June 7, 2019 NHTSA CAMPAIGN NUMBER: 19V426000
Circuit Board Damage Affecting Lighting Functions
Nonfunctioning lights can increase the risk of a crash.
NHTSA Campaign Number: 19V426
Manufacturer Newmar Corporation
Components ELECTRICAL SYSTEM, EXTERIOR LIGHTING
Potential Number of Units Affected 2,003
Summary
Newmar Corporation (Newmar) is recalling certain 2016-2019 Ventana LE and 2017-2019 Dutch Star, Essex, London Aire, Mountain Aire and Ventana, and 2018-2019 New Aire motorhomes built on a Daimler trucks chassis. The rear mounted Power Distribution Module (PDM) may have been damaged during manufacturing, possibly resulting in the rear marker lights, brake lights, or turn signals not functioning.
Remedy
Newmar will notify owners, and Daimler Trucks dealers will inspect and replace the rear PDM, as necessary, free of charge. The recall began July 18, 2019. Owners may contact Newmar customer service at 1-800-731-8300. Newmar's number for this recall is 18V-852.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
21 Affected Products
Vehicles
MAKE | MODEL | YEAR |
NEWMAR | DUTCH STAR | 2017-2019 |
NEWMAR | ESSEX | 2017-2019 |
NEWMAR | LONDON AIRE | 2017-2019 |
NEWMAR | MOUNTAIN AIRE | 2017-2019 |
NEWMAR | NEW AIRE | 2018-2019 |
NEWMAR | VENTANA | 2017-2019 |
NEWMAR | VENTANA LE | 2016-2019 |
4 Associated Documents
Defect Notice 573 Report
RCLRPT-19V426-5236.PDF 224.328KB
Recall Acknowledgement
RCAK-19V426-7410.pdf 245.553KB
Recall Quarterly Report #2, 2019-4
RCLQRT-19V426-2083.PDF 211.242KB
Recall Quarterly Report #1, 2019-3
RCLQRT-19V426-4632.PDF 211.14KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V426&docType=RCL
- 【Ultra Bright】 - Yorkim 3157 Red Led Bulbs are built in Constant Current IC, powered by 54smd 3014 and 4smd high performance 3030 chipsets to offer 300% brightness than OEM halogen bulbs and give a refreshed look to your vehicle
- 【Fitment】 - Plug and play. Non-Polarity design. Simply plug the bulb in and you are all set. Commonly used for 3056 3057 3156 3157 3357 3457 3757 4057 4114 4157 5702 LED Brake Lights, Backup Reverse Lights, Parking Lights, Turn Signal Lights and etc.**NOTE**: A 50w Load resistor(ASIN:B07KS6KMYG)might be needed to prevent error message or solve the hyper flash issue for some vehicles when replace for Turn Signal Lights. Not suitable for CK sockets
- 【360 Degree Illuminating 】- Each bulb is 360 degree powered by 54smd 3014 and 4smd high performance 3030 chipsets with HD projector to ensure optimal visibility and stronger light penetration
- 【High Quality And Long Lifespan】 - With built in Constant Current IC, Yorkim 3157 Led bulbs circuit is protected by stable input current. The circuit temperature is well controled in the safe range in order to ensure a long life span up to 50,000 hours
- 【NOTE】 - Normally different LED bulbs are required for different parts of the same car (I.e. brake light, tail light, turn signal light, etc.). Although 3157 LED bulbs are most commonly used, they may not fit all parts of your car. Please check owner's manual to verify compatibility before purchase or send us a picture of your original bulb for our assistance on selecting the right product
- (Set of 2 Bulbs)54SMD 3014 & 3SMD 3030 high Brightness chips per bulb,Working Voltage:9v-30v,Size: 1.75"x 0.94" x 0.86"
- Fits:7440A 7440NA 7440 7440SV 7443NA 7441 7443 7443R 7444 992 WY21W W21/5W W21W etc. Easy installation, plug and play.
- Application:Brake Lights,Tail Lights,Stop Lights,Daytime Running Lights,Fog Lights etc.Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage:Compatible for both CK/SRCK and Standard socket, non-polarity design.300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- 1:1 Design - Almost 1:1 mini design as halogen, easy to install in 3 minutes without any modification.
- Super Bright - EP LED Chips, 6000K Cool White, 40W, 4800LM per pair, 300% brighter as halogen lamps.
- Fitment For Many Socket - 3157 3057 3057 4057 4157 3157K 3157A 3157NA 3057A 4114 4157K 4157NA 3357 3357A 3454NA 3457 3457A 3457K 3457NA 3757A 5702A 5702AK 3057K 3057LL 3157LL 3357LL 4157LL 3157NAK 3357KNA 3457NAK 4157NAK etc. Please make sure the correct size before purchase OR feel free contract us, our support team will help you.
- Long Lifespan - DC 9-32v wide voltage, IP65 waterproof ensure 3157 led bulbs work stable in long-term. Aluminum material for efficient heat dissipation bring up to 50,000hrs lifespan.
- 100% Satisfaction - LAWTOOLIGHT led lights add style and safety to your vehicle, as well as offer an enhanced driving experience for you. If you have any questions, do not hesitate to contact us. Order now with 100% confidence!
- (Set of 2 Bulbs)54SMD 3014 & 3SMD 3030 high Brightness chips per bulb,Working Voltage:9v-30v
- Fits:1157 BAY15D 1016 1034 1157 1157A 2057 2057A 2357 2357A 2357NA 2397 3496 7528 p21/5w etc.Easy installation, plug and play.
- Application:Brake Lights,Tail Lights,Daytime Running Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage:Exclusive design, 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- (Set of 2) 7443 Strobe led brake light bulbs will strobe at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs, RVs rear-end collision.
- LED Chips: 39 pieces high quality,high power with high performance 2835 led chips per 7440/7443 strobe brake led bulb ---360 degree full angle illumination with projector lens design
- T20 7443 dual filament, big difference between high and low intensity light output, replacing rear 7440 7443 brake stop light, center high mount stop ( 3rd brake ) light,etc. Extra load resistors maybe required to avoid the error code or blinking issue.
- The length is about 2.09 inch. Cross reference number: 7440, 7441, 7443, 7443LL, W21/5W, 7443/26201, 78660, 78661, 17919, 7515, HIB7443WM, W21W, 7440/26200, 17632, 7504, W3x16Q, 7440LL, etc.
- One Year Warranty Compatible with both standard type and CK/SRCK type. Voltage: 12V - 24V, built in stable current IC driver for longer lifespan.
- (Set of 2 Bulbs)54SMD 3014 & 3SMD 3030 high brightness chips per bulb,Working Voltage:9v-30v,Size: 2.08"x 0.88" x 0.71"
- Fits: 3056 3057 3057K 3057LL 3155 3157 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4057 4057LL 4057K 4114 4114LL 4114K 4157 4157LL 4157K 4157NA 4157NAK 5702A 5702AK 5702AK etc.Easy installation, plug and play.
- Application:Brake Lights,Tail Lights etc.Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage:Compatible for both CK/SRCK and Standard socket, non-polarity design.300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- Premium LED: 3157 LED reverse light bulbs with 3030 SMD 7 LED chips per bulb, with projector lens to maximize lighting output, unique 360 degree lighting design to enhance brightness
- Dual heat dissipation: aircraft grade aluminum heat sink with low temperature, rust resistance, bump resistance, no bulb out error, no flickering, strong light intensity and energy saving
- Easy installation: plug-and-play installation that fits right into original light housings, thin lamp shape, avert the situation of unable to install, convenient to replace
- Great performance: the high precision constant current of 3157 LED brake lights, built in intelligent IC driver, no uv light emission, no flickering, no IR radiation
- Fits: compatible for brake lights, tail lights, side marker lights, corner lights, blinker lights etc, replace for 3156, 3157, 3056, 4156, 3047, 3157A, 3057, 3357, 3457
- 【SUPER BRIGHT】 – Yorkim 3157 LED bulbs are powered by 18 pcs of high quality 5050 chipsets to offer ultra brightness for your vehicle. 360 degree lighting angle, no blind spot, super brighter than the stock yellowish halogen bulb, updates your car interior to a modern look
- 【SPECIFICATIONS】- Head diameter 18mm, Length 47mm, Voltage 12v, 6500K Xenon White. A 50w Load resistor(ASIN:B07KS6KMYG)might be needed to prevent error message when replace for Turn Signal Lights. You may also need a flasher relay to solve the fast blinker issue for some vehicles
- 【FITMENT】 - 3056 3057 3156 3157 4157, commonly used for backup reverse lights, brake lights, tail lights or turn signal lights.
- 【EASY TO INSTALL】 - Non-polarity design, simply plug and play. Not suitable for CK sockets.
- 【NOTE】 - Normally different LED bulbs are required for different parts of the same car (I.e. brake light, tail light, turn signal light, etc.). Although 3157 LED bulbs are most commonly used, they may not fit all parts of your car. Please check owner's manual to verify compatibility before purchase or send us a picture of your original bulb for our assistance on selecting the right product
- (Set of 2 Bulbs)54SMD 3014 & 3SMD 3030 high Brightness chips per bulb,Working Voltage:9v-30v
- Fits:1156 1003 BA15S P21W 1156A 1156NA 87 93 97 97A 97NA 199 631 1073 1095 1141 1195 1295 2396 3497 5007 5008 7506 12088 1295NA etc.Easy installation, plug and play.
- Application:Brake Lights,Tail Lights,Daytime Running Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage:Non-polarity design, 300% brighter than original halogen bulb,full Aluminum Housing with Projection lens for Maximum Light output, aircraft grade aluminum heat sink with Low temperature,built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- Package Content: 2 high power LED light bulbs
- Advantage: Non-polarity design,Compatible for both CK/SRCK and Standard socket. More than 300% brighter than original halogen bulb, full Aluminum Housing for better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption.
Last update on 2021-01-19 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2021-01-19 / Affiliate links / Images from Amazon Product Advertising API