“This site contains affiliate links for which OEMDTC may be compensated” |
June 4, 2024 NHTSA CAMPAIGN NUMBER: 24V398000
A sudden loss of steering control increases the risk of a crash.
NHTSA Campaign Number: 24V398
Manufacturer Mack Trucks, Inc.
Components STEERING
Potential Number of Units Affected 790
Summary
Mack Trucks, Inc. (Mack) is recalling certain 2025 Mack AN, GR, and TE trucks. The drag link may contain an improperly heat-treated ball stud that can fail, resulting in a sudden loss of steering control.
Remedy
Owners are advised not to drive their vehicles until the remedy has been completed. Dealers will inspect and replace the drag links, as necessary, free of charge. Owner notification letters are expected to be mailed August 2, 2024. Owners may contact Mack customer service at 1-800-866-1177. Mack’s number for this recall is SC0465.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
May 25, 2024: Mack was notified from supplier of the potential that experimental ball studs were shipped in error.
May 28, 2024: Product Safety Evaluation Committee informed of a potential issue involving experimental heat treated ball studs. Investigation opened with testing results on-going.
May 29, 2024: Failure of the ball stud during vehicle operations within our factory with no personnel injury or property damage.
May 30, 2024: Product Safety Evaluation Committee evaluates and raises to Product Safety Committee.
May 30, 2024: Product Safety Committee determination of product defect. The committee also determined that owners must be notified and instructed to not drive their vehicles until repairs have been completed.
There have been no accidents or injuries associated with this issue, there have been no warranty, or customer complaints. There is one occurrence of a ball stud failure at the factory.
3 Affected Products
Vehicles
MAKE | MODEL | YEAR |
MACK | ANTHEM (AN) | 2025 |
MACK | GRANITE (GR) | 2025 |
MACK | TE | 2025 |
2 Associated Documents
Recall 573 Report
RCLRPT-24V398-5496.PDF 215.281KB
Recall Acknowledgement
RCAK-24V398-2256.pdf 645.863KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=24V398&docType=RCL
- COMPATIBILITY – Fits 2018-2018 Jeep Wrangler JK; 2007-2017 Jeep Wrangler
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- COMPATIBILITY – Fits 2011-2016 Ford F-250 Super Duty; 2011-2016 Ford F-350 Super Duty
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- Powdered metal gusher bearing design enables grease to flow through bearing
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Exclusive cover plate protects against debris leaking into the bearing surface
- COMPATIBILITY – Fits 2006-2008 Dodge Ram 1500; 2003-2008 Dodge Ram 2500; 2003-2008 Dodge Ram 3500; 2018-2018 Jeep Wrangler JK; 2007-2017 Jeep Wrangler
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- Direct Fit, OE Replacement Steering Kit
- Kit Includes: (1) Front Lower Outer Drag Link; (1) Front Outer Tie Rod; (1) Front Inner Tie Rod; (2) Front Tie Rod Adjusting Sleeves; (1) Front Upper Outer Drag Link
- Vehicle Specific: Check fitment information in the listing for compatibility
- OE Reference Number(s): 52060048AD,52060049AE,52060053AE
- Aftermarket Reference Number(s): 5086143AB,52037600,52060054AB,531289,537088,DS300005,DS300043,DS800982A,ES2012S,ES3624,ES800594,ES800983S,K6665,MES2012S,MES3624,MS25041,MS25614,MS25615,MS25657,SUS06697,SUS07469,SUS07977,SUS07978,SUS07979
- COMPATIBILITY – Fits 2005-2010 Ford F-250 Super Duty; 2005-2010 Ford F-350 Super Duty
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- Powdered metal gusher bearing design enables grease to flow through bearing
- Patented cover plate design allows for tighter tolerances vs traditional designs for a more durable part
- Exclusive cover plate protects against debris leaking into the bearing surface
- Backed by superior materials and rigorous testing, MOOG outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- COMPATIBILITY – Fits 2011-2013 Ram 2500; 2011-2012 Ram 3500; 2013-2013 Ram 3500; 2003-2008 Dodge Ram 2500; 2009-2010 Dodge Ram 2500; 2003-2008 Dodge Ram 3500; 2009-2010 Dodge Ram 3500
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- COMPATIBILITY – Fits 1997-2006 Jeep Wrangler; 1997-2006 Jeep TJ
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- COMPATIBILITY – Fits 2017-2022 Ford F-250 Super Duty; 2017-2022 Ford F-350 Super Duty
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat processed to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Inhibits corrosion and wear by allowing new lubricant to flush debris
Last update on 2024-06-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.