Tire Carrier Affecting Lighting/FMVSS 108, 111 – Poison Spyder Customs-Brand Tire Carriers

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA Campaign Number: 18E117
Manufacturer TAP Worldwide, LLC
Components EQUIPMENT
Potential Number of Units Affected 114

 

Tire Carrier Affecting Lighting/FMVSS 108, 111

Without a high-mounted brake light, the warning given to others that the vehicle is slowing or stopping may be limited. If the rear camera is inoperable, the driver may have reduced visibility of what is behind the vehicle. Either condition can increase the risk of a crash.

 

Summary

TAP Worldwide, LLC (TAP) is recalling certain Poison Spyder Customs-brand Tire Carriers, part number 19-62-030TP1, sold as aftermarket parts. These Tire Carriers may not provide a license plate lamp or center high-mounted brake light and may also cause the rear visibility camera system to be inoperable. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, Reflective Devices, and Associated Equipment,” and number 111, “Rearview Mirrors.”

 

Remedy

TAP will notify owners, and dealers will replace the Poison Spyder Tire Carrier, free of charge. The recall began February 12, 2019. Owners may contact TAP customer service at 1-888-376-1417.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 


RECALL NO. 18E-117

IMPORTANT SAFETY RECALL

This notice applies to your Poison Spyder Frame Mounted Tire Carrier, part number 19-62-030TP1. This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.

Date: February 12, 2019

Dear Valued TAP Worldwide, LLC Customer,

 

REASON FOR NOTICE

TAP Worldwide, LLC has decided that the above-referenced Poison Spyder Frame Mounted Tire Carrier does not comply with FMVSS 108 because the product does not provide a license plate lamp and could interfere with the center high-mounted stop lamp positioning. An inoperable center high-mounted stop lamp may not properly alert following vehicles that the driven vehicle is coming to a stop, which could increase the risk of a crash.

TAP Worldwide, LLC has also determined that the above-referenced Poison Spyder Frame Mounted Tire Carrier does not comply with FMVSS 111 because the product renders the rear visibility system (back-up camera) inoperable. Because the rear visibility system does not operate as intended with the Poison Spyder Frame Mounted Tire Carrier installed, there could be an increased risk of death or injury resulting from a back-over incident if the driver of the vehicle does not check his or her surroundings before reversing.

 

WHAT SHOULD YOU DO

You should contact TAP Worldwide, LLC’s Recall Parts Assistance Department by phone at 1888-376-1417 or by email at recallpartsassistance@4wp.com immediately to identify the recommended service facility closest to you that can provide and/or install a replacement Poison Spyder Frame Mounted Tire Carrier (or provision which corrects the issues referenced above). Alternatively, you may request that the replacement Poison Spyder Frame Mounted Tire Carrier (or provision which corrects the issues referenced above) be sent to your home address, so that you can install it yourself using the attached instructions.

 

WHAT WE WILL DO

TAP Worldwide, LLC has created a replacement Poison Spyder Frame Mounted Tire Carrier and a provision that will include the original equipment back-up camera and will not interfere with the license plate lamp or center high-mounted stop lamp, free of charge. The replacement parts will be available starting February 15, 2019.

 

REIMBURSEMENT

If you have already paid to address the issues covered by this recall, you may be eligible to have those costs reimbursed. Requests for reimbursement may include the cost(s) of parts, labor, fees and taxes; however, expenses for inconvenience you may have suffered due to the loss of use of your vehicle will not be reimbursed. Reimbursement will be limited to the amount the repair would have cost if completed by an authorized service facility.

To be eligible for reimbursement:

  • You must have had the subject part repaired before receiving this notice, and
  • You must have owned the vehicle at the time of repair.

NOTE: You will still be eligible for reimbursement even if you no longer own the vehicle.

Your reimbursement claim will be acted upon within sixty (60) days after receipt. If your claim is approved, you will receive a check in the mail. If your claim is denied, you will receive a letter setting forth the reason(s) for the denial. If your claim is deemed incomplete, you will receive a letter identifying the supplementation needed to complete the claim, and you will be offered an opportunity to resubmit it.

To file a claim for reimbursement, please contact the TAP Worldwide, LLC Recall Parts Assistance Department toll free by phone at 1-888-376-1417 or by email at recallpartsassistance@4wp.com. Please be prepared to provide the following information:

  • Your name;
  • Your mailing address;
  • Your e-mail address;
  • Your phone number;
  • The applicable recalled part name and/or number;
  • The date(s) the repair was performed; and
  • The amount of the reimbursement you are requesting.

Please also be prepared to submit original or clear copies of all receipts, invoices, and/or repair orders showing:

  • The name and address of the person who paid for the repair;
  • The part name and number of the item that was repaired;
  • The 17-digit Vehicle Identification Number of the vehicle that was repaired (if applicable);
  • The total cost of the repair expense that is being claimed; and
  • Proof of payment for the repair in question and the date of the payment.

Failure to include proper documentation may delay your reimbursement. Alternatively, you may fill out the Claim Form enclosed with this recall notice and submit it, together with the documentation referenced above, by mail to the address listed in the Claim Form. If you have questions, please call the TAP Worldwide, LLC Recall Parts Assistance Department toll free at 1888-376-1417.

 

CONTACT INFORMATION

If you have any questions regarding this matter, if you have any problems obtaining the needed repair and/or reimbursement, or if you believe that the repair has not been made within a reasonable period of time, you may contact us by phone at 1-888-376-1417, by email at recallpartsassistance@4wp.com, or by mail to the following address:

TAP Worldwide, LLC
Attn: Recall Parts Assistance
400 West Artesia Boulevard
Compton, California 90220 USA

If, after contacting TAP Worldwide, LLC, you still have a problem getting this repair made within a reasonable period of time and/or without charge, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., SE., Washington DC 20590; or call the toll-free Vehicle safety Hotline at 1-888-327-4236 (TTY: 1800-424-9153); or go to https://www.safecar.gov. If you are a vehicle lessor, federal law requires that you forward a copy of this recall notice to the lessee within ten (10) days.

Your continued satisfaction with our products is important to us. Please understand that we have taken this action in the interest of your safety and your vehicle’s proper operation. We regret any inconvenience that this action may cause you.

Sincerely,

TAP Worldwide, LLC


Owner Notification Letter

February 12, 2019

https://static.nhtsa.gov/odi/rcl/2018/RCONL-18E117-4502.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [4.89 MB]

 


Recall Acknowledgement

February 8, 2019

https://static.nhtsa.gov/odi/rcl/2018/RCAK-18E117-3744.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [239.50 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18E117&docType=RCL


 

Bestseller No. 1
GADFISH Spare Tire Carrier,Spare Tire Mount Boat Trailer Carrier Bracket,Heavy Duty Lock Holder,Fits 4 & 5 & 6 Lugs Trailer Wheels on 4", 4.5'', 4.75'', 5'' and 5.5'' Bolt Patterns,Holds up to 150 Lbs
  • 【150 LBS HEAVY DUTY】This spare tire bracket is reinforced with an upgraded triangular structure welded together, with a sturdy rectangular behind plate that holds the steel beam firmly in place and holds up to 150 Lbs.
  • 【WIDE APPLICABILITY】Our spare tire carrier compatible with 4 lug X 4" diameter hole pattern, 5 lug X 4.5"/4.75“/5” diameter hole pattern, and 6 lug X 5.5" diameter hole pattern. Because of its universal compatibility, it is also suitable for boat trailers.
  • 【Robust Construction】Once the screws are tightened, your spare tire mount will no longer have the risk of losing a tire. The industrial solid iron and sandblasting process gives it a durable, smooth and attractive surface so you don't have to have bumpy roads.
  • 【EASY TO INSTALL】Features a sloping and raised design concept to reduce wind resistance and low clearance to the ground, firmly lock the tire. Different length bolts, no drilling required, just need a wrench, make installation and removal a breeze and you can choose the height of the steel beam yourself.
  • 【WORRY-FREE VOUCHSAFING】GADFISH Spare tire carriers comes with 18 months of support and are rigorously tested before shipment. Please feel free to contact us if you have any questions regarding Carrier installation. We will definitely give you a satisfying solution.
Bestseller No. 2
MaxxHaul 50214 Spare Tire Carrier for Utility Trailer Tires
  • Holds 4-lug (4 on 4" bolt pattern) and 5-lug (5 on 4-1/2" bolt pattern) trailer wheels and not compatible with 5 on 4-3/4" or 5 on 5" bolt pattern
  • Mounts on trailer tongues up to 3 inch wide and 5 inch high
  • Angled and raised mount design makes this ideal for boat trailers as well
  • Durable powder coat finish to resist rust and corrosion
  • Zinc plated mounting hardware
Bestseller No. 3
DIYIIRON Wall Mount Spare Tire Carrier for Trailer,Spare Tire Carrier Bracket for Enclosed Trailer,Universal Wheel Bracket Trailer Spare Tire Mount,Fits Most Tire
  • 【Function】The wall mount spare tire carrier is used to mount to the wall of the trailer to hold the spare tire,easy to install and fits most spare trailer tires
  • 【Tough Construction】Made of heavy-duty steel, stronger and will not wobble;with a galvanized surface,which is heat and corrosion resistant,and hold max load up to 120 lbs
  • 【New Design】The trailer tire carrier bracket equipped with two lengths of bolts to fit different size tires.The fixed plate is widened to 2.4 inches,making the bracket more secure and not easy to loose.The wing nut can better lock the tire, prevent it from falling off, and be easy to remove
  • 【Easy to Install】The spare tire carrier is easy to install and remove, no need to buy other accessories, you can install according to our picture.When not in use, you can easily remove the bolt,save your space and keep tidy.
  • 【Package Include】Carrier Bracket*1, 6inch long bolt*1, 4.5inch short bolt*1, screws*4, washers*2, hexagon nut*1, wing nut*1,locking nut*1
Bestseller No. 4
VONLX U-Bolt Spare Tire Carrier Holder Bracket for Trailer Side Mount 4 or 5 Lug Zinc Plated Fit for Ski Boat, Fishing Boat or Sailboat Trailer
  • [Specification] U-bolt tire carrier bracket fits trailer frames up to 2" or 3" wide (up to 4" high) and up to 15" tires. For 4 or 5 lug wheels (bolt style: 4 to 4 or 5 to 4 -1/2).
  • [High Quality Material] U-bolt trailer spare tire mount is made of 8.8 grade thick steel, which can bear heavy objects and resist deformation. The galvanized coating on the surface is durable and rust-proof, and it is not afraid of bad weather.
  • [Easy to Install] This spare tire holder can be easily installed to secure the tire. Just put the bolts into the throat of the trailer and tighten. The spare tire is mounted on the side of the trailer protector.
  • [Function] U-bolt spare tire bracket for trailer is a simple solution for hauling spare trailer tires.
  • [Package includes] 1 x U-bolt and 2 x lug nuts.
Bestseller No. 5
Extreme Max 3004.4553 Economy Spare Tire Carrier
  • Heavy-duty, welded, reinforced zinc-plated steel construction
  • Fits 4 hole rims with 4" bolt circle patterns and 5 hole rims with 4.5" bolt circles
  • Designed for front or mid-trailer mounting
  • Easy-to-install bolt-on design - No cutting or drilling
  • All mounting hardware included - Two-year replacement warranty
Bestseller No. 6
Spare Tire Carrier Zinc Plated U-Bolt Holder Bracket Side Mount for 4 or 5 Lug
  • Fitness: Fits trailer frames up to 2" or 3" wide (up to 4" tall), fits up to 15" tires;For 4 or 5 lug wheels (bolt pattern: 4 on 4 or 5 on 4-1/2)
  • Package:1 Premium Spare Tire Carrier U-Bolt Bracket with nuts;
  • Spare tire is mounted along side of trailer (to prevent damage);
Bestseller No. 7
AUTODUNK Spare Tire Mount Bracket for Trailer, 120LBS Weight Capacity, Fits Most 4 & 5 Lugs Wheels on 3.94″, 4″, 4.25″ and 4.72″ Bolt Patterns
  • AUTODUNK Trailer Spare Tire Carrier is fit for trailer tongues to 2.95″wide and 3.94″ high, To hold 4-lug and 5-lug wheels with 3.94″, 4″, 4.25″ and 4.72″ bolt patterns
  • Designed to hold max load up to 120 lbs, and galvanized material is rust and corrosion
  • The bolt-on installation and removal is easy. No drilling is required for installation. We come with detailed installation instructions
  • The close-to-trailer design helps reduce wind resistance. Features raised design that moves the wheel up for increased ground clearance
  • Package includes zinc plated mounting hardware, you don’t have to buy bolts and nuts separate. AUTODUNK worry-free 18-month warranty and friendly customer service
SaleBestseller No. 8
VEVOR Spare Tire Carrier, Trailer Spare Tire Mount, 160 lbs Capacity, Utility Trailer Accessories Fits Most 4 & 5 & 6 & 8 Lugs Wheels on 4", 4.25", 4.5", 4.75", 5", 5.5", 6", 6.5" Bolt Patterns
  • Versatile and Application-Friendly: This trailer spare tire carrier is designed to fit a wide range of wheel sizes, making it suitable for various applications. It is compatible with 4x4", 5x4.25", 5x4.5", 5x4.75", 5x5", 5x5.5", 6x5.5", 6x6", and 8x6.5" diameter hole types.
  • Quick and Effortless Installation: Installing this spare tire mount is a breeze. You'll only need one wrench, and there's no drilling required. The spare trailer tire mount adopts a bolt inclined fixed protrusion design, which firmly locks your tire, reduces wind resistance and keeps away from the ground clearance.
  • Double-sided Stiffeners: The trailer tire mount is made of high-quality wrought iron, and the solid structural design can withstand up to 160 pounds. With a durable black powder coating finish, this trailer spare tire mount is specifically designed to resist rust and corrosion, and is the best choice for outdoor use.
  • Completed Accessories: Say goodbye to the hassle of searching for separate mounting hardware. This spare tire carrier comes with galvanized mounting hardware included in the package. Knowing that all the necessary components are provided for a seamless installation experience, you can have peace of mind.
  • Perfect Compatibility: Designed specifically for trailer tongues, including marine trailers, this trailer tire mount is engineered to fit perfectly. You can be confident that it will securely accommodate your spare tire, ensuring a snug fit for your trailer.
Bestseller No. 9
Extreme Max 3005.3732 Universal Easy-Mount Wall Mount Spare Tire Carrier for Enclosed Trailers - Includes Two Bolts Sizes for Custom Fit Compatibility
  • Universal fit for most spare trailer tires
  • Holds tire tight and flush against the inside wall of an enclosed trailer
  • Aluminum-constructed bracket with zinc-plated steel bolts
  • Contains two bolt lengths, 4" and 6", featuring an American 1/2" x 13 full thread
  • Two-year warranty
SaleBestseller No. 10
Foozet Spare Tire Mount for Trailer, Spare Tire Carrier, 120 LBS Weight Capacity Heavy-Duty Spare Tire Carrier Compatible with 4 & 5 & 6 Lugs Wheels on 4", 4.5'', 4.75'', 5" or 5.5" Hole Patterns
  • TRAILER SPARE TIRE MOUNT - Trailer Accessories Compatible with 4 lug X 4" diameter hole pattern, 5 lug X 4.5"/4.75“/5” diameter hole pattern, and 6 lug X 5.5" diameter hole pattern.
  • TRAILER COMPATIBILITY - This spare tire carrier is designed to fit trailer tongues, including boat trailers’, to 1.5 to 3.5"wide and 2 to 4" high.
  • HEAVY DUTY CONSTRUCTION - This trailer spare tire mount with thick galvanized steel. The extra heavy duty welded steel construction for worry free trailering.Also very sturdy not likely to fall apart
  • OPTIMIZED DESIGN : 1 - This spare tire carrier with Double-nut prevent one of them from loosing,no fear of losing the tire on the road. 2 - First Spring-sheet lock the Carriage screw and bracket ,and then install the tires. You can easily install the cone nuts fixing the tire.
  • HARDWARE ATTACHMENT - For this spare tire bracket of trailer, you can choose different lengths of screws according to the size of the steel beam of your frame.

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...