Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Mack

Ad Blocker Detected

Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker.

NHTSA ID Number: 10161914

Manufacturer Communication Number: K42065042

Summary

Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Post-Facelift Vehicles, Model Year 2018 And Newer

 

11 Affected Products

Vehicles

MAKE MODEL YEAR
MACK ANTHEM (AN) 2018-2020
MACK CHU 2018
MACK CXU 2018
MACK GRANITE (GR) 2019-2020
MACK GU 2018
MACK PINNACLE (PI) 2018-2020

Solution K42065042

Monday, June 3, 2019 7:06:16 PM CEST

** SOLUTION **

Title Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Post-Facelift Vehicles, Model Year 2018 And Newer
Mack Models
Mack Model AN - Anthem, CHU - Pinnacle, Axle back, CXU - Pinnacle, Axle front,  GR - Granite, GU - Granite, PI - Pinnacle
Volvo Models
Volvo Model VNL, VNM, VNR, VNX, VAH, VHD
Engine family
Engine family 11L Engine, 13L Engine, MP7 MP8
** SOLUTION **
Cause In post-facelift trucks the Preheat Icon may not illuminate during engine preheat operation, providing no indication to the driver that the function is active.

The icon may not illuminate due to a parameter missing from the Instrument Cluster (IC) module.

Solution If the Preheat Icon does not illuminate while Engine Preheat is active as shown below:

  1. Update Instrument Cluster Software (SW) to enable the parameter.
    1. In Premium Tech Tool (PTT), run Operation 1700-22-03-06 Accessory Kit. The operation can be found under the Program tab.
    2. When prompted, enter Accessory Kit Number 85153771.
    3. Press the Program button in the lower right-hand corner of the screen.
    4. Allow the programming operation to complete.
  2. Set Vehicle (System) Date And Time.
    1. Run PTT Operation 1700-22-03-02 System Date and Time. The operation can be found under the Program tab.
    2. More information can be found in CBR Solution K11533602.
Solution visibility Dealer distribution
Function(s)/component(s) affected
Function affected 18 1 0 IC,  MID 140 – IC04 / IC05  Intake pre-heater
Function Group
Function Group 381 combined instrument
Customer effect
Main customer effect calibration/programming/pairing/missing operation, visual appearance
Visual appearance part lost/missing function
Conditions
Vehicle operating mode when activating
Frequency of occurrence of problem always
Engine temperature cold
Administration
Author A241298
Dealer ID A241298
Last modified by RU4469V
Creation date 24-07-2018 16:07
Date of last update 28-05-2019 17:05
Status Published

Solution K42065042
Monday, June 3, 2019 7:06:16 PM CEST

https://www.nhtsa.gov/recalls?nhtsaId=10161914

https://static.nhtsa.gov/odi/tsbs/2019/MC-10161914-9999.pdf

Download (PDF, 21KB)


 

Truck Diagnostic


VXDAS Truck Diagnostic Scanner j1939 Heavy Duty Diesel Truck Scanner 9 Pin Xtuner CVD J1708 Bluetooth OBD2 Android Scan Tool for School Bus Motorhomes Motor Coaches Season

Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Mack 1

Tuirel Heavy Truck Bluetooth Scanner J1939/J1708 CVD-9 9-Pin Heavy Duty Truck Scanner for MAN, CUMMINS, CAT, Scania, UD, DAF, BENZ, VOLVO etc

Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Mack 1

XTOOL HD900 CAN Bus Engine Code Reader Heavy Duty Truck Diesel Scanner OBDII Diagnostic Tool Work for J1587 J1708 and J1939 Protocols

Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Mack 1

Heavy Duty Truck Scan Tool NL102 Plus Auto Scanner with DPF/ Sensor Calibration / Oil Reset + Check Engine for Cars; Truck & Car 2 In 1 Code Reader (NL102 Plus)

Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Mack 1

XTUNER T1 Professional Heavy Duty Truck Diagnostic Scan ToolDiesel OBD Truck Diagnostic Tool for Cummins for HINO FUSO ISUZU Multiple Trucks ABS Brake All Systems


Autel Maxisys MS908CV Commercial Vehicle Diagnostic Scanner Scan Tool Specialized for Heavy Duty with J2534 ECU Coding & Programming

Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Mack 1

 


Heavy Duty Commercial Truck Reprogramming

USB-Link 2 (Wi-Fi)
Product Number USBLINK2WF
NEXIQ Technologies Vehicle Interface Utility
Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Mack 1

 

Description:

The USB-Link 2, the next generation vehicle interface from NEXIQ Technologies, has arrived.

Dependable and rugged, the new USB-Link 2 is five times faster than its predecessor. It has sixteen times more random access memory than the old USB-Link, and it supports heavier bus loads on simultaneous channels. For even more reliability, we’ve upgraded the USB connector to a more robust, automotive grade connector with a latching mechanism. The USB-Link 2 is compatible with a wide range of OEM software applications.

 

Vehicle Network Protocol Support

  • CAN / J1939 / ISO15765 – 250K, 500 K, 1M b/s with Auto Baud detection (3 channels)
  • Single wire CAN (SWCAN)
  • ISO 11898-3 Fault Tolerant CAN (FTCAN)
  • J1708
  • J1850 VPW (Class 2)
  • J1850 PWM (SCP)
  • ISO 9141 / KWP2000 (ISO 14230) K/L line
  • ALDL 9600 and 8192 baud
  • ATEC 160 baud

 

Operating System Support

  • Windows Vehicle Communication API
    • RP1210 a/b/c
    • J2534 (2004 draft)
    • J2534-1 partial implementation (commercial vehicle-focused)
  • PC Operating System Compatibility
    • Windows XP SP3
    • Windows 7 (32 & 64 bit)
    • Windows 8 (32 & 64 bit)
  • Interfaces to Computing Platforms
    • USB 2.0
    • Wi-Fi (dual band)

 

Nexiq USB-Link 2 Kit Includes:

  • NEXIQ USB-Link 2
  • 6-pin/9-pin Deutsch adapter
  • Latching USB cable

Nexiq Blue-Link Mini
Product Number NQ126015
Nexiq Blue Link Mini™ Vehicle Communication Interface

 

Use Your Mobile Device To Make The Connection!

The Blue-Link Mini is not a supported device for use with DiagnosticLink. For complete details regarding DiagnosticLink, please login with your SSO ID.

The NEXIQ Blue-Link Mini enables you to use either your iOS or Android devices (e.g., smartphones or tablets) to communicate with heavy duty vehicles for quick access to basic diagnostic information. It plugs into the vehicle’s diagnostic connector, and provides wireless communication with on-board electronic control units.

If you are a driver, a service writer, or a service technician using the Blue-Link Mini as a triage tool, wireless vehicle communication was never easier.

NEXIQ Technologies is currently working with the American Trucking Association’s Technology and Maintenance Council (TMC) to develop a standardized communication protocol for mobile devices. This standard will make developing applications for the Blue-Link Mini a straightforward task.

 

Benefits

  • Inexpensive
  • Convenient
  • Small—fits in your pocket
  • Wireless—no cables required
  • Reliable Bluetooth communication
  • Fast—lets you quickly gather a snapshot of vehicle statistics

 

Features

  • Compatible with iOS and Android devices (pairs easily with both)
  • Integrated 9-pin Deutsch connector
  • Simple, one-button design to put the device in Discovery mode
  • When paired with an iOS or Android application (e.g., DTNA eLink), provides quick access to:
    • Fault codes
    • Basic parameters
    • Vehicle specs
    • Fuel level
    • etc.

Note: For more information on DTNA-eLink, see the Mobile App tab below.

 

Vehicle Network Protocol Support

  • J1708
  • 3 CAN Channels (CAN / J1939 / SO15765 -250K, 500K, 1Mb/s with Auto Baud detection)

Nexiq 125032 USB Link + Software Diesel Truck Diagnose Inter

Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Mack 1

NEXIQ Technologies 124032 USB-Link 2 Connector

Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Mack 1

Genuine Dearborn Protocol Adapter (DPA 5) Kit from DG Technologies


DrewLinQ Heavy Duty Commercial Truck J1939 J1708 Adapter Tool

Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Mack 1

Dearborn DPA5 Pro Universal RP1210 Protocol Adapter

Engine Preheat Icon Does Not Illuminate In The Instrument Cluster (IC) During Engine Pre-heat (Intake Air Heater) Operation - Mack 1

 


Daimler Truck

Sterling 360:

http://www.stl360techinfo.com/Order1.asp

For Detroit PSL:

https://ddcsn-ddc.freightliner.com/cps/rde/xchg/ddcsn/hs/psl_subscribe.htm

DiagnosticLink Order Site:

DiagnosticLink Direct Link:

https://diagnosticlink.nexiq.com/DTNA/Default.aspx

DiagnosticLink Through Access Freightliner:

http://www.accessfreightliner.com


 

SaleBestseller No. 1
Heavy Duty Truck Scan Tool NL102 Plus Auto Scanner with DPF/Sensor Calibration/Oil Reset + Check Engine for Cars; Truck & Car 2 in 1 Code Reader (Upgrade Version)
  • NL102PLUS HEAVY DUTY diagnostic scanner from NEXAS supports all heavy duty trucks in compliance with standard protocols ( J1587,J1939 and J1708 Class 4- class 8 trucks). And also engine check diagnostic for all passenger cars & light duty vehicles from 1996 on.
  • Trucks appliance: for Cummings, for Detroit, for Maxxforce, for Caterpillar, for Freightliner, for International, for Kenworth, for John Deere, for Peterbilt, for Sterling, for Mack, for Paccar, for Westernstar, for Mecedes Benz, for Volvo, for Scania, for Man, for Renault, for ERF, for Foden, for Seddon-Atkinson, for Iveco, for DAF, for SISU, for STEYR, for ISUZU; and all Cars /min vans / light duty from 1996.
  • DPF Regeneration And Oil Service Reset: Force DPF regen for Cummings, Detroit, Maxxforce, ISUZU, and HINO from 2010 till now . Oil service reset for Cummings, Detroit, Maxxforce from 2010 till now . (Note: Water Temperature is higher than 80 Degree and engine at idle speed for at least 10 minutes. )
  • Supported Truck Systems: engine, transmission, instrument panel, drivetrain, braking system, suspension, ABS, ESP, EPS, fuel system and more, which are in compliance with J1939, J1708 and J1587 protocols. Generally for American HD trucks ( Class4-Class8) are from 2006 on.
  • FREE UPDATE & EXCELLENT SERVICE----2. 8 inch TFT color screen design and user friendly software interface guide you to operate it as easy as pie. We provide one year & lifetime free software online update and professional service team for your any questions within 24 hours.
SaleBestseller No. 2
NEXAS Heavy Duty Truck Scanner NL102 OBD/EOBD+HDOBD Diagnostic Scanner Scan Tools Engine ABS Transmission Check Trucks & Cars 2 In 1 Codes Reader
  • Warm Remind----As heavy duty trucks’s structure is complex, so we need pay more attention to confirm its compatibility. Please contact us first if you are not sure whether it can work on your trucks.
  • Support Multiple Systems----Engine, Transmission, Instrument Panel, Drivetrain, Braking System, Suspension, ABS, ESP, EPS, Fuel System and etc. You can get real time data related to system and do some repair by yourself using this truck tool, which will save much time and money.
  • Wide Converage----It is a 2 in 1 Trucks & Car Diagnositc Tools,which support all heavy duty trucks(J1587, J1939 and J1708) and all OBD2 standard protocols. Not only can work on Freightliner, Kenworth, Mack, International, Sterling, Paccar, Peterbilt, Caterpillar, Western Star, Mercedes-Benz, Man, Scania, VOLVO, Renault, Erf, Foden, Seddon-Atikinson, Iveco, Daf, Sisu, Steyr, ISUZU, Hino and more diesel trucks; but also can support all cars, mini vans and light duty vehicles from 1996 on and latest.
  • Battery Power Monitor + One Key Help----If the battery voltage is less than 11. 8v, it shows you start engine over to 1500rpm and charge the battery, if it is less than 10. 8v, show stop the testing and check the battery. As for "?" Button, please press "?" button directly when a question mark "?" show on the screen, you will get the explanation.
  • HD OBD+OBDII Diagnosing----It can Read /Clear codes, View live data in a text or graphic format for trucks. Like other Proffesional codes reader, it can read codes, erase codes, I/M Readness, Live data, EVAP Test, O2 sensor Test. . . etc for cars. We provide two years , so it is no risk to purchase it.
Bestseller No. 3
KZYEE KC601 Heavy Duty Scan Tool, HD Truck Diagnostic Scanner Transmission DPF Code Reader/Eraser with Live Data/ECU Info for J1587/J1708 J1939 Class 8 Diesel Trucks
  • Packed with top-notch features such as reading and erasing generic codes on engine, transmission, body controller, chassis control, cruise control, ABS, instrument cluster, etc. Displaying DTCs definition, showing live data, vehicle information and ECU information.
  • Detailed Vehicle Information is able to be get, such as: Engine Speed, Total Idle Hours/ Fuel Used, Average Fuel Economy, Total Vehicle hours, Total Vehicle Distance, Total PTO Hours, Total Engine Revolutions, and so on.
  • A a great deal for class 8 diesel trucks and engines whoever are supported by J1939 or J1587/J1708. Covers most ECU like Cummins, Detroit, Caterpillar, Freightliner, International, Kenworth, John Deere, Peterbilt, Sterling, Mack, Mecedes Benz, VOLVO, etc.
  • Powered supply afforded directly by vehicles, comes with both a 6-pin and a 9-pin cable for maximum vehicle compatibility, and a micro USB cahle for update via the Internet.
  • We stand behind KYZEE products 100% and guarantee 2 YEARS warranty and support life-time free software update. (Attention, it CAN NOT be updated on MAC SYSTEM !!!)Anything occurs, feel free to contact us, all messages will be replied within 24 hrs
Bestseller No. 4
VIDENT iEasy320HD Heavy Duty Truck OBD2 Scanner with Check Engine, Transmission, Brake, Fuel Scan Tool for Heavy Duty Trucks & Cars 2 in 1 OBDII Code Reader
  • VIDENT iEasy320HD is specially developed for heavy duty vehicles(Diesel) and passenger cars(Gasoline or Petrol), which enables users to read DTCs, clear DTCs and view the datastream with a live color graphing. It covers a wide range of vehicles since it offers multiple data bus protocols, such as J1587, J1939, J1850VPW, J1850PWM, ISO9141, KWP2000(ISO14230-4) and CAN(Control Area Network ISO15765-4).
  • Multiple Systems: Engine,Transmission, Instrument Panel, Drivetrain, Braking System, Suspension, ABS, ESP, EPS, Fuel System and etc. You can get real time data related to system and do some repair by yourself using this truck tool, which will save much time and money.
  • Wide Coverage: iEasy320HD is a 2 in 1 heavy duty trucks & cars diagnostic scan tool, which cover all vehicle 1996 and newer. Not only can work on Freightliner, Kenworth, Mack, International, Sterling, Paccar, Peterbilt, Caterpillar, Western Star, Mercedes-Benz, Man, Scania, VOLVO, Renault, Erf, Foden, Seddon-Atikinson, Iveco, Daf, Sisu, Steyr, ISUZU, Hino and more diesel HD trucks, but also can support all cars, mini vans and light duty vehicles.
  • I/M Readiness(Smog Check): Red-Yellow-Green LEDs and build-in speaker indicate emissions monitor status. Clearly shows whether the emission-related systems are operating properly or ready for inspection and maintenance testing, turns off the MIL(check engine light) and resets monitors; views freeze frame data, read live PCM data stream, EVAP system test data, On-Board Monitor test data and display live O2 sensor test data. They can also help catch intermittent problems or confirm repairs during
  • Multiple Language: Support English, French, German, Spanish & Russian. Lifetime free software upgrade.
Bestseller No. 5
LAUNCH CReader HD Plus Heavy Duty Truck Obd2 Diagnostic Reader OBDII Scan Tool CRHD Truck Code Scanner with OBD-II Communication Modes 1-10 and J1587, J1708 and J1939 protocols
  • 【HDOBD+OBDII】 LAUNCH CR-HD professional heavy duty truck scan tool will work on J1587, J1708 and J1939 Protocols trucks. Covers class 4 (14,001 lbs) through class 8 (33,000 lbs and over) heavy duty trucks.It does not only work on heavy duty trucks, but also work on 1996 US-Based, 2000 EU-Based and 2005 Asian-based cars,light duty trucks (12V only) and newer OBD II & CAN domestic or import vehicles.
  • 【Multisystem Diagnostics】This HDOBD truck code reader will read or clear fault codes on engine, transmission, brake, instrument panel, vehicle management, fuel system, cab climate and particulate control unit, show the live data in text and graph.
  • 【Wide Coverage】For Freightliner,Kenworth,Mack,International,Sterling,Paccar,Peterbilt,Caterpillar,Western Star after 2006,For Mercedez-Benz,MAN,Scania,Volvo,Renault,ERF,Foden,Seddon-Atikinson,Iveco,DAF,Sisu, Steyr, Isuzu,Hino after 2012, and all Cars /min vans / light duty from 1996.
  • 【Fast and Accuracy】Rapidly communicates to the cars or heavy duty trucks, reads monitor status and identify OBD II communication protocol in 5 seconds. Instantly read and clear error codes,displays the codes definition on the screen,shows data stream and freeze fame,does O2/EVAP/On-board system test.
  • 【Humanized Design】Applied 2.8" color LCD with friendly interface,help you more intuitive and better diagnosis. Equipped with 6PIN, 9PIN, and 16PIN diagnostic connectors, which can provide highest quality, most efficient, and most professional diagnostic service.
Bestseller No. 6
Autel MaxiCOM MK808 OBD2 Diagnostic Scan Tool with All System and Service Functions including Oil Reset, EPB, BMS, SAS, DPF, TPMS and IMMO (MD802+MaxiCheck Pro)
  • 【MULTIFUNCTIONAL SCAN TOOL】 Once accessed to the Diagnostics service of MaxiCOM MK808 scan tool, here are a variety of functions available including oil reset and EPB/BMS/SAS/ DPF, Basic TPMS service(MK808 could not program tire sensor), which are used for the safety and efficient maintenance of systems.
  • 【FULL SYSTEM DIAGNOSES】 With so many special services, the full system diagnosed will not absent. This diagnostic tool will give your car a full detection for ALL systems (ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System . etc. ).
  • 【WIDE VEHICLE COVERAGE】 Autel MaxiCOM MK808 code reader works on most 1996 US-based, 2000 EU-based and newer vehicles to do the full systems diagnoses including reading/clearing codes and viewing live data to check the health status of parts.To check wheather MK808 is compatible with your car or ask other questions, please send VIN number [email protected]
  • 【USER-FRIENDLY】 This is a tablet diagnostic scanner with 7"touchable screen and enables sensitive response with fast quad-core process; it is better than Autel md808/md808 pro and MX808. Compare with MK808BT, MK808 just without the VCI, but use cable connection could provided the quick and stable diagnosis speed.
  • 【Please Be Informed】 12-month warranty and 1year free online update are offered for you, if you don’t like it, you can just return it back. Note:MK808 is compatible with most of vehicle makes, but in order to make sure MK808 can run super smoothly on your car, please send VIN number to [email protected] or ask through Q/A. We will definitely answer your question asap.We also welcome you to consult us specific service functions that you want to use with MK808.
Bestseller No. 7
Tuirel Heavy Truck Bluetooth Scanner J1939/J1708 CVD-9 9-Pin Heavy Duty Truck Scanner for Man, Cummins, CAT, Scania, UD, DAF, Benz, Volvo etc
  • The Bluetooth XTUNER CVD-9 Heavy Duty Scanner is the China' first commercial vehicle diagnostic adapter based on Android. CVD-9 is an electronic device that connects to the on-board ECU computers of truck, fire engine and motorhome, then transmits information via Bluetooth to the XTUNER CVD application
  • CVD-9 Support J1708 and J1939 protocol, which for vehicle after 2000 year
  • Professional analysis software for data stream wave form, can analyze 4 data streams at the same time. By overlaying and comparing forms, customers can easily and immediately find the vehicle fault
  • XTuner CVD-9/CVD-6 works with Android 4.4 or above smart phone,it does not works with iPhone or iOS system device, connect via Bluetooth, display 99% of Heavy-Duty fault codes with detailed descriptions on the OEM level component and trailer
  • I/M Monitor: Fast detection for status of all auto sensors to make sure its condition.
Bestseller No. 8
XTUNER T1 Heavy Duty Truck Diagnostic Tool Auto Intelligent Diesel OBD Scanner Support WIFI
  • XTUNER T1 has extensive vehicle coverage for heavy-duty trucks like Allison, Astra, Benz, Bremach, Caterpillar, DAF, Detroit, ERF, Foton, Freightliner, Hino, Hyundai, International, ISUZU, Iveco, Mack, MAN, Navistar, Diesel OBD, Renault, Scania, Toyota, UD, Volvo, Wabco; Support electronic system like Bendix, Cummins
  • Complete function including DTC, DTC freeze Info, Live data, Actuation test and Special function;Support standard protocol J1939, J1708 and J1587; Software download link:http://www.idutex.com/html-e/support.html
  • Newest Update:MAN V12.1->12.2 !!! 1.Add Divided by the Vehicle->TG-X System:Wabco ESAC,PTM,ASTRONIC ZF,Air-conditioning/Auxiliary air-conditionong/Heating,Instrumentation Stoneridge Electronics,CBR II Wabco,Universal mobile phone preparation(UHV)FWD,Door module TRW,Multi Media System. 2.Add Divided by the System:Multi Media System. TOYOTA V12.2:Update the diagnostic database for all models of North America, Europe, Asia, Japan, other support to 2016
  • Add New Brand: Ford!!! Vehicle Covered up to 2017! VOLVO 12.2 EN release! 1. Fix commucation error. Add 35 new modules. 3. Add system scanning and DTC Freeze. XTUNER T1 support communication via USB or WIFI connection for the VCI; Software support update online for free; Operation System: Windows XP, Windows 7, Windows 8, Windows 10, which allows for more stable performance, better compatibility and expandability
  • The built-in overvoltage protection module is able to protect scanner and vehicle against accidental damage during checking; Work stably and smoothly in high and low temperature environment. Please feel free to contact us if you have any technical question, our engineer will support online
Bestseller No. 9
iCarsoft Heavy Duty Diagnostic Tool Scanner HD I for GMC Chevrolet Cummins Peterbilt Caterpillar and more
  • The HD I is a powerful Code Reader for both heavy duty and car, it can work on all the vehicles which are equipped with HD-OBD and OBDII
  • The HD I for Heavy Duty Diagnostic Tool is the perfect tool for diagnosing and clearing heavy duty diagnostic trouble codes. The Heavy Duty Diagnostic Tool HD I will work on ANY gas/diesel heavy truck that complies with the Heavy Duty Standard Protocol. Almost all heavy trucks sold in the USA comply to this standard
  • It covers J1587, J1708 and J1939 protocols, for accessing Engine, Transmission, Brakes and more
  • For the car, it covers CAN, KWP, J1850 and ISO protocols, for accessing general OBDII powertrain systems
  • It features a 2.8" full color LCD display and is ergonomic, highly portable and easy to use
Bestseller No. 10
FCAR F506 heavy duty truck scanner Enhanced HD diesel scanner diagnostic tools with Engine/ABS/VCS/EBS/SRS/Suspension/Battery/Cluth Transmission Check Trucks & Cars 2 in 1 Codes Reader[Newest Version]
  • ➤【ALL FUNCTIONS IN YOUR HAND】This truck scanner is capable of reading and clearing trouble codes of all major systems of truck , including engine, airbag, transmission,ECU/BCU,VCS,ABS,SRS,EBS,DCU,AT, cluth system/brake system/meter system/battery system/inverter system/hybrid system/immobilizer system,ect. Special Functions perform various component adaptations of the control module under test, allowing you to calibrate or configure certain components after making repairs or replacements.
  • ➤【ADVANCED FEATURES FOR TRUCK】Graph live data :Engine speed,Engine ECU temperature,Percent acceleration pedal position,Engine intercooler temperature,Engine coolant temperature,Battery voltage,Alternator voltage,Ambient air temperature,Air inlet temperature,Set measurement units in SAE English/Metric.,Internet upgrade,General Functions :Read ECU Information,Read and Erase Fault codes,Read Live Data,Read Freeze Frame,Graph Live Data,Screenshot Function.
  • ➤【EXTENSIVE APPLICATION】HD Trucks: for Freightliner, for Fuso, for GMC,for Hino, International, for Isuzu, for Iveco, for Kenworth, for Mack, for Mercedes, for Nissian UD,Peterbilt, Sterling, for Western Star, for Volvo,for Allison, for Bendix, for Eaton, for Wabco, for ZF,ect.and all Cars /min vans / light duty from 1996.F506 code reader can be also used as a universal OBD II code reader for reading and erasing codes on other brands cars' OBD System.
  • ➤【STRONG COMPATIBILITY】Works on most truck with J1708 and J1939 plus OBD2 automotive coverage, and covers Hino, Mishubishi Fuso, Isuzu and Nissan UD commercial vehicles. since 1992 Supports SAE J1850PWM, SAE J1850 VPW, IS0 14230-4, IS0 9141-2,IS0 15765-4, SAE J1708, SAE J1939, OBDII Scan and diagnose fault codes with code defination in the engine, transmission, ABS brake and instrument cluster or body control.
  • ➤【WIN IN THE DETAILS】The F506 obd2 scanner comes with new UI, new processor and new software, aims at providing you the best diagnostic experience. One-key update, 3.5”TFT color screen and languages will make you fall in love with it instantly. The response and operating speed increased by 60% at the same time. This durable tool is ruggedly built, perfect for both shop and road tests. It can be used directly out of the box.

Last update on 2020-03-28 / Affiliate links / Images from Amazon Product Advertising API

Last update on 2020-03-28 / Affiliate links / Images from Amazon Product Advertising API

Leave a Reply

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.