“This site contains affiliate links for which OEMDTC may be compensated” |
July 17, 2019 NHTSA CAMPAIGN NUMBER: 19V534000
Unexpected Command to Start Engine
If the ignition is in the run position and the engine starts unexpectedly while the vehicle is being serviced, there would be an increased risk of personal injury.
NHTSA Campaign Number: 19V534
Manufacturer Navistar, Inc.
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 16
Summary
Navistar, Inc. (Navistar) is recalling certain 2020 IC CE school buses equipped with PSI gasoline or propane engines and C7 Body Control Modules (BCM). An electrical overload condition in the BCM from the starter solenoid may occur and cause damage to the starter circuit of the BCM, possibly resulting in an unintended command to crank the engine when the ignition key is in the run position and the transmission is in the park or neutral position.
Remedy
Navistar will notify owners, and dealers will install an overlay harness and relay to provide electrical power to the starter circuit, instead of using the BCM to provide power. This repair will be performed free of charge. The recall began September 12, 2019. Navistar’s number for this recall is 19512.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
SEOCONTENT-START
******************************
POSTED ON ISIS
SEP 05 2019
Compliance Dept.
MAILED
SEP 122019
Comp I iance Dept.
SERVICE PROCEDURE
19512
SEPTEMBER 2019
SUBJECT: SAFETY RECALL
Starter Circuit on certain 2020 CE school bus
models built 24 April 2019 thru 02 May 2019 with
PSI gasoline or propane engine and C7 Body
Control Module (BCM).
DEFECT DESCRIPTION
The starter solenoid may cause damage to the starter crank output circuit of the
BCM, resulting in an unintended command to crank the engine when the ignition
key is in the ON position and the transmission is in the PARK or NEUTRAL
position. If the ignition is in the ON position during servicing, the engine could
start unexpectedly while someone is working in the engine compartment, which
could result in personal injury.
MODELS INVOLVED
This safety recall involves certain CE school bus models built 24 April 2019 thru
02 May 2019 with PSI gasoline or propane engine and C7 Body Control Module
(BCM).
ELIGIBILITY
This procedure applies ONLY to vehicles marked in the International® Service
Portal1
.. with Safety Recall 19512. Also complete any other open campaigns
listed on the Service Portal at this time.
VEHICLE RECALL 19512
© 2019 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners. 1
PARTS INFORMATION
Part Number Part Description Quantity
8900286R91 Kit; Jumoer Harness 1
306132C1 or Source
Locally Cable Tie Strap; 14-ln As Needed
Source Locally Wire Loom Taoe As Needed
27384R1 or Source Screw, Self-Tapping Machine Pan Head 1 Locally #10-16 X ¾ in
8900286R91 contains the following parts:
Part DescrlDtlon Quantity
Jumper Harness with Relay 1
Single Wire Jumoer 1
SERVICE PROCEDURE
WARNING! To prevent personal mJury, and / or death, or damage to
property, park vehicle on hard flat surface, turn the engine off, set the
parking brake and install wheel chocks to prevent the vehicle from moving
in either direction.
WARNING! To prevent personal Injury, and / or death, or damage to
property, if the vehicle must be raised, do not work under the vehicle
supported only by jacks. Jacks can slip or fall over.
WARNING! To prevent personal injury and/ or death, always wear safe eye
protection when performing vehicle maintenance.
WARNING! To prevent personal injury, and /or death, or damage to
property, allow engine / vehicle components to cool before servicing.
WARNING! To prevent personal injury, and / or death, or damage to
property, keep flames, sparks, or other heat sources away from vehicle and
do not smoke while servicing the vehicle’s batteries. Batteries expel
explosive gases, which may cause an explosion resulting in personal
injury, death, or damage to property. Avoid contact with any heat sources.
VEHICLE RECALL 19512
© 2019 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners. 2
WARNING! To prevent personal injury, and / or death, or damage to
property, remove the ground cable from the negative terminal of the battery
box before disconnecting any electrical components. Always connect the
ground cable last.
1. Park vehicle on flat surface.
2. Shift transmission to Park or Neutral and set parking brake.
3. Tum vehicle ignition to Key OFF position.
4. Install wheel chocks.
5. Disconnect and isolate ground cable from negative terminal located on
main vehicle battery.
6. Unlatch and open hood.
2
Figure 1. Fuse Relay Panel
1. Start relay
2. Connector 4003
7. Locate start relay ( Figure 1, Item 1) in fuse I relay panel on firewall.
8. Remove connector 4003 (Figure 1, Item 2) by pushing lock down.
VEHICLE RECALL 19512
© 2019 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners. 3
2
uu 87 87A 85
0000481574
Figure 2. Connector 4003 Face View
1. Cavity 87
2. Cavity 30
9. Unlock connector and depopulate circuit from cavity 87 (Figure 2, Item
1 ).
10. Remove relay from new jumper harness.
VEHICLE RECALL 19512
© 2019 Navistar, Inc. All rights reserved. All mar1<s are trademarks of their respective owners. 4
30 u
DOD 87 87A 85
Figure 3. Jumper Harness Relay Connector Face View
1. Cavity86
11. Unlock new jumper harness relay connector and remove GREEN plug
from cavity 86 (Figure 3, Item 1 ).
12. Populate cavity 86 of jumper harness relay connector with wire removed
in Step 9.
13. Install GREEN terminal lock onto jumper harness relay connector.
14. Populate cavity 87 of connector 4003 (Figure 2, Item 1) with spare
GRAY wire from jumper harness relay connector.
15. Remove terminal from cavity 30 of connector 4003 (Figure 2, Item 2).
Fold back the wire and, using wire loom tape, cover terminal and secure
wire in place.
16. Insert terminal from one end of single wire jumper into cavity 30 of
connector 4003 (Figure 2, Item 2).
17. Install GREEN terminal lock onto connector 4003.
18. Insert connector 4003 into start relay on fuse I relay panel.
19. Connect jumper harness connector to relay removed in Step 11 .
20. Open fuse/ relay panel.
VEHICLE RECALL 19512
© 2019 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners. 5
21. Using self-tapping screw, mount jumper harness relay to an open
location near start relay.
22. Close fuse / relay panel.
1 2
0000,1815 75
Figure 4. Location for Maxi Fuse
1. Main engine harness
2. Maxi fuse
23. Locate maxi fuse (Figure 4, Item 2) of jumper harness and secure to
main engine harness (Figure 4, Item 1) using two cable tie straps.
VEHICLE RECALL 19512
© 2019 Navistar, Inc. All rights reseived. All marks are trademarks of their respective owners, 6
1
Figure 5. Mega Fuse Terminal and Nut
1. Mega fuse nut
24. Remove upper mega fuse nut (Figure 5, Item 1 ).
OCCIO,IO ,!.?t
25. Connect eyelet of RED wire in jumper harness to upper mega fuse
terminal (Figure 5, Item 1 ).
26. Install mega fuse nut. Using a torque wrench, tighten to 100 lb-in ( 11.3
N•m).
NOTE: Cable tie straps should be placed every 14 in (35 cm).
27. Using cable tie straps, route and secure wire installed in Step 25.
VEHICLE RECALL 19512
© 2019 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners. 7
Figure 6. Ground Terminal and Nut
1. Ground nut
1
28. Remove ground nut (Figure 6, Item 1 ).
29. Connect eyelet of WHITE ground wire of jumper harness to ground stud
(Figure 6, Item 1 ).
30. Install ground nut. Using a torque wrench, tighten to 25 – 30 lb-in (2.8 –
3.3 N•m).
NOTE: Cable tie straps should be placed every 14 in (35 cm).
31. Using cable tie straps, route and secure wire installed in Step 29.
VEHICLE RECALL 19512
© 2019 Navistar, Inc. All rights reserved. All marks are trademarks of their respective ownefS. 8
3
4
Figure 7. Vehicle Interface Connector
1. Vehicle interface connector
2. Cable tie strap
3. Engine connector lock
4. Mounting bracket
32. Remove vehicle interface connector cable tie strap (Figure 7, Item 2).
33. Open vehicle interface connector (Figure 7, Item 1 ).
34. Push vehicle interface connector lock (Figure 7, Item 3) and release
vehicle interface connector from mounting block (Figure 7, Item 4).
VEHICLE RECALL 19512
@ 2019 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners. 9
□□□□ □□□□
□□□□□□ □□□□□
□□□□□□ □□□□□
□□□□ □□□□
0000461572
Figure 8. Vehicle Interface Connector Face View
1. Cavity C6
35. Remove terminal lock from the vehicle interface connector half with
BLUE latch.
36. Locate and remove terminal from cavity C6 (Figure 8, Item 1 ).
37. Fold back wire and, using wire loom tape, cover terminal and secure
wire in place.
38. Insert terminal of single wire jumper into cavity C6 (Figure 8, Item 1) of
vehicle interface connector.
39. Install terminal lock onto vehicle interface connector.
40. Reconnect vehicle interface connector halves.
41 . Install connector onto its bracket and secure in place using a cable tie
strap.
NOTE: Cable tie straps should be placed every 14 In (35 cm).
42. Route and secure single wire jumper harness to main engine harness
with cable tie straps.
VEHICLE RECALL 19512
© 2019 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners. 10
2
0000,IO I S80
Figure 9. Terminals
1. Mega fuse terminal
2. Ground terminal
43. Add dielectric grease and completely cover mega fuse terminal (Figure
7, Item 1) and ground terminal (Figure 7, Item 2} connections to avoid
corrosion.
44. Connect ground cable to negative terminal located on main vehicle
battery.
45. Start the bus to verify correct installation.
46. Close and latch hood.
47. Remove wheel chocks.
END OF SERVICE PROCEDURE
LABOR INFORMATION
Operation Number Description Time
A40-19512-1 Install Overlay Harness and Relay 1.0 hr
VEHICLE RECALL 19512
© 2019 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners. 11
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with this
campaign must be marked with a CTS-1075
Campaign Identification Label.
Complete the label and attach on a clean surface
next to the vehicle identification number (VIN) plate.
COMPLETED
Service LacaUon Code*
ADMINISTRATIVE/ DEALER RESPONSIBILITIES
WARRANTY CLAIMS
Warranty claim expense is to be charged to Warranty. Claims are to be
submitted in the normal manner, making reference to Safety Recall 19512.
Section 7 of the Warranty Policy and Procedures Manual contains further
information related to the submission and processing of AFC/ Recall claims.
As with all claim submissions, items acquired locally must be submitted in the
Mother Charges” tab. The cost of any bulk items (such as a bag of cable tie
straps, roll of wire, barrel of oil, or tube of silicone) should be prorated for the
cost of the individual pieces / amount used during each repair.
GROUP
GROUP – Enter n umber
NOUN – Leave b lank –:
4- I
–
C (CAUSE)- Enter either 1, 2. 3. (See below)
1 . Inspected (No repair required).
2. Inspected and repaired.
3. Defective part from parts stock. –
arranty Code) Enter 40. _
I
WARRANTY – (W
TYPE PART – En
PAO – Enter 00
ter P for type part causing failure
–
VEHICLE RECALL 19512
I
—
NOUN C WARR. TP
I I I
I
PAO
@ 2019 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners. 12
UNITED STATES AND POSSESSIONS
The National Traffic and Motor Vehicle Safety Act, as amended, provides that
each vehicle that is subject to a vehicle recall campaign must be adequately
repaired within a reasonable time after the owner has tendered it for repair. A
failure to adequately repair within 60 days after a tender of a vehicle is prima
facie evidence of failure to repair within a reasonable time. If the condition is not
adequately repaired within 60 days, the owner may be entitled to replacement
with an identical or reasonable equivalent vehicle at no charge, or to a refund of
the purchase price less a reasonable allowance for depreciation.
Dealers must correct all vehicles subject to this campaign at no charge to the
owner, regardless of mileage, age of vehicle, or ownership, from this time
forward.
Dealers should proceed immediately to make necessary correction to units in
inventory. All inventory vehicles subject to this recall campaign must be
corrected prior to sale, transfer or delivery. If vehicles have been sold or
transferred and you are in receipt of Customer Notification Letters and
Authorization for Recall Service cards for those vehicles, the transfer location or
customer must be notified immediately from your dealer location.
Dealers must make every effort to promptly schedule an appointment with each
owner to repair his or her vehicle as soon as possible. However, consistent with
the customer notification, dealers are expected to complete the repairs on the
mutually agreed upon service date.
Dealers involved in the recall process will be furnished a listing of owner names
and addresses to enable them to follow up with owners and have the vehicles
corrected. Use of this listing must be limited to this campaign because the list
may contain information obtained from state motor vehicle registration records,
and the use of such motor vehicle registration data for purposes other than this
campaign is a violation of law in several states.
CANADA
Dealers must correct all vehicles subject to this campaign at no charge to the
owner, regardless of mileage, age of vehicle, or ownership, from this time
forward.
Dealers should proceed immediately to make necessary correction to units in
inventory. All inventory vehicles subject to this recall campaign must be
corrected prior to sale, transfer or delivery. If vehicles have been sold or
transferred and you are in receipt of Customer Notification Letters and
Authorization for Recall Service cards for those vehicles, the transfer location or
customer must be notified immediately from your dealer location.
VEHICLE RECALL 19512
© 2019 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners. 13
Dealers must make every effort to promptly schedule an appointment with each
owner to repair his or her vehicle as soon as possible. However, consistent with
the customer notification, dealers are expected to complete the repairs on the
mutually agreed upon service date.
Dealers involved in the recall process will be furnished a listing of owner names
and addresses to enable them to follow up with owners and have the vehicles
corrected. Use of this listing must be limited to this campaign because the list
may contain information obtained from state motor vehicle registration records,
and the use of such motor vehicle registration data for purposes other than this
campaign is a violation of law in several states.
EXPORT
Export Distributors should proceed immediately to make necessary correction to
units in inventory. All inventory vehicles subject to this recall campaign must be
corrected prior to sale, transfer or delivery. If vehicles have been sold or
transferred and you are in receipt of Customer Notification Letters and
Authorization for Recall Service cards for those vehicles, the transfer location or
customer must be notified immediately from your distributor location.
Export Distributors are to submit warranty claims in the usual manner making
reference to this recall number.
Export Distributors are expected to provide full cooperation and follow-up with
respect to this important subject matter. If you have any questions or need
further assistance, please contact the Regional Service Manager at your regional
office.
NAVISTAR, INC.
VEHICLE RECALL 19512
© 2019 Navistar, Inc. All rights reserved. All marks are trademarks of their respective owners. 14
******************************
P\lbl c
•
A &IV1S1ilR COMPANY
IC Bua, LLC
2701 Navistar Drive
Usie, IL 60532 USA
navlstar.com
IMPORTANT SAFETY RECALL 19512
NHTSA RECALL NO. 19V-534
This notice applies to your vehicle Identified on the
enclosed card.
Dear IC Bus Customer,
This notice is sent to you in accordance with the
requirements of the National Traffic and Motor Vehicle
Safety Act.
IC Bus has decided that a defect which relates to motor
vehicle safety exists in certain 2020 CE school bus models
built 04/24/2019 thru 05/02/2019 with PSI gasoline or
propane engine and C7 Body Control Module (BCM).
REASON FOR THIS RECALL
An unintended engine start could occur when the ignition
key is in the run position and the transmission is in the par1<
or neutral position.
RISK TO MOTOR VEHICLE SAFETY
If the ignition is in the run position during servicing, the
englne could start unexpectanUy while someone is working
in the engine compartment which could result in personal
injury.
DEFECT REMEDY
The remedy will involve the installation of an overlay
harness and relay to provide electrical power to the starter
solenoid. Dealers have parts and Instructions to repair your
vehicle. The repair will be performed free of charge and
take approximately 1 hour and 15 minutes to complete.
ACTIONS YOU SHOULD TAKE
If you own this vehicle, please schedule an appointment
with any IC Bus dealer to have your vehicle repaired. You
can find your nearest dealer by calling 1-800-448-7825 or
by using the dealer locator at https://www.icbus.com.
MAILED
SC:? 12 2019
Compliance Dept.
SEPTEMBER 2019
If you have already paid for repairs prior to this notice
that corrected the defect, you may be eligible for
reimbursement of certain repair expenses if they occurred
07/17/2018 thru 09/23/2019. Present your original repair
papeiwork and proof of payment to any IC Bus dealer and
your eligibility will be reviewed. You may also subrntt a
claim using the enclosed Request for Reimbursement can:I.
If you are the lessor of this vehicle, please fo,ward a
copy of this notice to the lessee within ten days to comply
with federal regulations.
If you do not own this vehicle, please fill out and return
mail the enclosed card so that you will not be contacted
again about this recall.
IF YOU NEED ASSISTANCE
If you believe that IC Bus has failed to remedy the defect
without charge or within a reasonable time, please follow
the procedure described in the Owner Assistance Guide
section in your Owner’s Manual or call toll free 1-800448-
7825.
You may also submit a complaint to the Administrator,
National Highway Traffic Safety Administration, 1200 New
Jersey Ave, SE, Washington, DC 20590; or call the toll
free Vehicle Safety Hotfine at 1-888-327-4236 (TTY: 1-800-
424-9153); or go to https://www.safercar.gov.
IC Bus requests your prompt attention and patience
regarding the correction of this defect and apologizes for
any inconvenience this may cause you.
IC Bus, LLC
****************************
SEOCONTENT-END
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
IC BUS | CE | 2020 |
8 Associated Documents
Recall Quarterly Report #2, 2019-4
RCLQRT-19V534-1963.PDF 211.22KB
Owner Notification Letter(Part 577)
RCONL-19V534-3274.pdf 38.278KB
Recall Acknowledgement
RCAK-19V534-8261.pdf 244.937KB
Defect Notice 573 Report
RCLRPT-19V534-6022.PDF 213.949KB
Recall 573 Report- Amendment 1
RCLRPT-19V534-1583.PDF 213.962KB
Recall Quarterly Report #3, 2020-1
RCLQRT-19V534-4682.PDF 211.301KB
Remedy Instructions and TSB
RCRIT-19V534-7933.pdf 435.879KB
Recall Quarterly Report #1, 2019-3
RCLQRT-19V534-2086.PDF 211.115KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V534&docType=RCL
- 🍇➤Please Note: 1. The HD OBD option is available for heavy truck owners and the OBD/EOBD option is available for other vehicle. 2. Owners need to fix the problem with the truck first before they need clear the error code.
- 🍉➤【Support Full Systems for Heavy Duty Truck】 NL102 PLUS supports read and clear DTC, live data, ECU information for truck all systems. Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more, which are in compliance with J1939, J1708 and J1587 protocols, It includes almost American HD trucks(Class4-Class8), it is recommended that customers confirm before purchase that if they comply with the years and agreements supported by NL102P before purchasing.
- 🍋➤【Professional DPF Regeneration Tool】Force DPF Regen work on Cummings, Detroit, Maxxforce, ISUZU, HINO engine,It covers almost all US trucks, supported advanced features: DPF Regeneration,D-O-C Cleaning Procedures, DPF Regeneration in Parking, DPF Regeneration in Driving, DPF Onboard. NL102P's tool helps you re-awaken the engine power When the diesel p-articulates of the engine accumulate. It will save $800-$2500 for truck owners a year.
- 🍊➤【Excellent Oil Light Reset】NL102 PLUS support Oil service reset work on Cummings, Detroit, Maxxforce engine. when the replacement of engine oil is done, the truck system calculates when to change the engine oil and filter based on vehicle use. An oil change is required whenever indicated by the display, otherwise it will affect the engine maintenance and life. The NL102P truck scanner offers help to reset the Oil Life Reminder (Determine the Oil Service Light), ensure your driving safety.
- 🍐➤【All OBD/EOBD Diagnosis】NL102 PLUS supports both all 12V and all 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. NL102 PLUS can read and earse the trouble codes, determine the MIL (check your Truck engine) and I/M Readiness, Freeze Frame, Live Data, O-xygen Sensor Test, On-Board Monitor, Vehicle Identification Info. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair. In order to ensure that you can use the NL102P, please check the manual before purchasing.
- 🌟【Run Your DPF Cleaner, Longer -Renew, Don't Replace!】Safeguard your truck from breakdowns and and high repair costs with focused DPF care. Opt for HD3400, featuring DPF regen, reset, DPR state control, and more, tailored for engines like Cummins, Detroit, Caterpillar, etc. Imagine this: easy and cost-effective DPF regen saving you from potential $10,000 to $30,000 in repairs. Unlock compliance-free operation for improved fuel efficiency, extended engine life, and significant cost savings
- 🚒【Designed for Cummins Engine Vehicles】HD3400 Plus fits almost all Cummins engines (ISB, ISC, ISD, ISG, ISK, ISL, ISX, ISM, ISN, QSB, X12, X15, B6.7, L9, L9N, QSM11, and more) commonly found in trucks like Freightliner, Kenworth, International, Peterbilt, Mack, Ford, Volvo, Western Star, Autocar, Terex, and school buses like Thomas/Blue Bird, It's also compatible with Komatsu/Sany machinery, Agrifac vehicles, RVs, and more.
- 🚜【Maximize Caterpillar Engine Trucks' Potential】HD3400 Plus diesel scanner, exclusively for Caterpillar engines (C7, C9, C11, C13, C15, C32, and more) commonly found in trucks like Caterpillar, Ford Pick-up, Freightliner, Peterbilt, Kenworth. Features include code reading/clearing, live data streaming, ECU retrieval, DPF regeneration and more. Unleash your Caterpillar engine's power.
- 🚛【Designed for Detroit Engine Trucks】ANCEL HD3400 heavy duty truck scan tool is compatible with a wide range of heavy duty commercial trucks – class 7 and class 8, medium duty trucks, light duty trucks and semi-trucks equipped with Detroit engines, including DD13, DD15, DD16, Series 50, Series 60, MBE 900, MBE 4000, OM501, OM502, DDDL 6, and DDDL 7.
- 🚐【Designed for Paccar Engine Trucks】ANCEL HD3400 heavy-duty truck scanner diagnostic tool is specifically designed for Paccar engines, including Paccar PX-7, PX-9, MX-11, MX-13.
- 🚚【Wide Truck Applications】Heavy duty truck scan tool covers almost J1587, J1708 and J1939 protocols heavy duty trucks and OBD II vehicles. Such as Cummins, Paccar, Detroit, Perkins, International, Peterbilt, Allison, Eaton, Ford duty trucks and so on, Covers class 4 (14,001 lbs) through class 8 (33,000 lbs and over) heavy duty trucks. One that meets all the requirements! NOTE:Compatibility will vary on vehicles model and year, please send V-IN to check the compatibility before purchase.
- 🔎【Comprehensive Full Systems Diagnostic Tool For Truck】Launch Heavy Duty Truck Diagnostic Tool offers OE-Level diagnosis for all systems of heavy truck/Pickups/Bus/Van in compliance with OBD-II Communication Modes 1-10 and J1587, J1708 and J1939 protocols,Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more.
- 🔥【All OBD/EOBD Diagnosis】This truck scanner diagnostic tool supports both most 12V and 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. Our truck scan tool can read codes, erase codes, I/M Readiness, Live data, EVAP Test. . . etc for obd2/eobd cars. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair.
- 💡【Friendly Design, Easy of Use】This heavy duty diagnostic scan tool is plug and play, simple and convenient, The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- ✨【3 YEARS WARRANTY & FREE LIFETIME UPDATES】The diesel truck scanner is exclusively designed for US truck. it's come With a full service functions and full systems and provides 24/7 technical support, 3 years warranty, 90-days free return for refund or replacement. This diesel scan tool is suitable for auto repair shops and technicians.No subscription fee and free lifetime updates.
- 【Extensive Compatibility】After the upgrade, the compatibility is wider and more accurate! HD601 PRO heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Such as Cummins, Paccar, Detroit, Perkins, Freightliner, International, Peterbilt, Ford, Class 4-Class 8 trucks, etc. It also check engine diagnosis on most cars, minivans and light trucks.
- 【 Full System Diagnostic】HD601 PRO Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool for Cummins, Caterpillar, Detroit, Perkins, Maxxforce, Bendix,Wabash, Wabaco, Haldex, Allison, Eaton heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money.
- 【Enhanced Diesel OBD Scanner】The HD601 PRO Diesel OBD Scanner offers unparalleled diagnostic capabilities for heavy-duty trucks. Beyond code reading, clearing, and live data display, it retrieves vehicle information, freeze frames, and DTCs. With 6, 9, and 16 pin cables, it ensures compatibility with various engines. This scanner's real-world testing prowess ensures comprehensive support for a wide array of heavy-duty truck engines, making it an indispensable tool for truck diagnostics.
- 【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand the codes definition and fix the problem faster. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages.
- 【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- Powerful and Cost-Effective - An essential heavy duty truck scanner designed for heavy duty truck owner-operators and small commercial fleets. With the Diesel Decoder, just plug the diesel scan tool into the diagnostic port and pair with the free smartphone app to access in-depth HD diagnostic information.
- Swift and Adaptable - This heavy duty truck scanner recognizes both diagnostic trouble codes (DTCs) and brand-specific error codes for prevalent heavy-duty truck brands in North America, such as Freightliner, Peterbilt, Mack, Kenworth, Volvo, Western Star, among others and give the ability to perform DPF regens on select model years of Cummins, International, Detroit, Isuzu, Paccar, Mercedes, Hino and Mack/Volvo.
- Instant Repair Help - The diesel scan tool seamlessly connects to the Diesel Laptops comprehensive Diesel Repair Platform library so you can immediately start diagnosing and repairing any problems and get back on the road as soon as possible.
- Continuous Enhancement - Benefit from direct feature additions and updates via the app, our heavy duty truck scanner will continue to have functionality added over time. This removes the hassle of lengthy update processes and the financial strain of renewing costly diagnostic gear.
- 🔥🔥🔥2024 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD heavy duty truck scan tool 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>40+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
- 🚛Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch diesel truck scan tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- 🚛40+ Reset Functions & Bidirectional Control - 2024 newest top truck scanner diagnostic tool, comes with 40+ special services (ECU, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel scanner diagnostic tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD truck scanner not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
- ⚠️Warm Tips: Before you make a purchase, please provide your truck's VIN code, model, year of production, as well as the brand and model of the engine equipped in your vehicle. Additionally, inform us of the specific features you require. We will conduct a thorough check to ensure the product you are selecting is fully compatible with your vehicle.
- 🔥2024 TOP INTELLIGENT DIAGNOSTIC SCANNER FOR SEMI COMMERCIAL: ANCEL V5 HD obd2 scanner is specifically designed for 12V & 24V semi trucks,pickup trucks,heavy-duty trucks and 99% of commercial vehicles.you will enjoy✅All System Diagnostic;✅40+ Special Functions;✅ Full Bi-directional Test;✅Exclusive Remote Diagnosis Assistance;✅Full System Diagnostic ;✅Wider Vehicle Coverage;✅ Full HD OBD /OBDII /EOBD Modes;✅Top-level Hardware;✅>2 Yrs Free Update,Lifetime Tech Support
- 🚚40+ Resets with ABS SRS DPF Regen: ANCEL V5 HD includes 40+ resets for various systems, including ABS, SRS, DPF, EPB, BMS,DPF Regen,Parameter Setting,Idle Speed Adjustment, Speed Limit Adjustment and more to fully meet your various needs. These resets can help reset the vehicle's systems to their default settings, eliminating any error codes or malfunctions that may be causing problems. Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛FULL BI-DIRECTIONAL CONTROL, GET YOU TO MALFUNCTIONS DIRECTLY:ANCEL V5 HD bidirectional scan tool supports bidirectional testing, which means it can both read and erase fault codes from the vehicle's ECUs.This feature saves time and money by eliminating the need for multiple scanners or tools.you can quickly identify whether the repair job works or not:Aftertreatment Test, Injector Test,Fuel Pump Test,Cylinder Test,Enigne State Monitor,A/C Compressor Test,Heated Oxygen Sensor Test and more.
- 🚌OE-Level Full System Diagnostic:ANCEL V5 HD code reader is a professional-grade truck scanner that covers almost all the systems in semi-commercial vehicles, including engine, transmission, ABS, SRS, airbag,instrument panel, etc.It provides accurate and comprehensive diagnostic results,helping you quickly identify and solve vehicle problems,which are in compliance with J1939, 1708,ISO14230,ISO15765,ISO9141,ISO11898,E-J1850 VPW,SAE-J1850 PWM,J1587,CAN TP16,CAN TP20,AN-FD,and DOIP protocols.
- 🔥🔥🔥【2024 ANCEL V6HD, TOP-NOTCH HEAVY DUTY TRUCK SCANNER】ANCEL V6HD is designed to diagnose 12-24V diesel trucks/ buses/ trailer/ commercial vehicles,V6HD diesel scanner offers more than 10 advantages: ✅ Advanced Bidirectional Control ✅ ECU Coding&Programming ✅ 3000+ Active Tests ✅ 40+ Service Resets ✅ Full OBD2 Function ✅ All System Diagnostic ✅ Graphing Live Data ✅ 10,000+ Car&150+Brand Coverage✅ CAN FD & DoIP✅ Wireless Operation✅ Data Print/Feedback/Report/Email ✅ 2-YEAR Free Update. 🔥Hardware of V6HD is equally cutting-edge:✅ 8000 mAh✅ 8-Inch Tablet✅ 4-core 2.0Ghz(quicker operation)✅ 2G RAM/32G ROM (Expandable)✅ Android 10.0✅ Bluetooth 5.0 & Wifi✅ 13+ Languages Etc
- 🚛【 40+ RESET SERVICES, GOES WELL BEYOND BASIC FUNCTIONS】2024 newest top truck scanner diagnostic tool, comes with 40+ special services (such as Oil Reset, Brake Reset, ABS Bleeding, Injector Reset, SAS Reset, TPMS Reset, BMS Reset and more depending on make & model! Moreover,V6HD will continue to keep updating to support more newer modes from coming year. 📢NOTE: Most of main features available for diesel vehicles, with less support for petrol vehicles,please send VIN number(s) of the vehicle(s) to us, if you are not sure whether V6HD is compatible with your vehicle or not.
- 🚛【CUTTING-EDGE ECU CODING&PROGRAMMING, UNLOCKING THE POTENTIAL 】V6HD can customize your car via advanced ECU coding. It allows you match/initialize/recode ECUs, disable annoying functions, refresh hidden higher functions, like level calibration, Idle speed learning&Adjustment, camshaft timing control learning. It can retrieve and reflash the control modules info, rewrite adaptive data for certain components after replacement, and fix the issues such as drivability, fuel efficiency, power loss and improve durability of mechanical parts. 📢NOTE : ECU coding are not compatible with all vehicles, please send us your VIN to check vehicle compatibility.
- 🚛【3000+ BI-DIRECTIONAL TESTS, FAR AHEAD OF RIVALS】V6HD truck diagnostic tool is equipped with a comprehensive range of active tests,outputing commands to ECU to judgment of component functional integrity based on actua-tor responses. For example, test fan operation to diagnose ab-normal temperature, Emission Leak Test, Cylinder Test, Fuel Pumps, AC On/ Off, Windows/ Door Up/Down etc, Moreover, the menu lists thousands of available tests covering 99% actuators which can quickly help you check whether the system or component goes well of not. Time halved, revenue doubled.
- 🚛【OEM-LEVEL DPF FUNCTIONS, IN-DEPTH SAVING BUDGET ON FIXING&REPAIRING】V6HD support OEM-level dpf function for Cummins, Detroit, Caterpillar, Paccar, International, Volvo engine etc, including dpf regen, dpf related information reset, dpr state reset, dpd forced regen , dpf pressure sensor learn/reset, dpf/catalyst 2 reset etc,saving the cost of purchasing a dpf, which helps you better solve the exhaust aftertreatment system problems📢NOTE : advanced dpf functions are not compatible with all vehicles, please send us your VIN to check vehicle compatibility.
- 【Full Systems Heavy Duty Scanner Tool】:this heavy duty scanner tool supports Read DTC and Clear DTC, Live Data,Engine Check, Transmission, Drivetrain, Suspension, Cluster, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more, which are in compliance with J1939, J1708 and J1587 protocols,
- 【OBD2/HDOBD/EOBD All Diagnosis】: supports both all 12V and all 24V truck, with 6 pin and 9 pin adapters for different interfaces.It support reading code, earsing trouble codes, Live Data, determine the MIL (check your Truck engine) and I/M Readiness, Freeze Frame, O2 Sensor Test, On-board Monitor, Vehicle Identification Info.It can lookup DTC, translates the related code's meaning to help you know what's wrong with the car.
- 【Suitable for Most Trucks】:diesel diagnostic scanner support all truck standard protocols SAEJ1939/ J1587/ J1708,it work on heavy duty trucks/ light truck/ mini vans/ buses/ pickups from1996 to now.
- 【CANBUS System】:Detect the CANBUS node, and easily find out the wrong modoles and lines.
- 【Professional Automotive Scanner Diagnostic Tools】:Designed specifically for HDOBD/OBD2/EOBD.This HD10 covers all the functions of HDOBD,OBD2,and EOBD. What is more important is that it provide the results correctly and quickly, and you can read the results with graghs, which make you easier to read.
- 🚚DPF Force Regen & Reset for Cummins Caterpillar Engine -- Ancel HD100PRO dpf regeneration scanner--A more professional, fast and efficient way to reset and clean your DPF to ensure your engine runs smoothly and meets emissions standards. The all-in-one solution saves you money on maintenance costs, and the Inspection Record feature records all DPF inspections to help track and manage maintenance schedules.
- 🚛Full System Diesel OBD Diagnostic for Trucks -- Providing comprehensive and powerful vehicle diagnostic capabilities, this diesel truck scan tools‘ Diesel OBD functionality is suitable for freighters, International, Kenworth, Mack, Mercedes Truck, International, Kenworth, Mack, Mercedes, Peterbilt, Sterling, Western Star, Volvo and other HD Trucks, reducing maintenance costs and extending vehicle life.
- 🚛Enhanced Full Functions OBD2 Scanner for Diesel Trucks & Cars -- Giving you a better understanding of the heart of your vehicle, the HD100PRO truck scanner diagnostic tool also serves as a full-featured OBDII scanner, supporting 10 common modes to help you quickly locate vehicle problems and reduce trial-and-error time and costs during repairs.
- 🚛New Generation Bluetooth & Wifi Connectivity -- Say goodbye to the shackles of extra cables, the New Generation Bluetooth connectivity is the most important feature that differentiates the HD100PRO semi truck scanner diagnostic tool from the traditional diesel scan tool, it gives you the fastest response and smoothest operation.
- 🚛Lifetime Free Update APP--Ancel Trucker -- Simply download the ANCEL TRUCKER app to your smartphone, register, and connect.The APP features a user-friendly interface that is ideal for beginners and professionals alike.In addition, this diesel diagnostic tool features a DPF inspection record, a language converter, a feedback function and much more, making it the perfect truck scanner for trucks on the road.
Last update on 2024-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.