NHTSA ID Number: 10162021
Manufacturer Communication Number: SRV-TSB-19-007
Summary
CR178 Ducati Quick Shift sensor cable re-routing - Applicability: Multistrada 950 S MY 2019; Multistrada 1260 S (all model versions) MY 2019; Multistrada 1260 Pikes Peak MY 2019; Multistrada 1260 Enduro MY 2019. This technical service bulletin informs dealers and service managers of the potential for improper installation of the Quick Shift sensor cable (DQS). It also informs them of the requirement for involved units to be inspected, and for DQS sensor cable re-routing in needed. This bulletin also provides VIN information, service instructions and associated illustrations. The bulletin document has been redacted for sensitive information.
2 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
|---|---|---|
| DUCATI | MULTISTRADA | 2019 |
| DUCATI | MULTISTRADA 1260 ENDURO | 2019 |
CR178 Ducati Quick Shift sensor cable re-routing
Multistrada 950 S MY 2019
Multistrada 1260 S (all model versions) MY 2019
Multistrada 1260 Pikes Peak MY 2019
Multistrada 1260 Enduro MY 2019
Technical Service Bulletin SRV-TSB-19-007
1/5
Date: June 25, 2019
To: Dealer Principal, General Manager, Service Manager, North American Dealer Network
From: Richard Kenton, Technical Director
Eric Bradley, Technical Training and Publications Manager
Dear Dealers,
Ongoing product testing and reports from the dealer service network have identified the potential improper installation of the Quick Shift sensor cable (DQS). The DQS sensor cable could be slightly stretched (mainly when the gearchange lever is operated), with a consequent possible internal damage causing the following errors:
- P0827: Ducati Quick Shift sensor error [Short circuit to ground]
- P0828: Ducati Quick Shift sensor error [Short circuit to positive]
The motorcycles involved in this Service Campaign must be inspected and the DQS sensor cable must be re-routed if needed to ensure the correct operation of the system.
In the case of the presence of the above listed failure codes, contact your service area manager through YouTech.
NOTE
In case of accessory DQS sensor assembly for the Standard versions, ensure the cable is routed as described in this bulletin.
CR178 Ducati Quick Shift sensor cable re-routing
Multistrada 950 S MY 2019
Multistrada 1260 S (all model versions) MY 2019
Multistrada 1260 Pikes Peak MY 2019
Multistrada 1260 Enduro MY 2019
Technical Service Bulletin SRV-TSB-19-007
2/5
Application
You can find the precise list of VIN numbers involved in CR178 on the DCS in sections:
VIN HISTORY
You can consult the single frame number.
CAMPAIGNS
You can consult all the VIN numbers that Ducati Motor Holding sent you.
Customer Impact
All motorcycles in your inventory (to be registered or already registered) and to be delivered to
final Customers must be updated during pre-delivery operations and always before delivery to
the final Customer. All motorcycles already delivered to final Customers must undergo this
inspection as soon as they come to your workshop. Note: this is not a safety recall.
Parts Distribution
No additional component is required to perform the update
Warranty Reimbursement Rules
Reimbursement for work associated with this Service Campaign will be made through the
regular warranty claim procedure using the “Vehicle History” section of the DCS. The warranty
claim is pre-filled and is identified as CR178.
You will be reimbursed for minutes ( labor units) labor time that includes the time
necessary for:
• Vehicle reception
• The re-routing of the DQS sensor cable
• Soft cleaning of the vehicle
CR178 Ducati Quick Shift sensor cable re-routing
Multistrada 950 S MY 2019
Multistrada 1260 S (all model versions) MY 2019
Multistrada 1260 Pikes Peak MY 2019
Multistrada 1260 Enduro MY 2019
Technical Service Bulletin SRV-TSB-19-007
3/5
Service Solution
NOTE
To ensure the correct execution of the operation within the provided labor time to carry out the updates, it is necessary to follow the sequence indicated in the following instructions
For the correct routing of the DQS sensor cable, you will have to check the distance between the DQS sensor cable (1) and the gearchange lever; carry out this check using a 4 - 5 mm feeler gauge, as shown in the figure.
COMPLIANT DQS sensor cable routing
If the distance between the DQS sensor cable and the gearchange lever
is between 4 - 5 mm, cable routing is COMPLIANT and no corrective action is required.
Feeler gauge
4÷5 mm
CR178 Ducati Quick Shift sensor cable re-routing
Multistrada 950 S MY 2019
Multistrada 1260 S (all model versions) MY 2019
Multistrada 1260 Pikes Peak MY 2019
Multistrada 1260 Enduro MY 2019
Technical Service Bulletin SRV-TSB-19-007
4/5
NON-COMPLIANT DQS sensor cable routing
If the distance between the DQS sensor cable and the gearchange lever is more than
the 4 - 5 mm specified above, cable routing is NOT COMPLIANT.
Corrective action
Restore the distance between DQS sensor cable and gearchange lever by slightly pulling, without forcing, the cable downwards, as shown in the figure.
Feeler gauge
4÷5 mm
CR178 Ducati Quick Shift sensor cable re-routing
Multistrada 950 S MY 2019
Multistrada 1260 S (all model versions) MY 2019
Multistrada 1260 Pikes Peak MY 2019
Multistrada 1260 Enduro MY 2019
Technical Service Bulletin SRV-TSB-19-007
5/5
NOTE
Should the DQS sensor cable not easily slide inside the relevant cable guide, remove the front sprocket cover and re-route the cable by respecting the distance of 4 - 5 mm from the gearchange lever.
For questions or information about this Service Campaign,
please contact your Service Area Manager
Technical Service Bulletin SRV-TSB-19-007
Date: June 25, 2019
https://www.nhtsa.gov/recalls?nhtsaId=10162021
https://static.nhtsa.gov/odi/tsbs/2019/MC-10162021-0001.pdf
- Wide range of applications: High-quality motorcycle EFI system diagnostic instrument can meet the detection and diagnosis of multiple motorcycle EFI systems. It is indeed an ideal tool for aftermarket maintenance of motorcycles.
- Large capacity: Scanner tool which adopts a 32-bit processor and a 3.2-inch color screen supports large capacity memory. The product features in easy operation, good touch feeling, and long durability.
- Strong practicability, multiple functions: Read information system, read data stream, freeze data, read fault code, erase fault codes, CO idle speed adjustment, actuators test, trouble shooting guidance, etc.
- Functions: 1. Read information system (read ECU version information); 2. Read data stream (read the parameter values ??of various ECU sensors); 3. Freeze data (lock dynamic data for easy viewing); 4. Read fault code (read fault code stored by ECU and conduct analysis); 5. Erase fault code (clear fault code stored by ECU); 6. CO idle speed adjustment; 7. Actuators test; 8. Trouble shooting guidance, etc.
- Check While Using: 1) Check if the ignition switch is on or if the engine is running; 2) Check if the power light of the host is on (red light), and if the signal light is flickering when detecting the system; 3) Check if the diagnostic cable and the diagnostic base are in poor contact or short circuit; 4) Check if the version of the software is suitable for the vehicle type.
- CD-ROM with EZinstall TuneECU software and drivers
- Preconfigured cable with FT232RL chipset and latest firmware
- Works on all windows 32 & 64 bit including windows 10
- Step-by-step guide with pictures
- Please see photo for models covered***
- Read and Clear Fault Codes -- Reset Service Reminders
- Control Unit Information -- View Sensor Values Log & Graph Live Values
- Component Function Test -- Component Calibration Adaption Reset and Relearn
- Basic Coding Bleed Tests And much more…
- Now for iPhone & iPad!
- BMW 10-pin OBD adapter for motorcycles- Allows K-line and DCAN diagnostics.the 10pin cable Suitable with GS-911,OBDLink,Motorscan...
- Motor 10pin cable Allows K-line and DCAN diagnostics software - ISTA/D ISTA/P Rheingold
- 10pin Motor cable Designed to work with just a laptop and regular K-line and/or DCAN interface
- Motor 10pin cable Supports diagnostic software: ISTA/D ISTA/P Rheingold
- BMW 10-pin OBD adapter for motorcycles and 5 years warranty
- Make sure your motorcycle is compatible before purchasing this tool. Read full product description to determine the compatibility or contact us if you have any questions. ***
- Read and Erase Fault Codes Diagnose your Harley-Davidson bike yourself. You can read diagnostic trouble codes (DTCs), also known as fault codes or error codes, with detailed descriptions. Motorscan reads all fault codes that are stored in your bike’s electronic control unit (ECU). You can run a global search or choose individual systems, such as Ignition or Immobilizer to check for errors.
- Save and Share Reports You just caught an intermittent problem and want to show it to your mechanic? It’s easy. Save the report and send it to your mechanic for faster turnaround on needed services. You can store and share multiple diagnostic reports from the Motorscan app.
- View Live Data Parameters and Visualize Engine Data Get a real-time view of all important parameters, including engine temperature, pressure, battery voltage, and more. Easily look up your bike’s VIN number and electronic control module’s specs. Use Motorscan app’s virtual dashboard to see live parameters displayed live on your smartphone.
- Free App for Android and iPhone Download free Motorscan app for Android and iOS smartphones to use with Motorscan Harley-Davidson adapters. Easy Installation This is the world’s smallest diagnostic tool for Harley-Davidson bikes. Motorscan fits snugly into the bike’s DLC diagnostic port. It connects to your smartphone via Bluetooth in seconds. No wires needed. You can start monitoring your bike’s health right away!
- Classic design, fast scan and clear trouble codes, even a beginner can use this unit to read the error code, find out what the problem is and perhaps fix it. Save money and time.
- Works on MOST 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports English, German, French, Spanish, Finnish, Dutch, Russian and Portuguese.
- Easily determines the cause of the check engine light. I/M monitor readiness test, turn off the MIL (check engine light) as well as view freeze frame data. Read hard (memory) / pending (intermittent) and historic codes and show definitions.
- The AD310 scanner is well built with a large LCD display (128 x 64 pixel) that has white backlight and contrast adjustment, indicates test results directly. No need any Batteries or Charger, gets the power directly from the OBDII Data Link Connector in your vehicle.
- It's equipped with a 2.5 feet long cable and made of a very thick flexible insulator. There are 4 buttons on AD310. The Up and Down button for scrolling the menu, the Enter and Exit button allow for navigation back and entering menu.
- GS-911 Diagnostic Tool for BMW Motorcycles, connects with WIFI or USB
- ADD UP TO 10 VIN'S With THIS ENTHUSIAST VERSION
- Shows ECU information, Read Diagnostic Fault Codes, Clears Diagnostic Fault Codes
- Reset Service Reminders, Recalibrate Idle Actuation,
- Remove Rev. Limit (S1000RR) after reaching 500km, Best Prices - Best Customer Service
Last update on 2019-12-03 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2019-12-03 / Affiliate links / Images from Amazon Product Advertising API
