“This site contains affiliate links for which OEMDTC may be compensated” |
February 25, 2019 NHTSA CAMPAIGN NUMBER: 19V123000
Possible Reduced Brake Performance
The missing or improperly installed cotter pin may cause the actuator rod to detach, affecting brake performance and lengthening the distance needed to stop the vehicle, increasing the risk of a crash.
NHTSA Campaign Number: 19V123
Manufacturer Jayco, Inc.
Components SERVICE BRAKES
Potential Number of Units Affected 20
Summary
Jayco, Inc. (Jayco) is recalling certain 2019 Jayco Embark motorhomes built on a Spartan chassis, equipped with independent front suspension and front drum brakes. The cotter pins may be missing or improperly installed at the actuator rod of the front slack adjuster for the front brakes.
Remedy
Spartan has notified owners, and Spartan Service Centers will inspect and properly install the cotter pin or install any missing pins and adjust the brakes appropriately, free of charge. The recall began on February 28, 2019. Owners may contact Jayco customer service at 1-800-517-9137.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
SEOCONTENT-START
19V-123 19V-124 Spartan Chassis Recall February 2019 Page 1 of 1
Spartan Chassis Recall – Retainer and Cotter pins in actuator rod
Incident:
Retainer or cotter pins may not be installed correctly in the actuator rod of
the front brake slack adjusters; this could result in decreased braking
performance which could increase the risk of a crash.
Affected Units:
2019 Embark
K1NE0053-0055, 0058-0060, 0062-0063
K1NG0051-0056
K1NJ0051-0056
2019 Reatta
K1NE8051-8056, 8058-8063, 8065-8069, 8078
K1NG8051-8056, 8058-8068, 8070
K1NJ8051-8059
INSTRUCTIONS
Inspection by a Spartan Service Center is required to determine if the retainer pins are missing or if the
cotter pins are installed correctly.
Please call Spartan at 1-855-589-9836 to locate a qualified Spartan service center near you.
Jayco’s sole obligation under our limited warranty is to repair or replace defective materials and/or workmanship deemed our responsibility as determined
by Jayco in our sole discretion. Jayco reserves the right to use new and/or remanufactured parts or materials of similar quality to complete any work, and to
make parts and/or design changes as appropriate without notice to anyone. Jayco designs and/or materials changes are done without obligation to
incorporate such changes in previously manufactured product. Jayco makes every reasonable effort to ensure field remedies will not adversely affect
performance and/or safety of the unit. This field remedy is not intended to extend to future performance of this RV, or any of its materials, components or
parts beyond the standard warranty period. The RV owner’s obligation to notify Jayco, or one of its independent, authorized dealers, of a claimed defect
does not modify any obligation placed on the RV owner to contact Jayco directly when attempting to pursue remedies under state or federal law. Jan. 2019.
903 South Main Street • P.O. Box 460 • Middlebury, IN 46540
Bulletin Type: RECALL
RECALL #(s): 19V-123 – Embark
19V-124 – Reatta
Job Code(s): NA
Flat Rate(s): NA
Publication Date: February 2019
Make(s): Jayco / Entegra
Model(s): Embark / Reatta
Model Year(s): 2019
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
JAYCO | EMBARK | 2019 |
3 Associated Documents
Remedy Instructions and TSB
RCRIT-19V123-9165.pdf 499.513KB
Defect Notice 573 Report
RCLRPT-19V123-6553.PDF 212.819KB
Recall Acknowledgement
RCAK-19V123-7942.pdf 245.613KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V123&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- Material: 304 stainless steel, smooth surface, no burr, corrosion resistance, rust prevention, durability.
- Packaging includes:There are 13 sizes in the cotter pin clamp combination kit, totaling 160pcs. Hairpin Cotter Pin(111pcs): M1.5x25mm x 23pcs, M2.5x25mm x 20pcs, M2.5x30mm x 20pcs, M3.2x30mm x 20pcs, M3.2x40mm x 20pcs, M4x60mm x 8pcs; R Clips Cotter Pin(89pcs): M1x16mm x 20pcs, M1.2x21mm x 20pcs, M1.6x28mm x 20pcs, M1.8x35mm x 10pcs, M2x40mm x 10pcs, M2.5x50mm x 5pcs, M3x65mm x 4pcs.
- Product features: Cotter pin can quickly and safely fix all kinds of nuts and bolts, which can prevent the relative rotation of nuts and bolts.
- Easy to use:All Cotter Pin are packed in reusable boxes for easy to carry and manage, can meet your different needs.
- Application: Widely used in car mechanics, lawn mowers, machinery, workshops, trucks, small engine repair, etc.
- [APPLICATION]: The wire formed pins are used as a pin locking device to hold pins or castle nuts in place in automotive, axles, trailer hitch and tractors, and are highly versatile fasteners.
- [PREMIUM QUALITY]: Each high-quality pin is constructed with zinc plated steel that stands the test of time, and ensures that replacements are not needed for your fastening jobs.
- [EXTREMELY DURABLE]: The heavy duty material allows for durability while the hair pin style design gives a fast and secure hold for bolts to ensure stability.
- [SECURE DESIGN]: The specialty lock ensures a tight lasting hold and comes with a key that opens four types of lock.
- [CONVENIENCE]: Every set comes with a see-through resealable storage case storing all material together for portability, organization, and is easy to identify size markings.
- ☛Product Type: High quality cotter pin clip key fastner fitting assortment kit
- ☛Material: 304 Stainless Steel, Corrosion Resistant and Anti-rust, Moist Environments Can Also Be Used
- ☛ Package: 6 sizes of M1.5*25, M2.5*25, M2.5*40, M3.2*30, M3.2*40, M4*60 total 100pcs in a clear box, can meet your different needs
- ☛Product Feature: The cotter pin with hair pin style design gives fast and secure hold for bolts and pins, specialty locks to ensure tight hold that will last long
- ☛Easy To Use, Used to Automotive, Mechanics, Car Garage, Workshop, Power Equipment, Cars, Trucks, Lawn Mower, Small Engine Repair, Fastening
- √【Kindroufly Combination】: M1.6x25 (30 pieces), M2.5x25 (30 pieces), M2.5x40 (20 pieces), M3.2x30 (20 pieces), M3.2x40 (10 pieces), M4x60 (10 pieces) cotter pins, total 120 pieces, different sizes and enough quantities can meet your different daily needs.
- √【High Quality Stainless Steel】: Kindroufly cotter pins are made of 304 stainless steel, which have smooth surface, high strength, not easy to deform, corrosion resistance and rust resistance, can ensure a long time using in bad environment like high temperature, cold weather, and high humidity areas.
- √【Cotter Pins Kit Function】: Kindroufly cotter pins with hair pin style design gives fast and secure hold for bolts and pins, specialty locks to ensure tight hold that will last long. When the nut is tightened, put cotter pins into nut groove and the tail hole of the bolt, and pull off the tail of the cotter pin, prevent the relative rotation of the nut and the bolt that can complete installation.
- √【Multi-functional Storage Box】: All Kindroufly 120 pieces stainless steel cotter pins are packed in a solid transparent storage box. we put 6 sizes cotter pins in 5 grids , each size are marked with a clear label. It is very convenient for you to choose size, easy to carry and store, which can save your time and energy.
- √【Widely Applications】: Kindroufly 120 pieces stainless steel cotter pins assortment kit are widely used for automotive, mechanics, car garage, workshop, power equipment, cars, trucks, lawn mower, small engine repair and fastening, etc. If you have any questions about our products, welcome your inquiry and we will solve the problem for you in time.
- Package Included: 4 Pcs M1*16 mm length Cotter Pins, 4 Pcs M1.5*30mm length Cotter Pins, 4 Pcs M2*40 mm length Cotter Pins, 4 Pcs M2.5*50 mm length Cotter Pins, 4 Pcs M3*65 mm length Cotter Pins
- Quality: These high-quality trailer hitch pins are zinc plated and constructed to last a lifetime. Manufactured to ensure that long lasting life, so replacements are not needed.
- Design: These R clips adopt hairpin design, can fast, safe and effective lock bolt, prevent relative rotation, durable.
- Material: Heavy duty and zinc plated steel allows for durability and is corrosion resistant while its hair pin style design ensures fast and secure hold for bolts for greater stability.
- Versatility: Specialty lock ensures a tight fitted and lasting hold and comes with a key that opens four types of lock. Suitable for use with Tractors, Farm Equipment, Trucks, Cars, Campers, Lawn and Garden Equipment. etc.
- Cotter Pin Clips Fastener used to secure two components where a range of movement is needed.
- MATERIAL: Made of high quality 304 stainless steel, Sturdy and durable, Corrosion resistance and anti-rust, Can also be used in moist environments.
- FEATURE: With hair pin style design, can fast, safe and effective lock bolt to prevent relative rotation, specialty locks to ensure tight hold that will last long.
- APPLICATION: Widly use in Tractors, Farm Equipment, Trucks, Cars, Campers, Lawn and Garden Equipment, and other Hitch Pin Lock Systems.
- PACKAGE: Include 5 sizes hair pin clips: 4 PCS M1.5 x 25mm, 4 PCS M 2 x 30mm, 4 PCS M2.5 x 40mm, 4 PCS M3 x 60mm, 4 PCS M4 x 80mm.
- 1. Product Type: High quality cotter pin assortment kit
- 2. Material: Zinc plated steel, Corrosion-resistant to ensure long time use
- 3. Package: Include 6 widely used size of 1/16” x 1”, 3/32” x 1”, 3/32” x 1”-1/2”, 1/8” x 1-1/4”, 1/8” x 2”, 5/32” x 2-1/2”
- 4. Product Feature: The hair pin style design gives fast and secure hold for bolts and pins that way your work never gets undone
- 5. Application: Widely used for automotive, mechanics, car garage, workshop, power equipment, cars, trucks, lawn mower and etc
- ✅Sufficient quantity:You will receive 120pcs cotter pins and packed in the exquisite plastic box,including M1.6x25-30pcs, M2.5x25-30pcs, M2.5x30-20pcs, M3.2x30-20pcs, M3.2x40-10pcs, M4x60-10pcs
- ✅High-Quality Material: Our cotter pins are made of premium 304 stainless steel, ensuring durability and long-lasting performance. (304 stainless steel belongs to austenitic stainless steel. Austenite is partially or slightly transformed into martensite during cold heating. Martensite is magnetic, so 304 stainless steel is micro-magnetic)
- ✅Assortment of Sizes: This cotter pin set includes 6 different sizes, providing versatility and meeting various needs for securing bolts and pins in mechanical applications.
- ✅Smooth Surface: The cotter pins feature a smooth surface finish, minimizing the risk of snags or damage to the surrounding components.
- ✅Strong and Reliable: These cotter pins are designed to withstand heavy loads and provide secure fastening, ensuring the safety and reliability of your machinery or equipment.
- 【Larger and Thicker】Large Size: 3mm wire diameter, 60mm length.The large size perfect for trailer hitch pins. Thicker than the original pin that came with the hand truck/dolly.
- 【High Quality 4.8 Carbon Steel】R clips retaining pins are made of high-quality 4.8 carbon steel. Advanced zinc plating-black Technology effectively prevents rust and ensure smooth surface without burr. The cotter pins suitable for indoor, outdoor working environment.
- 【Strong Elastic Hairpin Design】Because of a strict metal composition and consummate casting skill, the hitch pin clips have high hardness and strong spring tension. The pin will not be easily removed when the clip is in place. Furthermore, once these are in place they last. Hairpin design: fast, Safe and effective locking bolt, uniform force, not easy to slip, used to prevent relative travel, will not fall off, easy installation and disassembly, reusable.
- 【Sturdy and Handy】Great clips,heavy weight enough. Even when you suspend a heavy RV by these, they won't shear or break, no matter how much they are pulled, yanked, twisted, or jerked. For tow bar and for other equipment around our farm. Perfect for lawn mower tire or riding mower and carts.
- 【Perfect cotter pin replacement】Replacing hitch pins on most equipment that came with weaker pins, essential for trailer ball pins,dolly pins,keeper pins, retainer pins hitch,hand truck pin replacement,tractor cotter pins,trailer pin clips,hand truck pin replacement. Applicable to all kinds of machinery, tractors, farm equipment, engines, trucks, cars, camper vans, lawn and garden equipment, etc. You can upgrade all your tractor and truck hitches.
- ☛Product Type: High quality cotter pin clip key fastner fitting assortment kit,cotter pins will be a good choice to replace weaker pins on most equipment,for lost pins on your trailer, tow bar and other equipment around our farm.
- ☛Material:Heavy duty material allows for durability,not easy to rust, break or deform, polished surface and no burr, safe for your daily use.while hair pin style design gives fast and secure hold for bolts to ensure stability
- ☛Cotter Pins Set Size:This cotter pin assortment kit 6 sizes of 1/16"x1"---150pcs and 3/32"x 1"---150pcs , 3/32"x1-1/2"---100pcs, 1/8"x1-1/4"--75pcs , 1/8"x 2"--50pcs, 5/32"x1-1/2"--30pcs.Total 555pcs in a clear box,can meet your different needs.
- ☛Widely Application:Easy To Use, Used to Automotive, Mechanics, Car Garage, Workshop, Power Equipment, Cars, Trucks, Lawn Mower, Small Engine Repair, Fastening.
- ☛ 100% Satisfaction Assurance ---- We provide 24 Hour service time for you, if you come across any issues about our products, please feel free to contact me by email.
Last update on 2024-03-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.