| “This site contains affiliate links for which OEMDTC may be compensated” |
June 11, 2019 NHTSA CAMPAIGN NUMBER: 19V436000
Insufficiently Tightened Steering Shaft Bolt
An unsecured bolt may cause the steering wheel not to function, increasing the risk of a crash.
NHTSA Campaign Number: 19V436
Manufacturer Entegra Coach
Components STEERING
Potential Number of Units Affected 88
Summary
Entegra Coach (Entegra) is recalling certain 2020 Anthem and Cornerstone motorhomes. The steering shaft bolt may have been insufficiently tightened.
Remedy
Entegra will notify owners, and dealers will inspect the motorhome and tighten the steering shaft bolt, as necessary, free of charge. The recall began June 17, 2019. Owners may contact Entegra customer service at 1-800-517-9137. Entegra’s number for this recall is 9803435.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
STEERING BOX SLIP SHAFT BOLT TORQUE
| Bulletin Type: | UPCOMING RECALL | Publication Date: | Pre notification 6-6-2019 |
| Bulletin #: | YET TO BE ASSIGNED | Make: | Entegra |
| Job Code: | 9803435
Please hold claims until Recall number is assigned. |
Model(s): | Anthem Cornerstone |
| Flat Rate: | RC024Inspect only NO repair required .1hr RC025 Inspect and repair .3 hr | Model Year: | 2020 |
| Incident: | Steering Shaft bolt may not be torqued correctly at 55ft lbs. to prevent loss of steering. |
| Affected Units: | 2020 Anthem L14B8051-8064 L14F8051-8070 L14W8051-8067
2020 Cornerstone L16A8051-8052 L16B8051-8065 L16F8051-8054 L16W8051-8059 L16X8051-8053 L16Y8051-8054 |
| Misc. Tools & Supplies: | Torque wrench (Ft/Lbs
11/16 socket |
REPAIR INSTRUCTIONS
FIG 1: Open the generator compartment using the switch (arrow) inside the driver side front electrical compartment.
FIG 2: Bolt is located on the right side of the generator behind the washer fluid bottle (arrow).
FIG 3: Bolt location is circled in this photo.
FIG 4: Arrow is pointing to the Steering Slip Shaft bolt.
- Move wiring out of the way to see it.
- IF WHITE LINE RUNNING FROM BOLT HEAD TO THE NUT – NO REPAIR IS REQUIRED – BOLT WAS TORQUED TO 55FT LBS PRIOR TO SHIPPING.
FIG 5: IF WHITE LINE IS NOT VISIBLE PROCEED TO NEXT STEP TO COMPLETE REMEDY.
Bolt head size takes a 5/8” socket or wrench.
- Nut size takes an 11/16” socket
- Use a torque wrench and torque the nut to 55 ft./lbs.
- Mark the bolt with a white line as shown in photo to indicate the bolt has been torqued properly.
Retail Instructions to INSPECT THE STEERING SHAFT BOLT
FIG 1:
- Turn the ignition ON (the engine does not need to be running)
- Make sure there is an unobstructed area 3 feet in front of the motorhome.
- Open the generator compartment using the switch (arrow) inside the driver side front electrical compartment. Press and hold the switch until compartment is fully extended.
FIG 2:
- The steering shaft bolt is located on the right side of the generator behind the washer fluid bottle (arrow).
FIG 3:
- Bolt location is circled in this photo.
FIG 4:
- Arrow is pointing to the Steering Shaft bolt.
- Wiring harnesses may have to be moved aside to see it.
FIG 5:
- If there is a white line running from the bolt head to the nut as shown in the photo (large arrow), the bolt has been torqued to the proper spec and no further action is necessary.
- Close the generator compartment using the switch shown in Fig 1.
- Ignition must be ON to close the compartment (engine does not need to be running).
- Hold the switch, until the compartment closes completely.
- Turn ignition OFF.
- Complete Reply Form and return to Jayco Compliance.
IF WHITE LINE IS NOT PRESENT – THE BOLT WAS NOT TORQUED PROPERLY.
PROCEED TO THE NEXT STEP BEFORE YOU DRIVE YOUR MOTORHOME
CAUTION IS REQUIRED
The bolt threads visible in Fig 5, must be at least two threads past the nut for the locking feature to be engaged to ensure your safety to travel to a Dealer to have the bolt properly torqued at 55 ft. lbs.
If there are less than two threads showing past the nut, you must tighten with a 5/8” wrench on the bolt side / 11/16” on the nut size, till at least two threads are past the nut. This must be completed prior to moving your motorhome.
- Close the generator compartment using the switch shown in Fig 1. o Ignition must be ON to close the compartment (engine does not need to be running). o Hold the switch, until the compartment closes completely. o Turn ignition OFF.
- Complete Reply Form and return to Jayco Compliance.
- Contact Dealer for Service appointment for the Recall Remedy.
Safety Recall: 19V-436
June 17, 2019
IMPORTANT SAFETY RECALL
This Notice Applies to Your Recreational Vehicle «vin»
Dear Valued Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco has decided that a defect which relates to motor vehicle safety, exits in certain Model Year 2020 Anthem and Cornerstone Class A Motorhomes.
| Reason for this | The steering shaft bolt may not be torqued to 55 ft./lbs. as specified. An unsecured bolt could allow the steering wheel not to function, impacting drivability and increasing the risk of a crash. |
| Recall Remedy | Inspection is required to confirm the bolt is torqued to 55ft/lbs. When white line is NOT visible from the steering shaft bolt head to the nut, the bolt was not properly torqured prior to shipping. Special precautions are required prior to moving your motorhome. |
| What we need you to do immediately | Please read and follow the enclosed Inspection Instructions and return the Reply Form noting the results of the inspection. When applciable, contact an authorized Dealer to schedule an appointment to have this remedy completed free of charge. The recall remedy will take approxiamtly thirty minutes. |
If you had this repair completed prior to receipt of this recall notice, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall.
If you take your recreational vehicle to your dealer on the agreed service date and the dealer does not remedy this condition on that date or within three (3) days, please contact our Customer Service Department at 800-517-9137. If after contacting your dealer and Customer Service you are not able to have the safety defect remedied without charge and/or within a reasonable time, you may wish to submit a written complaint to the Administrator, national Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-3274236 (TTY: 1-800-424-9153): or go to https://www.safercar.gov. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We certainly regret this inconvenience; however, your safety is our most important priority.
Sincerely,
Entegra Coach
2 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| ENTEGRA | ANTHEM | 2020 |
| ENTEGRA | CORNERSTONE | 2020 |
10 Associated Documents
Defect Notice 573 Report
RCLRPT-19V436-3334.PDF 213.599KB
Loading...
Reload document 
Open in new tab
Remedy Instructions and TSB
RCRIT-19V436-6441.pdf 773.167KB
Loading...
Remedy Instructions and TSB
RCRIT-19V436-4761.pdf 637.973KB
Loading...
Miscellaneous Document – Retail Reply form FINAL – Copy
RMISC-19V436-8376.pdf 561.79KB
Loading...
Recall Acknowledgement
RCAK-19V436-9401.pdf 244.733KB
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-19V436-4508.pdf 51.116KB
Loading...
Miscellaneous Document – Retail Reply form FINAL
RMISC-19V436-0309.pdf 561.79KB
Loading...
Recall Quarterly Report #1, 2019-2
RCLQRT-19V436-2387.PDF 211.13KB
Loading...
Recall Quarterly Report #2, 2019-3
RCLQRT-19V436-9343.PDF 211.228KB
Loading...
Recall Quarterly Report #3, 2019-4
RCLQRT-19V436-4470.PDF 211.309KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V436&docType=RCL
- Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
- Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
- Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
- Accessories included: 1/2" Drive 5" long Extension Bar and 1/2" Drive to 3/8" Drive Reducer
- Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
- PORTABILITY: Torque wrench 1/2 inch drive has a durable case for portability or storage
- ADDED COMFORT: Bi-material handle for comfort and grip of the 1/2 torque wrench
- HASSLE FREE USE: Locking feature adjusts quick and easily for hassle free use
- QUICK IDENTIFICATION: Scales stamped into housing showing inch and metric torque settings
- Meets or Exceeds ASME Specifications
- PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
- DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
- PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
- COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
- 【High Precision&Quick Reading】: 3/8 torque wrench has high contrast and dual range scale( 5-45 Ft-Lb/6.8-61 Nm),making it clear and easy to read. We have professional torque wrench production technology, and after 20000 tests, the calibration error range of the torque wrench is ± 3%, making it an essential helper for you.
- 【Safe and Reliable Operation】: Equipped with a bidirectional drive ratchet head, torque can be measured clockwise or counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque.
- 【High Quality and Durable Material】: Made of hardened chromium vanadium steel alloy (Cr-V). At the same time, the bottom buckle tail plug adopts a red anodizing process to improve the product's oxidation resistance during use and enhance surface wear resistance. 72 tooth ratchet head, made of chromium molybdenum steel. High quality materials resist corrosion and are durable.
- 【Quick Torque Setting】: Simple and fast torque setting, pull down the locking knob and hold it down to rotate to the torque you need. Release the hand and the locking knob will automatically rebound to lock the torque value. And the designer referred to the appearance of the flashlight handle and designed a non slip and labor-saving knurled handle, making it more comfortable and easy to hold when using.
- 【Easy to Store and Widely Use】: You will receive the 3/8-inch drive click torque wrench with a sturdy plastic shell storage box, which is very delicate and durable. Torque wrench is suitable nuts and bolts on various occasions, such as bike, motorcycle, car spark, and is the best helper for you🎁. 🔔 And we provide 12 months warranty. If you have any questions, please feel free to contact us.
- 【3Pcs Torque Wrench Set】 The calibration error range is ±3%, each torque wrench has a calibration certificate. The 3-in-1 torque wrench set can meet your different needs. Including 1/4 inch 20-240in.lb, 3/8 inch 5-45ft.lb, 1/2 inch 20-160ft.lb.
- 【Safe & Reliable】 When the 1/2 torque wrench reaches the preset torque value, it makes a clear "click" sound, accompanied by an obvious hand vibration that reminds you no longer to apply force, prevent damage caused. 72-tooth reversible ratchet head, it can be used both clockwise and counterclockwise directions.
- 【Quick Release Button】 This 3/8 torque wrench has a quick release button with which accessories can easily be installed and removed, the accessories can grip and is not easy to fall down. It is more convenient to use. The torque wrench is made of CR-MO with a higher hardness.
- 【Easy to Set】First pull down the locking knob and hold it down and then start setting the desired torque value. Release the hand and the locking knob will automatically rebound to lock the torque value. If you do not use, please set the torque key to the minimal torque value.
- 【Widely Use】The torque wrenches can satisfy you in bicycle, motorcycle, car, truck and wheel screws, wheel nuts and in the device installation, electrical engineering, etc. We provide 12 months warranty. If you have any questions, please feel free to contact us.
- 🔧【𝐌𝐢𝐥𝐢𝐭𝐚𝐫𝐲-𝐠𝐫𝐚𝐝𝐞 𝐒𝐭𝐞𝐞𝐥】ETOOLAB torque wrench utilizes military-grade steel as its base material, coupled with professional surface rust protection methods tailored to usage habits. While ensuring user comfort, it enhances product strength, wear resistance, and rust resistance. offers a more comfortable experience and a longer lifespan!
- 👍【𝐄𝐚𝐬𝐲-𝐭𝐨-𝐑𝐞𝐚𝐝】The scale of this 1/2 drive torque wrench is laser-engraved, using a black background with white markings. dinamometrica de 1/2 ensures clear and easy readability of the scale, even in sunlight. With a dual-scale design, users can conveniently read torque values in two different units according to their preferences, without the need for conversion!
- ⚙️【±𝟑% 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 & 𝐒𝐢𝐦𝐩𝐥𝐞 𝐋𝐨𝐜𝐤𝐢𝐧𝐠 𝐑𝐢𝐧𝐠】Our torque wrench 1/2 drive meets the high precision standard of ±3% and comes with a traceable serial certificate. You can use it with confidence! Moreover, its graduation ring is tightly locked, with smaller incremental values, ensuring precise and consistent torque output even after multiple uses. This reduces the hassle of frequent adjustments. It is undoubtedly an excellent tool for your work!
- 🔊【𝐋𝐨𝐮𝐝 𝐂𝐥𝐢𝐜𝐤 𝐒𝐨𝐮𝐧𝐝】This torque wrenches has been upgraded to have a louder "Click" sound. We conducted over 25,000 tests to ensure that each product produces a click sound volume of no less than 45dB when the torque value exceeds 34 lbf·ft. When you hear the distinct click sound, it indicates that the preset torque has been reached, signaling you to stop applying force. You no longer need to worry about damaging your mechanical components.
- 💯【𝐔𝐬𝐞𝐫-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲】Our torque wrench set features a 72-tooth dual-directional ratchet head, allowing for easy operation in both clockwise and counterclockwise directions. It is designed with an adjustable locking ring, making it effortless to adjust the preset torque value. Additionally, it includes a quick-release head design, along with a 1/2" drive 5" long extension bar and 1/2" to 3/8" drive reducer, making it capable of tackling complex repairs even in tight spaces.
- Protective head bumper included
- Bi-Material grip for comfort during use
- Locking trigger to control the torque applied
- Forward and reverse torque capabilities
- Direct Torque trade; Technology on included sockets
- [Cr-V RATCHET HEAD] TICONN torque wrenches are made from hardened Cr-V alloy (Chrome Vanadium Steel) for the best performance and lifespan
- [HIGH ACCURACY] You can count on the inch pound torque wrench for repeated accuracy (±4%). The 45 teeth ratchet wheel is perfect for turning the torque wrench inch pounds in tight spots (8° turn). Choose the right bike torque wrench as you need!
- [EASY TO USE AND STORE] The high-contrast dual unit measurement is easy to read and set your desired torque. The knurled handle will offer non-slip operation. The torque wrench, extension rod, and adapter are well-stored inside the storage case.
- [WIDE APPLICATION] Our torque wrench set can be used in many applications in your daily life such as automobile maintenance, bike & boat repair, firearm assembly, and machinery troubleshooting.
- [TICONN BRAND QUALITY COMMITMENT] We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 12-month warranty. 100% Satisfaction Guarantee for risk-free shopping!
- 【8-in-1 Torque Wrench Set】 Includes 1/4, 3/8, 1/2 inch drive torque wrenches that meet your different needs. 5Pcs Adapter: 1/4"Extension bar(4''), 3/8"Extension bar(6''), 1/2"Extension bar(5''), 3/8" Universal Joint, 1/2" to 3/8" Adapter with a sturdy plastic case for storage and portability
- 【Dual range scale & High Precision】 1/4 inch 10-220in.lb/1-24.7Nm with 1 in.lb micro-adjustment, 3/8 inch 10-45ft.lb/13.6-61Nm with 0.25 ft.lb micro-adjustment, 1/2 inch 10-160ft.lb/10-227Nm with 1 ft. lb micro-adjustment. Each wrench undergoes strict and specialized instrument testing before leaving the factory to ensure accuracy within ±3% and is provided with a formal calibration certificate
- 【Safe & Reliable】 This torque wrench set has been upgraded to have a louder "Click" sound, ensuring a clear and stronger click sound when the torque value exceeds 5 Nm, subtler click at lower than 5 Nm. The distinct click sound indicates that the preset torque has been reached, signaling you to stop applying force
- 【Releasable & Dual Direction】These torque wrenches has a quick release button with which accessories can easily be installed and removed, the accessories can grip and is not easy to fall down. With 72-tooth reversible ratchet head, it can be used in both clockwise and counterclockwise directions
- 【High Quality and Durable】 The torque wrench ratchet head is made from hardened treated Cr-Mo Steel for longevity. Handle crafted from high-grade aerospace aluminum for durability, and corrosion resistance. All adapters are treated with phosphating, with stronger wear resistance and a longer lifespan
- 50Pcs Master Bike Tool: This kit includes a 1/4" drive torque wrench and comprehensive bit sockets: Hex 2-10, Torx 8-40, 6 Point 4mm-15mm, Pozi PZ0-PZ3, Slotted SL4 SL8, Robertson Square S1 S2 S3. Adapters: 1/4" to 3/8" Adapter, 1/4" Bit Holder, 1/4" Universal Joint, 1/4" Bit Adapter, 1/4" Drill Adapter, and 4-inch Extension Bar. Comes with a protective storage case.
- ± 3% High Precision: Accuracy error within ±3%, dual torque range scale of 10-220 lbf.in/1-24.9 nm, with 1 in.lb (0.1nm) micro-adjustment. Each bike torque wrench includes a calibration certificate with a traceable serial number. This inch pound torque wrench ensures that bolts and nuts are tightened to the correct torque, preventing damage from over-tightening.
- Reliable Click-Stop, No More Guess: Simply listen for the reassuring "Click" or feel it through the wrench handle when you've reached the pre-set torque value. This signals you to stop applying force, ensuring your items are safe and secure.
- 72-Tooth and Quick Release: Featuring a reversible 72 teeth ratchet head, this small torque wrench allows for dual directions with ease. The quick-release button ensures a secure fit and rapid socket swapping. Various bit sockets and 1/4 inch drive adapters provides great compatibility.
- High Quality and Durable: Exceeds ASME & DIN-ISO Standards. Crafted from high-strength Cr-V steel and aerospace Aluminum, ensuring durability, rust resistance, and corrosion resistance. Perfect for bicycle and motorcycle repair, E-bike, home maintenance. Great gift for bicycle enthusiasts or anyone in need of a reliable and durable tool.
Last update on 2024-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.