“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA Campaign Number: 18V730
Manufacturer Yamaha Motor Corporation, USA
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 1,902
Insufficiently Tightened Engine Oil Hose Flare Nut
An oil leak onto the rear tire can cause a loss of control, increasing the risk of a crash.
Summary
Yamaha Motor Corporation, USA (Yamaha) is recalling certain 2015-2018 Yamaha SR400 motorcycles. The engine oil line flare nut may be insufficiently tightened, allowing oil to leak onto the rear tire.
Remedy
Yamaha will notify owners, and dealers will inspect the flare nut connection. If oil is not leaking, the nut will be tightened. If oil is leaking, the engine oil line will be replaced and the flare nut will be tightened, free of charge. The recall is expected to begin October 29, 2018. Owners may contact Yamaha customer service at 1-800-962-7926.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Miscellaneous Document – Regarding: Certain 2015 through 2018 model SR400 Motorcycles, Oil Line Leak Inspection and Repair, Factory Modification Campaign.
October 15, 2018
https://static.nhtsa.gov/odi/rcl/2018/RMISC-18V730-1551.pdf
Recall Acknowledgement
October 24, 2018
https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V730-2442.pdf
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V730&docType=RCL
- Formulated with Trizone technology to protect all 3 critical zones: engine, clutch and gearbox
- Race derived technology for maximum engine acceleration
- Extreme high temperature air-cooled performance and water-cooled engine performance
- Excellent shear stability to prevent viscosity breakdown
- Exceeds API SL and JASO MA-2
- 100% Synthetic Ester
- Formulated To Meet The Latest Manufacturers' Specifications
- Improved High Temperature Deposit Protection And Sludge Control
- Ensures Optimum Clutch Performance At Start-Up, Acceleration, And Full Speed
- Standards: Ape Sn, Jasso Ma2
- Optimal lubrication in all operating conditions, ensures low oil consumption
- Very high shear and ageing stability, highest levels of wear protection
- Tested and approved for catalytic converters, optimal engine cleanliness
- Ideally suited for wet clutches
- Specifications and Approvals: API, SM, ACEA A3-04, JASO, MA2
- 100% Synthetic Double Ester
- Designed for highly modified engines
- Electrochemical bonding to metal parts
- Up to 5x higher film strength
- 0% shear loss on Bosch ASTM D6278 test
- Full synthetic 5W-40 diesel engine oil with Triple Protection Plus technology protects against wear, deposits, and oil breakdown
- Improved wear performance with significantly increased level of protection against harmful engine wear (compared to previous generation API CJ-4 engine oils)
- Enhanced fuel economy capability of 1.5% without compromising engine protection or durability (compared to 15W-40 oils)
- Multi-functional dispersant additives provide an enhanced level of protection against the effects of soot, dirt, and other contaminants
- Resists breakdown by heat to provide continuous protection throughout the service interval, and also provides improved low-temperature flow compared to conventional 15W-40 oils
- Optimal lubrication in all operating conditions, ensures low oil consumption
- Very high shear and ageing stability, highest levels of wearing protection
- Tested and approved for catalytic converters, optimal engine cleanliness
- Ideally suited for wet clutches
- Specifications and Approvals: API, SM, ACEA A3-04, JASO, MA2
- XPS synthetic 4-stroke oil is specifically engineered to meet the particular lubrication requirements of Can-Am, Spyder and Sea-Doo vehicles equipped with Rotax 4-TEC 4-stroke engines.
- Powersport formula with premium anti-wear and anti-corrosion additives
- Designed for high-performance off-road, on-road and PWC 4-stroke engines, including turbo or supercharged Powersports engines
- Provides superior engine and transmission protection against rust and corrosion even in extreme conditions
- Ambient temperature operating range: -31°F / 104°F (-35°C / 40°C)
Last update on 2024-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.