROUND STUD #380360
FIGURE 59: GROUND STUD #380360
51. Install a tie mount #504013 with one screw
#502686 at the back of the L.H. engine mount.
FIGURE 60
IS‐19910C
Page 36 / 74
Writer: E L <QF7720959 rev 5>
52. Install the alternator ground cable #0610035.
Use the ground screw and lock washer
supplied with alternator with the addition of a
flat washer #500411.
torque: 50-60 lbf-in
FIGURE 61
FIGURE 62
53. Secure the alternator ground cable to the
previously installed tie mount using one (1)
nylon tie #509491.
54. Secure the alternator ground cable to the
previously installed ground stud on the L.H.
engine mount.
Use screw #502719 & washer #5001935
Tighten to 20 lbf-ft
Protection against corrosion. Apply Color
Guard rubber coating on the ground stud
once the ground cable is hooked up.
FIGURE 63
55. To the previously installed coolant filter
support, install the filter holder recovered from
the former installation.
FIGURE 64
56. Install the new coolant filter onto the filter
holder. Check the clearance between the filter
and the close hose clamps of the coolant pipe
leading to the transmission oil cooler.
IS‐19910C
Page 37 / 74
Writer: E L <QF7720959 rev 5>
57. Transfer the drain plug and the coolant
extractor quick connect fitting saved from the
old pump inlet pipe.
Apply Loctite 567 Thread Sealant prior
installation of the fittings
58. Install the new radiator outlet pipe #050288.
Reinstall with the flexible hose #053617 and
the four (4) hose clamps #992089. Use steel
wire to hold the end of the pipe until the
radiator is installed if required.
A: # 992089 hose clamp (4x)torque: 30 lbf-in
B: drain plug
C: coolant extractor quick connect valve
D: # 053617 silicone hose
FIGURE 65
59. Reinstall the elbow between the copper heater
line and the new radiator outlet pipe.
For proper clamp torque, refer to HOSE CLAMP
TORQUE on page 12.
FIGURE 66
60. Using blue flexible hose #052366, prepare two
new short hoses for the coolant filter.
a) Cut two sections of blue flexible hose, one 22
inches long and a second 38 inches long.
A : hose clamp #992081 (4x)
B: banjo fitting copper washer #507657 (6x)
b) Use the banjo fittings recovered from the
previous installation.
hose clamp torque: 30 lbf-in
FIGURE 67
FIGURE 68
IS‐19910C
Page 38 / 74
Writer: E L <QF7720959 rev 5>
61. Install the 22” long and 38” long hoses
prepared at the previous step as shown on the
images.
FIGURE 69
FIGURE 70
62. Connect the DEF injector coolant line return
hose to the radiator outlet pipe.
Use two (2) new banjo fitting copper washer
#507657
FIGURE 71: DEF INJECTOR COOLANT LINE RETURN HOSE
IS‐19910C
Page 39 / 74
Writer: E L <QF7720959 rev 5>
63. Connect the coolant line coming from the surge
tank to the radiator outlet pipe.
TORQUES:
Constant-Torque with spring washers clamps :
90-100 lbf-in
Oetiker clamps – green spring : 12-18 lbf-in
Oetiker clamps – unpainted spring : 8-9 lbf-in
Caillau clamps : 30 lbf-in
FIGURE 72
64. Secure the coolant hoses together using nylon
ties.
A : handcuff nylon tie #N37749 (3x)
FIGURE 73
FIGURE 74
IS‐19910C
Page 40 / 74
Writer: E L <QF7720959 rev 5>
65. Secure the coolant hose near the engine block
«push-lok» fitting as shown.
B : nylon tie #504016 (1x)
FIGURE 75
IS‐19910C
Page 41 / 74
Writer: E L <QF7720959 rev 5>
66. Hook up the “L.H. alternator power cable”
#234524934 to the alternator positive (+) post.
Place the flash washer between the cable lug
and the nut.
1x nut #500685 torque: 80-125 lbf-in
1x flat washer #5001341
Apply Color Guard rubber coating at the alternator
ground ( ) and positive (+) connections.
IMPORTANT NOTE
Early alternators are provided with a shorter positive
stud.
With the short stud, nut #500685 does not thread
fully to allow the locking nylon insert to grip on the
threads.
In this case, DO NOT use nut #500685. Use the
nut and lock washer provided with the alternator
instead. Tighten to: 80-125 lb-po (9.0-14.0 N-m).
FIGURE 76
FIGURE 77:
– NUT #500685 DOES NOT THREAD FULLY TO ALLOW
THE LOCKING NYLON INSERT TO GRIP ON THE
THREADS (UPPER IMAGE)
– HARDWARE TO USE WITH SHORT STUD (LOWER
IMAGE)
IS‐19910C
Page 42 / 74
Writer: E L <QF7720959 rev 5>
67. Connect the “fan drive ground cable” #069246
to the ground stud previously welded to the
chassis.
A: split lock washer #500482
B: brass nut #500998
C: fan drive ground cable #069246
FIGURE 78
FIGURE 79
68. Apply Color Guard rubber coating on the
ground stud connection.
FIGURE 80: GROUND STUD WITH RUBBER COATING
IS‐19910C
Page 43 / 74
Writer: E L <QF7720959 rev 5>
69. Install a tie mount #509490 at the location
shown on the picture. Secure the tie mount
with a rivet.
A: tie mount #509490
B: rivet #504610 (hole diameter: Ø 17/64)
C: nylon tie #509491
D: fan drive power cable #23498721
70. Secure the “fan drive power cable” #23498721
onto the tie mount using a nylon tie. Make sure
to leave 26 inches long from the tie mount up
to the end of the “fan drive power cable” red
connector.
FIGURE 81
FIGURE 82
FIGURE 83
FIGURE 84
71. Install six (6) tie mounts to secure the “fan
drive power cable” and the “L.H. alternator
power cable” as shown on the picture.
IS‐19910C
Page 44 / 74
Writer: E L <QF7720959 rev 5>
FIGURE 85
A: tie mount #509490
B: rivet #504610
C: nylon tie #509491
FIGURE 86
72. Route the “fan drive power cable” and the
“L.H. alternator power cable” up to the main
power compartment. Refer to the pictures at
right as a guide for the installation.
73. Secure both cables using seven (5) tie
mounts #509490 fixed with seven (5) rivets
#504610 (hole diameter: Ø 17/64). Secure the
cables on the tie mounts as previously done
with fourteen (10) nylon ties # 509491.
A: tie mount #509490
B: rivet #504610 (hole diameter: Ø 17/64)
C: nylon tie #509491
FIGURE 87
IS‐19910C
Page 45 / 74
Writer: E L <QF7720959 rev 5>
FIGURE 88
IS‐19910C
Page 46 / 74
Writer: E L <QF7720959 rev 5>
74. INSTALLATION OF THE “FAN TO RJB
INTERFACE” HARNESS #23488790
a) Route the “fan to RJB interface” harness
#23488790 up to the main power
compartment. Secure this harness to the
fan drive power cable using nylon ties
#504016.
b) This harness will be connected close to the
fan drive power cable, thus it also requires
26 inches of free length.
FIGURE 89
A: FAN TO RJB INTERFACE” HARNESS #23488790
B: FAN DRIVE POWER CABLE
C: NYLON TIES #504016 (23x approx.)
FIGURE 90
FIGURE 91
FIGURE 92
IS‐19910C
Page 47 / 74
Writer: E L <QF7720959 rev 5>
75. Connect the new CAC outlet pipe #050406 to
the engine intake elbow. NOTE: in case of
interference between this pipe and the ping
tank, rotate the ping tank.
A: #20550690 hose (1x)
B: #21490630 spring loaded clamp (2X) (torque:
5 lbf-ft)
FIGURE 93
FIGURE 94: CONNECTION AT THE ENGINE INTAKE ELBOW
FIGURE 95
IS‐19910C
Page 48 / 74
Writer: E L <QF7720959 rev 5>
76. If your vehicle is equipped with AFSS
(Automatic Fire Suppression System), the new
CAC outlet pipe #050406 is likely to come into
interference with a AFSS extinguishing agent
hose (see image) near the end of the pipe that
connects with the Charge Air Cooler.
If this is the case, move the hose the other side
of the bracket shown, to prevent rubbing
between the hose and the CAC outlet pipe.
FIGURE 96
77. On the diagonal member, change the existing
radiator inlet pipe bracket for the new one
#050305. Use the existing hardware.
FIGURE 97
78. Install the new radiator inlet pipe #050414.
A: #052889 silicone hose
B: # 992089 hose clamp (4x), torque: 30 lbf-in
FIGURE 98
IS‐19910C
Page 49 / 74
Writer: E L <QF7720959 rev 5>
79. Install the new CAC inlet pipe #050286. Use
one new #20550690 CAC flexible hose.
Secure the hose using two (2) spring loaded
clamps #21490630.
A: #20550690 hose
B: #21490630 spring loaded clamp (2X), torque:
5 lbf-ft
FIGURE 99: CONNECTION AT THE TURBO OUTLET ELBOW
80. Reinstall the cooling pack.
FIGURE 100
81. Secure the cooling pack base with the following
parts:
A: 4x screw #502804
B: 8x washer #5001751
C: 4x nut #502859
FIGURE 101
IS‐19910C
Page 50 / 74
Writer: E L <QF7720959 rev 5>
82. In case of interference between the charge air
cooler and the DPF inlet pipe, loosen the pipe’s
V-band clamps. Move the pipe in order to
increase the clearance, then hold the pipe in
place and tighten the V-band clamps.
FIGURE 102
FIGURE 103
83. Using parts #501332, #501308, #501329,
#501027, mount the brass fitting assembly
shown on the image at right.
Apply Loctite 567 Thread Sealant on the
threads
A: #501027
B: #501329
C: #501308
D: #501332
FIGURE 104: BRASS FITTING ASSEMBLY
84. Remove the vent hose fitting found on the
radiator.
FIGURE 105
IS‐19910C
Page 51 / 74
Writer: E L <QF7720959 rev 5>
85. Install the brass fitting assembly in place of
the former vent hose fitting and then connect
the radiator vent hose to the radiator.
86. Prepare the cooling pack upper attachment
with the three (3) rectangular plates (see
image) recovered from the former installation
and the following parts:
A: anti-vibration mount #21185073
B: upper radiator support #050214
C: 2x screw #5001738 , 2x nut #502837
D: 2x screw #5001738 , 2x washer #500942
E: 2x screw #5001745 , 2x washer #500942
FIGURE 106
One end of the upper attachment is
mounted on the radiator frame (image at
right)
FIGURE 107
Bolt the anti-vibration mount onto the
vehicle chassis
FIGURE 108
IS‐19910C
Page 52 / 74
Writer: E L <QF7720959 rev 5>
87. Reinstall all the blue flexible hoses at the CAC
and radiator (at the lower connections of the
cooling pack). Install with the following parts:
A: #21490616 clamp (4x) (torque: 5 lbf-ft)
B: #531471 flexible hose
C: #053617 silicone hose
D: #992089 (4x)
FIGURE 109
88. Reinstall all the blue flexible hoses at the CAC
and radiator (at the upper connections of the
cooling pack). Use the following parts::
A: 1x flex hose #531469
B: 1x silicone hose #053617
C: 4x clamp #21490616 (torque: 5 lbf-ft)
D: 4x clamp #992089
For proper clamp torque, refer to HOSE CLAMP
TORQUE on page 12
FIGURE 110
89. Reinstall the lower cooling pack protector
tube with the following hardware:
4x Screw #502804
4x split lock washer #5001737
FIGURE 111
IS‐19910C
Page 53 / 74
Writer: E L <QF7720959 rev 5>
90. Install the sealing element #050200. Screw it
on the existing threaded holes on the upper
part of the radiator. Secure with the following
hardware:
6x bolt #5001697
6x lock washer #502570
FIGURE 112
FIGURE 113
91. Install the sealing element #050203. Screw it
on the existing threaded holes on the bottom
of the radiator. Secure with the following
hardware:
6x bolt #5001697
6x lock washer #502570
FIGURE 114
92. Prepare the sealing elements #050201 and
#050202. On both parts, apply foam tape
#506040 on the edges as shown on the
image.
FIGURE 115
IS‐19910C
Page 54 / 74
Writer: E L <QF7720959 rev 5>
93. Install the sealing elements #050201 and
#050202. Screw them onto the upper and
lower sealing elements installed at the
previous steps. Secure with the following
hardware:
8x bolt #5001697
8x lock washer #502570
A: #050201
B: #050202
FIGURE 116
94. Cut two pieces of 39 inches (990 mm) long
of rubber extrusion #506025.
95. Using good industrial glue (Loctite 404 or
similar product), glue the two pieces of
rubber extrusion centered on the
reinforcement angles of fan support panel
#050195.
FIGURE 117
FIGURE 118
IS‐19910C
Page 55 / 74
Writer: E L <QF7720959 rev 5>
96. Install the fan support panel #050195.
Secure with the following hardware:
19x bolt #5001697
19x lock washer #502570
FIGURE 119
97. Install the upper left #050204 and upper right
#050206 sealing elements.
Secure with the following hardware:
6x bolt #5001697
6x lock washer #502570
FIGURE 120
98. Install the lower sealing element #050213.
Secure with the following hardware:
5x bolt #5001697
5x lock washer #502570
FIGURE 121
99. Install the L.H. side sealing element
#050208.
Secure with the following hardware:
4 bolts #5001697
4 lock washers #502570
FIGURE 122
IS‐19910C
Page 56 / 74
Writer: E L <QF7720959 rev 5>
100. Install the R.H. side sealing element
#050255.
Secure with the following hardware:
4x bolt #5001697
4x lock washer #502570
FIGURE 123
101. With a paint marker, identify the fans from 1
to 8 with the corresponding number found on
a label on their respective blue connector.
102. Install the fans and fan hand guards on the
panel in the same arrangement shown on
the image. Be sure to place the fan so that
the cable is at the proper location, 3
O’clock, 6 O’clock or 12 O’clock. Refer to the
image at right.
FAN HAND GUARD
Install with the following hardware:
32x bolts #502686
32x lock washers #5001833
Prescribed torque:30 lbf-in
FIGURE 124
IS‐19910C
Page 57 / 74
Writer: E L <QF7720959 rev 5>
103. Snap the fan blue connector in the holes
punches on the panel for that matter.
FIGURE 125
104. Route and secure the fan cables as shown
on the images.
Secure with the following parts:
A= nylon tie mount #504013 + rivet
#504379 + nylon tie #504016
B= nylon tie #504016
Do not tighten the nylon ties at this moment
FIGURE 126
IS‐19910C
Page 58 / 74
Writer: E L <QF7720959 rev 5>
FIGURE 127
105. Install the circuit breaker box #564512.
Install with the following hardware:
4x bolt #500119
4x lock washer #5001868
FIGURE 128
A: 2x bolt #500119 + 2x lock washer #5001868
FIGURE 129
A: 2x bolt #500119 + 2x lock washer #5001868
IS‐19910C
Page 59 / 74
Writer: E L <QF7720959 rev 5>
106. Connect each fan to the corresponding
connection port on the circuit breaker box.
FIGURE 130
107. Tighten the nylon ties previously installed
while routing the fan cables.
108. Use two (2) additional nylon ties #504016 to
secure the extra-length of cables together
close to the circuit breaker box as shown on
the image at right.
FIGURE 131
109. Install the electrical connector cover #
050229.
Fasten with the following hardware:
4x bolt #5001697
4x lock washer #502570
110. Using good industrial glue (Loctite 404 or
similar product), glue three (3) pieces of
rubber extrusion #506025 as shown on the
connector cover.
FIGURE 132
IS‐19910C
Page 60 / 74
Writer: E L <QF7720959 rev 5>
FIGURE 133
111. Complete the installation of the sealing
elements. Screw the panels to the chassis
threaded holes where shown on the image.
Use the following hardware:
22x bolt #502848
FIGURE 134
112. Complete the connection of the cables and
harness to the fan circuit breakers box (three
connectors: gray, black, red).
A: fan drive ground cable (black connector)
B: fan drive power cable (red connector)
C: “fan to RJB interface” harness (gray
connector)
FIGURE 135
IS‐19910C
Page 61 / 74
Writer: E L <QF7720959 rev 5>
113. Secure the fan drive ground cable and the
fan drive power cable connected to the fan
drive circuit breakers box as shown on the
pictures.
A: rivet #504379 (6x) (hole diameter: Ø 13/64)
B:tie mount #504013 (6x)
C:nylon tie #504016 (6x)
D: handcuff nylon tie #N37749 (1x)
FIGURE 136
FIGURE 137
114. Connect the alternator control harness
connector C-ALT3 to connector C-ALT3 of
the “fan to RJB interface” harness. Secure
the extra length of harness as shown with
nylon ties.
A: handcuff nylon tie #N37749 (3x)
B:nylon tie #504016 (4x)
FIGURE 138
FIGURE 139
INSTALLATION OF ELECTRIC COMPONENTS AND HARNESS
CONNECTIONS IN THE MAIN POWER COMPARTMENT
IS‐19910C
Page 62 / 74
Writer: E L <QF7720959 rev 5>
SCHEMATIC DIAGRAM OF ELECTRICAL CABLES & HARNESSES
IS‐19910C
Page 63 / 74
Writer: E L <QF7720959 rev 5>
115. In the battery compartment, disconnect the
battery ground cable from the chassis
ground stud.
116. Most of the electric components will be
installed on the bulkhead at the right of
master relay R1 (when facing it). Identify the
master relay R1 on the image at right.
FIGURE 140
117. If the situation applies to the vehicle on
which you are working on, remove the two
(2) useless studs found on the bulkhead and
then sand to leave a smooth surface.
FIGURE 141
IS‐19910C
Page 64 / 74
Writer: E L <QF7720959 rev 5>
FIGURE 142
118. Make sure this is no voltage at the master
relay R1 posts and then, remove the master
relay R1 cover.
FIGURE 143
119. Disconnect the four (4) cable lugs connected
to the master relay R1 upper post.
120. Momentarily, connect the elbowed lug of the
“master relay R1 to 300A fuse” cable
#23498450.
FIGURE 144
121. Find the best location where to install the
fuse holder #563750 on the bulkhead. Take
note that the fuse holder must be installed at
the distance that allows cable #23498450 to
reach it.
122. Drill two 11/64 pilot holes for the installation
of the fuse holder on the main power
compartment bulkhead. Secure with the
following hardware:
A: tapping screws #500658 (2x) + flat
washer #5001341 (2x)
FIGURE 145
IS‐19910C
Page 65 / 74
Writer: E L <QF7720959 rev 5>
123. Reinstall the four (4) other cable lugs to the
master relay R1 upper post.
Being the largest lug at R1, the cable #23498450
lug should be placed first on the post (behind
all the other lugs) (or second if rubbing is likely
to happen).
Master relay R1- Port 30 – M10-1.5 stud nut
torque: 160-195 lb-in (18-22 Nm)
FIGURE 146: ON THIS PICTURE, CABLE #23498450 LUG IS
IN SECOND (2ND) POSITION BECAUSE IT WAS LIKELY TO
RUB ON THE HEAD OF ONE OF THE FOUR SCREWS.
124. Reinstall the master relay R1 cover.
FIGURE 147
125. Place the 300A fuse #564520 in the fuse
holder underneath the cable lugs.
126. Connect to the free post of the fuse holder
the two (2) following cables that are routed
from the alternator and the fan drive circuit
breakers box:
Fan drive power cable #23498721
L.H. alternator power cable #23524934
A: nut #5001983 (2x)
B: washer #5001341 (2x)
Thread the nuts and tighten to a torque of 96
lbf-in (11Nm).
FIGURE 148: TAKE NOTE THAT THE 300A FUSE IS NOT
PRESENT ON THE PICTURE ABOVE BUT IT SHOULD BE
INSTALLED AT THIS STEP
IS‐19910C
Page 66 / 74
Writer: E L <QF7720959 rev 5>
127. Secure the “fan drive power” cable and the
“L.H. alternator power” cable as shown on
the pictures at right using the following parts:
A: tie mount #509490 (2x)
B: rivet #504610 (2x) (hole diameter: Ø 17/64)
C:nylon tie #509491 (3x)
FIGURE 149
FIGURE 150
128. Install the MCM #23499009-EFD and the
I/O-B module #22722850 on the bulkhead.
Spacing between the I/O-B and the MCM=1
inch
Pilot holes diameter: 11/64”
Install with the following hardware:
Tapping screws #500658,
3x for the MCM
4x for the I/O-B module
FIGURE 151: MAIN POWER COMPARTMENT
IS‐19910C
Page 67 / 74
Writer: E L <QF7720959 rev 5>
129. Depending on the coach configuration, an
existing mounting plate may extend where
the MCM should be installed and cause
interference. If this mounting plate useless,
cut it off along the red line shown on the
image.
IMPORTANT: Do not leave a sharp edge.
Smooth down the edge.
FIGURE 152
130. In the main power compartment, connect the
“fan to RJB interface harness” to the “MCM
to I/O-B interface harness” #23445869 by
means of connector C-EFD1.
131. Connect the MCM and the I/O-B module
together using the “MCM to I/O-B interface
harness” #23445869.
132. Connect the OEL resistors connector RES1F
and RES2F (part #563593) to the “MCM to
I/O-B interface harness”. See the image at
right and the following pictures for reference.
FIGURE 153
IS‐19910C
Page 68 / 74
Writer: E L <QF7720959 rev 5>
FIGURE 154
A:nylon tie #504016 (3x)
FIGURE 155
A:nylon tie #504016 (2x)
FIGURE 156
A:nylon tie #504016 (3x)
B:nylon tie #509491 (2x)
C:swivel mount #504751 (1x)
FIGURE 157
B:nylon tie #509491 (2x)
C:swivel mount #504751 (1x)
IS‐19910C
Page 69 / 74
Writer: E L <QF7720959 rev 5>
133. In the main power compartment, connect the
“vehicle interface harness” #23490553 to
the “MCM to I/O-B interface harness” by
means of connector C-EFD2.
FIGURE 158
134. Connect circuit 24VI, 24VD & GND2 to post
1, 2 & 5 respectively of the junction block.
FIGURE 159
135. Get the J1939 signal. To do so, locate
connector C193 among the existing
harnesses in the main power compartment.
136. Disconnect connector C193 and connect
with C193FS and C193FP of the “vehicle
interface harness” #23490553.
FIGURE 160
IS‐19910C
Page 70 / 74
Writer: E L <QF7720959 rev 5>
137. In the main power compartment, locate I/O-B
module A52 (alternately named AE52).
138. At A52 (or AE52), remove existing circuit 291
and 292 from connector J1:1 (pin 1) and J1:2
(pin 2).
139. For each circuit, cut the terminal and put a
heat shrinking sleeve at the end of the wire.
Those circuits won’t be used anymore.
140. Insert circuit 291 and 292 of the “vehicle
interface harness” #23490553 into
connector J1 pin 1 and J1 pin 2 respectively.
FIGURE 161
141. On the bulkhead, install the alternator
telltale bracket #050303. Fasten to the
bulkhead using two (2) rivets #504379 (hole
diameter: Ø 13/64).
142. Place the alternator telltale insert #391028
in the telltale light module #562113.
143. Connect the appropriate branch of the “fan to
RJB interface harness” to the telltale light
module.
FIGURE 162
FIGURE 163
IS‐19910C
Page 71 / 74
Writer: E L <QF7720959 rev 5>
FIGURE 164
144. There are remaining nylon ties and tie
mounts in the kit. Use them to secure the
harnesses and cables that may seem loose.
The goal is to prevent rubbing of the cables
and harnesses.
FIGURE 165
145. Install one (1) warning decal #069205 as
shown on the image.
FIGURE 166
IS‐19910C
Page 72 / 74
Writer: E L <QF7720959 rev 5>
146. Install a second warning decal #069205 as
shown on the radiator door.
FIGURE 167
147. Fasten the radiator door upper arm
assembly.
FIGURE 168
148. Refill the cooling system. Connect coolant
extractor. Use coolant extractor to refill the
coolant from the engine.
FIGURE 169
IS‐19910C
Page 73 / 74
Writer: E L <QF7720959 rev 5>
149. Reinstall the rear bumper.
FIGURE 170
150. Reinstall the access panel located behind
tag axle L.H. side wheel.
FIGURE 171
151. Reinstall L.H. side rear fender.
FIGURE 172
IS‐19910C
Page 74 / 74
Writer: E L <QF7720959 rev 5>
152. In the battery compartment, connect the
battery ground cable to the chassis ground
stud.
FIGURE 173
153. In the main power compartment, set the
battery master switch to the ON position.
154. Set the ignition switch to the ON position.
155. In the main power compartment, reset the
circuit breakers and wait two (2) minutes for
the new installer I/O-B module to be
programed.
SYSTEM TEST
156. Start the engine to idle.
157. With the engine in idle (600 rpm), use the
Diagnostics menu of the Driver Information Display
to engage the fans in speed 1.
Diagnostics > Vehicle Tests > Activate Radiator FAN Speed 1
The height (8) fans should run at 50% of the maximum
speed. You need to evaluate the sound level and the
power of the air stream to determine the speed.
158. Engage the fans in speed 2.
Diagnostics > Vehicle Tests > Activate Radiator FAN Speed 2
The eight (8) fans should run at 75% of the maximum
speed.
159. Set the engine to the fast idle, the fans should then
engage at 100% of the maximum speed.
160. If the fans behave in accordance with the criterions
of the previous steps, then they operate normally.
PARTS / WASTE DISPOSAL
Discard waste according to applicable environmental regulations (Municipal/State[Prov.]/
Federal)
IS-19910C
June 27, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10161727
https://static.nhtsa.gov/odi/tsbs/2019/MC-10161727-0002.pdf
“This site contains affiliate links for which OEMDTC may be compensated” |
- 【More Powerful Booster】: With a 1500A peak current, the Q10S car jump starter can start the 12V vehicles up to 7.0L Gas/5.5L Diesel engines . The battery starter is equipped with a high-performance force start function that helps you start depleted car batteries. even in extreme temperatures, The powerful lithium battery booster - up to 20 jump starts on a single charge . Suitable for car, truck, motorcycle, boat, RV or tractor and so on.
- 【Upgraded Protections】: Safe and easy-to-use jump starter battery pack without the worry of incorrect connections or sparks. Particularly spark-proof, reverse polarity protection, low-temperature protection, high-temperature protection, over-load protection. Safely connect to any 12-volt automotive car battery. The car battery jump box/jump cable indicator notifies you of incorrect use with an audible buzz and flashing lights.
- 【A Backup Power Pack】: Q10S Car Starter designed with 2 USB outputs (5V/3A)and (5V/2.1A), the quick charge 3.0 USB port can fully charge your cellphones, tablets, and other mobile devices at the fastest (up to 75% faster than a standard charger). And can power your other car accessories by using a 12V-16V/10A DC port. like tire inflators, inverters, and more.
- 【LED Flashlight 】: The battery starter has 3 LED lights modes: Flash Light, Strobe Light, and SOS Light. This multi-purpose flashlight and which comes in handy in case of an emergency and outdoor adventures.
- 【What You Get】: Portable Lithium Car Battery Jump Starter x1, Smart Jump Cable x1, USB Type-C Charging Cable x1, User Manual x1. 2-Years Technical Support. Please feel free to contact us for help if any questions.
- 【START COMPLETELY DEAD BATTERIES】Powerful and safe to instantly start your completely dead or low-voltage car battery. 5000A cranking current car jump starter especially for all gas/10.0L diesel engines even at -4~140℉. With about 24-month standby time and more than 1000+ recharge cycles, the car battery jump starter always ready to help.
- 【MULTI-PURPOSE QUICK BATTERY CHARGER】Massive 26800mAh jump starter battery pack with German latest chip, has 2 quick USB ports with included EC5 cigarette lighter adapter for charging wide variety of electronic or 12V DC devices like smartphones, tire pumps, car refrigerators.
- 【MORE THAN A JUMP STARTER】400 lumen large bright light with 270° wide angle irradiation and luminous area 7 times larger than traditional battery jumper starter portable. 3 modes for different emergency, also working as warning triangle. Compass integrated. Bring you sense of safety:)
- 【SMART LARGE DISPLAY】3.2-inch LCD smart screen with user-friendly backlight setting, makes it easy to read even in outdoor sunlight. Provides battery level, operational status and possible errors of this battery jump box at a glance.
- 【REMARKABLE MULTI-PROTECTION】With certified 10 intelligent protections system and upgraded heavy-duty jumper cables kit for car, this car battery charger jump starter free you from malfunction concerns like short circuits or sparks. Use it to jump start your car confidently!
- Start Dead Batteries - Safely jump start a dead battery in seconds with this compact, yet powerful, 1000-amp lithium battery jump starter - up to 20 jump starts on a single charge - and rated for gasoline engines up to 6.0-liters and diesel engines up to 3.0-liters.
- UltraSafe - Safe and easy-to-use car jumper starter and jump pack without worrying about incorrect connections or sparks. Safely connect to any 12-volt vehicle with our mistake-proof design featuring spark-proof technology and reverse polarity protection.
- Multi-Function - It's a car jump starter, portable power bank, and LED flashlight. Recharge smartphones, tablets, and other USB devices. It's easily rechargeable from any powered USB port in 3-hours at 2.1-amps. Plus, an integrated 100-lumen LED flashlight with seven light modes, including emergency strobe and SOS.
- Advanced Design - Our most advanced car battery charger jump starter ever. Featuring high-discharge lithium technology for safe operation in any climate. A rugged and water-resistant enclosure rated at IP65. A rubberized over-molded casing to prevent scratching or marring of surfaces. And an ultra-compact and lightweight design weighing just 2.4 pounds.
- In The Box - GB40 UltraSafe Portable Car Jump Starter, Heavy Duty Booster Clamps, 12-Volt Car Charger, Micro USB Charging Cable, Microfiber Storage Bag, User Guide, 1-Year Warranty, and Designed in the USA.
- Powerful Boost: The IDEAPLAY J10 jump start battery pack features a 2000A peak current perfect for starting up 12V gas (up to 9L) or diesel engines (up to 7L). An excellent choice for emergency situations, this jump starter for car works in extreme temperatures, ensuring up to 20 boosts per charge!
- Superior Protection: This battery pack charger portable comes with smart clamps which ensure full protection against short circuit, accidental spark, over current, over load, over voltage and reverse charge, ensuring a safe and user-friendly battery boost experience.
- 2 USB Outputs: Unlike similar products on the market, these jump starters battery jumper has 2 USB outputs and a LED digital display, supporting USB-C fast charging. This device can also be used to charge your smartphone, tablet or other USB powered electronics!
- LED Flashlight: The IDEAPLAY portable battery jump starter for car is equipped with a powerful LED flashlight with multiple working modes including continuous, SOS strobe or flash mode. An excellent choice as a rescue light, camping, night walks or as a household lighting in case of emergency!
- Versatile Uses: This battery charger car jump starter has wide applications and can be used to give a battery boost to your SUV, motorcycle, truck, sports car or vehicle, coming in handy for a variety of situations and safely starting your vehicle in seconds without the usual hassle.
- 1,700 Peak Amps; 425 Cranking Amps
- Clore PROFORMER Battery Technology
- 68" 2 AWG Welding Cable Leads
- Heavy Duty Powerjaw Clamps
- Built-in 3A Automatic Charger
- Powerful And Reliable Car Jump Starter - The 4000 amp jump starter battery pack can quickly jump start a dead car battery. Even if the battery voltage is too low, pressing the "BOOST" button will force the car to restart. The GOOLOO car battery charger jump starter can start all gasoline engines and diesel engines up to 10.0L in just a few seconds. This includes 12v vehicles, motorcycles, pickup trucks, RVs, tractors, trucks, cargo vans, ATVs, snowmobiles, yachts and many more.
- High Capacity Portable Charger - The GP4000 portable car battery jump starter is equipped with dual USB charging output ports (one supports fast charging) and a USB Type-C charging port (5V/3A). You can use it to charge other devices or recharge the Jump Starter itself. It can be taken anywhere and can quickly charge numerous portable devices, such as smartphones, tablets, cameras, GPS systems, and more.
- Emergency Life Saver – The GOOLOO GP4000 portable car battery jump starter can jump start vehicles in a matter of seconds so that you aren’t stranded and unsafe for longer than needed. A full charge can boost most vehicles over 60 times!
- Safety & Quality Metal Clamps - The GOOLOO battery jump starter built-in 10 types of protection, free your worries of misuse and sparks. We wanted to make sure our users feel 100% safe when using our product. The Smart Jumper Cables is constructed with all-metal clamps to prevent damage caused by long-term use.
- Rugged 12V Car Jump Starter - The hardened plastic and rubber corners make sure the starter can withstand drops without any problem. A built-in flashlight can assist you in vehicle emergencies at night.
- START YOUR CAR BATTERY WITH AVAPOW A27 JUMP STARTER - This powerful and safe jump starter can start your car battery with ease. With 2500A peak currents, it is perfect for vehicles up to 8.0L gas or 8.0L diesel engines. You can enjoy up to 45 jump starts on a single charge.
- SECURE CLAMP DESIGN - The smart clamp design of this jump starter ensures your safety. The cable of the AVAPOW jump starter has eight protection functions, including spark-proof technology. It will not cause sparks even when connected incorrectly. The beep and flashing light design will notify you of any safety issues with the clamp.
- WIRELESS CHARGING STATION DESIGN - The AVAPOW A27 jump starter also features a wireless charging station design that can deliver up to 5W/7.5W/10W MAX of power. This feature makes your life more convenient.
- MULTIPLE FUNCTIONS - The AVAPOW A27 car starter has 2USB QC3.0 (USB1: 5V/3A 9V/2A 12V/1.5A USB2: 5V/2.1A) and 1 TYPE-C. With a variety of functions, it can charge different devices.
- IP65 WATERPROOF AND DUSTPROOF DESIGN - The AVAPOW Car Battery Starter is designed with reliability in mind. Its IP65 waterproof and dust proof design prevents damage from external shocks, rain, and dust, making it suitable for various complex work scenarios.
- Powerful Car Jumper Starter - The Scatach 011 jump starter with 3000A peak, safely start the 12V vehicles in seconds with this booster(up to 9.0L gasoline/7.0L diesel engines), up to 50 jump starts on a single charge. It is suitable for cars, trucks, motorcycles, boats, rvs, tractors, lawnmowers, snowmobiles, etc.
- Advanced Safety Features - Easy to opearte, and Safely connect to any 12-volt vehicle with intelligent protection systems design, with multiple protection including spark-proof, reverse polarity protection, low-temperature protection, high-temperature protection, over-load protection, jump pack without worrying about incorrect connections or sparks even if you're a novice.
- Portable Design - This portable car battery charger very compact design, size is only the size of an ordinary power bank (Size: 8.7"*4.6"*4" , Weight: 1.9lbs). It is very convenient to carry, won't take up much space when you go on a long drive or travel.
- Respond to Emergencies - Portable power bank with led flashlight. It can provide emergency charging for your powered-off mobile devices through the usb interface. The unique led flashlight has 3 modes, including flash light, strobe light and sos light, which will help you in time when you encounter an emergency situation outdoors.
- What will you Get ? - Scatach 011 Car Starter Jumper Power Bank X1, Smart Jump Cable X1, Usb Type-C Charging Cable X1, User Manual X1, Storage Case x1, 2 - years technical support. If you need any help, please contact us in time.
- 【START COMPLETELY DEAD BATTERIES 】The car battery jump starter has up to 4000A peak current with Dual Start Guarantee to instantly start 12V stranded vehicles (up to all gas/10L diesel), including completely dead batteries, even in extreme weather at -20°C, and supports 1000+ charging cycles. Easier than getting help from another car or roadside service!
- 【MULTI-PURPOSE QUICK BATTERY CHARGER】This car jumper starter portable with a massive 23,800mAh capacity. With 2 USB outputs, you can quickly charge 2 devices at the same time such as smartphones, tablets, cameras, etc. The included DC cigarette lighter adapter can power 12V DC devices such as handheld vacuum cleaners, car tire pumps, and more.
- 【MORE THAN A JUMP STARTER】The jumper cables with battery pack features super bright lights in 4 modes (Flashlight, Strobe(White), Strobe(Orange), SOS). Suitable for changing tires or checking the engine, for warning or drawing attention, outdoor adventure, traffic accidents or doubling as a warning triangle and many other use scenarios. Make your journey safer.
- 【Advanced Large Display】The 5'' LCD body features an integrated screen design that allows you to easily monitor the operating status and power level of the car battery charger . The stylish and compact design of the battery jumper starter allows you to carry it with you wherever you go. Metallic edges for added durability and a rugged housing to protect the jumper from rain, dust and drops.
- 【MULTIPLE SAFETY PROTECTIONS】Built-in German imported smart chip, the jump box for car battery will automatically perform 10 protections such as short circuit, overheating, overvoltage, overcharging, deep discharge, overcurrent and reverse current. Reliable partner of the vehicle. Hit the road quickly and inexpensively with peace of mind.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.