“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V733
Manufacturer Forest River, Inc.
Components EXTERIOR LIGHTING
Potential Number of Units Affected 26
Side Marker Lights in Wrong Location/FMVSS 108
Reduced visibility of the fifth wheel can increase the risk of a crash.
Summary
Forest River, Inc. (Forest River) is recalling certain 2019 Forest River Primetime Impression fifth wheels, model MPF3000RLS-49. The side marker lights are not located in the correct spot, reducing visibility of the vehicle to other drivers. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Forest River will notify owners, and dealers will remedy the vehicles, free of charge. The recall is expected to begin in October 2018. Owners may contact Forest River customer service at 1-574-862-1025. Forest River’s number for this recall is 49-0891.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Acknowledgement
October 25, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V733-6678.pdf
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V733&docType=RCL
- 12V,universal design for all cars, SUV, pickup,truck,trailer,boat etc.
- 3 LED lens inside of the lamp offer extreme bright light. SAE P2 PC,DOT. Waterproof Lens,sealed Light
- It can be used as clearance Lamps, side marker or identification light,Trailer Light etc. 3 colors of light for your choice: amber,white,red.
- Easy to install and durable.With our strict quality control system, we test each item and 100% ensure in good condition before we ship.
- Warning: Wires come out from the conner, NOT from the center. (Check image 2)
- Partsam (7) Amber + (7) Red Oval Oblong Side Marker Light Lamps; It is Universal For all auto esp. RV Trailer Camper Boats etc. 【Tip: wires were brought out at the lower corner of the light and not the center,】
- Can be function as Side Marker Lights, Clearance Lamps and Indentification Lamps, Trailer Lights etc.
- About 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1" oval oblong rectangular rectangle led light sealed
- Tiger Eye / Double Bubble LED Marker Lights; Led Marker TRAILER LIGHTS EXTERIOR LIGHTS; LED running lights Side fender lights side body lights. bullseye led side fender marker lights; Trailer-Style Rectangular LED Marker OR Turn Signal Lights
- Adequate in quantity: the package comes with a total of 10 pieces of LED trailer marker lights, including 5 red and 5 amber; Each trailer side marker light includes 2 pieces stainless steel screws for surface mounting
- Easy method to operate: the wires of led trailer lights come out from the center, not the corner ; What's more, red is the positive electrode and black is the negative electrode, the installation can be completed by tightening the screw
- Match diverse cars: these 12V trailer marker lights are suitable as LED marker lamps, car side lamps, trailer lamps for many kinds of cars, such as trucks, trailers, boat trailers, RVs, and more
- Waterproof design: our RV trailer lights are designed with totally enclosed circuit, waterproof and can keep away from dirt; In addition, the lenses are not easy to fade due to exposure to sunlight and rain water, bringing you a nice experience
- Lasting and serviceable: each RV signal light is made of quality LED and plastic, not easy to deform and break, and can use for a long time; The surfaces of these lights are smooth and comfortable to touch, do not need to worry about scratching your fingers
- Brand: TMH with 1 Year Premium Warranty
- Pack of 20 pcs : 3/4 inch 10 Amber + 10 Red Light Round Bullet Miniature side marker
- Brightness : 60 lumen each light with 3 pcs High Quality SMD LED 100,000hrs Lifetime
- PC lens + Waterproof + Shockproof + Dustproof
- Easy to install with FREE High Quality Rubber Cover , No crack forever
- Partsam (1 x Red ) Waterproof truck trailer Identification Light Bar, long-lasting stainless steel black bracket base, stainless hardware included. three-light, 3-LEDs each marker light, totally 9LEDs, Red Lens Red LED Light; This Truck Trailer ID Light bar is great for trailer applications more than 80" wide;
- This red clearance light bar is sealed and waterproof. Size: 350mm x 30mm x 26mm (14.17" x 1.18" x 1.1"); Hole distance: 212mm (8.50"); Installation scews are included. This IP67 Waterproof trailer light bar is always ready for different kinds of weather attack, and also withstand the invasion and corrosion of sand, dust, dirt, water, snow and other impact of inclement weathe;
- EAST TO INSTALL: The red strip light bar contains a single lead wire for power and is grounded through the mounting hardware. Anyone of the three screws is the Negative and Red wire is the Positive end;
- Three replaceable 3-LED trailer light bar is universal for 12V Vehicles: Trucks, trailers, travel trailer, boat trailer, horse trailer, camper trailer, cargo trailer, RV, motorhome, pickups etc.; You can mount this 3 led light bar on the top of your truck trailer or between the tailgate taillights to draw extra visibility to your wide trailer for added on-road safety;
- Warranty: We truly offer 1 year warranty for this 12v led light bar! If have any questions or issues about our Partsam led lights, Please feel free to us and we will reply in 24 hours;
- featured functions: used as led marker light at front rear side roof top or led clearance light indicator light on any 12v pickups truck trailers suv rv van caravan camper boat lorry bus etc.
- upgraded leds: use 3 quality piranha led, featuring better heat dissipation, wider lighting angel, higher light intensity, and longer lifetime, make the light super durable and outputs excellent amber or red light.
- awesome reflector design: the marker light employs a micro-reflex faceted reflector design, increasing the light output and adding on an exquisite appearance.
- highly sealed: lens and housing are sonically welded as a whole unit, inside leds are also surface-sealed. be ready for all weather abuse.
- simple installation: black wire for ground, red wire for positive. just fix the black base with the flat head screws provided, and then snap the light into the base. to run through the back wire lead, you can either drill a center hole, or use some washers when fixing the base, so you can get space to run the wire lead without drilling center hole.
- Excellent Brightness: Each light comes with 6PCS high intensity 2835 SMD LED, outputs excellent bright 120LM light for perfect marker light
- Awesome Seal: Decently sealed at both front lens and back wire lead. Compared with other brands, our back wire lead is added proper glue to make it completely seal without affecting the surface mount
- Simple Installation: 2 wire connection, yellow/red for positive, black for negative. 3 steps of light mounting: Mark and drill holes according to the foam tape base provided; Peel and stick the foam tape to the light; Run through the wire lead to the center hole and use bolts and nuts to fix 2 sides. Center hole might not be necessary if use some washer under the foam tape base when fixing the two sides
- Widely Used: Ideal for most 12V trailer, buses, trucks, trailers, lorries, RV, boat as led marker light clearance light indicator Light
- Package Include: 5 pack of amber + 5 pack of red side marker light, include a hardware pack and foam tape base. 2 Years Warranty Honored by Nilight.
- Brand: TMH with 1 Year Premium Warranty
- Pack of 50 pcs : 3/4 inch Amber Light + Amber Lens Round Bullet Miniature side marker
- Brightness : 60 lumen each light with 3 pcs High Quality SMD LED 100,000hrs Lifetime
- PC lens + Waterproof + Shockproof + Dustproof
- Easy to install with FREE High Quality Rubber Cover , No crack forever
- This listing features for 7 pieces double bullseye amber trailer marker lights and 7 pieces double bullseye red trailer side marker lights, 14 pieces in total. Each rv clearance light includes 2 pieces stainless steel screws for surface mounting;
- Dimensions: 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1" approx. and fit on standard 3" centers; The rectangular tiger eye led marker light features a replaceable, snap-on lens, and is hardwired with 2 wires to mount to any surface: black is ground and red is positive;
- Each 2x4 led marker light come with 10 super bright LEDs and operate within a wide 9-14.8V DC range. Rather than double bullseye led marker lights, people also call these rectangle led trailer marker lights as "tiger eye led marker lights" or "double bubble led marker lights". You can truly mount this rv camer marker light anywhere on the truck;
- As many bullseye marker lights on market have the wires exit from the corner, our led markers have the wires exit form the middle. Also they come with the led chips, not the led diodes, which will be brighter and have longer lifetime. These 12V rectangle LED lights are universally for most trucks, trailers, pickups, RVs, Campers etc. esp. ideal for cab and sleeper panels;
- Warranty: We will offer 1 YEAR WARRANTY for these rectangular led marker lights since you place the order. Please feel free to send us email if there's any issue before or after purchase and we will reply in 24 hours;
- Package Includes: The package will contain 3/4" 10 pcs of Amber Lights + 10 pcs of Red Lights + 10 pcs of White Lights Round Trailer Side Indicator Marker 12V DC suitable for Truck, Caravan, Bus, Pickup, RV, Lorry, etc.
- High Brightness: Each Light Comes with 3 pcs of High Quality SMD LED existing 50,000 hrs for Working Life with an energy-saving bulb that gives about 60 lumens which outputs high luminous efficiency to save your life on the road.
- Qualifications: Waterproof, shockproof, weatherproof, dustproof and vibration proof, come with good design sturdy and durable with high quality materials, such as silicone rubber housing and PC lens, which have no shade color.
- Warranty: Our products come with a 1-year warranty. If a customer has some questions or any issues with using our product, or the lights are defective, please directly contact us for advice and remedy.
- Installation: Easy to install with no screws, drill a hole to put the rubber grommet and mount the lights onto the rubber. It contains two free end wires including; Black for positive, and white for negative.
Last update on 2024-06-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.